在 2019/2/1 下午11:34, Markus Armbruster 写道:
Dave, I tried to review the error paths, in particular resource cleanup,
but there's a lot going on, and I'm not feeling confident. Please have
a close look.
Fei Li writes:
From: Fei Li
Update qemu_thread_create()'s callers by
- setting an error
On Fri, Feb 01, 2019 at 12:36:20PM +, Dr. David Alan Gilbert wrote:
> * Yuval Shaia (yuval.sh...@oracle.com) wrote:
> > Utilize error_report for all pr_err calls and some pr_dbg that are
> > considered as errors.
> > For the remaining pr_dbg calls, the important ones were replaced by
> > trace
在 2019/2/1 下午9:04, Markus Armbruster 写道:
Fei Li writes:
From: Fei Li
Utilize the existed errp to propagate the error and do the
corresponding cleanup to replace the temporary &error_abort.
Cc: Markus Armbruster
Cc: Gerd Hoffmann
Signed-off-by: Fei Li
---
hw/usb/ccid-card-emulated.c |
On Fri, Feb 01, 2019 at 11:42:57AM +, Dr. David Alan Gilbert wrote:
> * Markus Armbruster (arm...@redhat.com) wrote:
> > Eric Blake writes:
> >
> > > On 1/31/19 2:08 PM, Yuval Shaia wrote:
> > >> On Thu, Jan 31, 2019 at 07:17:16AM -0600, Eric Blake wrote:
> > >>> On 1/31/19 7:08 AM, Yuval Sha
On Fri, Feb 01, 2019 at 08:33:44AM +0100, Markus Armbruster wrote:
> Eric Blake writes:
>
> > On 1/31/19 2:08 PM, Yuval Shaia wrote:
> >> On Thu, Jan 31, 2019 at 07:17:16AM -0600, Eric Blake wrote:
> >>> On 1/31/19 7:08 AM, Yuval Shaia wrote:
> Signed-off-by: Yuval Shaia
> ---
>
Public bug reported:
I use iscsi protocol to drive-backup:
---iscsi target---
yum -y install targetcli python-rtslib
systemctl start target
systemctl enable target
targetcli /iscsi create iqn.2019-01.com.iaas
targetcli /iscsi/iqn.2019-01.com.iaas/tpg1 set attribute authentication=0
demo_mode_wri
** Description changed:
Follow these steps to reappear the bug:
1. start qemu
2. add persistent bitmap: '{ "execute": "block-dirty-bitmap-add",
"arguments": {"node": "drive-virtio-disk1","name": "bitmap0", "persistent":true
}}'
3. stop qemu (Friendly shutdown)
4. re-start qemu
5.
Patchew URL:
https://patchew.org/QEMU/20190125164601.130556-1-vsement...@virtuozzo.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEG
** Description changed:
Follow these steps to reappear the bug:
1. start qemu
2. add persistent bitmap: '{ "execute": "block-dirty-bitmap-add",
"arguments": {"node": "drive-virtio-disk1","name": "bitmap0", "persistent":true
}}'
- 3. kill -9 qemu (simulate Host crash, eg. lose power)
- 4
Public bug reported:
Follow these steps to reappear the bug:
1. start qemu
2. add persistent bitmap: '{ "execute": "block-dirty-bitmap-add", "arguments":
{"node": "drive-virtio-disk1","name": "bitmap0", "persistent":true }}'
3. kill -9 qemu (simulate Host crash, eg. lose power)
4. restart qemu
Patchew URL:
https://patchew.org/QEMU/20190122150543.16889-1-bal...@linux.vnet.ibm.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEG
Patchew URL: https://patchew.org/QEMU/20190202005610.24048-1-cr...@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Subject: [Qemu-devel] [PATCH v2 00/20] Acceptance Tests: target architecture
support
Message-id: 20190202005610.24048
Patchew URL: https://patchew.org/QEMU/20190130073426.11525-1-kra...@redhat.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!
Patchew URL: https://patchew.org/QEMU/20190202005610.24048-1-cr...@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Subject: [Qemu-devel] [PATCH v2 00/20] Acceptance Tests: target architecture
support
Type: series
Message-id: 2019020
Patchew URL: https://patchew.org/QEMU/20190202005610.24048-1-cr...@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 20190202005610.24048-1-cr...@redhat.com
Subject: [Qemu-devel] [PATCH v2 00/20] Acceptance Tes
Patchew URL: https://patchew.org/QEMU/20190202005610.24048-1-cr...@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Subject: [Qemu-devel] [PATCH v2 00/20] Acceptance Tests: target architecture
support
Type: series
Message-id: 2019020
Patchew URL: https://patchew.org/QEMU/20190202005610.24048-1-cr...@redhat.com/
Hi,
This series seems to have some coding style problems. See output below for
more information:
Type: series
Message-id: 20190202005610.24048-1-cr...@redhat.com
Subject: [Qemu-devel] [PATCH v2 00/20] Acceptance Tes
Patchew URL:
https://patchew.org/QEMU/20190125155630.17430-1-sourav.jb1...@gmail.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN
Patchew URL: https://patchew.org/QEMU/20190118112213.11173-1-phi...@redhat.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#!
Le 31/01/2019 à 14:53, Thomas Huth a écrit :
Select the required devices in hw/ppc/Kconfig instead, so that
ppc-softmmu.mak only contains the user-selectable PREP switch.
Plug-in devices like NE2000_ISA are pulled in automatically by the
Kconfig build system now.
Cc: Hervé Poussineau
Signed-off
Patchew URL:
https://patchew.org/QEMU/1548420960--1-git-send-email-th...@redhat.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BE
On 25.11.2018 18:14, Paolo Bonzini wrote:
> On 25/11/18 00:50, Kamil Rytarowski wrote:
>> On 22.11.2018 08:24, Kamil Rytarowski wrote:
>>> On 16.11.2018 13:52, Paolo Bonzini wrote:
On 14/11/18 14:04, Alexandro Sanchez Bach wrote:
> Intel HAXM supports now 32-bit and 64-bit Linux hosts. Thi
This improves the commit:
"target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()"
r. 2140cfa51d59177815f5b82e94ac48fb24909aba
Clang/LLVM on NetBSD with enabled optimization cannot link
correct qemu program because of a missing symbol of
kvm_arch_get_supported_cpuid() in kvm-stubs
Patchew URL:
https://patchew.org/QEMU/20190131130850.6850-1-yuval.sh...@oracle.com/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing
commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN =
The logic in util/qemu-sockets.c is very complicated, containing workarounds
for all sorts of broken/obsolete GAI implementations, so it's hard to tell
what's going on there.
--
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bug
ping6 output when the network is not connected:
$ ping6 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.082 ms
64 bytes from ::1: icmp_seq=2 ttl=64 time=0.092 ms
64 bytes from ::1: icmp_seq=3 ttl=64 time=0.089 ms
^C
--- ::1 ping statistics ---
3 packets transmitted, 3 r
Public bug reported:
I'm not sure if this is a qemu thing or a getaddrinfo/glibc thing, or
even just something about my laptop. However we have a test failure
in nbdkit which only occurs when my laptop is not connected to wifi or
other networking. It boils down to:
$ qemu-img info --image-opt
ip output when the network is not connected:
$ ip a show scope host
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 s
no-re...@patchew.org writes:
> === OUTPUT BEGIN ===
> 1/8 Checking commit 345a0718e21e (Update linux headers (5.0-rc2))
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #1646:
> new file mode 100644
>
> ERROR: code indent should never use tabs
> #3980: FILE: scripts/u
> On Jan 31, 2019, at 7:49 AM, Howard Spoelstra wrote:
>
>
>
> On Thu, Jan 31, 2019 at 12:12 PM Programmingkid
> wrote:
> After testing a recent commit of QEMU I noticed that 256 color support is
> missing in Mac OS 9's color options. A lot of games refuse to run without
> being able to s
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini
Based-on: <1544684731-18828
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini
Based-on: <1544684731-18828
From: Michael Clark
* Add riscv prefix to raise_exception function
* Add riscv prefix to CSR read/write functions
* Add riscv prefix to signal handler function
* Add riscv prefix to get fflags function
* Remove redundant declaration of riscv_cpu_init
and rename cpu_riscv_init to riscv_cpu_init
Michael is no longer employed by SiFive and does not want to continue
maintianing the RISC-V port.
Signed-off-by: Palmer Dabbelt
---
MAINTAINERS | 1 -
1 file changed, 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index af339b86db76..47cb3c14298e 100644
--- a/MAINTAINERS
+++ b/MAINTAINER
From: Richard Henderson
Signed-off-by: Michael Clark
Reviewed-by: Michael Clark
Signed-off-by: Alistair Francis
Signed-off-by: Palmer Dabbelt
---
target/riscv/cpu.h | 6 +++---
target/riscv/translate.c | 10 +-
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/tar
The following changes since commit 5385a5988c8a55bebdc878c05b96648579b5d6e0:
hw/virtio/virtio-balloon: zero-initialize the virtio_balloon_config struct
(2019-01-21 17:20:36 +)
are available in the Git repository at:
git://github.com/palmer-dabbelt/qemu.git tags/riscv-for-master-3.2-part
From: Michael Clark
Add misa checks for M, A, F and D extensions and if they are
not present generate illegal instructions. This improves
emulation accurary for harts with a limited set of extensions.
Signed-off-by: Michael Clark
Signed-off-by: Alistair Francis
Reviewed-by: Richard Henderson
From: Xi Wang
Access to a counter in U-mode is permitted only if the corresponding
bit is set in both mcounteren and scounteren. The current code
ignores mcounteren and checks scounteren only for U-mode access.
Signed-off-by: Xi Wang
Reviewed-by: Palmer Dabbelt
Signed-off-by: Palmer Dabbelt
From: Michael Clark
This patch adds support for writing misa. misa is validated based
on rules in the ISA specification. 'E' is mutually exclusive with
all other extensions. 'D' depends on 'F' so 'D' bit is dropped
if 'F' is not present. A conservative approach to consistency is
taken by flushing
From: Alistair Francis
The gen methods should access state from DisasContext. Add priv_ver
field to the DisasContext struct.
Signed-off-by: Alistair Francis
Reviewed-by: Richard Henderson
Signed-off-by: Palmer Dabbelt
---
target/riscv/translate.c | 7 +--
1 file changed, 5 insertions(+),
From: Richard Henderson
Modifed from Richard Henderson's patch [1] to integrate
with the new control and status register implementation.
[1] https://lists.nongnu.org/archive/html/qemu-devel/2018-03/msg07034.html
Note: the f* CSRs already mark mstatus.FS dirty using
env->mstatus |= mstatus.FS so
From: Michael Clark
gen methods should access state from DisasContext. Add misa
field to the DisasContext struct and remove CPURISCVState
argument from all gen methods.
Signed-off-by: Michael Clark
Reviewed-by: Richard Henderson
Signed-off-by: Alistair Francis
Signed-off-by: Palmer Dabbelt
-
I'll add an ignore when I send the next fpu series.
Thanks.
On Fri, 1 Feb 2019, 18:44 Eric Blake On 1/23/19 5:42 AM, Alex Bennée wrote:
> > The following changes since commit
> 952bc8b3c2cbba78261923a1e8ca55cda261dee9:
> >
> > Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-2
From: Michael Clark
This adds the necessary minimum to support S-mode
virtualization for priv ISA >= v1.10
Signed-off-by: Michael Clark
Signed-off-by: Alistair Francis
Co-authored-by: Matthew Suozzo
Co-authored-by: Michael Clark
Signed-off-by: Palmer Dabbelt
---
target/riscv/csr.c |
On Wed, 30 Jan 2019 22:39:35 PST (-0800), th...@redhat.com wrote:
On 2019-01-30 20:01, Palmer Dabbelt wrote:
On Wed, 30 Jan 2019 09:45:33 PST (-0800), ebl...@redhat.com wrote:
On 1/30/19 11:35 AM, Palmer Dabbelt wrote:
The following changes since commit
5385a5988c8a55bebdc878c05b96648579b5d6e0
On Thu, 31 Jan 2019 01:51:52 PST (-0800), Peter Maydell wrote:
On Thu, 31 Jan 2019 at 06:39, Thomas Huth wrote:
On 2019-01-30 20:01, Palmer Dabbelt wrote:
> On Wed, 30 Jan 2019 09:45:33 PST (-0800), ebl...@redhat.com wrote:
>> On 1/30/19 11:35 AM, Palmer Dabbelt wrote:
>>> The following change
On Fri, 01 Feb 2019 06:08:49 +0900,
Richard Henderson wrote:
>
> I'm not sure how much simplication could be had for "simple"
> variable-length ISAs like ARM thumb2 or RISC-V.
>
> But the recently posted RX port is more complicated than those.
> For me, what makes RX more difficult is that there
47 matches
Mail list logo
