Hello Larry,
I upgrade to intrepid and I try, here is the dmesg, wifi led is on but
no wifi is detecting... here is the dmesg,
hp-dmi module is not in Intrepid??
[10632.392560] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[10632.392589] b43-pci-bridge :02:02.0: PCI INT A -> Link[LNK3] -
Larry,
I tried to load windows driver with ndiswrapper, the wifi is working but
button don't. I try showkey and I have nothing.
I believe I recall that this button worked with ubuntu 7.10 (don't
remember if it was with ndiswrapper or bcm43xx), I will download the
livecd and test it, if I can give
sorry don't have lot of time :(
I try hp-dmi with 8.10 alpha5, nothing new...
I've just see that alpha6 is out, is it usefull that I try it?
in 7.10 with bcm43xx, button don't work but wifi is working.
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notifi
hp-dmi is not loading automatically , I need to "modprobe" it
I will try alpha6...
I'm sure hardware is ok, I have a double boot, wifi and button works
well with Windows
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member o
here is the sprom_out
** Attachment added: "sprom_out"
http://launchpadlibrarian.net/15519970/sprom_out
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
same than chongma : load is ok, scan is ok but I can't connect
Presario R3215 : Broadcom Corporation BCM4303 (rev 02)
here is the dmesg modprobe b43legacy and then try to connect :
[ 9770.120955] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor
0x4243)
[ 9770.120965] ssb: Core 1 foun
test with new kernel 2.6.24-19-generic
Presario R3215 : Broadcom Corporation BCM4303 (rev 02) (14e4:4301)
module load ok but no scan, here is the dmesg :
[ 2243.055144] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor
0x4243)
[ 2243.055156] ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00
test with new kernel 2.6.24-19-generic
Presario R3215 : Broadcom Corporation BCM4303 (rev 02) (14e4:4301)
module load ok but no scan, here is the dmesg :
[ 2243.055144] ssb: Core 0 found: IEEE 802.11 (cc 0x812, rev 0x02, vendor
0x4243)
[ 2243.055156] ssb: Core 1 found: PCMCIA (cc 0x80D, rev 0x00
Public bug reported:
Binary package hint: linux-image-2.6.24-19-generic
Ubuntu 8.04
kernel : 2.6.24-19-generic
with earlier kernel, loading b43legacy hard locking the pc ( cf Bug
#192720 )
now load is ok but no scan when do `iwlist scan`
here is the hardware :
Compaq Presario R3215 : Broadcom
** Attachment added: "dmesg when loading b43legacy"
http://launchpadlibrarian.net/15175654/dmesg.txt
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
for issue with module loading but no wifi I create this report : #238896
--
Loading b43legacy freezes computer
https://bugs.launchpad.net/bugs/192720
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bug
Sorry for 1. it's no difference...
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
1. Yes see attachment
2. mini-pci card in a laptop
3. there is a push button, the light is coming on about few seconds
after loading module but. The push button seems not working, nothing in
dmesg. When unload the module the ligth switch off
** Attachment added: "dmesg.txt"
http://launchpadli
rfkill and rfkill_input are not loaded.
if I load them manualy, I can see sometimes the two SSID of my AP, but I can't
connect. the wifi light is about 15/30 secondes on then about 15/30 secondes
off then on, then off, etc...
push button don't seems to work.
--
No wifi with b43legacy
https:/
alpha 5 is always planned for the Thursday Sept 4? I will wait this
release. I will try to test it quicly
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs ma
no alpha 5, trying alpha 4...
kernel is 2.6.26-5
test is nok
here is the messages :
Sep 5 15:59:44 ubuntu klogd: [ 348.954853] b43legacy-phy1: Broadcom 4301 WLAN
found
Sep 5 15:59:44 ubuntu klogd: [ 349.007458] Broadcom 43xx-legacy driver loaded
[ Features: PLRID, Firmware-ID: FW10 ]
Sep
there is nothing when push button (it is not a 2 states button, it is a
push button, don't if it is important...)
lastest test was made with livecd 8.10 alpha4 .
laptop work with 8.04, kernel is 2.6.24-21-generic.
I think I can build new kernel with patch, if possible on the 8.04...
--
No wifi
Larry,
I use 32-bit system
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/list
sorry Larry, I can't load the module, my kernel is 2.6.24-21-generic, your
module seems to be for 2.6.24-19.
I have a "Unknown symbol in module" message. do you want de /var/log/messages?
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because
I can load module with the old kernel 2.6.24-19
The 2.6.24-19 is always installed, so I boot with it and I could load the
module after loading b43, but this not working with 2.6.24-21.
1) I load b43legacy -> error
2) I load b43 -> ok
3) load b43legacy -> ok
4) pushing buton -> nothing
5) sometim
loading module is ok, but always nothing when push the button, I have
one more line in dmesg :
[ 2263.047759] input: b43legacy-phy0 as /devices/virtual/input/input17
I watch into /sys/devices/virtual/input/input7
in uevent I have this :
PRODUCT=19/0/5/0
NAME="Lid Switch"
PHYS="PNP0C0D/button/inp
there is nothing when I push the button (I try others keys/buttons, I
have the codes)
--
No wifi with b43legacy
https://bugs.launchpad.net/bugs/238896
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bu
Hello Larry,
BIOS Reset do nothing...
here is dmesg with try 3, always nothing with showkey, wifi is not ok
[ 403.755735] b43legacy-phy0: Broadcom 4301 WLAN found
[ 403.779626] b43legacy-phy0 debug: Found PHY: Analog 0, Type 1, Revision 4
[ 403.779655] b43legacy-phy0 debug: Found Radio: Manuf
I confirm this bug on a fresh Ubuntu Server 9.10-beta
ex :
r...@ubuntu:~# pear install Crypt_CHAP
downloading Crypt_CHAP-1.0.2.tgz ...
Starting to download Crypt_CHAP-1.0.2.tgz (5,494 bytes)
.done: 5,494 bytes
r...@ubuntu:~#
I try pear upgrade but there is the same problem :
r...@ubuntu:~# p
pear install work with -Z option :
r...@ubuntu:~# pear install -Z Auth_SASL
downloading Auth_SASL-1.0.3.tar ...
Starting to download Auth_SASL-1.0.3.tar (Unknown size)
done: 44,544 bytes
install ok: channel://pear.php.net/Auth_SASL-1.0.3
r...@ubuntu:~#
--
pear install fails without e
Ubuntu 10.10
fglrx 2 : 8.780-0ubuntu2
firefox : 3.6.10+build1+nobinonly-0ubuntu3
thunderbird : 3.1.4+build2+nobinonly-0ubuntu3
ATI Technologies Inc RV730XT [Radeon HD 4670]
affect png and jpeg
WORKAROUND :
change in about:config gfx.color_management.mode from 2 to 0
work for TB and FF
--
Firef
26 matches
Mail list logo
