On Thu, 4 Nov 1999, Piet Barber wrote:
->To get to your question about the Mount Tool: You need an entry for
->this in the /etc/fstab.
->
->In the old, efficient days of Unix/Linux, you would edit the
->/etc/fstab (or /etc/vfstab in Slowlaris land) by hand.
->
->There's an ability to do this in
> >type 'insmod parport; insmod ppa' and repeat the mount command, and tell
> >me if that works.
>
> This worked and I could access the drive.
Good!
> Thanks for your help. Is there some way to set it up so that parport and ppa
> load when I boot up so that I don't have to go through this every
On Thu, 04 Nov 1999 12:28:04 -0500, Piet Barber wrote:
>be[come] root.
>
>[root@slacker root]# mkdir /mnt/zip
>
>[root@slacker root]# mount /dev/sda4 -t vfat /mnt/zip
>
>The /mnt/zip directory should now have stuff in it, the contents of your
>zip drive.
>
This did not work.
>
>If it doesn't, t
> I went to the Zip Drive HOWTO and tried following the directions to
> configure the kernel
> and typed:
>
> make xconfig
>
> only to be told:
>
> bash: make: command not found
Unless you've already been mucking around with the kernel, you probably
won't have to re-compile the ke
I have an Iomega Zip100 parallel port drive that I want to be able
to use with RH 6.0 but cannot seem to get to work. I tried using
the installation update to add a SCSI device and highlighted the
entry for the drive but I get a message back saying that no device
was found (it works fine under OS/
