"systemd-analyze time" directly provides time.
I don't know about journalctl MESSAGE_ID.
On Mon, 28 Jan 2019, 5:40 pm Mantas Mikulėnas On Mon, Jan 28, 2019 at 11:22 AM deepan muthusamy
> wrote:
>
>> My target(RCAR-H3) runs with yocto project have boot up time of 13
&g
stemd is run inside a
> container (since it makes no sense). There might be something wrong with
> container detection here, though...
>
> Le lun. 28 janv. 2019 à 10:22, deepan muthusamy
> a écrit :
>
>> My target(RCAR-H3) runs with yocto project have boot up time of 13
>&
My target(RCAR-H3) runs with yocto project have boot up time of 13 seconds
before init starts as of my observation. because I am starting Weston in
basic.target which is starting after 13 seconds from the time I pressed
power button.
Note: I am booting the board from SD card(The image is in SD car
If I start my application manually, CPU consumption is less than 2%.
If I start same application as system service, CPU consumption is more than
100%.
There is no cout statements in my application.
I tried to start under a *screen* as system service. This time consumption
has reduced little bit.
Hi,
Still iam not clear about what to do in service.
Can u please tell me what are all the things I have to add in .service file
to store all logs into a log file.
On Wed, 21 Nov 2018, 2:23 pm deepan muthusamy Hi,
> How to log systemd service into log.txt file.
> This file should be ava
Hi,
How to log systemd service into log.txt file.
This file should be available after system restart also.
How to do this?
___
systemd-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/systemd-devel
Will journalctl shows std::cout outputs of a service ?
___
systemd-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/systemd-devel
. @ Mantas
On Thu, 8 Nov 2018, 11:28 pm Mantas Mikulėnas On Thu, Nov 8, 2018 at 3:27 PM deepan muthusamy
> wrote:
>
>> I have two applications. App1 is UI application. App2 is console
>> application.
>> Both are communicating through Dbus(session). If I press a button i
If I start my application as system service, it is consuming huge memory.
This leads to my system getting slow down.
If I start manually, it's not consuming that much memory.
What can be the possible reasons?
___
systemd-devel mailing list
systemd-devel@
I have two applications. App1 is UI application. App2 is console
application.
Both are communicating through Dbus(session). If I press a button in app1,
aap2 should receive the data immediately.
If I start both of them manually , they are working as expected.
If I start as system service, it is
Hi,
I followed the steps in
https://gitlab.freedesktop.org/wayland/weston/merge_requests/39/diffs
It's working fine.
Thank you all..
On Wed, 31 Oct 2018, 5:49 pm Jérémy Rosen, wrote:
>
>
> On 31/10/2018 12:40, Pekka Paalanen wrote:
>
> On Wed, 31 Oct 2018 11:32:45 +0100
> Jérémy Rosen wrote:
t might hide the wayland socket
> from app2 ?
>
> On 31/10/2018 08:21, deepan muthusamy wrote:
>
> Hi,
> I started app1(this is a UI application) as system service .
> I started app2( this is Weston ) also as system service. But in different
> tty(tty7).
>
> App1 is depend
Hi,
I started app1(this is a UI application) as system service .
I started app2( this is Weston ) also as system service. But in different
tty(tty7).
App1 is depended on app2 to start.
I added that dependency.
App2 is started but app1 not able to find that dependency. Iam getting
error as not abl
I have one doubt that, if I launch app1 under tty1 andapp2 at tty7. If I
add after dependency in app2 for app1( After=app1.service in app2.service).
will this dependency work?
How to launch an application at specific try(like under tty7)?
___
systemd-
What is the difference between dbus service and bus-activatable service?
___
systemd-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/systemd-devel
I subscribed to mailing list, eventhough iam not getting mail notification
everytime. So in continuation to previous message
https://lists.freedesktop.org/archives/systemd-devel/2018-September/041365.html
I want my myservice.service should start when this path is available.
Yaa, Path unit should
Hi,
My myservice.path is as follows:
*[Unit]*
*PartOf=myservice.service*
*[Path]*
*PathExists=/run/user/1000*
*[Install]*
*WantedBy=basic.target*
Iam getting the following error:
*myservice.path: Refusing to start, unit to trigger not loaded.*
Want can be the possible reason for error.
Hi,
My myservice.path is as follows:
[Unit]
PartOf=myservice.service
[Path]
PathExists=/run/user/1000
[Install]
WantedBy=basic.target
Iam getting the following error:
myservice.path: Refusing to start, unit to trigger not loaded.
Want can be the possible reason for error??
_
12, 2018 at 4:19 PM deepan muthusamy
> wrote:
>
>> Can anyone give a demo of how path based activation works?
>>
>> I referred cups Daemon, but the same thing not working for me..
>>
>
> Path based activation is one of the simpler types – it waits for inotify
&
Can anyone give a demo of how path based activation works?
I referred cups Daemon, but the same thing not working for me..
___
systemd-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/systemd-devel
How to set up environmental variable common for all system services.
For example,
If I set environment variable(Environment="variable=data") in
mysystem.service file, it's scope is in that file only. I want that
variable available to all service file. What should I do?
s it depend on any services,
> any hardware devices?
>
> Are you starting the application as a system service, or as a --user
> service?
>
> Why are you using basic.target?
>
> On Wed, Aug 29, 2018 at 3:55 PM deepan muthusamy
> wrote:
>
>> Hi,
>> I have
Hi,
I have a hmi application(without touch feature enabled) created using cgi.
If I start that application under basic.target, it's running successfully.
But if I start that application( with touch enabled) under basic.target it
is failing to start.
Even systemctl --user start hmi.service also fai
Enforcing journald diskspace limit. (Frédéric HILPERT)
>2. Not able to access system device from session service
> (deepan muthusamy)
>3. Re: Not able to access system device from session service
> (Silvio Knizek)
>4. systemd oneshot service stop on shutdo
I started one application as system service in /etc/systemd/system by
giving command "systemctl start mysystem.service".
I have one more application which i have to start as session service in
etc/systemd/user by giving command "systemctl --user start
mysession.service".
My session.service has d
Thank you for the clarification.
On Tue, 14 Aug 2018, 3:22 pm Mantas Mikulėnas, wrote:
> On Tue, Aug 14, 2018 at 11:49 AM deepan muthusamy
> wrote:
>
>> I have to start all my applications through systemd. But when I am trying
>> to start even A2, A3, A4 also i a
Sorry for my grammatical mistakes.
I have to start all my applications through systemd. But when I am trying
to start even A2, A3, A4 also i am facing same problem.
On Tue, 14 Aug 2018, 12:16 pm deepan muthusamy,
wrote:
> I am not that much clear about booting process, but I will explain w
application
trying to get session dbus connection, it is failing.
I come to know that it is possible from your previous replies. But I don't
know how to do that. Can you please help me this?
On Tue, 14 Aug 2018, 10:15 am Mantas Mikulėnas, wrote:
> On Tue, Aug 14, 2018 at 7:21 AM deepan m
I have an application which has to communicate with systemd to monitor
other process and it has to communicate with other session applications ,
so my application is designed to communicate to both session dbus and
system dbus. And also my application has to be started as service by
systemd. How to
to start at boot
time by systemd. Is it possible? If possible what are all the changes I have to
make?
My target board is rcar H3. My target os is yocto project with genivi meta ivi
system.
DEEPAN MUTHUSAMY,
TATA CONSULTANCY SERVICE,
mobile no: +91 8012309210
My application has to communicate to both system dbus and session dbus and I
want to start my application through systemd. How to do that?
DEEPAN MUTHUSAMY,
TATA CONSULTANCY SERVICE,
mobile no: +91 8012309210
From: systemd-devel on behalf of
systemd
After= dbus.socket
[Service]
Type=dbus
BusName=org.client
ExecStart=/usr/local/bin/myExe
TimeoutSec=300
WatchdogSec=20
[Install]
WantedBy=basic.target
Operating system:
Ubuntu 16.04 (64-bit)
DEEPAN MUTHUSAMY,
TATA CONSULTANCY SERVICE,
mobile no: +91 8012309210
32 matches
Mail list logo
