On 08/08/2023 08:27, wen heping wrote:
Hi, ports@:
Here is a simple patch for devel/p5-Moose to update to 2.2206.
It build and run well on amd64-current system, pass all tests.
Update changes is the improvement of TEST, so I did not check
the ports depends on it.
Regards,
wen
Hi, ports@:
Here is a simple patch for devel/p5-Moose to update to 2.2206.
It build and run well on amd64-current system, pass all tests.
Update changes is the improvement of TEST, so I did not check
the ports depends on it.
Regards,
wenIndex: Makefile
Hi, ports@:
Here is a patch for devel/p5-Moose:
i) Update to 2.2201
ii) Update DEPENDS
It build well and pass all tests on OpenBSD-current
amd64 system.
Many ports(80+) depend on it, I tested about 20 of it,
did not meet any problem.
Cheers !
wenIndex: Makefile
@openbsd.org
主题: Re: 回复: [Update] devel/p5-Moose : Update to 2.2013
Hi,
I imported devel/p5-Devel-OverloadInfo.
- devel/p5-MooseX-Clone: i was suspicious about
"BUILD_DEPENDS=${RUN_DEPENDS}", but this avoids nasty warnings.
OK cwen@
- devel/p5-MooseX-Getopt:
Can't locat
Test::Needs module)
- devel/p5-Test-Needs needs to be added to TEST_DEPENDS
- "FIX_EXTRACT_PERMISSIONS = Yes" needs to be set
- devel/p5-Test-Warnings as a TEST_DEPENDS is only needed for
author tests, so it's okay to not add it since we don't run them
OK cwen@
s had been imported, but
p5-Devel-OverloadInfo is waiting for one more OK to be imported.
Cheers !
wen
发件人: Andrew Hewus Fresh
发送时间: 2020年7月31日 12:16
收件人: wen heping
抄送: ports@openbsd.org
主题: Re: [Update] devel/p5-Moose : Update to 2.2013
This needs "
seX-Getopt-0.62
> +DISTNAME=MooseX-Getopt-0.74
> CATEGORIES= devel
> -REVISION=1
>
> # perl
> PERMIT_PACKAGE= Yes
>
> -RUN_DEPENDS= devel/p5-Getopt-Long-Descriptive \
> +RUN_DEPENDS= devel/p
On Sun, Jul 26, 2020 at 01:28:19PM +, wen heping wrote:
> Hi, ports@:
>
> Here is a patch for devel/p5-Moose to update to 2.2013:
> i) It build well and pass all tests on amd64-current system.
> ii) Two new ports should been added : p5-Devel-OverloadInfo
Hi, ports@:
Here is a patch for devel/p5-Moose to update to 2.2013:
i) It build well and pass all tests on amd64-current system.
ii) Two new ports should been added : p5-Devel-OverloadInfo and
p5-Test-CleanNamespaces, which I submitted the patch yesterday.
iii) Many(76) ports
Hi guys,
it's ok for me, tested on i386, amd64.
C.
On Thu, 2011-03-24 at 19:48 +0100, Simon Bertrang wrote:
> On Thu, Mar 24, 2011 at 10:53:02AM +0100, Landry Breuil wrote:
> > On Wed, Mar 23, 2011 at 10:53:39PM +0100, Simon Bertrang wrote:
> > > Hi,
> > >
> > > The diff below updates p5-Class-M
OP::Method::Inlined.3p
+@man man/man3p/Class::MOP::Method::Meta.3p
@man man/man3p/Class::MOP::Method::Wrapped.3p
+@man man/man3p/Class::MOP::MiniTrait.3p
@man man/man3p/Class::MOP::Mixin.3p
@man man/man3p/Class::MOP::Mixin::AttributeCore.3p
@man man/man3p/Class::MOP::Mixin::HasAttributes.3p
Index: p5-Moose/
On Thu, Mar 24, 2011 at 07:56:33PM +0100, Simon Bertrang wrote:
> On Thu, Mar 24, 2011 at 10:53:02AM +0100, Landry Breuil wrote:
> > On Wed, Mar 23, 2011 at 10:53:39PM +0100, Simon Bertrang wrote:
> > > Hi,
> > >
> > > The diff below updates p5-Class-MOP to version 1.12 and p5-Moose to 1.24.
> > >
+@man man/man3p/Class::MOP::MiniTrait.3p
@man man/man3p/Class::MOP::Mixin.3p
@man man/man3p/Class::MOP::Mixin::AttributeCore.3p
@man man/man3p/Class::MOP::Mixin::HasAttributes.3p
Index: p5-Moose/Makefile
=======
RCS file: /cvs/ports/devel/p
On Thu, Mar 24, 2011 at 10:53:02AM +0100, Landry Breuil wrote:
> On Wed, Mar 23, 2011 at 10:53:39PM +0100, Simon Bertrang wrote:
> > Hi,
> >
> > The diff below updates p5-Class-MOP to version 1.12 and p5-Moose to 1.24.
> > Taken from an up to date /usr/ports/devel - update/patch accordingly.
> > A
On Wed, Mar 23, 2011 at 10:53:39PM +0100, Simon Bertrang wrote:
> Hi,
>
> The diff below updates p5-Class-MOP to version 1.12 and p5-Moose to 1.24.
> Taken from an up to date /usr/ports/devel - update/patch accordingly.
> All tests pass here on i386, but more testing is needed.
>
> Tests, comment
ile
===
RCS file: /cvs/ports/devel/p5-Moose/Makefile,v
retrieving revision 1.18
diff -p -u -r1.18 Makefile
--- p5-Moose/Makefile 3 Dec 2010 11:44:33 - 1.18
+++ p5-Moose/Makefile 23 Mar 2011 21:51:29 -
@@ -5,8 +5,7 @@ SHARED_ONLY=Yes
COMMENT= complete modern object sys
'pure_all :: pp_tests'
-+? qq{pure_all :: pp_tests\n} . join qq{\n}, @pp_test_targets
- : '';
-
- return <<"EOM"
-@@ -159,7 +165,5 @@ pp_tests: ${pp_tests}
-
- ${test_dep}
-
--t/pp_%: t/% t/header_pp.inc
--\t\$(NOECHO) \$(ABSPERLRUN) "-MExtUt
Update devel/p5-Class-MOP to 0.80.
devel/p5-Moose update upthread. This diff against -current ports tree.
Passes regress on i386.
Class::MOP 0.80 changes:
0.80 Wed, April 1, 2009
* Class::MOP::*
- Call user_class->meta in fewer places, with the eventual goal
of allowing the u
: '';
-
- return <<"EOM"
-@@ -159,7 +165,5 @@ pp_tests: ${pp_tests}
-
- ${test_dep}
-
--t/pp_%: t/% t/header_pp.inc
--\t\$(NOECHO) \$(ABSPERLRUN) "-MExtUtils::Command" -e cat t/header_pp.inc \$<
> \$@
- EOM
- }
Index: Makefile
===
On Mon, Mar 23, 2009 at 09:06:07AM -0600, Theo de Raadt wrote:
> > On Sun, Mar 22, 2009 at 12:47:28AM -0600, Theo de Raadt wrote:
> > > Another way to solve this is a rewrite of pod2man .. which will then
> > > generate mandoc instead.
> > >
> > > That also benefits the other manual page project.
> On Sun, Mar 22, 2009 at 12:47:28AM -0600, Theo de Raadt wrote:
> > Another way to solve this is a rewrite of pod2man .. which will then
> > generate mandoc instead.
> >
> > That also benefits the other manual page project.
>
> hum... so let's trade 10 lines of makewhatis to a complete new back-
On Sun, Mar 22, 2009 at 12:47:28AM -0600, Theo de Raadt wrote:
> Another way to solve this is a rewrite of pod2man .. which will then
> generate mandoc instead.
>
> That also benefits the other manual page project.
hum... so let's trade 10 lines of makewhatis to a complete new back-end
to pod2man
Another way to solve this is a rewrite of pod2man .. which will then
generate mandoc instead.
That also benefits the other manual page project.
> Actually, this is more complex than it looks, because recent pod converters
> make a lot of use of
> .ie n
> .el
> constructions, and that throws makew
Actually, this is more complex than it looks, because recent pod converters
make a lot of use of
.ie n
.el
constructions, and that throws makewhatis completely off-base, especially
wrt Moose.
I have some quick hacks which allow it to proceed, and I'm still wondering
whether I should actually teach
sion 1.1.1.1
diff -u -r1.1 -r1.1.1.1
Index: Makefile
===
RCS file: /cvs/ports/devel/p5-Moose/Makefile,v
retrieving revision 1.6
diff -u -r1.6 Makefile
--- Makefile10 Feb 2009 10:31:32 - 1.6
+++ Makefile6 Mar 2009 10:21:0
Index: Makefile
===
RCS file: /cvs/ports/devel/p5-Moose/Makefile,v
retrieving revision 1.6
diff -u Makefile
--- Makefile10 Feb 2009 10:31:32 - 1.6
+++ Makefile13 Feb 2009 22:12:14 -
@@ -3,7 +3,7 @@
COMMENT= complete modern object sy
Moose-0.69
CATEGORIES=devel
# perl
Index: distinfo
===
RCS file: /cvs/ports/devel/p5-Moose/distinfo,v
retrieving revision 1.5
diff -u distinfo
--- distinfo10 Feb 2009 10:31:33 - 1.5
+++ distinfo13 Feb 2009
On Mon, Feb 09, 2009 at 04:23:40PM -0800, James Wright wrote:
> Simon Bertrang wrote:
>> On Mon, Feb 09, 2009 at 03:41:40AM -0800, James Wright wrote:
>>
>>> This updates Moose to 068. This update depends on the previously posted
>>> p5-Class-MOP update, I also added a bunch of regress-depends
Simon Bertrang wrote:
On Mon, Feb 09, 2009 at 03:41:40AM -0800, James Wright wrote:
This updates Moose to 068. This update depends on the previously posted
p5-Class-MOP update, I also added a bunch of regress-depends, though some
tests are still skipped due to missing dependencies (that are
Simon Bertrang wrote:
On Mon, Feb 09, 2009 at 03:41:40AM -0800, James Wright wrote:
This updates Moose to 068. This update depends on the previously posted
p5-Class-MOP update, I also added a bunch of regress-depends, though some
tests are still skipped due to missing dependencies (that are
On Mon, Feb 09, 2009 at 03:41:40AM -0800, James Wright wrote:
> This updates Moose to 068. This update depends on the previously posted
> p5-Class-MOP update, I also added a bunch of regress-depends, though some
> tests are still skipped due to missing dependencies (that are not yet in
> the tr
On 2009/02/09 03:41, James Wright wrote:
> This updates Moose to 068. This update depends on the previously
> posted p5-Class-MOP update, I also added a bunch of regress-depends,
> though some tests are still skipped due to missing dependencies (that
> are not yet in the tree): Params::Coerce,
.
This release adds a huge swath of actually useful documentation (thanks
to a Perl Foundation grant), check out Moose::Manual (supersedes
Moose::Intro).
Index: Makefile
===
RCS file: /cvs/ports/devel/p5-Moose/Makefile,v
retrieving
On Sat, Jan 31, 2009 at 02:08:56PM -0800, James Wright wrote:
> Simon Bertrang wrote:
>> On Fri, Jan 30, 2009 at 06:39:58AM -0800, James Wright wrote:
>>
>>> Are there plans for updating of Moose to 0.61 before the ports tree lock?
>>> It does depend on updated Class::MOP and Sub::Exporter. I
Simon Bertrang wrote:
On Fri, Jan 30, 2009 at 06:39:58AM -0800, James Wright wrote:
Are there plans for updating of Moose to 0.61 before the ports tree lock?
It does depend on updated Class::MOP and Sub::Exporter. I have updates for
these and a bunch of lightly tested (only on i386) Moose
L0InbK1VpAIZ7ZDDySvtieVjs=
+SHA256 (Class-MOP-0.75.tar.gz) = OGIQr9jTvFwec1vxSghREqqwqnYJhTe+qO2Bf1D9xUQ=
+SIZE (Class-MOP-0.75.tar.gz) = 153042
Index: p5-Moose/Makefile
===========
RCS file: /cvs/ports/devel/p5-Moose/Makefile,v
retrieving r
Are there plans for updating of Moose to 0.61 before the ports tree
lock? It does depend on updated Class::MOP and Sub::Exporter. I have
updates for these and a bunch of lightly tested (only on i386) Moose
extensions, i.e. MooseX::POE MooseX::Iterator MooseX::SimpleConfig
Moose::Policy MooseX
37 matches
Mail list logo
