I have had this problem as well with AT&T broadband and a Sierra
Wireless USBConnect 881 on a fresh install of Karmic. I was previously
using Jaunty and had no problems, and upgrading Jaunty to Karmic caused
no problems. A fresh install of Karmic exhibited this behavior.
Everything seemed to wor
I installed pulseaudio-modules-bt and it does give some new options for
sound output and possibly better sound, but microphone sound quality was
still iffy. Recorded sound on Audacity seemed better and was slightly
louder (according to the DB meter), but a test call on Microsoft Teams
was still muf
I can't seem to get the DG80 working correctly under PopOS 20.10. It
works great for listening to music (though that worked directly on
bluetooth without issues) but I can't seem to get the correct mode for
talk. Since you say you have success with it, I will play with it some
more before returning
I think the problem was in the headphones. I found I was having trouble
on my phone as well. I contacted Sony support and they had me try a soft
reset of the headset, which seems to have restored function. I am still
getting bad mic sound on bluetooth, but I think it is just the low
quality sound o
I am seeing this same problem, and a workaround is to use Liberation
Mono Regular font. For whatever design reason, the underscores are
visible in Geany with this font. Not an ideal solution, but it is a
workaround that lets you keep using Geany.
--
You received this bug notification because you
For those in a lurch because of this error, you can always install
Chrome (the non-open-source version) and use it until this situation is
cleared up. Chrome and Chromium seem to be able to exist side-by-side,
and when this is resolved you can remove it or switch back to Chromium
and just leave it
Tested with 4.10.0-041000rc2-generic. Still did not work. Camera light
comes on, but image on cheese screen is black. If I go to Cheese
preferences, I see Device as "Lenovo EasyCamera" but the dropdown menu
is greyed out and I can't select it.
Running [vlc v4l2:///dev/video0] gives me the video li
Just for grins, I also tested rc4. Same results. Here is the uname -a:
Linux rbmlenovo 4.10.0-041000rc4-generic #201701152031 SMP Mon Jan 16
01:33:39 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
I thought I had this same problem, but my camera is the 5986:055e ('e'
instead of 'a'), and it is still not working on kernel 4.8.0-34-generic
#36-Ubuntu.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/
Public bug reported:
I was following bug #1433906 in the hopes that it would fix the problem
with this device, and was instructed to open a separate bug for this.
The camera stopped working a few Ubuntu versions ago. It shows up in
lsusb as follows:
Bus 002 Device 003: ID 5986:055e Acer, Inc
Whe
Public bug reported:
I use multiple desktops to organize open applications. Also, I am
currently using multiple monitors. If I arrange my applications (e.g.
Chrome on the laptop screen of desktop one, Geany on the attached
monitor on desktop 1, another chrome on the laptop screen of desktop 2,
ano
Fix in #11/#82 fixed it for me as well...at least for sites like Amazon.
(Running 16.10)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1641380
Title:
chromium-browser: ERR_CERTIFICATE_TRANSPARENCY_R
I am having this issue when my laptop is connected to an external
monitor and I am using both screens side-by-side. It just started
happening after upgrade to 16.04. Was driving me nuts, but I just
discovered (following a reading of comment #41) that if I go to System
Settings -> Brightness and Loc
Referring to comment #41: only partial success. I am still getting
occasional window moves after locking the screen and walking away for a
bit, though much less frequent. And there doesn't seem to be a
correlation to being gone for five minutes or two hours.
--
You received this bug notification
I am seeing this as well but, oddly, only on specific connections. And
always to the same connections. I can't find any differences in
settings for the client between the connections that work properly and
the connections that don't work properly. I see this from my laptop,
which has been upgrad
I am having this issue, and I am up-to-date with all upgrades in the
12.04 beta. I have a HP Pavilion dv7 laptop with i7 quad core
processor, AMD/fglrx video driver. Under unity 3d, when I lock the
screen and it goes blank, the cpu and fan spin up. After unlocking and
bringing the screen back up
I am seeing what I believe is this bug. I am unable to shutdown without
first executing "sudo service rabbitmq-server stop" to shut down the
rabbitmq server. Unless I do this, instead of shutting down I am just
returned to the lightdm login screen over and over.
This happened both in 11.10 and i
With the 1.1.1 version installed on my HP Pavilion dv7, the two fingered
scroll is now available and works like a charm! The right-button patch
from bug #582809 doesn't appear to be compatible, but I haven't tried
installing the right button patch first and then this package. I do not
have a worki
I should add that (without changing any settings) I am getting right
click functionality if I double-tap with two fingers.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/308191
Title:
Multitouch supp
One final note on right-button functionality and then I stop bugging
you: The strip across the bottom area of my trackpad is a button.
Clicking anywhere on that button (right or left) with one finger is a
left-click and clicking anywhere with two fingers is a right click.
Theoretically, clicking wi
I am having the same problem with oracle java 7.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1238322
Title:
gradle not working: symbol lookup error
To manage notifications about this bug go to:
Also: If I download the gradle 1.8 zip from the gradle website, unzip it
into a directory, move to the bin directory, then type ./gradle, then
gradle works without problems.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
I have a brand new 15R with a fresh install of Ubuntu 12.04 (currently
on kernel version 3.2.0-24-generic with x86_64) and I am seeing the same
thing--showing up as a PS/2 mouse. Buttons and the pointer work fine
and are fully usable, but there are no touchpad configuration options
and no multitou
Kelvin's workaround in comment #6 did not work for me. The XP
connection always opens in a windowed fullscreen mode instead of a
fullscreen mode that takes up the whole screen. Even if I do the
workaround I mention in #5 (connect to a non-XP computer that does not
manifest the problem first, then
I am still seeing this problem in 14.10, even installed fresh on a new
laptop. I have found a workaround that takes care of the problem
automatically, though. There is a 1412 mtu hardcoded in /etc/vpnc/vpnc-
script, but that may not be relevant to network manager so I didn't mess
with that script.
Public bug reported:
I regularly connect to a cisco anyconnect vpn using vpnc through the
network manager. I am often at various different location using wifi,
including connecting via wifi to a cellular hotspot. Usually, when
connecting to a WIFI connection the MTU value (on the wifi connection
I am seeing this same behavior with indicators for SpiderOak and
BlueProximity. Both have been whitelisted. These indicators are
visible when I start the computer, but at some point they disappear
(usually after I suspend and resume, but sometimes without a suspend).
I can see the indicators if I
Also: entering "unity &" from a command line to restart Unity restores
the lost icons. Possibly interesting info: when the top panel is
rebuilding, the two missing icons appear first all the way to the right
and then the rest of the icons and clock, etc. are added.
--
You received this bug notif
Public bug reported:
I use vpnc through network manager. When I start up my laptop, at the
login screen the network manager finds my wifi connection and connects
before login. That is all good. But when I log in and then click on
the network manager applet to try and connect to a VPN connection
I like the ALT + ` switching...I didn't know about it either. But I
have an issue that seems to fall under this bug. When I have several
windows open including multiple terminal windows, if I alt-tab to the
terminals the wrong one is active. Terminal A sits behind Terminal B,
but Terminal A has
I have this same problem in beta 2. I don't see a battery indicator or
way to set the battery indicator as "always show". I am running on a HP
Pavilion dv7 laptop with Oneiric Beta 2 64 bit, upgraded from Natty.
--
You received this bug notification because you are a member of Ubuntu
Bugs, whic
I downloaded Dave's patch in #144 and followed the install instructions
in #152. On reboot, my computer would freeze during boot with the
ubuntu logo and the row of dots. Attempts to boot into "recovery mode"
also did not complete, with freeze for a minute or so and then a
stacktrace/dump scrolli
Dave: the only thing you have to apologize for is that you don't live in
Texas where I can buy you the beer you deserve for doing this. I am
testing the new version now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.lau
Still getting crashes/hang on boot with this driver on my N5110. No
change from the 0.1 to the 0.2 version. Nothing for psmouse gets logged
in the syslog at all. Following the steps within the build_alps
function of the README file, all is well until I execute the "sudo
modprobe -v psmouse". Th
* Do you get ANY errors/warnings when building the psmouse.ko dlkm?
No errors or warnings. The build works fine.
* What does "modprobe -v" report? It should be something like
"/lib/modules/3.2.0-30-generic/updates/dkms/psmouse.ko"
When I do the "modprobe -v psmouse" the crash happens. It happ
Dave,
I ran your 0.3 and it worked like a charm...no errors at all on either install
or reboot. A few items of note:
* The PS/2 mouse still appears in my xinput --list. Is that supposed to be the
case?
* After all the xinput setprops, I do have edge scrolling, but it works about
1/4 inch from
I am having this issue as well. The top-panel indicator icon appears at
boot, but seems to disappear some time later. Right now, I am looking
at dual monitors and the primary screen has the indicator icon in the
top panel, while the secondary monitor does not have the icon. No other
icons are mi
Why don't bug trackers have "+1" or "like" buttons? I would definitely
click it for Dave Turvene! I will see if I can try it, but I am
currently on 12.10 beta so I don't know if I want to over-experiment.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
*** This bug is a duplicate of bug 644524 ***
https://bugs.launchpad.net/bugs/644524
Any chance we can make #644524 public? I think its private status is
keeping the bug reporting from working correctly...when I get the crash
I am never taken to the bug, and I can't reach it except by googlin
No love with 3.4.0 kernel either (on 64 bit Ubuntu 12.04).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/606238
Title:
synaptic touchpad not recognized on dell latitude e6510 and others
To manage n
For Alessandro and others who have this working in Precise on an updated
kernel: is there something other than installing the kernel upgrade that
is necessary to make this work? Is there a config file that must be
changed or some other action to take?
--
You received this bug notification becaus
I had some success with 11.12 as well. I can't declare full victory
because I am having trouble using dual monitors with it--seeing some
problems with Gnome Shell that I am not seeing under unity such as
flickering and freezing (sometimes only on the external monitor). But
in general, I can use G
Today's update fixed the problem for me...gnome-alsamixer now runs
without crashing. I had not previously applied any patches, so this
definitely provided the fix. Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.
When I upgraded my N5110 to the raring ringtail beta last week, the
touchpad was no longer recognized. I believe I had the 0.4 version
installed. I uninstalled and removed all of the existing DKMS entries
and installed the 1.3 version downloaded from http://www.dahetral.com
/public-download but t
The code version from comment #356 fixed my problems mentioned in
comment #352. It works with Raring on the 3.8 kernel. I'm very happy
because reverting to the supersensitive, nonscrolling touchpad I had
before you wrote this driver was pretty unbearable. Thanks again for all
of your work on this.
While extreme sensitivity of the trackpad is not a huge deal while
clicking around on websites or other non-typing-related activities, I am
sure that many others are finding it as frustrating as I am to try and
type more than three words without the cursor relocating itself because
of an errant cli
I was also able to workaround with a link in /usr/bin:
sudo ln -s /usr/bin/node /usr/bin/nodejs
This creates the link globally, which may be the source for other grief
later on. But it lets coffee work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subs
This morning's update in 12.04 beta seems to have fixed the problem for
me. Top-right indicators are back and functioning normally. My screen
looked like Kearny's screenshot from comment #7, though the pictures of
my kids look much better than that red barn he has on his desktop ;).
I still have
This has fixed the duplicate problem. I still see the "(estimating...)"
instead of a battery time remaining when I click on the battery icon in
the panel. I am waiting to see if that resolves itself after the g-p-m
collects more data or if this issue still remains.
--
You received this bug noti
*** This bug is a duplicate of bug 751343 ***
https://bugs.launchpad.net/bugs/751343
Public bug reported:
Error occurred during upgrade using update-manager while in Unity 2d.
ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: gstreamer0.10-plugins-ugly 0.10.17-1
ProcVersionSignature:
*** This bug is a duplicate of bug 751343 ***
https://bugs.launchpad.net/bugs/751343
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/751520
Title:
package gstreamer0.10-plugins-ugly 0.10.17-1 fail
I ran update-manager again and the package installed without incident.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/751343
Title:
package gstreamer0.10-plugins-ugly 0.10.17-1 failed to
install/up
I am seeing this as well. Can't see a side panel, only the drop shadow
for top panel. I can still click the invisible top and get menus (e.g.
power, wifi connections, etc.). What info do you need to confirm it is
the same issue?
--
You received this bug notification because you are a member of
I am seeing this as well on an HP Pavilion DV7. In addition to the
duplicate line (which appears after I unplug the power cord), I always
see "estimating..." instead of a time to charge or discharge (though
this worked under Maverick, which I updated from). This behavior began
when I updated from
Compiz update today has resolved this problem for me. All panels are
now visible and work fine. For the first time since installing the Beta
a few days ago I have 3D Unity working properly.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
Just upgrade and reboot. I also had a few Margaritas at dinner. With
salt. That may have helped as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/745996
Title:
All unity windows are invisibl
Public bug reported:
Binary package hint: branding-ubuntu
reported a conflict with existing package
ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: branding-ubuntu 0.5
ProcVersionSignature: Ubuntu 2.6.38-8.41-generic 2.6.38.2
Uname: Linux 2.6.38-8-generic x86_64
NonfreeKernelModules: f
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/753923
Title:
package branding-ubuntu 0.5 failed to install/upgrade: trying to
overwrite '/usr/share/gnome-
games/quadrapassel/pixmaps/quadrapassel.s
Not sure what has been updated to affect this, but now the terminal menu
is integrated into unity. But the window location is still
incorrect...title bar is hidden under the top panel and flush with the
top edge of the screen.
--
You received this bug notification because you are a member of Ubu
I just did an update and an upgrade and a new version of apport and
apport-gtk were available. The problem was resolved, though the upgrade
did throw a warning that apport failed to start. I rebooted, and all
seems well. I was able to launch apport-gtk from the command line, so I
think it is fun
I wrote in comment #54 that I saw no additional problems, but I should
add that on my next upgrade (I used update-manager, if that matters to
anyone) I got a warning about needing a partial upgrade. I performed
the partial upgrade and everything processed without issues. I don't
see any signs of
Public bug reported:
Binary package hint: unity
For dealing with an earlier bug I added a gnome terminal to my startup
applications--Unity was not loading properly and this allowed me to do a
clean shutdown. Now Unity is working properly, but I still have the
Gnome Terminal in my startup applica
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/759898
Title:
Startup Application shows up with menu and bad location
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com
Following the instructions as graciously compiled by Johanna in comment
#94 has restored the right button functionality on my Hp Pavilion
dv7-4073nr under Ubuntu 10.10 (which disappeared when upgrading from
10.04 like others have noted). I still have random movements as my palm
brushes the pad, bu
I get this issue with Yahoo, though I am not getting requests through
any other services so I don't know if it is Yahoo only. The same thing
is happening on my Nokia N900 running empathy on Maemo. No matter how
many times I reject the request, it keeps popping up on both platforms
until I log int
65 matches
Mail list logo
