Ok so I turned on "show paint" and "show fps"
First observation: If I change the screen's refresh rate, I see the
corresponding change in both the fps shown by kwin *and* the
wakeups/second.
Second observation: If I don't touch the mouse and have a static screen,
nothing is apparently getting rep
I am happy to re-confirm this, it happened to me this morning when I was
fighting to get Kubuntu on Intrepid to start up :)
** Changed in: xorg (Ubuntu)
Status: Incomplete => New
--
higher resolutions aren't recognized for external monitors after hotplugging
but after X start (Virtual is
Public bug reported:
Binary package hint: bzr
I tried 1.9rc1 from the bzr-beta-ppa and when pushing a branch to
Launchpad it will stall after 1/4 done and promptly eats RAM like
there's no tomorrow - I killed it when it got to 800 meg.
Downgrading to 1.8-1 works ok.
** Affects: bzr (Ubuntu)
** Also affects: bzr
Importance: Undecided
Status: New
** Changed in: bzr (Ubuntu)
Status: New => Invalid
--
1.9rc1 can't push to Launchpad
https://bugs.launchpad.net/bugs/293679
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
On Tuesday 04 November 2008 22:43:48 Andrew Bennetts wrote:
> You are pushing via bzr+ssh, I assume?
Yep, sorry I should have mentioned that.
> Did you get a backtrace in ~/.bzr.log when you killed it?
Yes:
Using saved push location: lp:~julian-edwards/launchpad/api_copy_pa
BTW, I'll carry on using 1.9rc1-1 and let you know as soon as the problem
happens again, if it does.
--
1.9rc1 can't push to Launchpad
https://bugs.launchpad.net/bugs/293679
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
Just upgraded to 8.10 beta and I can confirm that I am having the same
problem. Whenever I watch anything on Hulu. But I suspect other sites
like You tube might exhibit the same behavior.
--
Npviewer randomly freezes while surfing sites like youtube
https://bugs.launchpad.net/bugs/158126
You rec
is .sometimes it works and sometimes it dont...I
> currently went back to 32 bit. and have had no problems with flash.
>
> On Sun, Oct 19, 2008 at 4:56 PM, Julian Menzie <[EMAIL PROTECTED]>
> wrote:
>
> > Just upgraded to 8.10 beta and I can confirm that I am having the
what if you have a 64 bit system will this work around also apply? I
have been having freezing, crashing, sputtering problem. *sigh*
Hope this gets fixed in the next couple of weeks.
On Mon, 2008-10-20 at 18:42 +, Misic wrote:
> Install Macromedia Flash plugin & Ubuntu restricted extras (Add/
ok...will give your workaround a shot...Thanks
--
julian menzie <[EMAIL PROTECTED]>
On Mon, 2008-10-20 at 19:10 +, Peter wrote:
> yes, but i have 64bit system...
>
--
Npviewer randomly freezes while surfing sites like youtube
https://bugs.launchpad.net/bugs/158126
You recei
Public bug reported:
Binary package hint: kdepim
Kmail bombs on startup with this error:
[EMAIL PROTECTED]:~$ kmail
ASSERT: "s->parsed == false" in file
/build/buildd/kde4libs-4.1.2/kdecore/kernel/kcmdlineargs.cpp, line 524
It was working fine until I updated my packages on Sunday 12th October
Public bug reported:
Binary package hint: kdepim
On current Intrepid with KDE4 I get this:
[EMAIL PROTECTED]:~$ knotes
knotes(16517): Communication problem with "knotes" , it probably crashed.
Error message was: "org.freedesktop.DBus.Error.NoReply" : " "Did not receive a
reply. Possible cause
Something is seriously boogered:
[EMAIL PROTECTED]:~$ ps -fe|grep scim-panel-gtk|wc -l
121
After killing all those instances, knotes and kontact popped up.
--
knotes and kontact fail to start
https://bugs.launchpad.net/bugs/282666
You received this bug notification because you are a member of U
Also happens for me, Dell D630 laptop (64 bit) with Intel GMA 965. I
just upgraded from Kubuntu Hardy to Intrepid so I've no idea if this is
KDE4 related.
It looks like DPMS is kicking in briefly. The laptop's screen stays on
while this happens.
I made it stable by using xrandr to a lower resolu
Public bug reported:
Binary package hint: kdebase
>From powertop:
20.3% ( 83.3) knotify4 : schedule_timeout (process_timeout)
17.6% ( 72.4): [EMAIL PROTECTED]::00:02.0
14.8% ( 60.7) kwin : schedule_timeout (process_timeout)
10.3% ( 42.3) firefo
I don't understand why you've marked this invalid. Is the presence of
desktop effects supposed to excuse the high number of wake-ups? That's
not a valid reason.
Regarding your driver, is it nvidia, configured with on-demand
interrupts? Intel doesn't have that luxury AFAIK.
--
powertop shows k
On Tuesday 14 October 2008 12:44:32 Harald Sitter wrote:
> Ok, let me put it this way. Do you really expect that playing Quake is
> not going to raise the wakeup time? Desktop effects are basically the
> same, just less wakeupish.
If it's sat there doing nothing, I don't expect it to keep re-drawi
Public bug reported:
Binary package hint: gdm
On my uptodate (Thuesday, Oktober 28 ) Ubuntu 8.10 running on an acer
travelmate C110, the keyboard often does not work under X11 after
hibernate. I can switrch to console using + +Fx, but all
other keys like + + are not working. Can restart
gdm from
I can confirm this bug from a clean 8.10 install (without any additional
repositories).
I also had a look into the source code. The assertion occurs in the function
HelperX11::getModifiers. In this function, there is a for loop with a range of
0 to 3 (i=0; i < 4), which iterates over the entries
Sorry for double posting but I should add two other things, that I found out:
First the bug seems to occur with other characters that involve pressing AltGr.
I tested this with "|", which -- on a German keyboard -- is typed as AltGr+<.
As this worked in hardy and the corresponding code did not cha
Well I can't re-create this now either :/
The only difference is that I am using 1.9rc1-1 now as that is what I upgraded
to just now to test this out. However, I know I was not the only one with the
issue yesterday, so it might be some particular data that triggers the bug
rather than all push
These "miraculously" started working some time this week so I can't
directly test this any more.
However, I found another program that won't start, both before and after
removing scim. Here's the paste from my konsole:
$ gvim
/usr/bin/scim
Hit ctrl-c and:
^CICE default IO error handler doing
C8B5BE.9AD7282E
#
There seem to be a few reasons why Exchange would misbehave. Some of
them are:
http://support.microsoft.com/kb/266286/en-us
http://support.microsoft.com/kb/835643/en-us
http://support.microsoft.com/kb/944153/en-us
I hope this helps.
Cheers,
Julian
As requested:
http://www.alsa-
project.org/db/?f=ed4e480a831edbff00627848577a39cc6917c95b
** Changed in: linux (Ubuntu)
Status: Incomplete => New
--
Headset volume control doesn't change headset volume
https://bugs.launchpad.net/bugs/201391
You received this bug notification because you
I had exactly same problem as mentioned here.
--
network-manager After reboot network is totally broken
https://bugs.launchpad.net/bugs/279262
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists
Public bug reported:
Binary package hint: totem
I get this when running totem from a terminal:
[EMAIL PROTECTED]:~$ totem
** (totem:8509): DEBUG: Init of Python module
** (totem:8509): DEBUG: Registering Python plugin instance:
YouTube+TotemPythonPlugin
** (totem:8509): DEBUG: Creating object of
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/16623999/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/16624000/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/16624001/ProcStatus.txt
--
Totem
I just confirmed that the patch is not in hardies kdebase source package
(kdebase_3.5.9-0ubuntu7.3), yet. This is also the case for the 3.5.9 tag
of KDEs SVN. This one is till at revision 774532 and thus does not
include the fix (783764).
I also experienced the bug again in 8.04, but not as often
It also blew away my custom /etc/modprobe.d/lirc-serial.
It's totally unacceptable for a package update to unconditionally re-
write customised configuration.
--
Update disables lircd.conf (i.e. the remote control) without appropriate notice
https://bugs.launchpad.net/bugs/239938
You received th
Hello again Colin
My happiness with "noapic" has waned, because I am now getting hard
lockups requiring a power cycle. It seems to happen when I am using
Skype and waggle my USB mouse around, so I guess it's causing a lot of
interrupts and overwhelming something.
Are we any closer to a *real* fi
Hi Colin - noapic seems to not break suspend/resume so I'm quite happy
again :-)
--
Powertop reports huge number of wakeups and drains battery
https://bugs.launchpad.net/bugs/145377
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubu
Colin, finally I tried booting with noapic. The problem appears to go
away (as with acpi=noirq) and it doesn't freeze the machine with
excessive USB activity (like acpi=noirq).
I'll try suspending and resuming next and see how that goes.
I did another interrupt diff, see attached.
** Attachment
IRQ diff with no boot params and 20k wakeups/sec
** Attachment added: "irq_delta_normal.log"
http://launchpadlibrarian.net/14501723/irq_delta_normal.log
--
Powertop reports huge number of wakeups and drains battery
https://bugs.launchpad.net/bugs/145377
You received this bug notification beca
Sorry for asking this question here, but:
If I used this script to upgrade mesa (which seems to have worked well),
are there any precautions I need to take for regular ubuntu updates? Or
is it safe to install e.g. an update for xserver-xorg-video-intel?
Anything I need to look out for when updatin
I don't know if the BT hardware is the same, but on my Latitude D630 I
just booted up Vista (I kept it in a small partition in case of such
emergencies!) and updated Dell's BT driver - it resets the firmware back
to a version that works in Linux.
--
Bluetooth not discovered on Dell Inspiron 9400
On Monday 05 January 2009 14:04:04 Martin Gräßlin wrote:
> The problem of too many wakeups is solved in KDE 4.2 being released this
> month. KWin will be idle and don't wake up if nothing has to be painted.
> I just did the test and KWin is at about 8 wakeups per second when being
> idle.
Awesome!
** Changed in: soyuz
Assignee: (unassigned) => Celso Providelo (cprov)
--
Please sync cgal 3.3.1-4 (multiverse) from Debian testing (main)
https://bugs.launchpad.net/bugs/238021
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
Public bug reported:
Binary package hint: transmission
Ubuntu 8.10, Transmission 1.41b5 (7459)
More a usability thing, and less a bug, but I don't know where else to
put it... :)
Torrent -> Details -> Trackers
The alt-key combo for the "revert" and "remove" buttons are the same,
Alt-R. When pr
I can verify that this affects me too.
Running Virtualbox-2.1 (actually, 2.1.4), Jaunty Alpha 6.
I mounted the guest additions ISO through the VirtualBox Devices Menu
(instead of clicking Machine -> Install Guest Additions). As a result,
Jaunty would not boot into high-graphics mode.
Currently t
No dice.
--
Jaunty: virtualbox-ose-guest-utils conflicts with xserver-xorg-core
https://bugs.launchpad.net/bugs/313510
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://list
Public bug reported:
Binary package hint: emesene
UI capitalization typo...
When a nudge is sent, the text "you have sent a nudge!" is placed in the
conversation window.
The "y" in "you" should be capitalized.
** Affects: emesene (Ubuntu)
Importance: Undecided
Status: New
--
Ty
** Changed in: soyuz
Importance: Undecided => Low
Status: New => Triaged
** Tags added: feature
--
PPA could have option to auto-add to sources
https://bugs.launchpad.net/bugs/326295
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubun
Public bug reported:
Binary package hint: xmltv
The xmltv version for hardy is too old and the UK grabber is failing
because of the recent listings data format change.
Can the latest version be released to -updates please? I've installed
the current intrepid xmltv instead and it works fine.
**
You need to install iscan, provided here as RPM packages:
http://www.avasys.jp/lx-bin2/linux_e/scan/DL1.do
If you use deb packages, try: sudo alien packagename.rpm, which will
generate a deb for you. Then, install each deb package by issuing: sudo
dpkg -i packagename.deb
Once you are done, launch
My Intrepid install also selects the wrong drive to install.
In addition, Brother doesn't include a 64-bit version of their driver,
so I'm SOL and must use the HL-2060 driver.
--
Brother HL-2140 printer not working in Intrepid Ibex by default
https://bugs.launchpad.net/bugs/287889
You received t
Public bug reported:
Binary package hint: emesene
Description:Ubuntu 8.10
Release:8.10
Linux julian 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64
GNU/Linux
emesene:
Installed: 1.0.1-1
Candidate: 1.0.1-1
Version table:
*** 1.0.1-1 0
500 http
Public bug reported:
Binary package hint: python-fuse
The xmp.py example filesystem included in the python-fuse - and thus probably
many, if not all, filesystems derived from that one and directly accessing an
underlying filesystem tree - has some issues with reading somewhat large files.
By l
** Description changed:
Binary package hint: firefox-3.0
- firefox-3.0 and xulrunner-1.9 need a crash sink bug. This one serves
- this purpose.
+ firefox-3.0 and xulrunner-1.9 need a crash sink bug. This one serves this
purpose.
+ http://emkt.ceviu.com.br/click.php?12297-104628-365-25445
--
If anyone is still having problems with ie4linux, what worked for me
using Intrepid, was a hint earlier in the thread, on the executable, ie
edit this file
/.ies4linux/bin/ie6
remove anything with '| debug', and also the authors website address (just put
in a fast loading one of your own'.
IE
Public bug reported:
thunderbird hangs sending message > ~1k every time. The size of the
message is critical one less character and the message is sent
correctly. (Balsa also hangs in same way)
However if I reduce the MTU from 1500 to 1496 (ifconfig eth0 mtu 1496)
then the message is sent immed
I should add that the laptop is dual boot Ubuntu/XP. I can send small
and large messges from Thunderbird on XP using Thunderbird profile
shared between Ubuntu & XP and using the same network card, router,
cabling etc. Julian
--
thunderbird & balsa hang sending >1k-byte message
I tested on another network (university of York UK). There I can send
large messages from Thunderbird under Ubuntu-8.10.
--
thunderbird & balsa hang sending >1k-byte message unless MTU reduced from 1500
to 1496
https://bugs.launchpad.net/bugs/347636
You received this bug notification because
Also having problems with an A100, might be due to the fact that i boot
from usb hdd.
--
[TOSHIBA Satellite A200] suspend/resume failure
https://bugs.launchpad.net/bugs/343318
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bu
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24361235/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/24361236/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/24361237/ProcStatus.txt
--
Gnome-
Public bug reported:
During install i chose US Keyboard layout as system default.
When i now use the gnome-keyboard-properties dialog to change my keyboard
layout to German it works fine until after reboot. Dialog still shows the
German layout as active, but the original US keyboard layout is us
Here to report that Stefan Glasenhardt's workaround works perfectly.
I added the line:
Option "Legacy3d" "false"
to xorg.conf, which enabled hardware acceleration, allowing me to get to
the desktop WITH compiz. Perfect!
I've attached the requested outputs.
** Attachment added: "Output of "lspci
** Attachment added: "My xorg.conf... commented out sections were a fix which,
while working, wouldn't allow compiz to run. Remaining output fixes issue to my
satisfaction!"
http://launchpadlibrarian.net/24437003/xorg.conf
--
[i845G] Fatal server error: Couldn't bind memory for BO front buf
Glad to report that this problem has been fixed by the latest batch of
updates.
Great work everyone!
--
Many python programs fail with: "undefined symbol: PyUnicodeUCS4_DecodeUTF8"
https://bugs.launchpad.net/bugs/349467
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Machine suspended properly in Intrepid, but once upgraded to Jaunty, is
hit and miss...
ProblemType: KernelOops
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/shar
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/24452735/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/24452736/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24452737/Dependencies.txt
** A
** Attachment added: "CoreDump.gz"
http://launchpadlibrarian.net/24452867/CoreDump.gz
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24452868/Dependencies.txt
** Attachment added: "Disassembly.txt"
http://launchpadlibrarian.net/24452869/Disassembly.txt
** Attachm
Public bug reported:
Binary package hint: emesene
Upon upgrade to 9.04 beta, emesene alert boxes (such as the error box
when you are kicked off the service) spawn with the text highlighted.
Currently using emesene 1.4.8 (emesene-crazy).
Please advise as to what logs you'd like me to upload.
**
Chris - My bad, I didn't realize that that was how notify-osd alerts
worked.
If that's the case, then there's no way we can have messages appearing
under notify-osd, unless the fallback alerts are beautified
significantly, since at current, they're quite uninspiring...
Either that, or use notify-
Thank you Bryce, et al.! Today's released fix worked perfectly. I can
finally empty my xorg.conf file :)
--
[i845G] Fatal server error: Couldn't bind memory for BO front buffer (Jaunty)
https://bugs.launchpad.net/bugs/304871
You received this bug notification because you are a member of Ubuntu
Bu
*** This bug is a duplicate of bug 188764 ***
https://bugs.launchpad.net/bugs/188764
** This bug has been marked a duplicate of bug 188764
probe screen resolution at boot
--
Splash screen is stretched on widescreen monitors
https://bugs.launchpad.net/bugs/353916
You received this bug noti
The splash screen is stretched on my monitor (1280x800)... usplash.conf
values are correctly set, but the splash image is still skewed... is
this a symptom of this problem?
--
probe screen resolution at boot
https://bugs.launchpad.net/bugs/188764
You received this bug notification because you are
This crash occurred again last night.
I believe it was due to the computer trying to suspend/hibernate when
becoming dangerously close to running out of battery.
Computer did not successfully hibernate, and soon halted completely when
the battery ran out.
--
[i855 i915] Xorg crashed with SIGSEG
** Changed in: pango1.0 (Ubuntu)
Status: Triaged => Fix Committed
--
gnome-panel crashed with SIGSEGV in g_cclosure_marshal_VOID__BOXED()
https://bugs.launchpad.net/bugs/280484
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ub
The program in question for me is Sibelius, which also has a delay.
Perhaps you can play around with optional switches when restarting
timidity... for example, the manpage for timidity says that the switch
"F" can introduce a delay. This may or may not solve the problem.
--
Timidity daemon doesn
Seems this problem was fixed in a recently updated package, or it was an
isolated incident. hm.
** Changed in: hal (Ubuntu)
Status: New => Invalid
--
SD Card hard locks system
https://bugs.launchpad.net/bugs/356759
You received this bug notification because you are a member of Ubuntu
Bugs
Public bug reported:
Binary package hint: xorg
I don't know the exact package name, so please apply this to the proper
xserver-xorg package, sorry!
Upgrade from 8.10 to 9.04 beta, 82801G onboard sound card is not
detected, and defaults to the null audio driver.
00:1b.0 Audio device [0403]: Inte
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/25095822/Dependencies.txt
** Attachment added: "LsHal.txt"
http://launchpadlibrarian.net/25095823/LsHal.txt
** Attachment added: "LsMod.txt"
http://launchpadlibrarian.net/25095824/LsMod.txt
** Attachment added: "LsPc
Isolated incident after updating. Problem surfaced after updating nvidia
nonfree drivers, and running "startx". Restart solved problem.
Invalidated.
** Changed in: xorg (Ubuntu)
Status: New => Invalid
--
[Intel 82801G] Not detected by new kernel
https://bugs.launchpad.net/bugs/358212
You
Public bug reported:
After upgrading to Ubuntu Jaunty, vnc4server no longer updates the
screen properly for connected clients. Oddly enough, watching VLC videos
in full screen updates properly, but other than that, the screen is
static.
Clients can still interact with the host computer, but they
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/25129585/Dependencies.txt
--
vnc4server no longer updates screen except for XVideo fullscreen
https://bugs.launchpad.net/bugs/358586
You received this bug notification because you are a member of Ubuntu
Bugs, which is subsc
** Attachment added: "lspci"
http://launchpadlibrarian.net/25129610/lspci
--
vnc4server no longer updates screen except for XVideo fullscreen
https://bugs.launchpad.net/bugs/358586
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Turns out I don't have vnc4server installed. Package in question is
actually vino.
** Also affects: vino (Ubuntu)
Importance: Undecided
Status: New
** Changed in: vnc4 (Ubuntu)
Status: New => Invalid
** Summary changed:
- vnc4server no longer updates screen except for XVideo fu
On Wednesday 15 April 2009 10:05:42 Jithin Emmanuel wrote:
> I upgraded back to mesa 7.4 and also added
> Option "AccelMethod" "EXA"
> Option "MigrationHeuristic" "greedy"
> So far I am not having any freezes, but now my opera has a blank icon in
> system tray. Which will be taken o
This is happening for me with latest Jaunty as of 15-April. I *think*
it only happens with qt3 apps as well; at least it doesn't happen with
qt4 and GTK apps.
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Invalid => Confirmed
--
[GM965] Icons on KDE plasma panel are garbled
ht
Please note that a workaround has been detailed under the following two links.
They both contain the same information:
http://www.ltyer.com/wordpress/tutorial-xorg-metamodes-running-fullscreen-games-on-1-monitor-in-a-dual-display
http://www.kareeser.com/ubuntu/metamodes.php
The problem is due to
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/25511001/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/25511002/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/25511003/ProcStatus.txt
** Visibil
** Summary changed:
- [Dell Inc. Inspiron 700m] suspend/resume failure
+ [Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
--
[Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
https://bugs.launchpad.net/bugs/350332
You received this bug notification becaus
I encountered this issue when running Ubuntu Netbook Remix 9.04 Beta
install.
There is no progress indication that the resize of the NTFS partition is
in progress. The graffic just hangs at 0%. I had to fire up a terminal
to see that the ntfsresize process was running... I'm thinking this
could po
*** This bug is a duplicate of bug 14100 ***
https://bugs.launchpad.net/bugs/14100
** This bug has been marked a duplicate of bug 14100
partman doesn't provide ntfsresize status details
--
No feed back while resizing ntfs partition
https://bugs.launchpad.net/bugs/93438
You received this b
*** This bug is a duplicate of bug 14100 ***
https://bugs.launchpad.net/bugs/14100
** This bug has been marked a duplicate of bug 14100
partman doesn't provide ntfsresize status details
--
Ubuntu Server 7.10 - rezise ntfs 0% no visualisation loading
https://bugs.launchpad.net/bugs/192704
By the by... apport also gave me two options... to send a "complete"
report, or a "reduced" report... except the file size was larger on the
reduced report. Odd.
That one might be an apport bug though ;)
** Visibility changed to: Public
--
syndaemon crashed with SIGSEGV in XQueryExtension()
htt
** Attachment added: "cat /etc/initramfs-tools/conf.d/resume"
http://launchpadlibrarian.net/24839042/confdresume
--
[Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
https://bugs.launchpad.net/bugs/350332
You received this bug notification because you are a member of Ubunt
** Attachment added: "dmesg > /tmp/dmesg-core-platform.txt"
http://launchpadlibrarian.net/24839084/dmesg-core-platform.txt
--
[Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
https://bugs.launchpad.net/bugs/350332
You received this bug notification because you are a membe
The following code outputs an empty file:
# echo devices > /sys/power/pm_test
# echo platform > /sys/power/disk
# echo disk > /sys/power/state
# dmesg > /tmp/dmesg-devices-platform.txt
"# dmesg > /tmp/dmesg-core-reboot.txt" attached.
** Attachment added: "dmesg > /tmp/dmesg-core-reboot.txt"
h
** Attachment added: "dmesg"
http://launchpadlibrarian.net/24839062/dmesg
--
[Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
https://bugs.launchpad.net/bugs/350332
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: "lsmod > lsmod.output.txt"
http://launchpadlibrarian.net/24839070/lsmod.output.txt
--
[Dell Inc. Inspiron 700m] suspend/resume and hibernate/resume failure
https://bugs.launchpad.net/bugs/350332
You received this bug notification because you are a member of Ubuntu
Bugs, w
5. Logs attached
6. Both pm-hibernate and pm-suspend do nothing. No text is output to
stdout. The commands were run as root, as per described in
https://wiki.ubuntu.com/DebuggingKernelSuspendHibernateResume
** Attachment added: "cat /proc/cmdline"
http://launchpadlibrarian.net/24839023/cmdline
** Attachment added: "Digital photo of the artifacts"
http://launchpadlibrarian.net/24840235/DSC00107.JPG
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24840236/Dependencies.txt
** Attachment added: "LsHal.txt"
http://launchpadlibrarian.net/24840238/LsHal.txt
**
Public bug reported:
Binary package hint: xserver-xorg-video-intel
When outputting to VGA (which happens to be a TV), trying to output at
1360x768 (the preferred and maximum resolution supported by the TV),
graphical tearing and artifacts are seen on both connected outputs (LVDS
and VGA - See att
Update: Output works correctly when DRI is set to false... but this
stops compiz from starting, which isn't exactly a decent workaround.
Advise?
--
[Intel 82852/855GB] xrandr does not output correctly to VGA at 1360x768
https://bugs.launchpad.net/bugs/355761
You received this bug notification be
** Summary changed:
- xrandr does not output correctly to VGA at 1360x768
+ [Intel 82852/855GB] xrandr does not output correctly to VGA at 1360x768
** Summary changed:
- [Intel 82852/855GB] xrandr does not output correctly to VGA at 1360x768
+ [Intel 82852/855GM] xrandr does not output correctly
Public bug reported:
As far as I know, this is different from my other bug (#350332), since
this is a resume failure, and not a suspend or hibernation failure.
Please advise me as to what logs you'd like to see!
ProblemType: KernelOops
Annotation: This occured during a previous suspend and preve
** Attachment added: "BootDmesg.txt"
http://launchpadlibrarian.net/24917734/BootDmesg.txt
** Attachment added: "CurrentDmesg.txt"
http://launchpadlibrarian.net/24917735/CurrentDmesg.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/24917736/Dependencies.txt
** A
To follow up on unggnu's original comment:
After experiencing a broken suspend (computer goes back to login screen
instead), the commands pm-suspend and pm-hibernate no longer output anything.
The computer does not go to bed.
--
[i855 i915] Xorg crashed with SIGSEGV in drm_intel_bo_unpin()
http
Public bug reported:
Binary package hint: hal
When SD card is inserted, system hard locks. The system actually detects
the SD card, and can read the data, except the card disappears soon
after and the system locks up.
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
Package: hal 0.
201 - 300 of 7106 matches
Mail list logo
