I untar the downloaded file to upgrade Netscape.
I got the files in the Netscape-installer folder.
Now I am lost in the instruction:
If I double click the netscape-installer icon then it would run the
installation. I am not getting anything
The instruction is run script: ./netscape-installer - ho
He said he wanted to forward to those internal IP's. In order to do
that, the hostname has to resolve to an IP on his gateway server. If
all of the names resolve to the same IP, it can't work.
If he could add additional IP addresses to the server, he could forward
that traffic internally, but t
ups? :) sorry 'bout that, i was using netscape 6.2.2
and i don't have any copy of 4.79. :(
cheers,
lh
--- clover <[EMAIL PROTECTED]> wrote:
> thank you for the quick reply.
>
> with the netscape 4.79 that im using i did not find
> anything under advanced about the wheel mouse. just
> stuff ab
two places -
at a command prompt, type in "free -m"
which will give you a short table of recognized and used/free memory
at a command prompt, type in "dmesg"
which will scroll the startup messages - near the top should be a listing of memory
found.
HTH
s.
=
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 10 Jul 2002 11:00:17 +0600, [EMAIL PROTECTED] wrote:
> and I tried intel 845GN P4 mother board with Redhat 7.3 and failed.
>It seems RH7.3 doesn't support P4 ?
>
>
>
>
>
>regards,
>Sajeewa Chandrasekera
"It seems RH7.3 doesn't suppor
Hi
Is there a place, in Red Hat, where I can see how much RAM memory is
installed on my machine?
If you could help me, thanks a lot!
Gustavo
_
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/s
On Wed, Jul 10, 2002 at 11:00:17AM +0600, Sajeewa Chandrasekera wrote:
>
> and I tried intel 845GN P4 mother board with Redhat 7.3 and failed.
> It seems RH7.3 doesn't support P4 ?
Nope. I am using an Intel D845WN P4 1.6Ghz since RH7.2 (now on 7.3), and
haven't found any problems. Runs like
From: John Telford [mailto:[EMAIL PROTECTED]]
>I'm building routers. It's difficult to tell in advance which NIC will
>be assigned eth0 and which will assigned eth1 when using two NICs. Ping
>testing usually clears up this simple problem.
>My question is, what's the algorithm for assigning Et
and I tried intel 845GN P4 mother board with Redhat 7.3 and failed.
It seems RH7.3 doesn't support P4 ?
regards,
Sajeewa Chandrasekera
Thomas Kiblin
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 09 July 2002 11:29 pm, Darryl Harvey wrote:
> At 12:34 AM 10/07/2002, you wrote:
> >On Tue, Jul 09, 2002 at 11:47:25PM +1000, Darryl Harvey wrote:
> > > modprobe: Can't locate module char-major-10-134
> > > modprobe: Can't locate module
Hi all,
I'm sure this has been asked many times, but I can live with that. ;-)
I am looking for recommendations for 3D accelerator cards for use under
7.2. I have checked the RedHat HCL but there is not a lot out there for
either Maxtor or Diamond Viper cards.
Any information is appreci
At 12:34 AM 10/07/2002, you wrote:
>On Tue, Jul 09, 2002 at 11:47:25PM +1000, Darryl Harvey wrote:
> >
> > modprobe: Can't locate module char-major-10-134
> > modprobe: Can't locate module char-major-81
> >
> > What are they and how do I fix this?
>
>/usr/src/linux/Documentation/devices.txt sa
great, that fixed the error message for char-major-81
but I cannot fix the other..
Thanks again
Darryl
At 11:40 AM 10/07/2002, you wrote:
>-BEGIN PGP SIGNED MESSAGE-
>Hash: SHA1
>
>On Tuesday 09 July 2002 10:34 am, Emmanuel Seyman wrote:
> > On Tue, Jul 09, 2002 at 11:47:25PM +1000, D
thank you for the quick reply.
with the netscape 4.79 that im using i did not find
anything under advanced about the wheel mouse. just
stuff about java cache and proxies.
do people still use imwheel?? that's what i used to use
and i would not have a problem using it again.
TIA
eric
loophole
hi,
anyone know of any software or script that can
synchronize user accounts from one machine to another
cluster member? I have two clustered servers and when
I add a user account to one machine, I had to do it on
the other one.
thnx,
lh
=
---
||
hi,
in netscape go to Edit > Preferences > Advanced >
Mouse Wheel.
There are options there that affects your wheel mouse.
cheers,
lh
--- clover <[EMAIL PROTECTED]> wrote:
> my wheel mouse works in everything but netscape.
> it is a mouseman plus. i have the axis mapping
> in the xf86conf and
hi,
look under /etc/ssh/, the config files that you need
to tweak are there. Also, use '/etc/hosts.deny' and
'/etc/hosts.allow'.
cheers,
lh
--- clover <[EMAIL PROTECTED]> wrote:
> hello,
> on my old system 6.2 i was running ssh2 2.0.13.
> it had an ssh2d_config where i could allow what ip's
>
On 07/08/02, at 10:42 PM, "Anthony E. Greene" <[EMAIL PROTECTED]> said:
>Try moving or deleting the old data files under $PGHOME/data/base. When you
>start PostgreSQL it should recreate the template database.
When I tried to start postgres after doing that, it gave me the 'old version
detected.
hello,
on my old system 6.2 i was running ssh2 2.0.13.
it had an ssh2d_config where i could allow what ip's
i wanted to let in. on the new 7.3 all i see is ssh.
is it openssh or just ssh? and where can i specify
what ip's to allow?
thank you
eric
_
my wheel mouse works in everything but netscape.
it is a mouseman plus. i have the axis mapping
in the xf86conf and with the other things it works.
what am i missing??
thank you
eric
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.r
On Tue, Jul 09, 2002 at 05:24:52PM -0700, David Talkington wrote:
> Michael George wrote:
>
> >I suspect that the SCSI generic driver needs to be loaded, as it is not.
> >However, when I try to load it manually with "modprobe sg", I get an error
> >about "scsi_reset_provider" being an unresolved
On Wed, Jul 10, 2002 at 02:45:44AM +0200, Emmanuel Seyman wrote:
> On Tue, Jul 09, 2002 at 08:16:10PM -0400, Michael George wrote:
> >
> > I suspect that the SCSI generic driver needs to be loaded, as it is not.
> > However, when I try to load it manually with "modprobe sg", I get an error
> > ab
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 09 July 2002 10:34 am, Emmanuel Seyman wrote:
> On Tue, Jul 09, 2002 at 11:47:25PM +1000, Darryl Harvey wrote:
> > modprobe: Can't locate module char-major-10-134
> > modprobe: Can't locate module char-major-81
> >
> > What are they and
On Tue, 9 Jul 2002, Jason Costomiris wrote:
> On Tue, Jul 09, 2002 at 01:52:15PM -0700, John Telford wrote:
> : I'm building routers. It's difficult to tell in advance which NIC will
> : be assigned eth0 and which will assigned eth1 when using two NICs. Ping
> : testing usually clears up this s
Hi all, a while back when I had windows on my first HD and RH on the
second HD, I had Gtv that was installed by default.
Well I removed windows from hda and put RH 7.3 on it, now I cannot find
Gtv, nor can I find it on the CD's.
anyone know whats happening here?
Thanks
--
David M.
Edificatio
On Tue, Jul 09, 2002 at 08:16:10PM -0400, Michael George wrote:
>
> I suspect that the SCSI generic driver needs to be loaded, as it is not.
> However, when I try to load it manually with "modprobe sg", I get an error
> about "scsi_reset_provider" being an unresolved symbol.
FWIW, here's the rel
when i try to get on irc with my new 7.3 system
the ident is wrong. it shows up as [EMAIL PROTECTED]
and not what it needs to be. when i turn off identd
it shows up right but it is not sending an ident reply.
this worked right on my old 6.2 system.
is there something i need to configure?
TIA
er
Cameron,
This is a fairly large program, and it breaks not always in the
same place with gdb, but it is always around an fopen/fclose call.
At the bottom I'm enclosing a couple of files that I've seen getting
stuck (e.g. line 412 of "macro.c" and line 13 of dtrim.c). Needless
to say, I've checke
Please Unsubscribe me form the mailing list. I did
it through web site but I still receive all of the the things daily, so please
be nice and stop it for a while.
Thanks again for your
help!
If are only in text mode:
edit ~/.bashrc
And add this line:
setleds +num
If you are using KDE, run kcontrol and go to
Peripherals> Keyboard>Advanced
You can set the Numlock option there.
Not too sure how to do this in gnome.
cheers,
--- "Yohann DESQUERRE (DSI NOISIEL)"
<[EMAIL PROTECTED]>
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Michael George wrote:
>I suspect that the SCSI generic driver needs to be loaded, as it is not.
>However, when I try to load it manually with "modprobe sg", I get an error
>about "scsi_reset_provider" being an unresolved symbol.
>
>I am presuming I m
For many people, running routed is not necessary. Many times, all one needs is
a static default route. For example, 192.168.1.0/24 is via eth1 and
everything else on the planet is via eth0. In any case, you might want to get
things working with static routes before debugging routed.
Ensure b
I just built a 2.4.18 kernel on my otherwise 7.2 system and I'm having trouble
with my cd burner.
Running xcdroast I get the errow message that the SCSI bus couldn't be
scanned. I have SCSI emulation on (ide-scsi is loaded, as is sd_mod) and my
cd burner is accessible as /dev/scd1.
Running "cdr
On 11:23 09 Jul 2002, Jay Daniels <[EMAIL PROTECTED]> wrote:
| Now that I have mutt working with imap I still can't use it because I
| receive mail from different address which end up in this mailbox. [...]
Please ask in the comp.mail.mutt newsgroup, or on the mutt-users
mailing list. You'll get
Adrian Hunt <[EMAIL PROTECTED]> writes:
> Without even addressing the firewall aspect at this
> point, I'm simply trying to take one machine with 2
> network interfaces (192.168.1.1 and 192.168.2.1) and
> convince it to route IP traffice such that 192.168.2.X
> can ping, telnet to, print to, etc.
On 15:32 09 Jul 2002, Daniel Senderowicz <[EMAIL PROTECTED]> wrote:
| I'm new to linux and this list, so please bear with me if this
| problem was already posted before.
| I compiled a program that opens a few files with fopen and fclose.
| When I run it it gives some segmentation faults. Accordi
At 12:34 AM 10/07/2002, you wrote:
>On Tue, Jul 09, 2002 at 11:47:25PM +1000, Darryl Harvey wrote:
> >
> > modprobe: Can't locate module char-major-10-134
> > modprobe: Can't locate module char-major-81
> >
> > What are they and how do I fix this?
>
>/usr/src/linux/Documentation/devices.txt sa
There is no standard way to uninstall software installed via make. You have to
look at the makefile. There may be a make target the removes the software. If
not, you could do a 'make install' again and save the output to a file so you
can figure out what needs to be removed.
cheers,
Mike
O
Hi,
I'm new to linux and this list, so please bear with me if this
problem was already posted before.
I compiled a program that opens a few files with fopen and fclose.
When I run it it gives some segmentation faults. According to gdb,
the problem appears when fopen/fclose in turn call some mal
On Tue, Jul 09, 2002 at 01:52:15PM -0700, John Telford wrote:
: I'm building routers. It's difficult to tell in advance which NIC will
: be assigned eth0 and which will assigned eth1 when using two NICs. Ping
: testing usually clears up this simple problem.
It's largely voodoo that probably onl
Okay I know how to uninstall an rpm package - 'rpm -q '
How do I uninstall a program that is installed with - 'make install' ?
'make uninstall' - doesn't work.
Thank you,
Norm
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat
Hi all,
I've read a few TFM's ;-) but can't seem to figure it
out on my own. I have a very simple routing need, for
the time being, and yet I can't seem to figure it out.
Without even addressing the firewall aspect at this
point, I'm simply trying to take one machine with 2
network interfaces (
On Tue, 2002-07-09 at 12:50, Jim Crippen wrote:
> Hi all,
> I'm having a bit of difficulty getting new newest server set up and
> was wondering if this issues has arisen before. I have the Tyan S2720 Dual
> P4 Xeon board with 2x2.0GHz P4 Xeons, 4GB DDR2100 Memory and a Promise
> SX6000 IDE
On Tue, Jul 09, 2002 at 04:54:32PM -0400, Anthony Abby wrote:
> Could you not add eth0 first... then add eth1 after you finish configuring
> the first NIC? That way there'd be no confusion which was which.
>
> Anthony
A part of the problem is the Ethernet designation for a NIC, such as
eth0 or
Can anyone recommend a motherboard/p4 chipset that is supported and works
under RH 7.3?
I have a few ASUS 845G chipset P4 mobo's that are not yet fully supported
in terms of the IDE and PCI interfaces, some minor problems.
But I am in urgent need of a few p4 systems, hopefully that support DDR
On Tue, 9 Jul 2002, Anthony Abby wrote:
> Could you not add eth0 first... then add eth1 after you finish configuring
> the first NIC? That way there'd be no confusion which was which.
It doesn't work that way, especially when you have multiple, identical
NICs.
In the boxes I've had with multi
On 9 Jul 2002, Samuel Flory wrote:
> http://rhn.redhat.com/errata/RHSA-2002-105.html
>
This is dated 2002-06-04, way before the CERT advisory.
CERT lists those things affected as libbind and BSD libc. Redhat uses GNU
libc and no libbind that I know of.
I'm assuming this is a non-issue OR Red
Could you not add eth0 first... then add eth1 after you finish configuring
the first NIC? That way there'd be no confusion which was which.
Anthony
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of John Telford
> Sent: Tuesday, July 09, 2002 4:52 PM
I'm building routers. It's difficult to tell in advance which NIC will
be assigned eth0 and which will assigned eth1 when using two NICs. Ping
testing usually clears up this simple problem.
The identification problem gets worse when adding a third NIC, after
sorting out the first two NICs. Fre
ipchains -L , will tell you the current rules, if it's empty then it isn't active and
yeah logging them in /var/log/messages and then probably tail -f | grepping the
firewall logs parameters and redirecting it to another file, and then another shell
script who keeps watching that output file, i
On Tue, Jul 09, 2002 at 02:50:12PM -0500, Jim Crippen wrote:
> Hi all,
> I'm having a bit of difficulty getting new newest server set up and
> was wondering if this issues has arisen before. I have the Tyan S2720 Dual
> P4 Xeon board with 2x2.0GHz P4 Xeons, 4GB DDR2100 Memory and a Promise
> Hi all,
> I'm having a bit of difficulty getting new newest server set up and
> was wondering if this issues has arisen before. I have the Tyan S2720 Dual
> P4 Xeon board with 2x2.0GHz P4 Xeons, 4GB DDR2100 Memory and a Promise
> SX6000 IDE Raid controller. I am unable to get the system
Hi all,
I'm having a bit of difficulty getting new newest server set up and
was wondering if this issues has arisen before. I have the Tyan S2720 Dual
P4 Xeon board with 2x2.0GHz P4 Xeons, 4GB DDR2100 Memory and a Promise
SX6000 IDE Raid controller. I am unable to get the system to boot
Going from 7.2 to 7.3 I noted that that was removed for some reason. I
have, however, been able to install 7.3 and Limbo with the WPC11 card
working right after install. WEP is still not working as far as I know.
Shaun
-Original Message-
From: Clarence Donath [mailto:[EMAIL PROTECTED]]
We use them in everything. We use laptops though and the driver loads
automatically when PCMCIA starts. We haven't had to configure it on 15
different machines now.
Jon
On Tue, 9 Jul 2002, Clarence Donath wrote:
> I have a problem trying to set up a wireless Linksys WPC11 ver 3.0 card.
> Ac
I have a problem trying to set up a wireless Linksys WPC11 ver 3.0 card.
According to their web site
http://www.redhat.com/docs/manuals/linux/RHL-7.3-Manual/custom-guide/s1-network-config-wireless.html
I should be able to point and click my way through this. However, there is
no 'Wireless' entry
Thanks. I overlooked this RPM because of the date. It seems to take
care of vulnerabilities in the name server itself, but are there
applications that have been compiled with vulnerable versions of the DNS
resolver libraries? I insert below an excerpt from the ISC web page:
NOTE: Upgrading th
http://rhn.redhat.com/errata/RHSA-2002-105.html
On Tue, 2002-07-09 at 10:49, [EMAIL PROTECTED] wrote:
> On June 28 CERT released an advisory (CA-2002-19) citing a buffer
> overflow problem in applications that are compiled with DNS resolver
> libraries from ISC BIND (libbind) and BSD (libc). Bec
On June 28 CERT released an advisory (CA-2002-19) citing a buffer
overflow problem in applications that are compiled with DNS resolver
libraries from ISC BIND (libbind) and BSD (libc). Because of this
vulnerability and others, ISC strongly recommends that BIND be upgraded
to Version 9.2.1.
I am
On Tue, 2002-07-09 at 13:05, Prashant Patel wrote:
> please unsubscibe this email id: [EMAIL PROTECTED]
> from your email listing..
>
> Prashant
>
Do it yourself. See below every message where it gives you all the
mailing list options? See the url
"https://listman.redhat.com/mailman/listin
please unsubscibe this email id: [EMAIL PROTECTED]
from your email listing..
Prashant
_
Chat with friends online, try MSN Messenger: http://messenger.msn.com
___
Redhat-list mailing
i dont know man i also dont have any clue on that i tried everything but
didnt clcik...can any one let me know.
Pete
>From: [EMAIL PROTECTED]
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Redhat list doubles
>Date: Tue, 9 Jul 2002 01:48:26 EDT
>
>Hi,
>
>I am also gettin
all this taken from rpm -qip kernel-[enterprise|smp|up|BOOT]
On Mon, 2002-07-08 at 23:59, Gustavo Facchini wrote:
> Hi, I installed Red Hat 7.2
> In my LILO, there are 3 or 4 options:
>
> 2.4.7-10enterprise
This package includes a kernel that has appropriate configuration
options
enabled for t
looks like you are missing the openssl-devel package
On Tue, 2002-07-09 at 03:55, bindal wrote:
> hi,
>
> when i try to install Cyrus imap server and execute the following
> commnad , i get the error in subject line. any clues ??
>
> make all CFLAGS=-0 ( zero or capital O ?? )
>
> Has anyone
On Tue, Jul 09, 2002 at 11:52:57AM -0400 or thereabouts, Jay Daniels wrote:
> On Tue, 2002-07-09 at 11:33, Hal Burgiss wrote:
> > On Tue, Jul 09, 2002 at 11:23:23AM -0400, Jay Daniels wrote:
> > >
> > > Now that I have mutt working with imap I still can't use it because
> > > I receive mail from
On Tue, Jul 09, 2002 at 11:52:57AM -0400, Jay Daniels wrote:
> Then aliases is not what I thought it was. I wanted aliases for
> From: in which I could choose what goes in the From field. mutt
> never prompts me for the From address, but only for the subject and
> to field.
AFAIK, there is no
On Tue, 2002-07-09 at 11:33, Hal Burgiss wrote:
> On Tue, Jul 09, 2002 at 11:23:23AM -0400, Jay Daniels wrote:
> >
> > Now that I have mutt working with imap I still can't use it because
> > I receive mail from different address which end up in this mailbox.
> > So how do you do aliases in mutt?
On Tue, Jul 09, 2002 at 11:23:23AM -0400, Jay Daniels wrote:
>
> Now that I have mutt working with imap I still can't use it because
> I receive mail from different address which end up in this mailbox.
> So how do you do aliases in mutt? I created an aliases file but
> when I use emacs as my ed
Now that I have mutt working with imap I still can't use it because I
receive mail from different address which end up in this mailbox. So
how do you do aliases in mutt? I created an aliases file but when I use
emacs as my editor I have no option to pick which alias to put in my
>From address w
At 10:28 09/07/2002 -0400, you wrote:
>On Tue, 2002-07-09 at 10:27, Shaw, Marco wrote:
> > We use HP ITO/VPO at work. I'm trying to figure out how we can monitor
> ipchains, and make sure it's running. I see nothing shows up in ps
> related to ipchains, probably since it runs as a kernel modul
On Tue, Jul 09, 2002 at 11:47:25PM +1000, Darryl Harvey wrote:
>
> modprobe: Can't locate module char-major-10-134
> modprobe: Can't locate module char-major-81
>
> What are they and how do I fix this?
/usr/src/linux/Documentation/devices.txt says:
char-major-10-134 matches /dev/apm_bios
c
On Tue, 2002-07-09 at 10:27, Shaw, Marco wrote:
> We use HP ITO/VPO at work. I'm trying to figure out how we can monitor ipchains,
>and make sure it's running. I see nothing shows up in ps related to ipchains,
>probably since it runs as a kernel module.
>
> Any ideas on how we can monitor ipc
On Tue, Jul 09, 2002 at 11:17:37AM -0300, Shaw, Marco wrote:
> Anyone know where I can find tcpdchk for RedHat 7.2 (from
> tcp_wrappers)? The RedHat RPM files don't seem to contain it.
>
> I'll at least ask here before I try to compile one.
It was not included because it does not work with xine
Anyone know where I can find tcpdchk for RedHat 7.2 (from tcp_wrappers)? The RedHat
RPM files don't seem to contain it.
I'll at least ask here before I try to compile one.
Marco
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat
We use HP ITO/VPO at work. I'm trying to figure out how we can monitor ipchains, and
make sure it's running. I see nothing shows up in ps related to ipchains, probably
since it runs as a kernel module.
Any ideas on how we can monitor ipchains or even iptables with a corporate management
tool
On Tue, 2002-07-09 at 03:51, ABrady wrote:
> On Tue, 09 Jul 2002 02:16:26 -0600
> "Ashley M. Kirchner" <[EMAIL PROTECTED]> wrote:
>
> >
> > I just loaded Red Hat 7.3 RPM updates on a 7.2 release system.
> > Specifically, glibc-*-2.2.5-36 RPMs were loaded (upgraded) on the
> > system
After ending a KDE login, I get this message in my /var/log/messages file:
modprobe: Can't locate module char-major-10-134
modprobe: Can't locate module char-major-81
What are they and how do I fix this?
TI Darryl
___
Redhat-list mailing list
hi !
I work in a Sun Cobalt RaqXTR server, Apache 1.3, php 4.2
I made a php script to download files using ftp functions ...
when I just do php -q myscript.php I have this error message :
Call to undefined function: ftp_connect()
Can you help me please ?
thanks
ps: I have --enable-ftp in the
Respected sir,
i (rambabu)working as a service engg at
University College of Engineering,Osmania University.
hyderabad.i have one problem to load Redhat linux on that machine
because in that cdrom drive support is not there.only boot
sequence is from floppy or from Hard Disk only.
Sorry I've been busy getting married this weekend, so as you can imagine
my mind has been on other things.
I'll have a look through the answers and see what I come up with. All I
can say is that I was able to send email outside of the local domain
when I had RH7.2 installed. It is since I have in
hi,
when i try to install Cyrus imap server and execute the following
commnad , i get the error in subject line. any clues ??
make all CFLAGS=-0 ( zero or capital O ?? )
Has anyone successfully installed the cyrus IMAP server on RH 7.2 and
then has implemented the shared folders for public us
Hi Yohann,
On Tuesday 09 Jul 2002 11:11 am, Yohann DESQUERRE (DSI NOISIEL) wrote:
> Hello
>
> I use RH7.3 and i'd like to lock the numlock key at the boot of the
> system
>
> Anyone can help me ?
For console mode (runlevel 3) there's the numlock service. Look at 'man
chkconfig' to find out
Hi,
> I use RH7.3 and i'd like to lock the numlock key at the boot of the
> system
for the "black screen":
setleds +num
for the KDE:
Kde Control Center > Peripherals > Keyboard > Advanced
---
Caner
___
Redhat-list mailing list
[EMAIL P
On Tue, 9 Jul 2002, Yohann DESQUERRE (DSI NOISIEL) wrote:
> Hello
>
> I use RH7.3 and i'd like to lock the numlock key at the boot of the
> system
That's a bios setting.
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mai
Hello
I use RH7.3 and i'd like to lock the
numlock key at the boot of the system
Anyone can help me ?
Hello
I use RH7.3 and i'd like to lock the numlock key at the boot of the
system
Anyone can help me ?
___
Redhat-list mailing list
[EMAIL PROTECTED]
https://listman.redhat.com/mailman/listinfo/redhat-list
hello.
On Tue, 9 Jul 2002 14:28:17 +0800, [EMAIL PROTECTED] wrote:
>goodbye !
Communicate in total privacy.
Get your free encrypted email at https://www.hushmail.com/?l=2
Looking for a good deal on a domain name?
http://www.hush.com/partners/offers.cgi?id=domainpeople
On Tue, 09 Jul 2002 02:16:26 -0600
"Ashley M. Kirchner" <[EMAIL PROTECTED]> wrote:
>
> I just loaded Red Hat 7.3 RPM updates on a 7.2 release system.
> Specifically, glibc-*-2.2.5-36 RPMs were loaded (upgraded) on the
> system. Should I expect horrible things now? Did I just screw
On Tue, Jul 09, 2002 at 03:59:07AM -0300, Gustavo Facchini wrote:
>
> 2.4.7-10enterprise
enterprise is a kernel that can handle large amount of memory,
very big files and the like. It's used on very big servers.
> 2.4.7-10smp
smp is for machines with more than one CPU.
> 2.4.7-10up
machines
I just loaded Red Hat 7.3 RPM updates on a 7.2 release system. Specifically,
glibc-*-2.2.5-36 RPMs were loaded (upgraded) on the system. Should I expect horrible
things now? Did I just screw myself into yet another long week and weekend ahead?
--
H | "Life is the art of drawing without
On Tue, Jul 09, 2002 at 01:48:26AM -0400, [EMAIL PROTECTED] wrote:
>
> I am also getting duplicate emails and currently trying to get off of the
> list (twice by putting "unsubscribe" in the subject area) but have not had
> any luck in being removed. Currently, I am trying to go through 532 me
Anthony E. Greene wrote:
20020708214301.C22730@cp5340">-BEGIN PGP SIGNED MESSAGE-Hash: SHA1On 08-Jul-2002/20:41 +0500, Petri Somerkar <[EMAIL PROTECTED]> wrote:
I have a file that has an extension .bin and I can execute it. By just typing its name. I have changend permissions of that
signal 11s are hardware related. Is your machine as
old as your Cd-ROM drive? :)
lh
--- Hong Hsu <[EMAIL PROTECTED]> wrote:
> Because I have old cdrom (6 year old) drive which
> can not be set up in
> the BIOS for visiting before hard drive, I tried to
> use boot floppy to
> start first. Ho
ModDAV does not do any internal authentication. Look into the documentation
on securing locations with apache.
There are a couple of good examples out there just look on google ... an
example I used was on www.apacheweek.com:
http://www.apacheweek.com/features/userauth
> -Original Message---
94 matches
Mail list logo
