DUH!!! Never mind. Had the machine plugged into the "UPLINK" port of
my hub. It could see the other computer on the hub, but nothing past
the hub.
-Rich
I did a new install on a computer and I thought I went through the
same steps we did on the other RH9 servers we us in our office. I
bro
I did a new install on a computer and I thought I went through the
same steps we did on the other RH9 servers we us in our office. I
brought the machine up and now when I try to access the internet or
even on of the other computers in our office I can't see anything.
I am able to ping the new
. very easy and fast :-)
-Original Message-
From: John Nichel [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2003 8:47 AM
To: [EMAIL PROTECTED]
Subject: Re: Linux - Win Xp home network - shared files
Campbell, Michael (Contractor) wrote:
> Where do you get the softwares SAMBA
Campbell, Michael (Contractor) wrote:
Where do you get the softwares SAMBA or Webmin?
Samba is on your Red Hat CD's (if not already installed on your machine).
Google --> Webmin
--
By-Tor.com
It's all about the Rush
http://www.by-tor.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROT
Where do you get the softwares SAMBA or Webmin?
-Original Message-
From: Jason Tesser [mailto:[EMAIL PROTECTED]
Sent: Thursday, October 16, 2003 8:13 AM
To: [EMAIL PROTECTED]
Subject: RE: Linux - Win Xp home network - shared files
What these guys said is correct but it is easier for a
eated. You can
click that if you choose.
At this point you should be good to go. Hit start samba in webmin or apply changes
and you
should be good to go. Go to your WIndows box and click on your workgroup and browse
you
Linux machine. Go into network(Gnome) and click on your workgroup. Go
Thank you all. I am working on it and go figure the
document
--- John Nichel <[EMAIL PROTECTED]> wrote:
> truc nguyen wrote:
>
> > After I edit smb.conf. Can you tell me
> > - What linux commands to view the shared files in
> XP
> > (C:\network)
> > - W
On 14-Oct-2003/20:18 -0700, truc nguyen <[EMAIL PROTECTED]> wrote:
>After I edit smb.conf. Can you tell me
>- What linux commands to view the shared files in XP
>(C:\network)
IF you're running Nautilus or Konqueror, try typing "smb:///" in the
address bar.
>-
T or something like that:
>
> I also recommend very highly the documentation at http://www.samba.org.
> When I was messing with my home network, that site helped tremendously.
> The documentation is available in several different languages.
>
> Also, any good thick tome
n at http://www.samba.org.
When I was messing with my home network, that site helped tremendously.
The documentation is available in several different languages.
Also, any good thick tome on Red Hat Linux should provide some good
information about Samba as well.
--
Slainte,
Richard S. Crawford
AIM: Buff
On Tue, 2003-10-14 at 22:34, John Nichel wrote:
> truc nguyen wrote:
> You can mount the remote filesystem
>
> mount -t smbfs -o usename=WindowsUser,password=WindowPass
> //WinXPmachine/sharename /mnt/mountpoint
>
> Or you can use smbclient to see the shares, and access them (like
> comman
truc nguyen wrote:
After I edit smb.conf. Can you tell me
- What linux commands to view the shared files in XP
(C:\network)
- What linux commands to enable the shared file
/home/net/temp
- How Win XP view shared files in /home/net/temp
Thanks,
You can mount the remote filesystem
mount -t
After I edit smb.conf. Can you tell me
- What linux commands to view the shared files in XP
(C:\network)
- What linux commands to enable the shared file
/home/net/temp
- How Win XP view shared files in /home/net/temp
Thanks,
--- Edward Dekkers <[EMAIL PROTECTED]>
wrote:
> truc ngu
truc nguyen wrote:
I have a Linux and a Win XP on home network.
I also enabled the file sharing C:\network
On the Linux machine, I have user /home/net
How is Win XP able to see /home/net/temp ?
How can Linux share C:\network from Win XP?
Samba should be a solution but what command do I use
I have a Linux and a Win XP on home network.
I also enabled the file sharing C:\network
On the Linux machine, I have user /home/net
How is Win XP able to see /home/net/temp ?
How can Linux share C:\network from Win XP?
Samba should be a solution but what command do I use ?
Any suggestion
fig" will give you some interesting "see also"s for other
> commands you may find helpful, but ifconfig might be all you need for
> this task.
Yep, that and restarting iptables did the trick ;-)
I can't seem to connect to a remote desktop though. When I try to
'br
match, and try service iptables stop.
Ok, where will i find the subnet mask? - And, are there any tools or
command line apps to inspect the network? - I'm not even sure of the
hostnames... ;-)
"ifconfig" at the command line will display the status and interesting
data about active
p.
Ok, where will i find the subnet mask? - And, are there any tools or
command line apps to inspect the network? - I'm not even sure of the
hostnames... ;-)
Thanks!
--
Nick W
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
k Wilson [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, October 07, 2003 12:39 PM
> To: RedHat-List
> Subject: Re: Network Troubleshooting Help
>
>
>
> * and then Nick Wilson declared
> > Whilst fixing my nvnet driver though, I seem to have lost
> the networ
* and then Nick Wilson declared
> Whilst fixing my nvnet driver though, I seem to have lost the network to
> my wifes PC connected via an adsl hub. Earlier I could ping our ip
> address and send/recieve packets but no longer can...
BTW, I can ping my machine from my wifes, (if t
Hi all,
So, I'm connected to the net, and have an x-system (if you've seen my
other posts..).
Whilst fixing my nvnet driver though, I seem to have lost the network to
my wifes PC connected via an adsl hub. Earlier I could ping our ip
address and send/recieve packets but no longer c
At 11:30 10/3/2003, you wrote:
I use the Intel cards which have AFT software. It allows me to bond
ports. I have two dual nics. I pair the first port on the first card with
the second port on the second and then reverse that for the
second pair. Then I have one of each pair go to a
different switch
Ok, thanks for the tip
Now, how do I activate bonding or where can I download
the correct bonding driver, since I don't have this file
/etc/sysconfig/network-scripts/ifcfg-bond0.
Thanks!
- Original Message -
From:
mwafkowski
To: [EMAIL PROTECTED]
Sent: Friday, Oc
On Fri, 2003-10-03 at 12:52, mike wrote:
> Hi!
> I have Red Hat 9 with 2 network cards, I want to make a load balance
> but I don't know how too fuse them, is there any way to do this?
> Thanks for your help
Mike, that depends on the card. I use the Intel cards which have AFT
so
2:52
PM
Subject: Two network cards as one
Hi!
I have Red Hat 9 with 2 network cards, I want to make a
load balance but I don't know how too fuse them, is there any way to do
this?
Thanks for your help
---Outgoing mail is certified Virus
Free.Checked by AVG anti-vir
Hi!
I have Red Hat 9 with 2 network cards, I want to make a
load balance but I don't know how too fuse them, is there any way to do
this?
Thanks for your help
Karasik, Vitaly said:
> /usr/src/linux-2.4/configs
doh! yep found it there. had been lookin on the CD, used to
debian's system which stores the kernel config in the same directory
as the floppy images.
> did you read http://www.linuxjournal.com/article.php?sid=6473 (Hacking Red
> Hat Kickstart)
I am sorry but I haven't received your mail
directed to me so I'll disregard any information from the mail that I'm viewing
now from mr. Paul Rushing.
I do believe that load balancing is a
false problem for a network made out of 50 computers. I have seen LANs made out
o
On Thu, 2003-10-02 at 01:02, Karasik, Vitaly wrote:
> >Date: Wed, 1 Oct 2003 14:37:39 -0700 (PDT)
> >Subject: hacking the redhat network install disk/kernel
>
> >- anyone know where I can find the config that redhat used for
> >the 2.4.7-10BOOT kernel?
>
>Date: Wed, 1 Oct 2003 14:37:39 -0700 (PDT)
>Subject: hacking the redhat network install disk/kernel
>- anyone know where I can find the config that redhat used for
>the 2.4.7-10BOOT kernel?
/usr/src/linux-2.4/configs
>- anyone know where I can find documentation on how to
Hello!
I am trying to hack together some new modules into the initrd.img
on the Redhat 7.2 network boot disks, which has the 2.4.7-10BOOT
kernel. This is a stock 7.2 system with no patches(yeah I know..),
I take the kernel source off the CD, change the makefile so the
signature is 2.4.7-10BOOT
> Well I thought of squid bcos of caching abilities,I am sure I would not want to
> tighten anything as all ports will have to be open and hence NAT is very good at
> that,as I have tried it on my small network (one Linux Box,with one winXP Cleint).
> The Idea of having three ne
. Weiss
> Sent: Tuesday, September 30, 2003 2:44 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Network Setup Opinion Needed
>
> > > This is not quite always the case. Ethernet's CSMA/CD (Carrier Sense
> > > Multiple Access with Collision Detection) was invented during
LAN small was a way to ensure network
> > performance.
> >
> > However, these days, switches are much cheaper and are easily within the
> > reach of most organizations.
> >
> > If your users are hooked up to a switch instead of a hub, you can ignore
> >
Hi
Well I thought of squid bcos of caching
abilities,I am sure I would not want to tighten anything as all ports will have
to be open and hence NAT is very good at that,as I have tried it on my small
network (one Linux Box,with one winXP Cleint).
The Idea of having three networks is to
]
Subject: Re: Network Setup Opinion
Needed
Thank you Ben/Bjorn for your responses,well the
truth is that I will be swtiching from a Windows Environment, to Linux,my
exising server is a PIII with 1GB of RAM.
All the 50 Nodes are connected thru three
Cisco 2500 Switches, so colission may as
Hi
Well Bjorn is talking about 50 Computers,which is
as well as 50 Users at any point of time, as this is an Internet
cafe.
Harish
- Original Message -
From:
Otto Haliburton
To: [EMAIL PROTECTED]
Sent: Tuesday, September 30, 2003 8:10
PM
Subject: RE: Network
if i am
wrong, I dont want complications as well.
Thanks
Harish
- Original Message -
From:
Enroth
Björn
To: [EMAIL PROTECTED]
Sent: Tuesday, September 30, 2003 8:00
PM
Subject: RE: Network Setup Opinion
Needed
Harish,
The Linux box is
absolutely
In all Bjorn is probably correct depending
on the traffic, but I think he is describing 50 users and not 50 computers, because
the problem occurs with the amount of traffic on the network, that is when the
collisions will occur.
-Original Message-
From: [EMAIL PROTECTED
Hy Harish,
1. Why NAT and Squid? You should use NAT OR
Squid. If you have say a internet cafe where the users will want to use every
software that needs every port you should use pure transparent NAT. On the other
hand if you want things a little more tightened you should use
Squid.
2. On
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Benjamin J. Weiss
> Sent: Tuesday, September 30, 2003 9:22 AM
> To: [EMAIL PROTECTED]
> Subject: RE: Network Setup Opinion Needed
>
> On Tue, 30 Sep 2003, Otto Haliburton
30 september 2003 10:34
To: [EMAIL PROTECTED]
Subject: Re: Network Setup Opinion
Needed
Hi Bjorn,
Thanks for ar
advice,but you think that it will be able to handle all the requests from 50
odd terminals effictively? Also any suggestion on the additional Host IPs that
I have been
the primary method of connection. Collision was indeed
a problem then, and keeping the LAN small was a way to ensure network
performance.
However, these days, switches are much cheaper and are easily within the
reach of most organizations.
If your users are hooked up to a switch inste
not solve the routing table problem.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
> On Behalf Of Paul Rushing
> Sent: Tuesday, September 30, 2003 8:04 AM
> To: [EMAIL PROTECTED]
> Subject: Re: Network Setup Opinion Needed
>
> >
> I have set up a Linux Box with NAT/MASQ, and Squid as an Internet server for my
> local LAN with one system on a trial basis and I see that the performance has been
> great.However I am apprehensive about the way the way traffice and loadbalancing
> will be hadled by Linux box as there wil
To: [EMAIL PROTECTED]
Sent: Tuesday, September 30, 2003 4:44
AM
Subject: RE: Network Setup Opinion
Needed
Remember that
Ethernet is a collision based system i.e. the more collisions the less
performance. Hence large networks are typically have low performance
because
Behalf Of Enroth Björn
Sent: Monday, September 29, 2003
5:47 PM
To: [EMAIL PROTECTED]
Subject: SV: Network Setup Opinion
Needed
Hi,
Why complicate things when not needed? The
only thing you can gain from separating the clients is less broadcast, and
maybe some increased security between
: Network Setup Opinion
Needed
Hi Ed,
Thank you for taking interest in my queries,I
need a suggestion from you on the way I should set up my network,I had posted
this mssg on the mailing list but had no response,hence I am mailing this to
you,your suggestion will be highly appreciated
Hi Ed,
Thank you for taking interest in my queries,I
need a suggestion from you on the way I should set up my network,I had posted
this mssg on the mailing list but had no response,hence I am mailing this to
you,your suggestion will be highly appreciated.
Hi All,I have set up a Linux Box
Hi All,
A big thanks to all of them on the RH network for
helping me in my day to day problems with Linux.I had succesfuly set up my Linux
box internet server with NAT/MASQ and used the default firewall2.4 script
thats there on the tldp.org site,everything is superb and all my
Hi All,
A big thanks to all of them on the RH network for
helping me in my day to day problems with Linux.I had succesfuly set up my Linux
box internet server with NAT/MASQ and used the default firewall2.4 script
thats there on the tldp.org site,everything is superb and all my
On Sat, 27 Sep 2003, Ray Creveling wrote:
>
> See Below For the resquested Info AS WELL AS
>
> The TEXT FROM LSPCI And the Error I get at boot up
>
> 1.)Contents of Modules.conf
>
> alias usb-controller usb-ohci
> alias usb-controller1 ehci-hcd
> alias eth0 CDC Ethernet Class
>
> 2.) the ou
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Keith Morse
Sent: Friday, September 26, 2003 11:18 AM
To: [EMAIL PROTECTED]
Subject: Re: CDC Network Error
On Thu, 25 Sep 2003, Ray Creveling wrote:
> I am trying to configure my on board network card
On Thu, 25 Sep 2003, Ray Creveling wrote:
> I am trying to configure my on board network card to use my broadband
> connection in Redhat 9. I am getting the following error
>
> Command Failed
> /sbin/modprobe cdc ethernet class
> Can't locate module CDC Ethernet clas
I am trying to configure my on board network card to use my broadband
connection in Redhat 9. I am getting the following error
Command Failed
/sbin/modprobe cdc ethernet class
Can't locate module CDC Ethernet class
I had a previous install of RH9 in the same system and had no
problems
On Tue, 2003-09-23 at 09:50, Sasa Stupar wrote:
> [EMAIL PROTECTED] pravi:
[about 200 lines deleted]
How about reading about proper quoting of emails. There were so much
lines, which we all can read in the thread, it has not to be send
everytime.
Perhaps this test: http://www.netmeister.org/n
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:31:41 CEST
Til: [EMAIL PROTECTED]
Emne: Re: Sv: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:17:50 CEST
Til: [EMA
>
> Fra: Sasa Stupar <[EMAIL PROTECTED]>
> Dato: 2003/09/22 Mon PM 12:31:41 CEST
> Til: [EMAIL PROTECTED]
> Emne: Re: Sv: Re: The network stops responding
>
> [EMAIL PROTECTED] pravi:
>
> >>Fra: Sasa Stupar <[EMAIL PROTECTED]>
> >>Dato: 200
>
> Fra: Sasa Stupar <[EMAIL PROTECTED]>
> Dato: 2003/09/22 Mon PM 12:31:41 CEST
> Til: [EMAIL PROTECTED]
> Emne: Re: Sv: Re: The network stops responding
>
> [EMAIL PROTECTED] pravi:
>
> >>Fra: Sasa Stupar <[EMAIL PROTECTED]>
> >>Dato: 200
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon PM 12:17:50 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 11:04:00 CEST
Til: [EMAIL PRO
>
> Fra: Sasa Stupar <[EMAIL PROTECTED]>
> Dato: 2003/09/22 Mon PM 12:17:50 CEST
> Til: [EMAIL PROTECTED]
> Emne: Re: The network stops responding
>
> [EMAIL PROTECTED] pravi:
>
> >>Fra: Sasa Stupar <[EMAIL PROTECTED]>
> >>Dato: 200
[EMAIL PROTECTED] pravi:
Fra: Sasa Stupar <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 11:04:00 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] pravi:
Fra: Edward Dekkers <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 09:39:43 CEST
Til: [EMA
>
> Fra: Sasa Stupar <[EMAIL PROTECTED]>
> Dato: 2003/09/22 Mon AM 11:04:00 CEST
> Til: [EMAIL PROTECTED]
> Emne: Re: The network stops responding
>
> [EMAIL PROTECTED] pravi:
>
> >>Fra: Edward Dekkers <[EMAIL PROTECTED]>
> >>Dato: 200
[EMAIL PROTECTED] pravi:
Fra: Edward Dekkers <[EMAIL PROTECTED]>
Dato: 2003/09/22 Mon AM 09:39:43 CEST
Til: [EMAIL PROTECTED]
Emne: Re: The network stops responding
[EMAIL PROTECTED] wrote:
Hi
I have a little problem with the NIC (I think) which consists of it stops responding fro
>
> Fra: Edward Dekkers <[EMAIL PROTECTED]>
> Dato: 2003/09/22 Mon AM 09:39:43 CEST
> Til: [EMAIL PROTECTED]
> Emne: Re: The network stops responding
>
> [EMAIL PROTECTED] wrote:
>
> > Hi
> >
> > I have a little problem with the NIC (I think)
[EMAIL PROTECTED] wrote:
Hi
I have a little problem with the NIC (I think) which consists of it stops responding from time to time. I've got RH9 with the latest Samba, Apache and Squid Proxy Server installed and sometimes it totally stops responding. At first I though it was the Proxy server tha
Hi
I have a little problem with the NIC (I think) which consists of it stops responding
from time to time. I've got RH9 with the latest Samba, Apache and Squid Proxy Server
installed and sometimes it totally stops responding. At first I though it was the
Proxy server that wasn't properly confi
On Du, 2003-09-21 at 18:14, Bob Hartung wrote:
>The problem is fixed. The reason: My wife who never
> touches "my" main w2k machine decided that with all the fuss
> over worms that she would install McAfee Firewall while I
> was out of town...
>Another lesson learned.
Never ever give t
HY can't I see the share in network neighborhood?
Just for the sake of asking, is the Win2k machine in the RWHHOME1
workgroup?
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTECTED]
https://www.redhat.com/mailman/listinfo/redhat-list
Bob Hartung wrote:
WHY can't I see the share in network neighborhood?
Just for the sake of asking, is the Win2k machine in the RWHHOME1 workgroup?
--
By-Tor.com
It's all about the Rush
http://www.by-tor.com
--
redhat-list mailing list
unsubscribe mailto:[EMAIL PROTEC
Help!
I have a simple home network. I have samba [2.2.7a]
running with the smb.conf file listed below. I can see this
machine in network neighborhood on a Win98 machine and a
WinNT 4.0 machine, but I cannot see this share from a Win2K
machine.
If I issue a net use command from the cmd
On Mon, 15 Sep 2003 17:50:22 -0700 (PDT)
truc nguyen <[EMAIL PROTECTED]> wrote:
> Now I want to create a network installation bootdisk
> to boot from the old computer and get boot.img from
> other computers through LAN.
>
> How do I create the network installation floppy ?
I have a old computer that its boot sequences are
floppy A and hard drive C. I also have other computers
with Red Hat 8.0 on the LAN.
Now I want to create a network installation bootdisk
to boot from the old computer and get boot.img from
other computers through LAN.
How do I create the network
On Sun, 14 Sep 2003, Robert Jones wrote:
> Y'all, this one is about to drive me to distraction. Without going into
> a long chronology, I recent got DSL and have been reconfiguring. I
> finally got around to pulling my 3c905tx NIC and installing an Intel
> dual-port card as a stepping stone to r
On Sun, Sep 14, 2003 at 04:23:08PM -0500, Robert Jones wrote:
> I thought it was /etc/sysconfig/network-scripts/ifcfg-* but there's
> something else at work here.
Do a locate 'ifcfg-', you probably have more than one config file.
--
Hal Burgiss
--
redhat-list mai
Thanks to those who replied. BTW, remind me to turn off the list digest
mode before asking another question.
My face is very red. Look what I found, except that the last line wasn't
commented:
[EMAIL PROTECTED] root]# cat /etc/rc.d/rc.local
#!/bin/sh
#
# This script will be executed *after* all t
Hello Robert,
> [EMAIL PROTECTED] root]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
> BOOTPROTO=none
No explanation, just a question. What happens if you change BOOTPROTO to
static for eth1?
Bye,
Leonard.
--
How clean is a war when you shoot around nukelar waste?
Stop the use of de
the
> > point. My question is this: When RH7.3 boots and brings up the eth*
> > interface(s), where do the interface parameters come from? Careful
> > before answering!
> > I thought it was /etc/sysconfig/network-scripts/ifcfg-* but there's
> > something else at
h*
> interface(s), where do the interface parameters come from? Careful
> before answering!
> I thought it was /etc/sysconfig/network-scripts/ifcfg-* but there's
> something else at work here.
Please run "rpm -qV net-tools" and reply with the output (if any). I
have a sne
thought it was /etc/sysconfig/network-scripts/ifcfg-* but there's
something else at work here.
Here is some output copied immediately after rebooting for the severalth
time this afternoon. There has been nothing snipped or added. Note that
eth0 is changed after the
Hi Folks!
I want to install some packages from the network. I know the network path
But the problem is that whenever i am opening the package manager and
after clicking the update option it is asking me to insert the required
CDs. And it is a very horrible idea to search the required rpm from a
Hi All,
Hopefully you guys can be of assistance.
I have a Linksys wireless USB adater which I downloaded the drivers for
here http://www.linksys.com/download/driver.asp?dlid=51&osid=7
I have read the readme file which comes with it, which brings me to my
question..
This is a fresh install with
At 11:01 9/4/2003 -1000, you wrote:
> An Epson printer is connected to that host computer,
How? Parallel or USB? Configured how? LPD or CUPS? Give details.
> I tried to set it up as a remote printer on another computer.
How? Details!
> Also, what are the actual configuration files
> involved in t
* Marc Adler <[EMAIL PROTECTED]> [2003-09-01 17:11]:
> I've setup a LAN with one computer set up as a file server using NFS and
> it works fine. An Epson printer is connected to that host computer, and
> I tried to set it up as a remote printer on another computer. However,
> on the "Queue type" ta
I've setup a LAN with one computer set up as a file server using NFS and
it works fine. An Epson printer is connected to that host computer, and
I tried to set it up as a remote printer on another computer. However,
on the "Queue type" tab in printconf-gui the Path: line reads
/printers/queue1, whi
fred smith pravi:
On Mon, Sep 01, 2003 at 09:29:35AM -0500, Robert C. Paulsen Jr. wrote:
On Mon, Sep 01, 2003 at 04:11:02PM +0200, Sasa Stupar wrote:
Hi!
I have setup a server (RH8) with Samba for printer share. With windows
machines I can access printer and print without any problem.
Bu
On Mon, Sep 01, 2003 at 09:29:35AM -0500, Robert C. Paulsen Jr. wrote:
> On Mon, Sep 01, 2003 at 04:11:02PM +0200, Sasa Stupar wrote:
> > Hi!
> >
> > I have setup a server (RH8) with Samba for printer share. With windows
> > machines I can access printer and print without any problem.
> > But fro
On Mon, Sep 01, 2003 at 04:11:02PM +0200, Sasa Stupar wrote:
> Hi!
>
> I have setup a server (RH8) with Samba for printer share. With windows
> machines I can access printer and print without any problem.
> But from the linux clients (all are RH8) I can't print nothing. I have
> set up a printer
Hi!
I have setup a server (RH8) with Samba for printer share. With windows
machines I can access printer and print without any problem.
But from the linux clients (all are RH8) I can't print nothing. I have
set up a printer thru gnome and choose UNIX printer (not local).
Did I make some configur
On 24 Aug 2003 18:26:32 -0400
Jason Dixon <[EMAIL PROTECTED]> wrote:
Hi again Jason,
> On Sun, 2003-08-24 at 18:23, Sean Estabrooks wrote:
> > On 24 Aug 2003 18:06:43 -0400
> > Jason Dixon <[EMAIL PROTECTED]> wrote:
> >
> >
> > > > default 0.0.0.0 UG0 0
> > >
On Sun, 2003-08-24 at 18:23, Sean Estabrooks wrote:
> On 24 Aug 2003 18:06:43 -0400
> Jason Dixon <[EMAIL PROTECTED]> wrote:
>
>
> > > default 0.0.0.0 UG0 0
> > > 0 eth0
> > >
> > Therein lies the problem. You've setup your routing so that when the
> > VPN c
On 24 Aug 2003 18:06:43 -0400
Jason Dixon <[EMAIL PROTECTED]> wrote:
> > default 0.0.0.0 UG0 0
> > 0 eth0
> >
> Therein lies the problem. You've setup your routing so that when the
> VPN connection is active, all traffic is routed through the VPN, even
Jaso
On Sun, 24 Aug 2003 16:45:25 -0500
"Jay Mallar" <[EMAIL PROTECTED]> wrote:
Hi Jay,
> I use 192.168.0.10 to connect via VPN to my office. When I do so, the VPN software
> automatically excludes my local intranet traffic, so 192.168.0.10 can no longer see
> my inter
On Sun, 2003-08-24 at 17:45, Jay Mallar wrote:
> I have a networking issue I need some help with.
>
> I use 192.168.0.10 to connect via VPN to my office. When I do so, the
> VPN software automatically excludes my local intranet traffic, so
> 192.168.0.10 can no longer see my i
I have a networking issue I need some help
with. I have a local intranet using 192.168.0.X addressing,
currently with 9 IPs assigned. Everyone on the network can see everyone
else perfectly. 192.168.0.1 is my gateway, which happens to be my external
router/firewall box, and is connected
since it is beta it is normal to have problems with the system you
can report the problem to the bugzilla or check bug reports if any
report has been made for this kind of problem
--
Nurullah Akkaya
[EMAIL PROTECTED]
Registered Linux User #301438
What lies behind us and what lies before us
Hi, is
anyone out there using the new Red Hat Beta Severn? My network no longer
works since installing it.
In the previous version 9.0 my network worked flawlessly (indeed it worked
'out of the box', as it were). My network card is a Realtek RTL8139 card
(modules 8139too and mi
> ok now i'm thinking of NetGEAR MA101 which looks
> fine
>
> any happy user here ?
Yes, I have been using NetGear Products (i.e., AP and
fast ethernet switch) for my wireless applications. So
far so good.
__
Do You Yahoo!?
Stand a chance to win ca
>> I'm looking for wireless network adapters (802.11b), both pcmcia cards and
>> usb devices
>> I wish they to work with most OSes, windows, mac and LINUX (of course)
>Your best bet is to compile a list of preferred make/models that you
>like, then Google for some
On Wednesday 20 August 2003 11:23 pm, Jason Dixon wrote:
> > Does anybody know if the Linksys WUSB12 Ethernet device is yet supported?
>
> According to the following, the Linksys WUSB12 is supported by the
> wlan-ng drivers:
>
> http://www.linux-wlan.org/docs/wlan_adapters.html5.html
I can't get t
1 - 100 of 2037 matches
Mail list logo
