I trouble with a fresh Gutsy install on my Toshiba a200 (with intel's
IHC8 family soundcard).
my speakers worked but my headphone jack wasn't being detected or
showing up in the alsa mixer, nor was it working. Speakers didn't mute
when I plugged my phones in.
But this fixes a lot of problems with
I don't know if anyone's listening, but my Edgy still detects none of my
SATA drives hooked up to the ICH8 controller. It is the ICH8, not
ICH8R.
Specs:
Gigabyte GA-965P-DS3 rev 2.0 BIOS F7 (Intel P965 Express, ICH8)
Intel Core 2 Duo E6300 (1.86 GHz)
00:1f.2 IDE interface: Intel Corporation SATA
Hmm...
I changed the I/O settings at BIOS from IDE to RAID. The problem with
various "Cannot allocate resource region {1} of device " solved, but
Edgy still crashes at startup, and on the screen it says: "PCI: JMB36x:
Enabling dual function on :02:00.0" and then nothing.
I waited for about 5
There are, as far as I know some bugs in grub concerning jmicron, but I
havent had any errors of that kind so far
2006/10/27, erani <[EMAIL PROTECTED]>:
>
> Hmm...
>
> I changed the I/O settings at BIOS from IDE to RAID. The problem with
> various "Cannot allocate resource region {1} of device " so
For me to, just had to set the controllers to raid in bios
2006/10/25, Stefan Steinheimer <[EMAIL PROTECTED]>:
>
> The Edgy Live-CD works very well for me. JMicron, ICH8, and the network
> chip are recognized and work fine (Asus P5B, IDE-mode, haven't tried
> AHCI). I don't know about the alternat
The Edgy Live-CD works very well for me. JMicron, ICH8, and the network
chip are recognized and work fine (Asus P5B, IDE-mode, haven't tried
AHCI). I don't know about the alternate CD. If it doesn't work, the
installer is probably still using an old kernel build.
--
ICH8 doesn't work
https://laun
Do we have a conclusive answer as to whether this is fixed or not? The
status is marked as Fix Released, but both of the last two comments shed
some doubt on this. Confirmations either way anyone?
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@list
I just tried the 2006-10-12 daily alternate CD image.
Asus P5B Deluxe WiFi-AP w/addons:
Promise PATA PCI
Sil SATA PCIE4x
Hard Drives at ICH8-SATA1, ICH8-SATA4, Sil-SATA1 and Sil-SATA2
DVD-Rs at Promise-Primary, Master and Slave
No joy. The JMicron is recognized, the ICH8 is not.
Since I have p
Is anyone able to confirm whether this worked with today's daily? I'm
hoping to get a command line install on my P5B with software RAID
somehow - presumably i can install desktop and strip out all the rubbish
if I have to (if the alternate cd is not working yet)
Cheers,
ph8
--
ICH8 doesn't work
I've just tried the daily build (AMD64 alternate CD) with the same
motherboard and for me it's still not working : neither are the network
interface nor the SATA HDDs recognised.
so I'm still stick with windows on this machine.
Does the alternate CD take a little longer to be up-to-date ?
--
IC
** Changed in: linux-source-2.6.17 (Ubuntu)
Status: Fix Committed => Fix Released
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The live desktop daily for the 11th came out a little later than usual -
but works for me on my P5B. At last I have Edgy installed! :) Thanks to
all!
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/l
Since apt-get upgrading from an older version of Edgy a couple of days
ago, my SATA/JMicron, SATA/ICH8 and PATA/IDE drives are now all
recognised. This is a Gigabyte GA_965P_DS3 motherboard.
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubun
I've tried the daily alternate CD for today (11th October) and my drive
attached to the ICH8 wasn't recognised. I'm guessing the fix hasn't made
it into the installer's kernel. I would try the live CD (I usually have
better luck with it (touch wood ;) as I think it has more up to date
packages) but
2.6.17-10.30 has been released, wonder if it will work?
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
tryed it with the 10/10 daily build, 2.6.17-10.29, couldn't get it
working, would not recognize the sata hard drive hooked up to the ICH8
controller, tryed it in both IDE and AHCI. I'm also getting the grub
error 21 when i try to use the Jmicron controller. but i can get it
installed with it hooked
This fix is now released, no?
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I dont know how much it takes a kernel to become available in a daily
but there is the new kernel 2.6.17-10.29 in todays releases so it should
work now.
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailma
Just curios. I get 4 of this errors:
Cannot allocate resource region {1} of device :03:00.0
Cannot allocate resource region {2} of device :03:00.0
Cannot allocate resource region {3} of device :03:00.0
Cannot allocate resource region {4} of device :03:00.0
(also described in bug #
hey hey hey !!!
this morning, after update & dist-upgrade => new kernel released
and ICH8 working now ;-)
Have a nice day
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Na Pon, 2006-10-09 u 20:48 +, SFAOK je napisao:
> Yep, the changelog references this bug so fingers crossed for tomorrow's
> build :)
When new kernel is released, it's released as a source. That source
needs to build on all Ubuntu's buildd machines (every arch has couple of
machines; source n
Yep, the changelog references this bug so fingers crossed for tomorrow's
build :)
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
As I can see we have a new kernel 2.6.17-10.29 published today at
14:03:20 so its highly possible in tomorrows builds to have a working
ich8.
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/
My understanding is that the fix has been uploaded but has not been
released yet. Once it's released it should make it into the next days
daily build. I'm not sure what happens between the fix being comitted
and being released - I'm guessing there's some sort of code review that
takes place before
I have the same problems with ds3 and sata hdd. I tried the 10-07 daily
image (kubuntu 64) and there is the same problem. Two days passed and I
still dont know if the fix is included in any daily release. My question
is how can I understand what bugs are fixed in a daily?
--
ICH8 doesn't work
ht
[EDIT] : ICH8 doesnt work yet ! but i beileve it will ... soon , so i just
wanted to thanks ben for the work he did !
Sorry for the ones that thought i was able to make it work (Marc , Thomas Hotz)
...
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bu
Good job !
Thanks for all !!
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
good job ben !
i see my sata hdd... so good !!!
if i burn daily live cd tomorrow.. fix is included ?
thank u
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
gok, Joel, thanks for the offers of machine usage.
Gok, I used your system (sure you saw all the reboots). It now has
working ich8.
Fix is commited, and is being uploaded now.
** Changed in: linux-source-2.6.17 (Ubuntu)
Status: Confirmed => Fix Committed
--
ICH8 doesn't work
https://lau
Ben,
I sent you an email to your preferred address regarding access to a
machine for testing. Please respond to that email if you will be making
use of it.
Thanks,
Joel Ebel
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
ben,
to login : ssh -p666 -l root tout.nu
i add your ssh-dss keys ;-)
let me know if you have problem
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Ben,
my config :
pci ide controller silicon image : cdrom + ubuntu hdd (boot)
jmicron : no devices
ich8r : 2 hdd sata with mdadm raid 1
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubu
hi ben,
P5B deluxe (jmicron + ich8r)
send me an email with your ip , i reply with host/login/password
[EMAIL PROTECTED]
see u
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Hi Ben,
I believe I have the target system, but I may not be sophisticated
enough to get Edgy installed on it. I also won't be home until tommorow
night. If no better candidates come forward perhaps you could talk me
through getting Edgy installed? I don't know how to set up SSH for you
either
On Thu, 2006-10-05 at 08:45 +, banxian wrote:
> lucky I have my main IDE HDD connect though a Promise tx2plus,
> so I have successed boot into system after an dist-upgrade from Dapper to
> daily Oct-04.
>
> In Edgy my extra HDDs ([EMAIL PROTECTED]) disappeared, and my recorders
> ([EMAIL PRO
I also think it would be nice to be fixed for edgy. I'm in a corporate
environment and not allowed to open the pc case :(. So now I'm stuck
with Windows.
If its not solved in edgy, I'll have to open the case. Ubuntu worths the
risk ;)
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ub
lucky I have my main IDE HDD connect though a Promise tx2plus,
so I have successed boot into system after an dist-upgrade from Dapper to daily
Oct-04.
In Edgy my extra HDDs ([EMAIL PROTECTED]) disappeared, and my recorders ([EMAIL
PROTECTED]) recognized by kernel.
in Dapper the HDDs working fine
** Changed in: linux-source-2.6.17 (Ubuntu)
Importance: Undecided => High
Assignee: (unassigned) => Ben Collins
Status: Unconfirmed => Confirmed
Target: None => ubuntu-6.10
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.
I really hope this will be fixed. This a regression from Dapper, and it will
concern more people in near future since ICH8 will continue to gain in
adoption. Personaly i'm ok with using Dapper's kernel in Edgy, but doing this
my Jmicron doesn't work, and I must install manually Nvidia's drivers
The kernel freezes for edgy release tommorrow (the 5. of october). Is
there any chance that this bug will be fixed before that ?
Andreas
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubu
I confirm the bug !
ICH8 works with ubuntu 6.06 and does not with the beta of the edgy
MB : P5B
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
not a joke unfortunatly
same issue here with p5b
bug filled here:
https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.17/+bug/62963
but it was mentionned as a duplicate of this one:
https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.17/+bug/57502
since xxx15 kernel recognise
not a joke unfortunatly
same issue here with p5b
bug filled here:
https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.17/+bug/62963
but it was mentionned as a duplicate of this one:
https://launchpad.net/distros/ubuntu/+source/linux-source-2.6.17/+bug/57502
since xxx15 kernel recognise
Same for me
Asus P5B Deluxe
Dapper => ich8r ok / Jmicron nok
Edgy => ich8r nok / Jmicron ok
It's a joke ? :p
Good luck :-)
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
same hardware here. MSI NEO, conected to the 3rd SATA port, not the jmicron one.
But it gives me a diferent error. It crashes when doing something about dual
function at boot.
--
ICH8 doesn't work
https://launchpad.net/bugs/63516
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:
I confirm this. SATA devices are not recognized with ICH8 in Edgy. It works in
Dapper.
I can install Dapper, everything works fine. And then I upgrade to Edgy, but
Edgy won't finish booting with 2.6.17-10 kernels. It stops to "booting: Waiting
for root filesystem", and then after approx. 4 minut
46 matches
Mail list logo
