As far as I can tell the clinet you are using is a BootStrpa client and
not a DHCP one. ::Shrugs::
Ben Jackson - [EMAIL PROTECTED] - http://www.esgeroth.org/~zaphod
-BEGIN GEEK CODE BLOCK-
Version 3.12
GAT d- s+:++ a19 C$ UL P++ L++$ E-- W+++ N++
o+ K++ w+ O--- M
Kernel 2.2.5-15
Script started on Wed Nov 10 21:10:22 1999
~
[root@staats]# tcpdump -i eth0 -n -v
tcpdump: WARNING: SIOCGIFADDR: eth0: Cannot assign requested address
tcpdump: listening on eth0
tcpdump: pcap_loop: read: Network is down
~
[root@staats]# ifconfig eth0 up
~
[root@staats]# tcpdump -i
I'm using kernel 2.2.5.15 - I'll get you a tcpdump in a moment...
--
Sean Staats
[EMAIL PROTECTED] - email
(512) 682-6900 x9629 - voicemail/fax
Benjamin Jackson <[EMAIL PROTECTED]> wrote:
> What Kernel are you running. I had trouble with DHCP when I upgraded on of> my
>machines over to
It doesn't work even when I assign it an IP address that should be valid
for the network I'm on.
--
> From: Steve Borho <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: ethernet setup
> Date: Wednesday, November 10, 1999 12:31 PM
>
> On Wed
On Wed, Nov 10, 1999 at 10:24:57AM -0800, Sean Staats wrote:
> I made sure that the ethernet card does get recognized at boot time and
> I now understand that eth0 is an interface and not a device so there
> won't be such a thing as /dev/eth0. I typed "ifconfig eth0 up" and got
> no error message
I made sure that the ethernet card does get recognized at boot time and I now
understand that eth0 is an interface and not a device so there won't be such a thing
as /dev/eth0. I typed "ifconfig eth0 up" and got no error messages. I typed
"ifconfig eth0" and it gave me a lot of information ab
I made sure that the ethernet card does get recognized at boot time and I now
understand that eth0 is an interface and not a device so there won't be such a thing
as /dev/eth0. I typed "ifconfig eth0 up" and got no error messages. I typed
"ifconfig eth0" and it gave me a lot of information ab
What does it say when you do a 'ifconfig eth0 up'?
Ben Jackson - [EMAIL PROTECTED] - http://www.esgeroth.org/~zaphod
-BEGIN GEEK CODE BLOCK-
Version 3.12
GAT d- s+:++ a19 C$ UL P++ L++$ E-- W+++ N++
o+ K++ w+ O--- M-- V PS--- PE+++ Y+(++) PGP+ t+++
5+++
I'm trying to setup a Linksys Etherfast LNE100TX 10/100 card. dmesg | grep -i eth
shows that it is getting recognized, but the interface startup fails (using DHCP). I
used netcfg to configure it as eth0, but I noticed there is no /dev/eth0 device file.
Is that the way it is supposed to be?
