You don't have to compile the driver to get it work with the current
Lucid kernel (2.6.32-24). You just need the configuration file
(RT2860STA.dat).
1. Download the driver for "RT2860PCI/mPCI/CB/PCIe(RT2760/RT2790/RT2860/RT2890"
from the page http://www.ralinktech.com/support.php?s=2
2. Extract t
This problem STILL exists in Lucid.
I found a forum post somewhere that has similar information to
Sisternicky's post here. Here is what I did.
I followed the directions from Sisternicky - this WILL NOT WORK if you
don't edit the values to "HAS_WPA_SUPPLICANT=y" and
"HAS_NATIVE_WPA_SUPPLICANT_SUP
I'm using Ubuntu 10.04 on EEEPC 901 (Ralink rt2860). I had this bug too.
With the new release, I also had the bug #496093
(https://bugs.launchpad.net/ubuntu/+source/linux/+bug/496093) : no connection
to WPA/WPA2 mixed mode wifi.
I followed the instructions in the post #190 of the previous bug, in
Hi everybody,
I had the same problem as I have an ASUS PCE-N13, 300Mbps, PCIe x1 wireless
card with the same chipset RA2860STA.
I've tried to compile from the source version 2.3.0.0 but had no luck with
that. My kernel is 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 08:03:28 UTC
2010 x86_64 GNU/
If this does not work for someone, try this along with Ledif's solution:
Add these lines to /etc/modprobe.d/blacklist.conf:
#the driver for the wirelss adapter
blacklist rt2800usb
blacklist rt2x00usb
blacklist rt2x00lib
then execute the following commands:
sudo rmmod rt2800usb rt2x00usb rt2x00l
can someone point me in a direction on how to fix this permanently? at
least the issue with the wireless mode so i don't have to type the
commands every time i install a new version?
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notificatio
rbmorse did you try iwpriv ra0 set WirelessMode=9
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
+1 on Lucid. The Ralink driver worked great through either Alpha 3 or
Alpha 4, but since the Beta was released I have not been able to
implement a secure connection to my AP. I can see my AP and others, but
I can't get it to negotiate an WPA2 connection.
--
rt2860 doesn't connect on 802.11n wif
Additional: Kernel is 2.6.32-16-generic on amd64
Network card is edimax pci: Network controller: RaLink RT2800 802.11n
PCI
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
This bug also affects me on Lucid (apt-upgraded on the 28th March 2010)
The source on ralink's site is pretty ugly, but has worked as a work
around for some time.
This is a fairly popular driver, and although people might not *need*
802.11n, I believe it's more important what with all the HD vide
sorry not Karmic, Lucid
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/m
once you place the script run update-rc.d script_name defaults to ensure
that it's loaded at startup
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ub
by the way it's wlan0 in Karmic
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
this is a workaround, how would we eliminate the need for a workaround?
Thanks a lot for the workaround though, help quite a bit. Install new
versions almost daily have the script on the flash drive now.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You receive
Create a executable file with the following, put it in /etc/init.d
#!/bin/sh
# Activate 802.11n
case "$1" in
'start')
iwpriv ra0 set WirelessMode=9
iwpriv ra0 set HtBw=1
;;
'stop')
;;
*)
echo "Usage: $0 { start | stop }"
;;
esac
exit 0
--
rt2860 d
WirelessMode=9
WirelessMode=5 definitely fix the problem.
Which config file controls this?
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
where is this initial configuration located? might as well fix it if it
works.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Use Webmin to create a bootup action containing the two commands, leave
out 'sudo'.
Regards
Ledif
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
Same problem here (eeepc 901). Workaraound works:
sudo iwpriv ra0 set WirelessMode=9 #(WirelessMode=5 aswell)
sudo iwpriv ra0 set HtBw=1
And reconnect manually afterwards via network-manager.
I dont see the point in installing the driver manually, if its just an
configuration issue. I think ubun
Vasya where you from? you might need to adjust you country settings if
you are in Russia to match.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubunt
Vorst case, ralink native driver seems to work as well, however, it
spams the logs quite a bit.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
yes i did, and not once, this also happens to be the case in other distros like
fedora and Mandriva.
you usually have to restart the interface as well. that helped me every time so
far without fail. however, it does not guarantee that it will work for you. i
just want that file to be included
krutoileshii:
Did you try it yourself? In Ubuntu 9.04 with built-in r2860 driver, this file
is processed but it doesn't have any effect.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, wh
you shouldn't have to do that for those setting if you have the
RT2860STA.dat file in /etc/Wireless/RT2860STA/ folder.
the only thing you would have to do is restart your interface.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notificatio
Sisternicky, you offer to compile and replace a built in driver, thats
not what I asked for.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
] Im Auftrag von Vasya
Pupkin
Gesendet: Mittwoch, 30. Dezember 2009 21:48
An: teise...@web.de
Betreff: [Bug 442178] Re: rt2860 doesn't connect on 802.11n wifi
I did a lot of google searching and finally found a solution on how to
enable 802.11n on rt2860sta shipped with Ubuntu 9.04. If you ex
I did a lot of google searching and finally found a solution on how to
enable 802.11n on rt2860sta shipped with Ubuntu 9.04. If you execute
following commands after wireless connection is established
sudo iwpriv ra0 set WirelessMode=9
sudo iwpriv ra0 set HtBw=1
it will reconnect using 802.11n pro
Nicolas Joyard : Sisternicky was talking about a patch to compile last
Ralink kernel. The one included in the the kernel is the 1.8.0 and the
last one is the 2.2.0. Maybe it corrects tons of things...but we can't
try it since it doesn't compile on 2.6.31 kernel.
I'll try to compile it with your pa
Sisternicky, thanks for your help, but the problem is not that we cannot
use the driver. It works very well with 802.11b/g networks. The problem
reported in this bug is that it doesn't handle 802.11N networks.
** Summary changed:
- rt2860 doesn't connect on 802.11n wifi / NetworkManager does not
There is a patch for the driver to compile on 2.6.31 Kernels... It even works
(Interface shows up in iwlist and ifconfig...).
The Problem is: Network-Manager does not accept the driver (It does not even
see a wireless device any more)! But the driver itself works with the patch if
you bypass net
Any word on a fix? I lost 'n' connectivity installing the beta on a eee
and an msi lappy, both with rt2860 cards (2.6.31-12-generic).
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which
Ok thanks.
It seems that there are some progresses in the 2.6.32RC1 :
http://www.kroah.com/log/linux/staging-status-09-2009.html
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=history;f=drivers/staging/rt2860;h=082e4920ac18619cf347ecc76f86f691845c0767;hb=8a0382f6fceaf0c6479e58
Nicolas, this build problem is known. Ralink drivers are written for old
versions of the kernel; the Ubuntu version is patched to allow building
with newer kernels.
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are
I try to compile the last ralink driver from their web page but it
doesn't work. Compilation exits with these errors :
/rt_linux.c:1691: error: ‘struct net_device’ has no member named
‘hard_start_xmit’
/home/ubuntu/Desktop/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:169
Confirmed on Karmic.
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
rt2860 doesn't connect on 802.11n wifi
https://bugs.launchpad.net/bugs/442178
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
** Description changed:
I'm trying the beta version of 9.10 on my eeepc901 (this model uses the
Ralink rt2860 controler)
I'm unable to connect my 802.11n network.
If I configure my routeur on N mode only, I can't connect at all.
But if I configure it on N+G, I can connect in G m
** Description changed:
I'm trying the beta version of 9.10 on my eeepc901 (this model uses the
Ralink rt2860 controler)
I'm unable to connect my 802.11n network.
If I configure my routeur on N mode only, I can't connect at all.
But if I configure it on N+G, I can connect in G m
37 matches
Mail list logo
