Public bug reported:
Binary package hint: nvidia-glx-new
I have Geforce 6200 LE graphics card with AMD64 desktop. If I enable the
restricted driver, then I'm told to restart the machine. Everything is
fine except after log into gdm. Suddenly, the monitor lost the DVI
signal and shows a blank scre
Here is the detailed information of my system.
I installed ubuntu hardy beta version and my current system is up to
date.
The machine is AMD64X2 + ASUS M2A-VM HDMI motherboard.
Though there's a integrated video card, but I use an independent one (evga
Geforce 6200 LE).
--
nvidia restricted d
corresponding log file is attached.
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/13104961/Xorg.0.log
--
nvidia restricted driver cannot be enableed
https://bugs.launchpad.net/bugs/211158
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
attached is the config file when I tried to enable the restricted driver
and corresponding log file.
** Attachment added: "the config file after I tried to enable the restricted
driver"
http://launchpadlibrarian.net/13104945/xorg.conf
--
nvidia restricted driver cannot be enableed
https://
Can you please add more steps to reproduce this bug? It's not clear to
me when this happens although I have found the problem in the source
code. It is hardly to test it even when I make change to code.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Thanks for your reply. I have switched to a kernel without ipv6
support. But it still can not reproduce the error you described as
below.
virsh # net-start Virtual_Cloud
error: Failed to start network Virtual_Cloud
error: cannot disable /proc/sys/net/ipv6/conf/virbr1/accept_ra: No such file or
d
As I stated earlier [2] Fedora 10, OpenSUSE 11, Mandriva 2009, and
Debian Lenny all use $HOME/Downloads. Ubuntu is the weird one. ;-)
[2] https://bugs.launchpad.net/ubuntu/+source/xdg-user-
dirs/+bug/204567/comments/3
--
downloads should go to $HOME/Downloads : XDG_DOWNLOAD_DIR should be set to
So can we drop 10_update_default_list.patch from xdg-user-dirs and fix
this already? Most other popular distros [1] use $HOME/Downloads.
[1] Fedora 10, OpenSUSE 11, Mandriva 2009, Debian Lenny.
--
downloads should go to $HOME/Downloads : XDG_DOWNLOAD_DIR should be set to
"$HOME/Downloads"
https
The synergy does not work in my ubuntu 9.04(release). Last week(9.04
beta version) it worked well.
Attached my configuration and synergy log. If there is any other
information for debugging this issue, please let me know. Thanks.
** Attachment added: "synergys configuration."
http://launchpa
Continued attachment.
synergy log.
Thanks.
** Attachment added: "synergy-error.log.tar.gz"
http://launchpadlibrarian.net/26039100/synergy-error.log.tar.gz
--
quicksynergy nor synergy work in 9.04
https://bugs.launchpad.net/bugs/352042
You received this bug notification because you are a mem
Just found it works in my ubuntu now. It was something wrong in Mac osx.
Please ignore my previous comments.
Thanks.
--
quicksynergy nor synergy work in 9.04
https://bugs.launchpad.net/bugs/352042
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
It works in my ubuntu 9.04(Jaunty) now.
As mkuutti commented before, I installed linux-backports-modules-jaunty-
generic.
Thanks.
--
[iwlagn] networkmanager applet cannot connect to WPA2 home network (intel 4965)
https://bugs.launchpad.net/bugs/348275
You received this bug notification because
Indeed. As an example, run-mailcap doesn't know how to handle
directories. So on non-KDE/Gnome desktops, xdg-open /home fail.
The fix is simple - do what upstream xdg-open does. Rather than bailing
out when run-mailcap fails, fallback to sensible-browser. Attached are
*trivial* patches for Hardy a
Correct, it only affects Dapper.
--
Wine causes process hang in kernel when running applications from FAT partition
https://bugs.launchpad.net/bugs/137978
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubunt
So does libgphoto2 in ia32-libs. It looks for port plugins in /usr/lib,
thus apps that depend on it cannot find any camera ports.
To reproduce:
1. verify 64-bit "gphoto2 --list-ports" outputs disk:/, usb:, etc
2. install lib32readline5
3. download 32-bit gphoto2 deb pkg
4. ar x gphoto2_2.4.0-1_i3
When the package maintainers backported CVE-2007-2878, [1] they made a
typo while adapting the code to kernel 2.6.15.
With [2] applied to the 2.6.15 source code, fat_ioctl_readdir() is as
follows:
...
down(&inode->i_sem);
ret = -ENOENT;
if (!IS_DEADDIR(inode)) {
ret = __fat_readdir(inode, fil
I'd like to see the fix go into the kernel. (Who do we have to nudge for
that to happen, BTW?) Though according to Google code search, Wine is
pretty much the only project that calls that ioctl. So I guess we can
just work around it if needed.
--
Wine causes process hang in kernel when running ap
Still a problem with Jaunty Alpha 6.
--
ia32 apps look for libs on the wrong place
https://bugs.launchpad.net/bugs/190227
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://l
I have the same problem, but different behavior.
The NetworkManager applet can connect to WPA2 home network, but it get
disconnected for every several seconds. And then the whole system does
not response any more(can't even switch to other tty console). Have to
power off the laptop to restart it.
Also attached dmesg and lspci result. Hope this will help identify the
root cause. Thanks.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory
Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root
Port (rev 0c)
00:19.0
Colin's test kernel works for me with Picasa 2.7 in Wine.
--
Wine causes process hang in kernel when running applications from FAT partition
https://bugs.launchpad.net/bugs/137978
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
As one more reason to switch away from ~/Desktop, .desktop files are
attack vectors for malware. [3] Saving them to ~/Desktop just makes it
worse.
[3] http://cubist.cs.washington.edu/Security/2009/03/13/linux-desktop-
security-vulnerabilities/
--
downloads should go to $HOME/Downloads : XDG_DOWN
Michael, why do you think it's so hard for users to find their downloads
in the most obvious place for downloads ~/Downloads?
On Windows Vista, IE/Firefox saves downloads to
c:\Users\username\Downloads. There's no link to the Download folder on
the Windows desktop, yet Windows users can someho
I filed a bug upstream:
http://bugs.freedesktop.org/show_bug.cgi?id=23280
** Bug watch added: freedesktop.org Bugzilla #23280
https://bugs.freedesktop.org/show_bug.cgi?id=23280
--
xdg-open should use xdg-mime instead of run-mailcap when no DE detected
https://bugs.launchpad.net/bugs/220765
Yo
** Attachment added: "the crash info"
http://librarian.launchpad.net/5568738/_usr_bin_glxinfo.1003.crash
--
Launching beryl - crash
https://launchpad.net/bugs/77487
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
Binary package hint: mesa-utils
Ubuntu Edgy
Switched from NVIDIA driver 9631 to 7184 and started having the problem.
** Affects: mesa-utils (Ubuntu)
Importance: Undecided
Status: Unconfirmed
--
Launching beryl - crash
https://launchpad.net/bugs/77487
--
ubu
Public bug reported:
There's a race condition in libXext that causes apps that use the X
shared memory extensions to occasionally crash. [1][2] This has been
fixed upstream with a small patch. [3] Can we cherrypick this for all
affected releases? (Hardy to Karmic)
[1] http://lists.freedesktop.org
Hi, the requested logs are irrelevant because I cannot reproduce the
race condition on my machine. I only know about it because the
aggregated reports from Google Chrome's crash logger show this crash
happening.
This affects any application that calls XShmAttach(). The fix is pretty
clear. Please
FYI, this patch may fix all the crashes for xcb_io.c:378: _XAllocID:
Assertion. There's many instances of this bug in the Ubuntu bug
database, i.e. bug 458989.
--
Race condition in libXext
https://bugs.launchpad.net/bugs/519576
You received this bug notification because you are a member of Ubuntu
Ping. Please reopen. I realize Lucid is almost out, but Hardy will be
supported for a while longer. Please at least backport this to Hardy.
--
Race condition in libXext
https://bugs.launchpad.net/bugs/519576
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
Umm, I know it's fixed in Lucid, which is why this bug report is asking
for the fix to be backported to Hardy - Karmic.
--
Race condition in libXext
https://bugs.launchpad.net/bugs/519576
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
Public bug reported:
Binary package hint: flashplugin-nonfree
The Flash plugin will crash if libcurl is not available. Flash should
depend on a package that provides libcurl. Specifically, I think it
requires libcurl3, but please double check.
** Affects: flashplugin-nonfree (Ubuntu)
Import
Can someone reopen this please?
--
Race condition in libXext
https://bugs.launchpad.net/bugs/519576
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
I've observed this in a Karmic virtual machine when the host machine is
accessing the disk heavily. It looks like the cause is due to the
shutdown being too slow. I filed a bug upstream:
http://code.google.com/p/chromium/issues/detail?id=39106
** Bug watch added: code.google.com/p/chromium/issues
@Michael Terry: what patch did you throw over the wall to xdg-utils?
URL?
Xdg-open calls gnome-open and kfmclient to open urls. Gnome-open and
kfmclient checks certain GNOME / KDE settings to figure out how to
handle urls. Xdg-settings works by checking those same settings.
Please remember the xd
@Michael Terry: I was mainly trying to address the x-www-browser issue.
I missed your patch in this bug report earlier. Yes, I agree sorting
this out in xdg-utils is the way to go. I've commented on the bug
upstream.
--
When chromium is the only browser installed, i'm still asked to make it the
What's the problem exactly? Please elaborate.
Did you get the "Chromium didn't shut down correctly" message on the
startup after restarting / logging back in?
--
does not terminate at computer shutdown
https://bugs.launchpad.net/bugs/537402
You received this bug notification because you are a me
@da-bzzz Thank you. 4.16.0-041600-generic solved my problem. All other
solutions mentioned in this thread did not work for me.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1774950
Title:
Suspend f
Hi Tyler, I just tested it on my PC.For me, the problem persists. My
computer still freezes on resuming. Switched back to 4.10. thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
I had the same issue. Expecting someone to fix it, but still none
update.
right now I have to use 4.10 to have resume work
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1743094
Title:
[regression]
Can confirm that after the latest BIOS update from ASUS, I'm also able
to boot OK into Ubuntu without the dis_ucode_ldr option.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
Title:
intel-mic
@bellengc, you'd need to open up your Terminal to make a more permanent
edit to your grub bootfile. Once you have the terminal open, type in:
cd /etc/default
sudo vi grub
This will open up a text editor in your terminal. You're going to be
making edits to your bootfile so it's a good idea to copy
Seems like this bug could be related to:
https://bugs.launchpad.net/ubuntu/+bug/1829735?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829784
Title:
acpi(probably) random hang on boot
To manage no
Anyone here think that this:
https://bugs.launchpad.net/ubuntu/+bug/1829735 could be either a dupe of
this bug or related?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
Title:
intel-microcod
Thanks Mark & Chris! Appreciate your help in diagnosing and finding this
temporary workaround. Will keep my eyes on this thread for when there's
a more permanent fix.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchp
For my case, I simply cannot update the systemd to solve this problem
since the address I want to bind belongs to virtual tunnel device which
only gets added when there is a new tunnel connection. Oops!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Genius! This is not a bug. I am very flabbergasted to find out there is
a line of "NotShowIn=GNOME;" in the desktop file since I try to debug
why the start center simply don't show up in the gnome app search
results. When you edit multiple kinds of office files, the start center
is extremely usefu
Per the above, are we safe to grab the latest kernel upgrades now and do
away with the dis_ucode_ldr workaround in grub at this point?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1829620
Title:
in
@hendrikc could you confirm if the hibernation works on your system? I
got 4.15.0-33-generic and nvidia-390.48, nvidia 1080ti, i7, I can
suspend the system but not hibernate.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
For me, the same issue remains but I suspect it is related to Nvidia
driver, since after I removed nvidia driver, both suspend and hibernate
work normal with this new kernel. I used the proprietary tested
Nvidia-390.48 driver on Nvidia 1080.
With this new kernel, I tested hibernate with the open
I tried kernel 4.17.0-7.8 from cosmic on Ubuntu bionic and got some
issues. After installing the 4.17 kernel, I tested my PC and found it
can hibernate normally. But, later on I found the kernel was not
compatible with Nvidia-driver 390.48 that was from Ubuntu bionic
release. Purging and reinstalli
@Marc Singer, thanks for the 4.10 kernel! It works fine on my Gigabyte
AB350M Gaming 3 + Ryzen 1700 system, SATA, audio, networking and video
(Nvidia 381.09 manually installed) all work fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Finally figured out that the 'msi_irqs' directory can't show once the tg3
interface is down.
When I make it up manually, the directory can appear.
So looks an invalide report.
** Changed in: linux (Ubuntu Xenial)
Status: Incomplete => Invalid
--
You received this bug notification becaus
0.9.3
Sent from my iPhone
> On Feb 21, 2017, at 10:16 AM, Chuck Short wrote:
>
> Which version is this with?
>
> ** Changed in: voluptuous (Ubuntu)
> Status: New => Incomplete
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.lau
@Marc, thanks again for the Kernel! It works great on my GA-AB350M-
Gaming 3 + Ryzen 1700 + NVIDIA 381.22. Audio, SATA, NVME SSD all work
fine with the new kernel.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.
Public bug reported:
1, The problem can be observed on both nova controller node and nova-
compute node
2, the bug should be introduced recently, and looks the nova-compute
package 2 weeks ago looks fine.
3, error log from nova-compute.log:
2013-12-28 11:30:01.697 1222 ERROR object
[req-3ec971
Public bug reported:
1, during install:
Setting up nova-compute (1:2014.1~b1-0ubuntu2) ...
start: Job failed to start
invoke-rc.d: initscript nova-compute, action "start" failed.
dpkg: error processing nova-compute (--configure):
subprocess installed post-installation script returned error exit s
Public bug reported:
debian.master/config/arm64/config.common.arm64:74:# CONFIG_VIRTIO_NET is
not set
On ubuntu-trusty, CONFIG_VIRTIO_NET isn't set, so it is not good to enable
ubuntu-trusty
kernel for arm64 VM.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tag
Public bug reported:
Without attached patch, we can't create VM on arm64 with KVM.
** Affects: libvirt (Ubuntu)
Importance: Undecided
Status: New
** Attachment added: "libvirt-fix-arm64.patch"
https://bugs.launchpad.net/bugs/1265425/+attachment/3938981/+files/libvirt-fix-arm64.
Public bug reported:
The patch(lxc: Fix a bug of baselineCPU parse failure ) in the below link is
needed for starting nova-compute service successfully:
https://review.openstack.org/gitweb?p=openstack%2Fnova.git;a=commitdiff;h=3afa01611923168da349aa542a2b39301840c414
Otherwise, we may meet 'va
Hi Tim,
Looks I still don't see it is common for all ARCHs, see below please:
[ubuntu@ubuntu-trusty]$git config -l
core.repositoryformatversion=0
core.filemode=true
core.bare=false
core.logallrefupdates=true
remote.origin.fetch=+refs/heads/*:refs/remotes/origin/*
remote.origin.url=git://kernel.ub
I upgraded to the latest kernel package, and looks the problem is still
there, is it really released?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1308183
Title:
make_kpkg runs postinst scripts
To
The string "Add show desktop icon to the launcher" shows correctly in
Chinese.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1310503
Title:
gnome-control-center doesnt have all translations
To mana
Public bug reported:
1, script
QEMU=qemu-system-aarch64
$QEMU \
-enable-kvm \
-m 4096 \
-smp 4 \
-cpu host \
-M virt,gic-version=host \
-vga none \
-nographic \
-kernel $1 \
-initrd $2 \
-append "earlycon=pl011,0x90
Just found that it is caused by missing one '\'
** Changed in: qemu (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1612020
Title:
arm64: virt machine: no virti
Public bug reported:
The following code will trigger a type error
##
import voluptuous
import voluptuous.humanize
import voluptuous.error
allowed_value = [1, 2, 3]
base = voluptuous.Schema({
voluptuous.Required('age'): int,
voluptuous.
** Tags removed: verification-needed-yakkety
** Tags added: verification-done-yakkety
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1647793
Title:
Yakkety: arm64: CONFIG_ARM64_ERRATUM_845719 isn't e
On Fri, May 13, 2016 at 7:22 AM, dann frazier
wrote:
> I used ftrace to do some duration measuring of the timer function
> fb_flashcursor(). I noticed several places where this timer takes around
> 98 ms to complete. This time seems to be due to multiple calls to
> __memcpy_toio() in ast_dirty_upd
On Mon, May 16, 2016 at 5:25 PM, Ming Lei wrote:
> On Fri, May 13, 2016 at 7:22 AM, dann frazier
> wrote:
>> I used ftrace to do some duration measuring of the timer function
>> fb_flashcursor(). I noticed several places where this timer takes around
>> 98 ms to complet
On Tue, May 17, 2016 at 12:12 PM, Ming Lei wrote:
> On Mon, May 16, 2016 at 5:25 PM, Ming Lei wrote:
>> On Fri, May 13, 2016 at 7:22 AM, dann frazier
>> wrote:
>>> I used ftrace to do some duration measuring of the timer function
>>> fb_flashcursor(). I notice
Public bug reported:
When building samba package on trusty/arm64 with gcc-4.8, the following
build crash can be observed, and it can be triggered with gcc-4.7 too.
01:07:10 runner /usr/bin/gcc -g -O2 -fstack-protector --param=ssp-buffer-size=4
-Wformat -Werror=format-security -fPIC -D_REENTRANT
Follos the steps to reproduce the issue:
1, find a arm64 machine or VM, which is installed trusty
2, prepare for building samba:
sudo apt-get -y install dpkg-dev fakeroot
sudo apt-get -y build-dep samba
3, download the following samba source:
wget
https://launchpad.net/ubuntu/+archive/primary/+
Please see the gcc-4.8 crash log on trusty/arm64, which includes the gcc
flag and PreprocessedSource.
** Attachment added: "gcc-4.8 crash log on trusty/arm64"
https://bugs.launchpad.net/ubuntu/+source/gcc-4.8/+bug/1584602/+attachment/4669037/+files/_usr_lib_gcc_aarch64-linux-gnu_4.8_cc1.0.cra
** Changed in: gcc-4.8 (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1584602
Title:
internal compiler error: in fixup_reorder_chain,, at cfgrtl.c:3336
To m
On Tue, May 3, 2016 at 10:35 AM, dann frazier
wrote:
> On Fri, Apr 29, 2016 at 2:06 AM, Ming Lei <1574...@bugs.launchpad.net> wrote:
>> It can be triggered 100% by running 'tcpdump -I ethX'.
>
> Thanks Ming. I let that run for a few hours, but was unable to
>
On Tue, May 3, 2016 at 1:14 PM, Radha Mohan Chintakuntla
wrote:
> Ming,
> The "-I" option of tcpdump is monitoring mode typically applicable only to
> wifi interfaces. So even if you run it on Thunder's NIC interfaces it will
> return saying that this is not supported.
>
Even without the '-I',
Public bug reported:
When running 'stress-ng --all 64 -t 800 -v' on Xenial/ARM64, the following
kernel oops is triggered.
[ 93.309158] Unable to handle kernel NULL pointer dereference at virtual
address 0038
[ 93.309160] pgd = 8007a5914000
[ 93.309163] [0038] *pgd=0047a5
The issue can be reproduced on '4.4.0-22-generic #38' too
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1575506
Title:
Xenial: ARM64: Unable to handle kernel NULL pointer dereference at
virtual ad
** Changed in: linux (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1575506
Title:
Xenial: ARM64: Unable to handle kernel NULL pointer dereference at
Upstream 4.6-rc6 hasn't this problem
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1575506
Title:
Xenial: ARM64: Unable to handle kernel NULL pointer dereference at
virtual address 0038
To ma
On Wed, Apr 27, 2016 at 4:31 PM, Ming Lei <1575...@bugs.launchpad.net> wrote:
> Upstream 4.6-rc6 hasn't this problem
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1575506
>
> Title:
On Thu, Apr 28, 2016 at 9:55 PM, Tim Gardner wrote:
> Ming - please try the kernel at
> http://people.canonical.com/~rtg/lp1575506/ - I've updated AUFS to the
> latest stable branch. Source at git://kernel.ubuntu.com/rtg/ubuntu-
> xenial.git aufs
Looks no difference by installing the new kernel o
It can be triggered 100% by running 'tcpdump -I ethX'.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1574814
Title:
ThunderX: soft lockup in cursor_timer_handler() Edit
To manage notifications abou
With Shuduo's help, looks the only solution for this issue is to run reset-state
by the tools in the following link:
https://github.com/zyga/devtools/blob/master/reset-state
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs
On Thu, Nov 3, 2016 at 5:42 AM, Kamal Mostafa wrote:
> Ming Lei comment #2 says you're the author of this patch to the hio
> driver:
>
> +#if (LINUX_VERSION_CODE >= KERNEL_VERSION(4,3,0))
> + blk_queue_split(q, &bio, q->bio_split);
> +#endif
> +
Public bug reported:
CONFIG_ARM64_ERRATUM_845719 should be enabled in Yakkety, but it isn't.
** Affects: linux (Ubuntu)
Importance: Undecided
Status: Incomplete
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://b
** Description changed:
-
- CONFIG_ARM64_ERRATUM_845719 should be enabled in Yakkety, but it isn't.
+ CONFIG_ARM64_ERRATUM_845719 should have been enabled in Yakkety, but
+ it isn't actually.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
Hi,
The attached patch should fix one related issue, could anyone test it?
Thanks,
** Patch added: "fix crash"
https://bugs.launchpad.net/ubuntu/+bug/1546439/+attachment/4615924/+files/0001-block-partition-initialize-percpuref-before-sending-.patch
--
You received this bug notification bec
Public bug reported:
[Impact]
- no grub.efi generated by d-i on arm64, and arm64 server have been switching
to uefi/grub already,
so arm64 server can't be installed via trusty d-i
[Test Case]
- no grub.efi generated from the following link:
http://ports.ubuntu.com/dists/trusty-updates/main
** Branch linked: lp:~tom-leiming/debian-installer/trusty-for-
generating-netboot-tarball
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1564653
Title:
trusty: arm64: no grub.efi generated by d-i
To
Same problem on precise. I recommend the package maintainer try to use
the tool he's packaging.
On precise, there's a one-line /usr/bin/pump file that contains the
include_server= line that should be in /usr/bin/distcc-pump. That line
is wrong though. It refers to python2.6 whereas on Precise the
Public bug reported:
There's a bug in distcc 3.1 where "distcc gcc -I/usr/include/foo" does
not work. This was fixed soon after the distcc 3.1 over 3 years ago. [1]
Please include this in your build, or just upgrade to distcc-3.2rc1.
[1] http://code.google.com/p/distcc/source/detail?r=638
** Aff
On Sun, Apr 22, 2012 at 4:38 AM, ashindeed <913...@bugs.launchpad.net> wrote:
> @Ming Lei
>
> I dont see that option, I guess that's because I am on desktop. I also
> tried 3.4.0-030400rc3 with the same result.
>
> So right now, I am on Oneiric kernel which does wo
On Mon, Apr 23, 2012 at 11:31 AM, ashindeed <913...@bugs.launchpad.net> wrote:
> I just ran cat /sys/kernel/debug/usb/usbmon/0u > /tmp/1.mon.out (because
> it was simpler, not sure whether its correct).
It is not easy to parse all traffic.
Suggest to only trace the usb bus in which the Quanta tou
Looks double click not wrorking is caused by X.org driver, :-(
On Mon, Apr 23, 2012 at 11:34 PM, Benjamin Tissoires
wrote:
> You can understand my email as a regression report for the Quanta touchscreen
> device, since it works well on 3.0 kernel, but double click stops working
> on 3.4-rc2.
We
On Fri, Mar 23, 2012 at 3:20 PM, Axis Mann wrote:
> I don't see the identified changes pushed onto the latest Lucid update.
> When will that happen?
Please update to Ubuntu-2.6.32-41.88 to fix your bug.
Thanks,
** Changed in: linux (Ubuntu Lucid)
Status: Fix Committed => Fix Released
On Sat, Mar 31, 2012 at 6:39 AM, Fahd Harb wrote:
> I have the same problem with ubuntu 11.10 64bit and samsung galaxy s2 with
> gingerbread 2.3.5
> please fix the bug for this release, thanks
Ubuntu-3.0.0-18.31(Oneiric) has applied the fix patch already, so please
update linux-image to fix your
Anyway, if you still have this kind of slow usb problem, please
post the usbmon trace(see guide in below link), otherwise it is
difficult to say where is wrong.
[1], http://www.mjmwired.net/kernel/Documentation/usb/usbmon.txt
Thanks,
On Sat, Mar 10, 2012 at 3:08 AM, adri58 <500...@bugs.launchpad
On Sat, Mar 31, 2012 at 9:32 PM, adri58 <500...@bugs.launchpad.net> wrote:
> USBMON trace:
The below is not usbmon trace at all, please read the doc in the link
below
http://www.mjmwired.net/kernel/Documentation/usb/usbmon.txt
then post out your usbmon trace.
Also you can refer to LP624
On Sat, Mar 31, 2012 at 11:55 PM, Dmole wrote:
> maybe Ming is trying to say, do this:
>
> 1) started a capture using this command:
> cat /sys/kernel/debug/usb/usbmon/1u > /tmp/1u.mon.out
>
> 2) connect the external drive
>
> 3) copy a file to the external drive
>
> 4) kill the capture with CTRL-
1 - 100 of 813 matches
Mail list logo
