Re: [systemd-devel] bridge vlan-aware

To add more info. Also br0 has to allow vlan 166 to pass through. This was my mistake

Re: [systemd-devel] bridge vlan-aware

I've fixed the systemd configuration and now everything works as expected. The config was wrong. Thanks anyway to chime in

Re: [systemd-devel] bridge vlan-aware

On 19.11.2022 12:26, Salvatore Mazzarino wrote: bridge vlan show port vlan-id enp89s0 1 PVID Egress Untagged br0     1 PVID Egress Untagged br166   1 PVID Egress Untagged eth.166 1 Egress Untagged         166 PVID Egress Untagged virbr0  1 PVID Egress Untagged Just to understand. I attach VMs

Re: [systemd-devel] bridge vlan-aware

Also to prove that it’s not a switch issue I have launched this configuration and everything works. VMs get IP in the VLAN 166. However this configuration is not very dynamic because I cannot control Libvirt vnet names so I need to match all the vnet interfaces. salmazz@nux-11-i7 /e/s/network>

Re: [systemd-devel] bridge vlan-aware

bridge vlan show port vlan-id enp89s0 1 PVID Egress Untagged br0     1 PVID Egress Untagged br166   1 PVID Egress Untagged eth.166 1 Egress Untagged         166 PVID Egress Untagged virbr0  1 PVID Egress Untagged Just to understand. I attach VMs to the br166. In this case also enp89s0 should all

Re: [systemd-devel] bridge vlan-aware

I do not think it's a switch issue. The systemd configuration is surely wrong but I'm not sure where.

Re: [systemd-devel] bridge vlan-aware

Please reply to list On 19.11.2022 12:05, Salvatore Mazzarino wrote: The vlan 166 has a dhcp server. The switch port is set to accept tagged and untagged traffic. I am not sure what "accept tagged and untagged" traffic does on your switch. But so far it sounds more like switch configurati

Re: [systemd-devel] bridge vlan-aware

On 18.11.2022 03:46, Salvatore Mazzarino wrote: Posted a wrong config for br0.netdev. the correct one is the following br0.netdev [NetDev] Name=br0 Kind=bridge [Bridge] DefaultPVID=1 VLANFiltering=yes On Fri, Nov 18, 2022 at 1:43 AM Salvatore Mazzarino wrote: I have a physical interface na

Re: [systemd-devel] bridge vlan-aware

Posted a wrong config for br0.netdev. the correct one is the following br0.netdev [NetDev] Name=br0 Kind=bridge [Bridge] DefaultPVID=1 VLANFiltering=yes On Fri, Nov 18, 2022 at 1:43 AM Salvatore Mazzarino wrote: > I have a physical interface named enp89s0 on a machine which runs VM with > lib

[systemd-devel] bridge vlan-aware

I have a physical interface named enp89s0 on a machine which runs VM with libvirt.These VMs have to run in a VLAN. The physical interface is attached to the default VLAN (1). My config br0.dev [NetDev] Name=br166 Kind=bridge br0.network [Match] Name=br0 [Network] VLAN=eth.1 VLAN=eth.166 [Bri