On Tue, 28 Jan 2003 09:49:16 +0100 (MET), "Lars Lundgren"
<[EMAIL PROTECTED]> said:
>
> Has anybody seen this problem? Do you have a solution?
Sorry, I do not have an answer.
I'm just adding my problem to yours... I have a HP 4MV with a LaserJet
card (J2550), and have the exact same problem.
So
Has anybody seen this problem? Do you have a solution?
On Wed, 22 Jan 2003, Lars Lundgren wrote:
>
> I have a printing problem. The printer works, but the thing that does not
> work is printing HTML pages from for example mozilla. When printing any
> html-document the last page will always be i
Hi there,
Not sure where to even begin looking this time -- I've been running the
up2date program and got most of it completed now.
Included were the Omni drivers and foomatic (I think), well now my old
Okidata OLe 600 laser printer won't work anymore.
It took forever to get a printer going in
Look for error messages in /var/log/messages
or in /var/spool/lpd//log
might give you an idea of what's wrong.
On Wed, 2002-10-09 at 13:58, sarahtf wrote:
> I am having a whole lot of trouble trying to get my HP5550 printer to
> work with Linux. Works just fine on Windows, so I know it's not t
I am having a whole lot of trouble trying to get my HP5550 printer to
work with Linux. Works just fine on Windows, so I know it's not the
printer. It is supposed to work "perfectly" according to linuxprinting.org.
It took awhile, but I managed to get HPIJS, Ghostscript and Foomatic
updated and
I connected a Samsung ML-1210 printer to my usb port and rebooted machine
running RedHat 7.2. I used printconf-gui to setup the printer with gdi
driver. During this process, /dev/usb/lp0 does manage to present "Samsung
Electronics" under "model" column, so I'm guessing the usb stuff is workin
Hello folks ,
I'm just getting started with Linux. ( My pc : a Dual boot ; winXp - Redhat 7.3 ; AMD
ThunderBird 1Ghz )
While configuring Redhat to my needs , I have 2 problems - at this moment :)
1.) I have a 'Guillemot Maxi TV PCI 3' Television Card.
The quality in Win XP sucks big tim
hello,
I have RH7 linux box and samba 2.0.7 compiled with
nss_wins support. I cannot print to a share WinNT
HPlasejet 4000 printer. Here are my /etc/printcap,
/var/spool/lpd/lp/.config and status.lp files.
printcap file
##PRINTTOOL3## SMB
lp:\
:sd=/var/spool/lpd/lp:\
:mx#0:\
ap file in manully.
>
> Thanks
> selim
> - Original Message -
> From: "John Aldrich" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Sunday, September 17, 2000 10:31 AM
> Subject: Re: Mouse and Printer problem(from [EMAIL PROTECTED])
>
On Sun, 17 Sep 2000, Selim Jahangir wrote:
> Dear John
> In response to my question about printer configuration , you suggested to
> look linuxconf but sorry i have found nothing about configuration about
> printer. Please u check again.
>
> Please tell me about a tool without editing printcap f
-
From: "John Aldrich" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, September 17, 2000 10:31 AM
Subject: Re: Mouse and Printer problem(from [EMAIL PROTECTED])
> On Sat, 16 Sep 2000, Selim Jahangir wrote:
> >
> > Hi all !!
> > I am in
On Sat, 16 Sep 2000, Selim Jahangir wrote:
>
> Hi all !!
> I am in a problem with mouse configuration in rh62.
> When I use mouseconfig tool for configuration it works sometimes in commnad mode but
>in X-window it does not respond. I can work with mouse in X-window. Any help ?
>
> I can not con
Hi all !!
I am in a problem with mouse configuration in
rh62.
When I use mouseconfig tool for configuration it
works sometimes in commnad mode but in X-window it does not respond. I can work
with mouse in X-window. Any help ?
I can not configure printer without control panel
or "printool"
Dave Reed wrote:
> > Date: Wed, 13 Sep 2000 18:33:06 -0500
> > From: "Rev. David P. Giffen" <[EMAIL PROTECTED]>
> >
> > I solved my printer problem by just giving up on Redhat 6.1 and bought
> > Redhat 6.2. This plan worked. Now then I have been l
> Date: Wed, 13 Sep 2000 18:33:06 -0500
> From: "Rev. David P. Giffen" <[EMAIL PROTECTED]>
>
> I solved my printer problem by just giving up on Redhat 6.1 and bought
> Redhat 6.2. This plan worked. Now then I have been looking into my
> sound card problem and h
On Wed, 13 Sep 2000, Rev. David P. Giffen wrote:
> I solved my printer problem by just giving up on Redhat 6.1 and bought
> Redhat 6.2. This plan worked. Now then I have been looking into my
> sound card problem and have gotten to the stage of hacking my
> isapnpp.conf file. So I
I solved my printer problem by just giving up on Redhat 6.1 and bought
Redhat 6.2. This plan worked. Now then I have been looking into my
sound card problem and have gotten to the stage of hacking my
isapnpp.conf file. So I have to find an unused IO address and IRQs. Can
anyone tell me which
>Daemon won't start
try, as root on your 6.2 system
/usr/sbin/lpc restart
Jack
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
___
Redhat-list mailin
>I am running Red Hat 6.2 on one of the boxes in my lab. I want to
>set up a remote printer that connects to another pc (Red Hat 6.1). >I
>used printtool to set up the remote printer but without success. >Daemon
>won't start on the remote
>host. I checked hosts.lpd and it is ok. I don't have
"Eduardo M. A. M. Mendes" wrote:
> Hello
> I am running Red Hat 6.2 on one of the boxes in my lab. I want to
> set up a remote printer that connects to another pc (Red Hat 6.1). I
> used printtool to set up the remote printer but without success. Daemon
> won't start on the remote
> host. I
Hello
I am running Red Hat 6.2 on one of the boxes in my lab. I want to
set up a remote printer that connects to another pc (Red Hat 6.1). I
used printtool to set up the remote printer but without success. Daemon
won't start on the remote
host. I checked hosts.lpd and it is ok. I don't have
Hello
I have just installed Red Hat 6.2 in one of the PCs in the lab. The
printer is attached to a Red Hat 6.1
box and works fine (two NTs using samba and a Solaris 2.6 can print
without a problem). I tried to
use printtool to set up the printer (as remote printer) on the Red Hat
6.2 but the
Hi
Having trouble with the print queue.
If I "lpq -l -Plj4mplus" I get a list of queued jobs that
won't print. This listing then hangs for about 3-4 minutes
before telling me that 192.168.14.15 [the printers onboard
queue
is not available - yet it will usually print one of the
queued
prin
Hi
Having trouble with the print queue.
If I "lpq -l -Plj4mplus" I get a list of queued jobs that
won't print. This listing does not go back to the bash
prompt after listing but I must do a CTRL+C to get back to
prompt. I don't want to lose the print jobs. How can I
recover these print job
>But you are right about the updates and errata page I had to dig a
>little to find it since I had seen it there. I drilled in to the 6.1
>stuff from the support page.
Thanks, I've printed out the page. Noticed how you mentioned you had to
"drill" in order to be able to find this stuff. This s
Vidiot wrote:
>
> >RH 6.1 dosen't even see my printer port. Can't find where I should even
> >begin to look to solve this problem. Thanks for anyhelp.
>
> See if the following line is in your /etc/conf.modules file.
>
> alias parport_lowlevel parport_pc
>
> If not, add it.
>
> F
>RH 6.1 dosen't even see my printer port. Can't find where I should even
>begin to look to solve this problem. Thanks for anyhelp.
See if the following line is in your /etc/conf.modules file.
alias parport_lowlevel parport_pc
If not, add it.
Funny thing is that I was told that this
RH 6.1 dosen't even see my printer port. Can't find where I should even
begin to look to solve this problem. Thanks for anyhelp.
--
To unsubscribe: mail [EMAIL PROTECTED] with "unsubscribe"
as the Subject.
In <[EMAIL PROTECTED]>, on 02/16/00
at 01:58 PM, "Mathco Tech. Dep" <[EMAIL PROTECTED]> typed:
>We have a HP DeskJet 970 series printer at work
>on a Windows 98 computer (i know i know), anyway
>i like to be able to print to that printer
>from a Linux machine, and to a point i do succeed.
>I
Hi
We have a HP DeskJet 970 series printer at work
on a Windows 98 computer (i know i know), anyway
i like to be able to print to that printer
from a Linux machine, and to a point i do succeed.
I installed the ghostscript software found on
contrib.redhat.com but when i try to print a postscript
t
>
>
> I have an HP Laserjet series II. I'm trying to print postscipt
> files. I'm using "gs -sDEVICE=laserjet -r150 myfile.ps
> -sOutputFile=test.ps" to produce an output file called test.ps.
> If I try to print test.ps, my printer lights blink, but nothing
> prints. If I then print a
I have an HP Laserjet series II. I'm trying to print postscipt
files. I'm using "gs -sDEVICE=laserjet -r150 myfile.ps
-sOutputFile=test.ps" to produce an output file called test.ps.
If I try to print test.ps, my printer lights blink, but nothing
prints. If I then print a simpler text
> Dear friends,
> I have a question. Using SCO and RH5, I set up the RH5 box to be on the
> receiving end of remote printing requests for a printer on the RH5 parallel
> port.
> It works, but I noticed that it ( a dot matrix printer ) will print 10 or 15
I don't think that's a real problem
Dear friends,
I have a question. Using SCO and RH5, I set up the RH5 box to be on the
receiving end of remote printing requests for a printer on the RH5 parallel
port.
It works, but I noticed that it ( a dot matrix printer ) will print 10 or 15
lines, pause,
then print 10 or 15 more, paus
34 matches
Mail list logo
