** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/21875749/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/21875750/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/21875751/Dependencies.txt
** A
Public bug reported:
Binary package hint: linux-image
I did an update. The output was:
Preparing to replace linux-image-2.6.27-11-generic 2.6.27-11.26 (using
.../linux-image-2.6.27-11-generic_2.6.27-11.27_i386.deb) ...
Done.
Unpacking replacement linux-image-2.6.27-11-generic ...
Running postrm
For me it's definitely not a disk space problem. I have 9GB available.
Furthermore it's not the number of old kernels in the menu.lst .. there are
only two.
probably its my setting of the default booted kernel.
default is set to "saved".
@Thad: as a beginner you should not do this manually.
*** This bug is a duplicate of bug 71698 ***
https://bugs.launchpad.net/bugs/71698
Hi,
I had the same problem and some time. I think I found the/a bug.
In line 189 of the file upgrade_backups.py:
seenfull = 0
for e in listing:
if seenfull < 1 and e.endswith( ".ful" ):
seenfull +
** Information type changed from Public to Public Security
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1193789
Title:
Allow multiple wired connections to be configured via network manager
panel
Public bug reported:
I observed that the blastall version included in the ubuntu package
produces results that are different from the results generated with
blastall from the binary distribution downloaded from NCBI. Of course
the same version is used (2.2.26).
The differences affect the computed
Public bug reported:
/var/log/dist-upgrade/main.log
2013-10-18 10:25:25,166 DEBUG blacklist expr 'unity$' matches 'unity'
2013-10-18 10:25:25,166 DEBUG The package 'unity' is marked for removal but
it's in the removal blacklist
2013-10-18 10:25:59,444 ERROR Dist-upgrade failed: 'The package 'uni
Here you go. I cleared the log, and then tried to enabled the account in
the account preferences dialog.
I roughly checked the file. I found a similar message as I get from
pifgin (too frequent connections).
Thanks
** Attachment added: "mission.txt"
https://bugs.launchpad.net/ubuntu/+sourc
Public bug reported:
Since the upgrade to precise pangolin I'm unable to connect to ICQ/AIM.
In the account preferences the message is "Disconnected -- Authentication
failed"
I found a forum entry:
http://ubuntuforums.org/showthread.php?t=1944629
As suggested I tried pidgin: In the original s
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/993952
Title:
authentication failed
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/empathy/+bug/993952/+subscri
This is the output of hp-info -i
** Attachment added: "hp-info-i"
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1018520/+attachment/4314190/+files/hp-info-i
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launch
apport information
** Attachment added: "PrintingPackages.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314175/+files/PrintingPackages.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314174/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
evin
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314179/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Hi,
sorry for the long delay. Here is the requested information
+ Ubuntu 14.04.1 LTS
+ the Printer is a network printer.
+ I post some additional information following the
DebuggingPrintingProblems page in the following.
Best,
Matthias
--
You received this bug notification because you are
apport information
** Attachment added: "Locale.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314172/+files/Locale.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
ev
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314178/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/101
apport information
** Attachment added: "UdevLog.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314181/+files/UdevLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314169/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
apport information
** Tags added: apport-collected trusty
** Description changed:
Evince printed pdfs shifted by about 2cm up - such that the Headline cant be
read.
I played around with the settings and now evince just prints entirely black
pages.
I switched to okular which works.
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314177/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314176/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314173/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
evin
The output of "lpinfo -v"
** Attachment added: "lpinfo-v"
https://bugs.launchpad.net/ubuntu/+source/cups/+bug/1018520/+attachment/4314191/+files/lpinfo-v
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314170/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
apport information
** Attachment added: "KernLog.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314171/+files/KernLog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1018520/+attachment/4314180/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
ev
I'm not sure how to run "hp-makeuri : " for the network
printer.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
evince prints shifted or black pages
To manage notifications about this
/usr/lib/cups/backend/snmp
network socket://192.168.2.114:9100 "HP Officejet 6500 E710n-z"
"Officejet 6500 E710n-z" "MFG:HP;MDL:Officejet 6500 E710n-z;CMD:MLC,PCL
,DW-
PCL,PML,802.11,802.3,DESKJET,DYN;1284.4DL:4d,4e,1;CLS:PRINTER;DES:CN557A;CID:HPIJVIPAV2;LEDMDIS:USB#FF#CC#00,USB#07#01#02,USB#FF#0
The problem is still occuring on the OfficeJet 6500. The printout is
shifted to the top of the paper if the margin is small sometimes a part
of the page is missing. It happens with any printed pdf from evince. I
do not know if it affects also other pdf viewers like acrobat or other
programs like
Hi. I recreated everything and checked everything twice. Still no right
click. I attached the xorg log file.
I will now delete the dir again and check what the difference is.
** Attachment added: "Xorg.0.log"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/947354/+
With deleted xorg.conf.d directory no difference can be seen. That is
the Xorg.0.log file is the same (apart from the times).
I will now read the links you sent me.
Thanks,
** Attachment added: "Xorg.0.log"
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/947354/+a
Is there something to be considered for the xorg.conf file?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/947354
Title:
Synaptics Soft Button Areas not working in HP Envy 14 Clickpad
To manage noti
Public bug reported:
Evince printed pdfs shifted by about 2cm up - such that the Headline cant be
read.
I played around with the settings and now evince just prints entirely black
pages.
I switched to okular which works.
Please tell me if I can provide additional information. Printer is a
O
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1018520
Title:
evince prints shifted or black pages
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/
Just want to mention that the "problem" still exists (Ubuntu precise +
gnome 3). I'm using QWERTZ (on my laptop built in keyboard) and QUERTY
on my english keyboard which I prefer for programming.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
This did it! That is the 2nd option. I did not try the other option.
Nevertheless I suggest to leave the bug open. The clickpad should be
recognised automatically. Ideally also usable values should be preset.
Alternatively a tool to adjust the values would be nice.
So, thanks for the help.
Matthi
Public bug reported:
When I plug in the headphone sound is muted for the speaker (which is
nice) as well as the headphone.
Setting the Connector in the "Sound settings" to Speaker enables both
(headphone and speaker).
I searched the internet. It was suggested to add:
a line:
options snd-hda-i
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1020676
Title:
ALC269VC speaker headphone troubles
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+b
Need to add that this line did not solve the problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1020676
Title:
ALC269VC speaker headphone troubles
To manage notifications about this bug go to:
Here are the contents
ls /usr/share/X11/xorg.conf.d/
10-evdev.conf
11-evdev-quirks.conf
11-evdev-trackpoint.conf
50-vmmouse.conf
50-synaptics.conf
50-wacom.conf
51-synaptics-quirks.conf
I also played around with synclient. But I was not able to find a
satisfying setting. I
Thanks. Just for curiosity. Can you tell me if and how this will make
its way in the ubuntu repositories?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1009027
Title:
incorrectly installed
To manag
Public bug reported:
When running mafft I just get the following message:
"""
correctly installed?
mafft binaries have to be installed in $MAFFT_BINARIES
or the /build/buildd/mafft-6.850/debian/mafft/usr/lib/mafft/lib/mafft directory.
"""
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: maf
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1009027
Title:
incorrectly installed
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mafft/+bug/1009027/+subscri
Thanks for the reply. I tried your suggestion and disabled all
InputCLlass related things in xorg.conf.
Unfortuntely this does not solve the problem. There is no right click.
Also the left button does not work properly. If I click then the mouse
always moves a bit and marking text by holding the l
Public bug reported:
I use an external amplifier connected via the headphones connector of
the latzop (Samsum 700Z). When starting up I do not hear any music, but
I need to change the "Connector" setting in the output settings to
"Speakes" . Then Both outputs are active, i.e. I hear musc through t
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1010818
Title:
[700Z3A/700Z4A/700Z5A/700Z5B, Realtek ALC269VC, Speaker, Internal]
Speaker Headset Playback problem
To manage notifications about this
Same here
uname -a
Linux sirius 3.2.0-24-generic #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012
x86_64 x86_64 x86_64 GNU/Linux
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/804943
Title:
blcr kernel
I am also affected by the bug. Any permanent workaround or solution
would be much appreciated.
Regarding the gnome-tweak-tool : what is the exact name of the option in
the typing panel. I can not locate anything that seems helpful.
Thanks in advance.
--
You received this bug notification becaus
I can confirm this problem for a Samsung Series 7. I found a partial
solution for this.
Check if the ClickPad option is on (synclient -l | grep ClickPad). You
can set it with: synclient ClickPad=1. Then you need to tell the areas
that should be considered as right or middle mouse botton. With
sync
I agree.
Maybe these links are helpful:
http://ubuntuforums.org/showthread.php?t=1865577&page=121
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/944961
there seems to be a script in a ppa setting theright button area
automaticall. I had no time to test. Hope that I f
Public bug reported:
the dependency of the package to python-glade2 is not automatically
resolved. Note, a analogous report exists for system-config-samba:
https://bugs.launchpad.net/ubuntu/+source/system-config-
samba/+bug/673737 . So maybe the problem is deeper.
ProblemType: Bug
DistroRelease:
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/885238
Title:
system-config-date dependency
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/system-config-date/+
Public bug reported:
The latest (natty) init script of lm-sensors sets a variable
PROGRAM=/usr/bin/sensors
at the beginning. but it does not use it.
** Affects: ubuntu
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs
> First question: what version of Hugin are you using, and from where:
> - the one that is distributed via the standard Ubuntu repositories?
> - the stable Hugin from the Hugin PPA [0]?
> - the nightly Hugin from the Hugin PPA [0]?
> - Hugin from another source / self built - please specify the det
> > The list of control point detectors is
> > autopano-sift which is selected as default
> > autopano-sift-c
> > panomatic
> > macht-n-shift
> > align image stack
>
> What is the content of /usr/share/hugin/data/default.setting on your
> machine?
>
Its attached. The file is identical to [3] on bo
I stumbled over this because I compiled lmsensors by myself but wanted
to use the provided init script. I changed the PROGRAM variable to the
alternative location and expected that it works.
If I set an variable then I expect that it is used. So its not a bug in
the sense that it does not work - c
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/817889
Title:
hugin autopano dependance
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hugin/+bug/817889/+subsc
Public bug reported:
Hi,
huging uses autopano-sift as default for control point detection but the
corresponding package was not installed automatically.
This applies to a fresh install of natty as well as to upgrade from previous
versions.
Matthias
ProblemType: Bug
DistroRelease: Ubuntu 11.
Hi,
I'm using 2 computers. One is a fresh install and the other upgraded
over many ubuntu version with preinstalled hugin. On both computers
hugin was not working per default. No control points were found. As far
as I remember autopano was selected - but maybe I did this. I can't
remember 100% for
60 matches
Mail list logo
