Hello there,
I can confirm having this bug too. Two different machines, both with
different Nvidia graphics cards. Running Hardy now but I think I had it
at least back in Gutsy, maybe even in Feisty.
Regs.
--
Evolution cursor creates a track.
https://bugs.launchpad.net/bugs/237002
You received
Hello there,
I got exactly the same problem when upgrading from Gutsy to Hardy, or
probably rather after running the update manager afterwards. I've played
around in BIOS to find a solution but without luck and went on to test
boot parameters more or less randomly. After testing a parameter
sequen
I'm really not fluent in these matters and part of what you wright is
really beyond me. However, the motherbord on the plagued PC is an MSI so
it's not impossible that it's got a BIOS from Foxconn. I'm prevented
from checking it at the moment, though.
Still, even if it is about a bad BIOS, it does
I got it working on one of my two computers by using sysv-rc-conf to add
run level S to the CUPS entry. It didn't work on my main system, though.
While fooling around, I broke my older system (the one where i got CUPS
working) and had to reinstall Karmic. Before any updates are loaded, I
now see C
After two rounds of updates and HW driver installs, still no problem
with CUPS on the old machine despite not being set to run at run level
S. Strange, and why doesn't it work on my main system. Hope I don't need
to reinstall that too.
--
After upgrade to karmic cups server do not start.
https://
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
I also tried downgrading to 0.6.3-10 but it doesn't work either. Is
something happening with this upstart issue? And where's the bug report
that this one's supposed to be a duplicate to?
--
Some essential se
Public bug reported:
Binary package hint: upstart
Running on a freshly installed 32-bit Karmic, I've got the same symptoms
as in bug #497299. After boot, pulseaudio is the only service that runs.
Manually running sudo modprobe vboxdrv will allow me to use my VM's and
sudo service cups start will
I too have the mentioned boot messages.
--
bind mounts cause lots of "init: ureadahead-other main process (1234)
terminated with status 4" messages
https://bugs.launchpad.net/bugs/502837
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
Coming from bug #491956, I can confirm having the same problem. I'm
running a 32-bit Karmic on a Pentium D-based desktop but have the same
on an older P4 system. The longer boot times have been there since
sreadahead was replaced by ureadahead shortly after karmic was released.
Removing the pack fi
*** This bug is a duplicate of bug 555169 ***
https://bugs.launchpad.net/bugs/555169
It seems this bug is a duplicate of bug #555169 so I'm marking it as
such. So far I have good experiences with writing a new xorg.conf from
the NVIDIA X server settings application. I'll wait a little longer
b
I issued bug #590966 but have now marked it as a duplicate of this one.
I've been experiencing a lagging mouse and keybord for some time after
getting to the login screen. This seems to have been solved by writing a
new xorg.conf from the NVIDIA X server settings application and as such,
I'm quite
Migrated to Lucid recently and I now seem to gain up to five seconds
when ureadahead is used compared to when it's reprofiling.
--
Should exclude very large files
https://bugs.launchpad.net/bugs/518204
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
The problem didn't seem to be fixed by Lee's workaround after all.
Anyway, I recently migrated to Lucid and assumed bu the fast boot that
the problem was gone. However, my syslog says:
May 16 19:18:51 Internetdatorn kernel: [ 17.560017] tda1004x: timeout waiting
for DSP ready
May 16 19:18:51 In
Public bug reported:
Binary package hint: gdm
I have a fairly fresh Lucid system installed from scratch over Karmic.
In Lucid, I often experience that the lightning-fast boot presents me
with a login screen as expected but when clicking on a user, using the
arrow keys, or pressing enter, it turns
Doesn't seem to work in my case. Well not every time at least. I'll keep
it for a while and monitor how it works.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ub
I don't use mythtv but I've also been having the timeout issue. Lee's
workaround works for me whereas the fix of Jose Catre-Vandis from
http://ubuntuforums.org/showthread.php?t=1316032&page=3 does not.
--
tda1004x: timeout waiting for DSP ready
https://bugs.launchpad.net/bugs/486264
You received
Finally, somebody stumbled across a solution that worked also for me
(http://ubuntuforums.org/showthread.php?p=8728987&posted=1#post8728987).
The trick was to stop using CONCURRENCY=shell in /etc/init.d/rc and
instead revert to CONCURRENCY=none.
But honestly, CONCURRENCY=shell is a long-running tr
In bug #511387, It's been noted that the use of CONCURRENCY=shell may
also prevent services from starting.
--
upstart not starting init-scripts (event net-device-up IFACE=lo missing)
https://bugs.launchpad.net/bugs/497299
You received this bug notification because you are a member of Ubuntu
Bugs,
Still no way to make it work on my main system but I've discovered that
also vboxdrv does not start upon boot. This is definitely not a CUPS
problem alone so I'm now following bug #500520 in stead plus some
related threads on the Ubuntu fora.
--
After upgrade to karmic cups server do not start.
h
*** This bug is a duplicate of bug 497299 ***
https://bugs.launchpad.net/bugs/497299
I've got the same problem. At least CUPS and vboxdrv fail to start upon
boot. The loopback contents in /etc/network/interfaces weren't the
issue. I'm considering to downgrade upstart but I'm worried about
poss
I also have this problem. CUPS doesn't start on boot. It happened after
one of the more recent updates (I now have CUPS 1.4.1) on both my
desktops running Karmic (fresh installs). No problems until less than a
week ago.
I've searched the web and found this and other threads about people
having sim
This is still a problem after upgrading two computers to 13.10.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919801
Title:
Unity dash file search is extremely slow
To manage notifications about th
I've got the same problem. I don't even have the US keyboard layout
installed and yet, upon each login, the layout is set to US. Manually
setting it back to the correct one (Finnish in my case) works but after
a reboot, it's wrong again. Very annoying indeed.
--
You received this bug notification
At last, a new Ubuntu release seems to have made a difference. With
Xenial, I'm down to a couple of seconds or less populating the Dash
first time on first login. I'm not sure if it's down to the new release
since I already had a startup command to preload selected scopes
according to Bruno Nova's
At last, a new Ubuntu release seems to have made a difference. With
Xenial, I'm down to a couple of seconds or less populating the Dash
first time on first login. I'm not sure if it's down to the new release
since I already had a startup command to preload selected scopes
according to Bruno Nova's
This exact same behaviour has been reported in Bug #919801, which was
origunally filed for Ubuntu 11.10 (sic). It's a bug that affects many
users but never seems to attract enough resouces to get solved. Please
register yourself as affected to help raise focus on this problem.
--
You received thi
Noobs mistake on my account, in other words.
Thanks, Bruno. I've been coping with this bug since 12.04 and your tip
is the first to have made a difference.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bug
Thanks, Bruno.
I tried your earlier proposal from July by making a startup entry like
this:
sh -c "sleep 15s ;/usr/bin/unity-scope-loader
applications/applications.scope applications/"
That didn't seem to make any difference, but now I've been using your
last workaround for about a week and it s
16.04 still using Unity 7?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1061852
Title:
Unity Application Lens slow to load
To manage notifications about this bug go to:
https://bugs.launchpad.net/
I've upgraded to Oneiric since my last post. I used again the tip above
to force Unity to starat, and it worked fine even with nvidia-current.
Looking forward to Precise as Unity is said to be even snappier in that
version.
--
You received this bug notification because you are a member of Ubuntu
I can confirm this fix solves the same problem on a 64-bit system
recently upgraded from Oneiric to Precise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/770158
Title:
Totem fails to play any media
Well, I've still got it in 14.10. There's no doubt that this isn't a
priority. We can probably only put our hope in Unity 8.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919801
Title:
Unity dash fi
Still a problem 14.04. :-(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919801
Title:
Unity dash file search is extremely slow
To manage notifications about this bug go to:
https://bugs.launchpad.
This seems to work for me too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1029289
Title:
Need to authorize my google account each time I boot the computer
To manage notifications about this bug
I tested the tip in this link to force Unity to start:
http://askubuntu.com/questions/37629/geforce-go-7300-7400-blacklisted-
can-i-still-run-unity
It did start but the launcher was a mess. I then deactivated nvidia-96
and activated nvidia-173 in stead, and now I have Unity working with
Compiz ef
I issued bug #877622, which was marked as a duplicate of this one. I've
now worked around the problem by issuing the following command in the
terminal:
sudo chown -R username:username /home/username
This allowed me to log in graphically to my user account for the first
time after I did a clean i
The problem still exists in the newly released Oneiric beta 2.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maverick slow and flaky after first login
To manage notifications about th
Public bug reported:
I made a fresh install over Natty, keeping my home partition untouched.
When booted, I feed my password to lightgdm and the screen goes black
for a few seconds, then goes back to lightdm. I can do Ctrl+Alt+F1 and
login via the shell, but not via the graphical login. Also, I ca
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/877622
Title:
Cannot log on to Oneiric after fresh install
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/light
Right. I might be waiting until the release first.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maverick slow and flaky after first login
To manage notifications about this bug go to
After Christmas, after way too long time, I was just about to follow the
given recommendation and post a new bug on this issue when I realised
that the computer all of a sudden had started to function properly after
one year of problems. Failing to identify any recent updates that I'd
expect to mir
I git this bug too. Tried to figure out problems with an old computer
gone instable and found memtest86+ claiming that all three RAM sticks
were faulty. Then tried some good (I thought) sticks from another
computer with the same result. Then tried all sticks from both computers
in the second comput
Gwibber still doesn't work in Natty but trying out the Oneiric Alpha 3
live CD, Gwibber again updates my Facebook feed. Any chance of seing a
fix coming to Natty? After all, it's a while still until October.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
I tried out Oneiric Alpha 3 and still no change. I'm running Linux Mint
Debian Edition alongside Ubuntu now and while that works perfectly, it
really doesn't feel like home to me. Some action or at least some
feedback would be much appreciated.
--
You received this bug notification because you ar
Would it be better if I reported a new bug about this on Natty or
Oneiric? I guess Maverick bugs aren't really receiving a lot of
attention anymore, or am I wrong?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.
I've had this problem in Precise, in Quantal, and now in Raring, and
I've had it on totally four Ubuntu machines in the household. The rest
of the Dash is also very slowly populated but the Applications lens
loads slower than anything else.
It's been worse in 12.10 than in 12.04 and I had high hop
According to this link
(http://ubuntuforums.org/showthread.php?t=2106949), you could achieve
the same by installing sqlite3 and performing:
cd .local/share/zeitgeist/
sqlite3 activity.sqlite vacuum
I'll be trying that on the worst of my three Ubuntu machines. On this
one, I tried emptying ~/local
According to bug #919801, the problem can be eased by cleaning the
Zeitgeist SQlite database. I'll be trying that on the one of my machines
that is worst off. On the laptop I'm using now, I'm down to a couple of
seconds for the dash to populate the first time after login. Not perfect
but a clear im
Trying the sqlite vacuum command didn't work all that well even though I
think it helped a little. It got even slightly better by deleting
everything in the ~/.local/share/zeitgeist/ directory but still, Dash is
quite slow to polulate the first time after login.
Now, the results of the files lens
Trying the sqlite3 vacuum command on my worst behaving machine didn't
work all that well even though I think it helped a little. It got even
slightly better by deleting everything in the ~/.local/share/zeitgeist/
directory but still, Dash is quite slow to polulate the first time after
login.
Now,
I'm travelling at the moment but will submit the lightdm.log file when I
get back home next weekend. Is the file located somewhere under
/var/log?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/877622
I've had this problem too on using an Asus P7P55D-E LX motherboard with
Realtek RTL8111, a Core i5 processor, and an Nvidia GTX460 graphics
card. After exchanging every single component except the CPU, graphics
card, and memory sticks, ethernet now mostly behaves decently but I
still have the freez
Almost two months with Natty, always keeping it up-to-date, and adding
xorg-edgers fresh X crack PPA. Still no remedy for the problem. Today, I
installed Linux 2.6.39-3 from the kernel PPA but that didn't help
either. What's the status of this bug?
--
You received this bug notification because y
More than a month without a working Gwibber now. All resources going
into the next Ubuntu release already?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757419
Title:
Gwibber doesn't update Facebook
Gwibber says the last feed was updated 64 days ago. Anything happening
with this bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757419
Title:
Gwibber doesn't update Facebook news
To manage noti
This is to confirm that this bug also exists in Oneiric alpha. Please
adress it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maverick slow and flaky after first login
To manage noti
Gwibber hasn't updated my Facebook streams in eighteen days now.
Anything happening with this bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/757419
Title:
Gwibber doesn't update Facebook news
-
Today, I tried running PCLinuxOS 2010.12 from a live CD and discovered
it had the same problem as Ubuntu. Since the PCLOS Live doesn't use
autologon, I could log out without rebooting and log back on. The second
time, things worked as they should whereas the first logon was slow and
flaky just like
Just to add some information, I've now tried to run the live CD of Natty
Alpha 3 on my problem computer. It reverted to standard Gnome in stead
of using Unity, and it was just as flaky as Maverick. Noteworthy, Natty
Alpha 3 Live ran smoothly, with Unity, on my Sony Vaio laptop with AMD
processor an
Another note: After receiving the computer from service last Friday (due
to a networking problem on both Win7 and Ubuntu), several major
components have been exchanged; The MB is now a P7P55-M (no longer
P7P55DE LX), the PSU has also been changed along with the DVD station
and even the tower itself
Public bug reported:
Binary package hint: ubiquity
I'm trying to install Natty Beta amd64 from an ISO image to a VirtualBox
VM. The installation wizard lets me through fine, including the
partitioning, but at the end, I'm presented with a window stating that
the installation program has crashed a
** Attachment added: "Contains syslog and partman plus a screenshot of the
error message (in Swedish)"
https://bugs.launchpad.net/bugs/749535/+attachment/1973774/+files/Attachment.tar.gz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubu
I uchecked the automatic installation of 3rd party software and the
internet update during installation and managed to complete. The system
restart after finish halted, though, so I had to force-quit the VM.
After starting it up again, it seemed to work fine, though, and a normal
update completed w
Tried the recently released Natty beta live CD today. The problems
remain, however. Natty beta has xorg 1:7.6~3ubuntu11 and linux kernel
2.6.38-7.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
I've purged other nvidia stuff, added Cedric's PPA, and installed
nvidia-96 successfully. I've set gl_conf to auto, reconfigured
nvidia-96, and run sudo nvidia-xconfig. As far as I can see,everything
should now be OK but still, I get no 3D effects or Unity support.
Either, I'm doing something wrong
@Alberto: I noticed that blacklisting entry also in the first output i
posted. Is it possible to change or remove the blacklisting? How?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/741930
Title:
[
This is posted from a Live CD session of the just received Oneiric beta.
However, I had to log out and then back in to get control enough to do
this. In other words, the reported bug still exists in Oneiric beta.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
I've disabled Cedric's PPA and purged all nvidia stuff, then reinstalled
nvidia-96 again from natty-proposed making sure to set gl_conf to auto,
reconfigure nvidia-96, and run sudo nvidia-xconfig. Still, I get no
Unity support or 3D effects in neither Classic nor Unity 2D. I've
attached again some
@Alberto: I think your point would be very valid if the hardware that
was very old too. But in Lucid, I got full 3D effects using the
nvidia-173 driver, in Maverick, I had to downgrade to nvidia-96, and in
Natty, there's seems to be no way to get 3D neither in Ubuntu Classic or
Unity. Maybe I'm spo
Public bug reported:
Shortly before Christmas, I bought a brand new gaming computer for dual-
booting Win7 and Ubuntu. After testing the 64-bit Maverick live CD and
finding it flaky, mildly put, I still opted to install it on a dedicated
hard drive as planned. After enabling the proprietary Nvidia
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maverick slow and flaky after first login
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/lis
Tried the Debian 6 Live CD today and no problems there. It uses xorg
v1:7.5+8. Maverick uses v1:7.5+6ubuntu3.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maverick slow and flaky afte
Yesterday, I made a fresh install of Natty and sadly, the stability
issues upon first logon after each boot remain the same. It makes no
difference whether I log on to Unity, Classic, or Classic with no
effects.
HOWEVER, I have now booted into recovery mode and as I write, I have
thirteen (13) win
I got this too. Didn't notice it before install as running from the
Live, it couldn't run unity anyway. I've always had to install
proprietary drivers anyway before having any serious eyecandy so
expected things to work out after doing that. That being said, when
going from Lucid to Natty, I had to
I installed the updated driver from NVIDIA's web pages as it was claimed
to support xorg-server 1.10. However, it seems that the X server still
loads the Noveau routine and I don't know how to prevent that. So no
luck for me. Hope that with time, something is done with the distro-
provided drivers.
Today, I've tried a lot of different live CDs and it seems that one
thing common to the distros that have the problem I've reported here is
that they use xorg version 1:7.5. v1:7.4 or older seem to work well. The
only exception to the rule so far is Debian 6 as mentioned in an earlier
post. But Deb
Redid the installation with 5GB allocated for /. This time, the
installation went fine also with internet update during install time and
with 3rd party software installation enabled. A couple of days and a
couple of normal updates later, things still seem fine, so I guess this
bug can be closed.
-
The computer in question is currently on service for a network problem
but I'll try the file system check once I get it back, probably in the
middle of next week. As far as reinstalling is concerned, I've already
done that once and it unfortunately didn't help.
--
You received this bug notificati
That's great! I'll await any further instructions. Do let me know in
case more information or any actions are needed from my side.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/720863
Title:
Maveric
The Natty beta 2 live CD still has the same problem. I'm going to give
Natty a final shot after its release but I can't say I'm very
optimistic. The rest of the family now refuses to use Ubuntu on this
computer and if the problem continues to receive what appears to be no
attention at all (forgive
I opened Nautilus and right-clicked on an arbitrary folder. Under "Open
with Other Application", I chose Nautilus and made sure the "remember
this..." check was toggled on. Now, folders open with Nautilus as they
should. Let's see how long it lasts...
--
opening a directory using an application c
I thin I've got this too. Opening 'Computer' launches Nautilus but
double-clicking any other folder opens Brasero. This appeared after my
first (intentional) Brasero project since upgrading to Lucid. Simply no
idea what has happened or why. Any help would be appreciated.
--
opening a directory us
I thin I've got this too. Opening 'Computer' launches Nautilus but
double-clicking any other folder opens Brasero. This appeared after my
first (intentional) Brasero project since upgrading to Lucid. Simply no
idea what has happened or why. Any help would be appreciated.
--
opening a directory us
I think I've got this too. Opening 'Computer' launches Nautilus but
double-clicking any other folder opens Brasero. This appeared after my
first (intentional) Brasero project since upgrading to Lucid. Simply no
idea what has happened or why. Any help would be appreciated.
--
opening a directory u
Unfortunately, the problem isn't solved after all. I still have the
occasional (and rather frequent, it feels) keyboard and mouse lag.
Moreover, which might be related, I sometimes don't get to the login
screen at all. I'm just left at the splash screen forever and am forced
to use the power button
I used gdmsetup to change to automatic login, then rebooted, changed
back to multiuser again, and rebooted twice more. I now have the
following warnings in my log files:
gdm-binary[902]: WARNING: Unable to find users: no seat-id found
gdm-simple-greeter[1376]: Gtk-WARNING:
/build/buildd/gtk+2.0-2
Papukaja's tip about using gdmsetup to change to automatic login, then
back to multiuser again helped me get rid of the warning about
/etc/gdm/custom.conf. The following two warnings I've had before are
still around, though:
gdm-binary[902]: WARNING: Unable to find users: no seat-id found
gdm-sim
I've got the following messages in my log files:
gdm-binary[902]: WARNING: Unable to find users: no seat-id found
gdm-simple-greeter[1376]: Gtk-WARNING:
/build/buildd/gtk+2.0-2.20.1/gtk/gtkwidget.c:5636: widget not within a
GtkWindow
gdm-session-worker[1378]: GLib-GObject-CRITICAL: g_value_get_b
Actually, under right-click and "Open with Other Application", it
doesn't say "Nautilus" but rather "File browser" (or whatever it's
called in your system language). After doing this once and clicking
"remember this", my problem is still gone.
--
opening a directory using an application change as
Once you have Nautilus open, e.g. by typing nautilus in a terminal, you
can navigate to and right-click on any of the objects in your Places
menu and choose "other application" etc. This made my folders open with
Nautilus again, whether I do it from the Places menu, using GNOME Do, or
from within N
90 matches
Mail list logo
