Public bug reported:
I believe this is the same as bug 1386465, but I'm opening a new one to
collect apport info.
I upgraded from 14.04 to 16.04 and can no longer start libvirtd. The
output of journalctl -xe shows:
Nov 30 19:08:10 kat-Dell-System-XPS-L322X sudo[5547]: PAM unable to
dlopen(pam_
*** This bug is a duplicate of bug 1409190 ***
https://bugs.launchpad.net/bugs/1409190
And now that I can see the build log, I can see that this is a dupe too.
:)
** This bug has been marked a duplicate of bug 1409190
nvidia kernel module failed to build [error: ‘struct file’ has no member
*** This bug is a duplicate of bug 1409190 ***
https://bugs.launchpad.net/bugs/1409190
Public bug reported:
I was trying to upgrade from nvidia-304 to nvidia-331-updates on Trusty.
Along the way I hit various build failures. Initially I tried to install
it for the Vivid HWE kernel, but then I
Public bug reported:
In Precise, it was possible in the System Settings program to separately
configure switchable keyboard layouts (e.g., QWERTY, Dvorak) and
switchable input methods (e.g., Anthy). That made it possible to use the
Anthy input method with a Dvorak keyboard layout and switch betwee
*** This bug is a duplicate of bug 1333008 ***
https://bugs.launchpad.net/bugs/1333008
Sounds good to me.
** This bug has been marked a duplicate of bug 1333008
Trying to install Wine 1.6 or PlayOnLinux or Q4wine, window pops saying it
must remove Nvidia 304.117 or nvidia-libopencl1-304.
I had a similar issue but not quite the same. I upgraded from Precise
(installed at the factory on a Dell Sputnik device) to Trusty. After
upgrade, DNS did not work. I did have the /etc/resolv.conf symlink, but
the content generated by resolvconf just listed 127.0.0.1 twice (the old
address). Follo
The wine / nvidia-libopencl1-331-updates co-installability problem is
due to more than just bug 1313123 and the fix to bug 1313123 has not
fixed this issue:
user@hostname:~$ apt-cache policy nvidia-libopencl1-331-updates
nvidia-libopencl1-331-updates:
Installed: 331.38-0ubuntu7.1
Candidate: 33
** This bug is no longer a duplicate of bug 1247736
[SRU] nvidia-opencl-icd-* should not conflicts/replaces on opencl-icd
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1320217
Title:
installing w
Also, even with the fix to 331, wine is still not co-installable with
nvidia-libopencl1-331-updates for the reason in comment #33. Since that
is a problem in the wine dependencies rather than the nividia/opencl
dependencies, I am unduping bug 1320217 to cover the wine issue.
--
You received this
I hit this after upgrading from the Raring HWE stack to the Trusty HWE
stack. Fixed by manually recreating the symlink. (Also ran "sudo dpkg-
reconfigure -phigh xserver-xorg-lts-trusty" after finding this bug, for
good measure.)
--
You received this bug notification because you are a member of Ub
Public bug reported:
I was running Precise with the Raring HWE stack and I upgraded today to
the Trusty HWE stack and got this error. I guess something in the 3.13
kernel headers breaks the VirtualBox build.
ProblemType: Package
DistroRelease: Ubuntu 12.04
Package: virtualbox-dkms 4.1.12-dfsg-2ub
I sold this machine so I cannot provide any more information.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1101919
Title:
Display brightness is stuck at lowest setting on GeForce Go 7900 GS
To man
Can't seem to repro anymore. The disk unlock prompt changed to Dvorak at
some point.
** Changed in: initramfs-tools (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs
Public bug reported:
I have an encrypted root filesystem on /dev/dm-1 which I unlock at boot
with my password. After changing the system's keyboard layout to Dvorak
with "sudo dpkg-reconfigure keyboard-configuration", the keyboard layout
for the disk unlock prompt is still QWERTY. There also does
It rebuilds Linux's boot-time initialization environment from the latest
settings in /etc. Usually adding or removing the relevant package should
do it automatically, but in my case it was somehow out of sync.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Scanning old print photos at my local Walgreens results in a CD with PNG
files named with a .jpg extension, which triggers this bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/172416
Title:
eog d
Public bug reported:
The contents of /usr/share/app-install/desktop/skype.desktop specify
Exec=skype-wrapper, but there is no such program. As a result, after
installing Skype through the Ubuntu Software Center, clicking the
launcher icon does nothing. Changing the Exec line to Exec=skype
corrects
The file contains sensitive personal information so I can't share it
with anyone, sorry. The file was generated for me by GEICO. I don't know
what software or encryption method they used. If you can tell me how to
determine that from the file, I would be happy to do so. The evince
properties dialog
Public bug reported:
pdftk has a feature to decrypt password-protected PDF files, but it
doesn't work. It complains that the password is incorrect when in fact
it is correct. The qpdf tool works correctly with the same file and same
password.
$ pdftk K-TOYOTA.pdf output K-TOYOTA-2.pdf user_pw
Er
Public bug reported:
After updating to Raring, the next scheduled software update displayed a
dialog saying "Not all updates can be installed", but when I run "apt-
get dist-upgrade" it does not report any problems. See below. I have not
installed the updates yet so I can debug the problem if need
Happening for me too after recent updates. GPU hangs would happen up to
multiple times per minute. Originally I was running precise and using
the precise kernel/X11 stack. I reinstalled from 12.04.2 media with the
quantal kernel/X11 stack, but after getting the latest updates it
started happening a
Public bug reported:
I suspended my desktop to memory today (which I don't normally do) and
after resume from suspend it started periodically freezing. "top" showed
that the freezing was correlated with high CPU usage for the migration/N
kernel threads, as if the kernel was migrating threads back
Here's the PPD as requested.
** Attachment added: "MFC7220.ppd"
https://bugs.launchpad.net/ubuntu/+source/system-config-printer/+bug/782005/+attachment/3580566/+files/MFC7220.ppd
** Changed in: system-config-printer (Ubuntu)
Status: Invalid => New
--
You received this bug notificatio
This happened again, but on a different computer running Ubuntu 12.04. I
was having printer trouble and I noticed that the make and model showed
up as simply "Local Raw Printer". I attempted to change it to the
MFC-7220 but I was unable to click apply on the "Existing Settings"
page. I tried the fl
Confirmed that 0.2.4 compiled from source fixes the problem on Ubuntu
12.10 too (and it successfully recovered my file!).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1039698
Title:
extundelete cra
What about putting the conffile in a different directory, symlinking it
in the postinst, and deleting the link in the perm?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1113821
Title:
libvirt-bin d
That's still a bug. If you remove and reinstall the package, the file
won't come back.
** Also affects: lxc (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.ne
Public bug reported:
On my system, the conffile /etc/network/if-up.d/samba is missing. This
is because the samba package's maintainer scripts run rm_conffile for
it:
$ grep -F 'dpkg-maintscript-helper rm_conffile' /var/lib/dpkg/info/samba.*
/var/lib/dpkg/info/samba.postinst:dpkg-maintscript-helpe
Actually, dpkg-maintscript-helper rm_conffile is probably not the right
solution since the conffile is not obsolete.
Perhaps the conffile should be moved elsewhere (/etc/libvirt ?) and the
postinst/postrm should create/delete a symlink?
--
You received this bug notification because you are a mem
Public bug reported:
libvirt-bin deletes its own NON-obsolete conffile /etc/dnsmasq.d
/libvirt-bin in its postrm with "rm", but postrm runs on upgrade, so
this causes libvirt-bin to delete its own conffile on upgrade. Hence,
anything that relies on /etc/dnsmasq.d/libvirt-bin will break whenever
up
IMO it broke more than slightly.
Perhaps dkms could depend on linux-generic to prevent this? Even if the
installer is fixed, anyone who installs from the original ISO and
updates will hit this bug.
** Also affects: dkms (Ubuntu)
Importance: Undecided
Status: New
--
You received this b
Gotcha. Refusing to act makes sense. However, exiting without any error
seems like a valid bug to me.
** Changed in: parted (Ubuntu)
Status: Invalid => New
** Summary changed:
- partprobe silently fails where blockdev --rereadpt succeeds
+ If partprobe does not find a partition table, it
I securely erased the drive's entire data with shred. i.e.:
sudo shred /dev/sdd
So after this there was no longer a partition table at all. (Prior to
this, it was a DOS partition table.)
** Changed in: parted (Ubuntu)
Status: Incomplete => New
--
You received this bug notification becau
Public bug reported:
I ran shred on a hard drive (/dev/sdd) and then tried to run partprobe
to make the device node for its sole partition disappear (/dev/sdd1). It
was not mounted at the time. partprobe claimed to succeed, but in fact
it did nothing. Running "blockdev --rereadpt /dev/sdd" worked.
How can one take a screenshot in the greeter?
** Changed in: unity-greeter (Ubuntu)
Status: Incomplete => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1008284
Title:
Font size of shutdo
Good news! No repro on freshly-installed, fully up-to-date Ubuntu 12.10
amd64 using nvidia-current (version 304.51.really.304.43-0ubuntu1). I
tested Unity, GNOME Shell, and GNOME Classic (No Effects) with glxgears
and YouTube and I verifed that PowerMizer was switching performance
levels. Never saw
Public bug reported:
I have a Dell XPS M1710 with a GeForce Go 7900 GS and freshly-installed,
fully up-to-date Ubuntu 12.10 amd64. When using Nouveau (the default),
it is impossible to adjust the display brightness. Moving the slider in
Brightness and Lock has no effect on the actual display brigh
Workaround: manually install headers for the running kernel and then
reinstall nvidia-current.
$ sudo apt-get install linux-headers-3.5.0-22-generic
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
li
Public bug reported:
I have a freshly-installed, up-to-date Ubuntu 12.10 amd64 machine (Dell
XPS M1710 with GeForce Go 7900 GS). I installed nvidia-current from the
Additional Drivers tab of Software Sources and it said it succeeded, but
upon reboot graphics were busted. The display was low-resolu
Still repros in 12.10. Also repros in a LiveCD environment, so it's not
something with my install.
My computer is a System76 Leopard Extreme. I opened a System76 service
request but their technicians cannot reproduce the problem with their
hardware.
My girlfriend recently got a Dell XPS 13 Develo
I don't think it's valid to assume that any user that has installed the
samba package manually knows enough to install libpam-smbpass or manage
the passwords themselves. In this day and age, the web abounds with many
"tutorials" about all aspects of Ubuntu, most of which are grossly out
of date or
Possibly related to bug 998435.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/958549
Title:
Black screen on guest with anything except Cirrus
To manage notifications about this bug go to:
https://b
Possibly related to bug 958549.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/998435
Title:
qemu-kvm-spice doesn't support spice/qxl installs
To manage notifications about this bug go to:
https://
Same here. I was trying to install Win7 64-bit on 12.04 with qemu-kvm-
spice and neither qxl nor vga graphics would work--both showed a black
screen. Configuring the display as VNC instead of SPICE made no
difference. But choosing cirrus graphics made it work.
--
You received this bug notificatio
Public bug reported:
If you open the Folder Sharing dialog in Nautilus and click "Share this
folder" while neither the samba nor libpam-smbpass packages are
installed, then Nautilus automatically prompts you to install samba and
then libpam-smbpass. However, if samba is already installed and libpa
** Bug watch added: GNOME Bug Tracker #690930
https://bugzilla.gnome.org/show_bug.cgi?id=690930
** Also affects: evolution via
https://bugzilla.gnome.org/show_bug.cgi?id=690930
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of U
Attaching the diff as a file marked as a patch in the hope that it draws
some attention.
** Patch added: "Patch to /etc/init.d/ddclient that fixes the bug"
https://bugs.launchpad.net/ubuntu/+source/ddclient/+bug/980409/+attachment/3471573/+files/init-d-ddclient.patch
--
You received this bug
Still present in 12.10.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1025087
Title:
[regression] Double-clicking a date in calendar applet opens the
previous day in Evolution (again)
To manage n
I am experiencing a similar issue in 12.10 using Unity, filed as bug
1072531.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1046118
Title:
screen powers down after 10 minutes regardless of what Brig
I am using only lightdm and Unity. My lightdm.conf is attached above.
Also, in my case the screen does _not_ power down after 10 minutes, it
just displays black. i.e., the HDMI display connected to it shows that
it is still receiving a signal. By comparison, the "Turn off screen when
inactive" set
Thanks Alan. To my knowledge, Ubuntu actually has _never_ had a UI to
control this--screen blanking has always been disabled before. The UI
only allows the user to configure the time period for powering off the
display. Now it seems that screen blanking is mysteriously enabled on
some machines in 1
Note that creating a disk does work (although the application crashes at
the end) and it boots successfully.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1091980
Title:
Cannot select how to store d
Public bug reported:
In 12.10, when I try to create a USB startup disk I am unable to select
how to store documents and settings. The radio buttons and slider are
disabled and are stuck on "Stored in reserved extra space" with 0.0 MB.
Everything else in the UI appears to work.
ProblemType: Bug
D
Why was this changed to invalid? If you are theorizing that the bug may
be obsolete, I would be happy to check for you.
** Changed in: nvidia-graphics-drivers-180 (Ubuntu)
Status: Invalid => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscr
Public bug reported:
On this Dell Inspiron E1505, Jockey suggests to use the driver in bcmwl-
kernel-source for the BCM4311 wireless card. However, this driver
doesn't work. No wireless options show up in nm-applet. For wireless to
work, I have to remove bcmwl-kernel-source and install
firmware-b4
Confirmed the work-around. Here's the changes as a diff:
$ apt-diff ddclient
--- /tmp/apt-diff_1001/extracted/ddclient/etc/init.d/ddclient 2012-08-09
17:33:15.0 -0700
+++ /etc/init.d/ddclient2012-11-24 08:48:39.0 -0800
@@ -52,12 +52,12 @@
# 1 if daemon was alre
ext3 root fs:
$ sudo dumpe2fs -h /dev/sda1 | grep -E 'mount options|created'
dumpe2fs 1.42.5 (29-Jul-2012)
Default mount options:(none)
Filesystem created: Thu Sep 17 21:56:42 2009
ext4 homedir:
$ sudo dumpe2fs -h /dev/md0 | grep -E 'mount options|created'
dumpe2fs 1.42.5 (29-Jul-2012)
My fstab doesn't have the acl option set, and I don't recall the acl
option ever being there before. I installed this machine years ago from
9.04. Would the 9.04 installer have set that option? If not, perhaps
that explains the problem.
--
You received this bug notification because you are a memb
ext3 root fs for me
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1048059
Title:
Adding ACLs to /media/$user does not work
To manage notifications about this bug go to:
https://bugs.launchpad.net/u
I have now upgraded two other computers to 12.10 and neither of them
experience this issue ...
To the other people experiencing this bug: are you also using multi-head
/multi-seat? (If you've never heard those terms before, the answer is
probably no.)
--
You received this bug notification becaus
For me, Skype _was_ installed at the time of upgrade.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1025408
Title:
package libjbig0 2.0-2ubuntu1 failed to install/upgrade: no package
named `libjbi
Just an FYI for people that come across this bug: not all USB devices
are affected. USB passthrough is working for me with a Logitech C920
webcam in Ubuntu 12.10 (qemu-kvm 1.2.0), albeit with some video
freezing.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
I think the default value of 10 minutes is coming from
DEFAULT_SCREEN_SAVER_TIME in include/site.h. I don't understand why it
only affects one of my computers though ...
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
** Attachment added: "lightdm.conf"
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1072531/+attachment/3416979/+files/lightdm.conf
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1072531
Workaround: add this to xorg.conf (in my case, to both of them):
Section "ServerFlags"
Option "BlankTime" "0"
EndSection
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1072531
Title:
[r
** Attachment added: "xorg1.conf (for seat #1)"
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1072531/+attachment/3416955/+files/xorg1.conf
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bug
** Attachment added: "xorg0.conf (for seat #0)"
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1072531/+attachment/3416954/+files/xorg0.conf
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bug
Public bug reported:
After updating from Ubuntu 12.04 Precise to Ubuntu 12.10 Quantal, X11
has started automatically blanking the screen after 10 minutes of
inactivity even though I have set "Turn off screen when inactive" in
"Brightness and Lock" to 1 hour.
If I change "Turn off screen when inac
Public bug reported:
The cups package ships a default config at /etc/cups/cupsd.conf as a
dpkg conffile, and the CUPS server modifies this file automatically when
settings are changed through GUI tools (e.g., system-config-printer-
gnome). When the user upgrades to a later version of Ubuntu, there
Public bug reported:
After upgrading this computer from Ubuntu 12.04 Precise to Ubuntu 12.10
Quantal, I am no longer able to log in to it remotely with vnc4server
and use Unity. Upon connecting with VNC, I am presented with the Unity
greeter, and if I choose the default Unity session and log in th
Still repros in 12.10. Confirmed that qpdf --decrypt works around the
problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/492959
Title:
Evince cannot save filled PDF forms
To manage notification
Confirming that enabling said option breaks changing the input method
through the menu in the notification area icon. Although the selected
input method shows as checked in the menu, input actually continues to
use the previous input method. It similarly breaks the input method
changer menu in the
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1025087
Title:
[regression] Double-clicking a date in calendar applet opens the
previous day in Evolution (again)
To manage notifications about this b
Public bug reported:
This bug is back again. In Precise, double-clicking a date in the
calendar applet consistently opens the previous day in Evolution for me.
Looking in "ps", the calendar applet is launching Evolution with this
command-line for July 25:
evolution calendar:///?startdate=20120725
FYI, no longer repros for me in Precise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919157
Title:
The Evolution calendar opens with the wrong date
To manage notifications about this bug go to:
h
** Attachment added: "strace of Lone Survivor with lib32asound2 re-installed
but libasound2:i386 still used, so working sound"
https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1022811/+attachment/3218067/+files/strace3-lib32asound2-reinst.txt
** Description changed:
In Precise, lib3
** Attachment added: "strace of Lone Survivor with lib32asound2 removed and
working sound"
https://bugs.launchpad.net/ubuntu/+source/alsa-lib/+bug/1022811/+attachment/3218026/+files/strace2-no-lib32asound2.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, whi
** Attachment added: "strace of Lone Survivor with lib32asound2 installed and
broken sound"
https://bugs.launchpad.net/bugs/1022811/+attachment/3218024/+files/strace1-with-lib32asound2.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to U
Public bug reported:
In Precise, lib32asound2 looks for plugins in /usr/lib32/alsa-lib, but
they are no longer there. The 32-bit plugins are provided by
libasound2-plugins:i386 and are in /usr/lib/i386-linux-gnu/alsa-lib.
Thus any program using the 32-bit libasound binary from lib32asound2
will fa
Still a problem in 12.04 precise.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/879066
Title:
10bit video does not play
To manage notifications about this bug go to:
https://bugs.launchpad.net/gstr
FYI, this definitely did NOT happen for me on 11.10.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/990909
Title:
[regression][precise] Focus-follow-mouse is no longer compatible with
fullscreen Fl
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1008284
Title:
Font size of shutdown dialog in Unity greeter is tiny and unreadable
To manage notifications about this bug go to:
https://bugs.launchpad
Public bug reported:
On my desktop computer (System76 Leopard Extreme, model leo1), the font
size of the shutdown dialog in the Unity greeter is so tiny that the
text is unreadable. This includes the text on the dialog title and
buttons too. This is very frustrating when shutting down or restartin
Retitling since the consensus is that this affects all apps that forward
keystrokes.
** Summary changed:
- Pressing the Super (windows) key while in Virtual Machine Manager no longer
works
+ Pressing the Super (windows) key while in full screen virtual machine or
remoting apps no longer works
This is a regression in Precise. I definitely do not think this
qualifies as an opinion.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/967294
Title:
Unity panel shadow should not draw over unfocusse
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1007898
Title:
Update Manager window often freezes and is invisible when computer is
left on for a while
To manage notifications about this bug go to:
Public bug reported:
I have a System76 Serval Pro (serp7) and very often Update Manager will
hang on it. This happens when I leave the computer on for a day and the
periodic check for updates occurs. When I come back the next day, I can
see in the Unity launcher that Update Manager is open with pe
Also repros with 802.11n disabled via:
sudo rmmod iwlwifi
sudo modprobe iwlwifi 11n_disable=1
So apparently not related to 802.11n as I thought.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/825897
As another test I left my computer connected to only wired, but that did
_not_ repro the bug after 1 day. So it seems that having a wireless
connection is a requirement.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
Interestingly, physically disconnecting the wired network while the
applet was unresponsive _did_ correctly update the applet state, so it
wasn't totally hung. But the sub-menus continued to be empty and
clicking on anything in the main applet menu continued to be ignored.
--
You received this bu
As a test I left my computer connected to both wired _and_ wireless, and
that also repro'ed the bug after 1 day.
Update Manager was open with 4 updates, but it was working properly, so
probably the Update Manager hang before was unrelated.
--
You received this bug notification because you are a
Any chance we could get the fix pulled into a new package in precise-
proposed?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/981289
Title:
Window list entries colored in white instead of dark (GNOM
Some more information:
I can repro this 100% of the time by enabling wireless, connecting to my
802.11n router, disconnecting from the wired network, and leaving the
computer on for a long time. 1 day seems to be sufficient. After that,
the NM applet becomes unresponsive--clicking on any menu item
I continue to experience this in 12.04. I am unduping since the symptoms
and chronology of this bug bear no resemblance to bug 684599.
** This bug is no longer a duplicate of bug 684599
Memory leak in nm-applet
--
You received this bug notification because you are a member of Ubuntu
Bugs, whi
Public bug reported:
Starting immediately after update from Oneiric to Precise, focus-
follows-mouse no longer works with fullscreen Flash. When focus-follows-
mouse is enabled, attempting to go fullscreen in a Flash video fails.
The fullscreen window opens momentarily and then disappears. Very
oc
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/990909
Title:
[regression][precise] Focus-follow-mouse is no longer compatible with
fullscreen Flash
To manage notifications about this bug go to:
htt
I also experienced this issue (in Lucid) with a kernel whose package had
since been removed. I found by strace'ing update-initramfs that it gets
the kernel list from the contents of /var/lib/initramfs-tools/. There's
one entry there per kernel. Deleting the one for my removed kernel fixed
the probl
The update in oneiric-proposed fixed the problem for me. Thanks.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/881862
Title:
svn up Segmentation Fault with sasl enabled repositories
To manage notif
I had this same problem on Ubuntu 11.10 64-bit with a Brother MFC-7220
and the brscan2 driver. Printing worked fine, but attempting to scan
gave the "Invalid argument" error. In my case it turned out that the
issue was that it didn't work with USB 3.0 ports. Whenever it was
plugged into a USB 3.0 p
This bug should also be marked as a security issue on account of the
O_EXCL problem (see comment #4), but I couldn't figure out how to add
the security flag to the bug.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launc
1 - 100 of 548 matches
Mail list logo
