I too have been very dismayed by their decision to remove the
CyberCash module. I'm consequently forced to never upgrade my
PHP again as I depend on that module. Verisign, as you mention,
*DOES* support Cybercash still, and switching to payflow will
cost us money - not only with Verisign, but wi
- Original Message -
From: "erich" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, February 26, 2003 12:50
Subject: [PHP] gethostbyaddr woes
> for some reason i cannot retrieve a hostname using gethostbyaddr().
>
> if it helps, my host is http://phpwebhosting.com/. i have ask
Hi everyone,
I'm a newbie. I've been searching google and php.net trying to find
information on how to set up a Master Page to do multiple records updating,
but have found very little. I have a table with 10 rows of data from MySQL
and I'd like the user to check the "Approve" checkbox and for a
I do not know if this is the right list, but if someone could help me with
the following
I need a function that does this:
function phone($num) {
take num and remove anything that is not a number
ex: () - /
If there is not 1 at the start, add a one to the start of the number.
make sure that
When I used apache 1.3 I could call a file with an extension of .phps and
it would display formatted source.
In apache 2.0 it does not do this
Here is my config from apache 2.0
LoadModule php4_module modules/libphp4.so
#
# Cause the PHP interpreter handle files with a .php extension.
#
S
Try
Prosavvy.com
On Fri, 7 Nov 2003, David T-G wrote:
> James, et al --
>
> ...and then James said...
> %
> % Can anyone recommend a good place where I can find some talented PHP
> % contractors?
>
> That's been discussed on this list a few times before, so the archives
> may be of some help
I have a db in sql, and I need a php/mysql query/command to copy the
entire db (schema and data) to a new db. I know how to do this with a
table, but I can not figure out how to do this with a whole db. I also
know that I could do it using mysql dump, but I don't want to have to run
a shell c
This is for an intranet application, I trust my users.
Michael
On Wed, 19 Nov 2003, Raditha Dissanayake wrote:
> Creating new databases is usually done with the mysql root account. Bad
> idea to use this account in a php script.
>
> Lists wrote:
>
> >I have a db in
> I currently run a few newsletters that go out to small groups of
> % 50 to 100 people. I use a while loop to send out the emails. I chose
I have a module that does about about 100 emails (10Kb of data per email, which is
a decent sized email) in 8 - 10 seconds. (Does around 610 - 625 e
Sounds like you could use a mime_mail class to build your email. The best
I've
found is at phpWizard and is by Sascha Schumann and Tobias Ratschiller.
I have written a very basic downloader script using this class that emails
tar.gz packages
as attachments to a user upon request. You can try the
I don't know what you're doing with your data, but it might be worth
knowing that in some languages such as Spanish and Italian (and French I
think) upper case letters are not always written with accents even though
the same word would have accents in lower case.
On Fri, 12 Jan 2001, TV Karthick
Hi,
Mod_auth_mysql uses a persistant connection to mysql. Will php use
the same connection for any given apache child or does that then mean to
mysqlds for each child, one used with mod_auth_mysql and one when php does
requests ?
Hope I'm making myself clear.
--
PHP General Ma
We hired a developer about a year ago to develop a
web based email system for us in php. The developer
is no longer around, so I am having to pick up
the development on the project...When clicking
on the attachment link of an email in Internet
Explorer 5.5 in Windows 98, I get the save as dialog
a
Does anyone have a good script for uploading an image and storing it in a
mySQL database.
Thanks
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the list administrators, e-mail: [EMAIL PR
I have tried compling in the VeriSign support for phpI just downloaded
the newest version of the VeriSign SDK, however, after I complie it with
apxs and I restart httpd it will not start. If I removed the --with-pfpro
statment it works fine.
Any ideas?
Michael
--
PHP General Mailing
I need to pass a variable to Perl from a PHP script. I am somewhat know
PHP but I do NOT know perlI am running my perl script off of the
command line. I tried /path/to/somewhere/script.pl?var=var
but it did not work.
I would love any help you could provide me
Thanks,
Michael
--
PHP G
Ok,
I got it to work.now how do I take a varaible back into PHP
I do a $var = system("/path/to/cgi $varforCGI")
and in the CGI script I do a print $varforPHP
however it prints the varforPHP to the broswer, I need it saved it var
Any (more) help would be great!!
Michael
On Wed, 6 Mar 2002
I have compiled php with the enable-trans-sid (for the site I am using I
can NOT use cookies)
when I start a session or store something in _SESSION['varname'] varname
can not be accessed on other pages
nor is there a file in the /tmp file
nor does my URI change with a session id
Any Id
I have complied PHP with the enable trans id option
However, when I start a session and go to a relivtive link , (./page.php)
I do not get a session id in my URI.
Any Ideas?
Michael
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Hi all,
I have a large file that I am trying to parse.
I have a many lines that look like this
\\text1
I need an expression that will change \\text1 to text1=
so if I have something like this
\\text1
asdfkjaslkfj
asdlfkjasljkf
asdlkfjasldfkj
asldkfjalskfj
\\text2
erweiurwoeir
werqwer
qw
I have a setup where users can access their own pages using a /~username
here account
I need to put a PHP script in their directoies that will be able to tell
me what their username is.
I was thinking about $REQUEST_URI however if I go to /~username/dir/page
it will return it all.
all I want
Ok,
How do I do that?
> Hi Michael
>
> How about explode()ing it using '/' as the seperator, then finding the
> element in the resulting array that begins with '~', strip that first
> character using substr() and bod's your uncle...
>
> I'd write the code but I've had a long day...
>
> Sha
I have a redhat 7.1 system, I am using shadow passwords.
Is there a way to authenticate people using thier shadow password?
Michael
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
To contact the lis
I have a database with 2 colums in it
-|--|
Place of work| Name |
-|--|
I want to print out a listing of peoples name by the place their work from
a php script
so
Place 1
person a
person b
person c
Place 2
person d
Place 3
person F
person G
This has
Does anyone know of a tool to export a frame of a Flash movie to a flat
image file on the client-side? I want users to be able to set the last
frame of my flash movie as their wallpaper.
The only way I know of doing this is to use PHP to re-build the Flash
frame by receiving coordinates from the
On Thu, 5 Jul 2001, Don Read wrote:
> > Anyone know how I can write and read to different lines in a file rather
> > than just adding to the text already on the first line of the file?
>
> A. suck the whole thing up in memory, change it there, write it back out.
Just as a note: for large (text o
On Thu, 5 Jul 2001, Dieter Stolpmann wrote:
> Hi,
>
> I'm trying to solve the following issue in a (hopefully) simply way:
>
> - I'm creating web-pages using php and perl (using a page template)
> - the dynamically created pages may contain php code which I like to get
> interpreted in a normal
Hello list,
I have a security problem to solve with my apache setup and I am clueless
at this moment...
My web server holds multiple domains and uses name-based virtual servers
to direct requests to different portions of the html tree for different
domain names (we presume only one IP is availa
On Fri, 6 Jul 2001, Daniel Baldoni wrote:
> G'day folks,
>
> Here's a theoretical question for those of you using PHP's inbuilt session
> facilities...
>
> How do you "keep" your variables across redundant servers? Or,
> isn't anybody out there hosting PHP-based services on grouped
>
On Fri, 6 Jul 2001, Daniel Baldoni wrote:
> Considering NFS is stateless, why do you consider it to be a more acceptable
> solution to, say, rsync (which I personally don't like - but that's another
> matter)?
Ok, sorry, I should have explained my reasoning.
Afaik rsync executes periodically to
I"m kinda bummed, I tried to us it last night and discovered I could
not use it because Pair Networks disables the ability, can't include
either.
from their newsletter:
"Lately, the most common method of exploit has been to pass a variable
to a PHP script which does not sufficiently check the v
Hi List,
I"m wondering what factors are at play in deciding to use "require",
"include", "file_get_contents" and such when laying out a site. Like
why use one template, or many - why use different pages rather than
relying on variables. I'm also wondering about how I see "{content}"
type stuf
.
-dg
On Oct 12, 2004, at 2:16 PM, Robert Cummings wrote:
On Tue, 2004-10-12 at 16:19, lists wrote:
Hi List,
I"m wondering what factors are at play in deciding to use "require",
"include", "file_get_contents" and such when laying out a site. Like
require() gene
On Oct 12, 2004, at 6:52 PM, Matthew Weier O'Phinney wrote:
I haven't had much luck with PHP books when it comes to efficient
coding
techniques and site/application architecture. It's a niche that needs
to
be filled.
Another thing you might want to research is the MVC pattern
(Model-View-Control
Hmmm, I'm not sure I am following you. Maybe:
header ("Location: page.php");
exit;
So you could do something like: if this condition then go to new page,
else go to other page?
-dg
On Oct 2, 2004, at 9:44 AM, Arnold wrote:
I don't think include replaces the calling php script.
What i mean is tha
Hi List,
My boss recently called PHP "good for hobbyists" but REAL sites have to
be done with Microsoft technologies. He wants to use Sharepoint for a
wiki type site because of versioning.
Can anyone point me to resources about versioning and inherent
strengths and reliability of PHP?
Thanks.
Thanks for all the great replies. I will have fun preparing this
particular report.
-dg
On Oct 7, 2004, at 1:00 PM, Matthew Sims wrote:
Hi List,
My boss recently called PHP "good for hobbyists" but REAL sites have
to
be done with Microsoft technologies. He wants to use Sharepoint for a
wiki ty
:-)
Donovan
--
=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o
D. BROOKE EUCA Design Center
WEB:> http://www.euca.us
=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/un
O.K., I may get a back lash.. but I can't resist
making a very small plug here for our server side
language, WebDNA.
Here is the same code in WebDNA:
The Form:
[loop start=1&end=3]
[/loop]
The Recieving page code (loop):
[formvariables name=go_&exact=F]
[value]
[/formvariables]
The URL:
h
tedd wrote:
[snip]
No problem here -- I'm open to all languages.
The OP posted his question on a php list and that's the reason why I
responded with a php solution.
Now, can you show me how to pull data from a mysql database so that the
input statements can be created dynamically?
Cheers,
George Larson wrote:
[snip]
Donovan:
There's no "powers that be" on this list. The closest is Dan and we all
ignore him. :-)
Next question -- how do you keep login's and passwords safe? Is the
following not embedded in the html?
[SQLConnect
dbType=MySQL&host=192.168.1.1&database=TestNames&uid=
Stutter Stutters wrote:
I've been wrestling with mac os x + php 5.2.6 off and on for a few months to
get it to load the memcache.so and imagick.so extensions. When I executed
php on the command line `php -i | grep imagick` or `php -i | grep memcache`
the output shows that imagick and memcache ar
Stutter Stutters wrote:
I used Pecl to install memcache and imagick, I ran the command you
mentioned and this was the output:
$ file /usr/lib/php/extensions/no-debug-non-zts-20060613/memcache.so
/usr/lib/php/extensions/no-debug-non-zts-20060613/memcache.so: Mach-O
bundle i386
I don't see anyth
Hello, I have not had a lot of opportunity to deal with stdClass
objects in php. This should be a simple one. I have been plagued
with failure for far too many hours, so I bring it to the more
experienced.
I have $result = imap_fetch_overview(...) which returns a large
stdClass object, depending
Good advice, what I usually do is a conditional to turn it all off
except for a set of IP addresses that I work at.
On Mon, Apr 6, 2009 at 3:52 PM, Shawn McKenzie wrote:
> George Langley wrote:
>> Hi all! Have a question about hiding PHP errors from the end user.
>> I have the followi
Marc Christopher Hall wrote:
Sun buys MySQL and now Oracle buys Sun (not final, yet). What will happen
with the main db we PHP'ers have come to know and love especially since v 5
Sorry Marc, meant to send this to the list...
I don't know what to think of this yet. Oracle has always competed wi
PJ wrote:
How to deactivate checkboxes when one in a series is checked?
So that only 1 of the other inputs could be used in a search. Probably
do the rest with switch stuff.
Would be neat if the deactivated checkboxes would go grey.
Is this an HTML question? Use onclick?But I think I need to
tedd wrote:
At 4:58 PM -0400 4/23/09, PJ wrote:
>>> tedd wrote:
>>> > http://php1.net/a/edit-db-demo/
>>>
>H I've looked at your demo and, frankly, don't see it working.
When I enter names and click on one of the search buttons, I don't get
sane results. For instance, entering John
Govinda wrote:
I'd love a good time log/billing app.
I currently use
http://www.getharvest.com/
but it is too expensive for such a small operation as me. But I LOVE
the features.
BTW, what are you all (especially you who are one-man contractors like
me) using to keep track of your time..
Gary wrote:
Thanks again, dont see any DOM
As I mentioned I am no longer getting error message, but not sure it is
working.
I have this at the begining of the first file.
if (isset($_COOKIE['sale_cookie']) && isset($_COOKIE['assess_cookie']))
{
$_SESSION['sale_value'] = $_COO
Andrew Hucks wrote:
$sale_value would have worked if it hadn't been in single quotes, I
believe. (Assuming it was populated.).
Which it wasn't.. ;-) according to Gary's last post. He assigned it now
with 'sale'.. however, I think it should rather be in double quotes
("sale") if he wants to get
Bob McConnell wrote:
They are all going to the same place, so what is wrong?
To address your question, credit cards are not easy. As soon as you set
up a site to accept them you must conform to a number of security and
interface requirements. If you have never done it before, either hire
someone
Ellen Heitman wrote:
Hello! I would really appreciate some answers to a few basic questions. I
have done some research online, but it would greatly help me to get direct
answers.
1. If my site needs to be available to many browsers, including those that
may not be entirely up-to-date, is PHP a sa
Jim Lucas wrote:
Jim Lucas wrote:
Since this has been a topic of dicussion, I figured I would add my
thoughts.
I have been toying with the idea of doing a -less layouts
involving tabular data, calendars, etc...
Recent threads have finally made me do it. Let me know what you think.
Hi Ji
Paul M Foster wrote:
[snip]
> I wish someone had thought of a similar thing for databases. From the
> beginning, there should have been a spreadsheet-like interface for
> databases. This could have saved endless trouble, since for lack of
> this, people store database information in spreadsheets.
ASP (Classic) and ASP.NET = two different things.
en.wikipedia.org/wiki/Active_Server_Pages
Personally, I don't see a reason for putting anyone, or any
company through the torture of building web apps with
.NET. ...VBSCRIPT for the web just doesn't make sense to
me with the other solutions that
haliphax wrote:
On Mon, Jun 1, 2009 at 2:18 PM, Lists wrote:
ASP (Classic) and ASP.NET = two different things.
en.wikipedia.org/wiki/Active_Server_Pages
Personally, I don't see a reason for putting anyone, or any
company through the torture of building web apps with
.NET. ...VBSCRIPT fo
Daniel Brown wrote:
On Mon, Jun 1, 2009 at 17:08, Lists wrote:
I usually prefer a language called WebDNA [...]
[snip!]
--
=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o=o
D. BROOKE EUCA Design Center
WebDNA Software Corp.
I could
Angus Mann wrote:
Hi all.
I'm working on a PHP project for my own personal business use. It will
handle billing and invoices as well as payments and time management,
bookings, appointments and a few more. I may add things like personal
messaging between the various users and a customer login
Miles Thompson wrote:
[snip]d they're OK. We have probably standardized on Drupal.
The big advantage is that they manage all the CRUD, and you spend 80%
of your time bending either one to do the non-standard 20% which you
absolutely *must* have.
[snip]
I think that is the "krux" of it for me..
Michelle Konzack wrote:
[snip]
so, I have set the the domain explicit to "myspace.tdwave.net" which
should register the cookie as it is according to the PHP manual or not?
Thanks, Greetings and nice Day/Evening
Michelle Konzack
the above will still make the cookie available to:
> foo
Hi,
I am running Fedora Core 6 with PHP 5.1.6
This little snippet will output "the file is not writable":
if (file_exists($file)) {
if(!is_writeable($menu_filename)){
echo "the file is not writable";
}
} else echo "The file does not exist";
I have set the permis
Sorry, it should be $file for both as in the more complex code. So the
below code is the code that is generating "the file is not writable".
if (file_exists($file)) {
if(!is_writeable($file)){
echo "the file is not writable";
}
} else echo "The file does not exist";
Some additional information:
On the running server I am getting this dumped:
audit(1168010361.652:217): avc: denied { write } for pid=2924
comm="httpd" name="hcat.log" dev=dm-0 ino=8718108
scontext=root:system_r:httpd_t:s0
tcontext=root:object_r:etc_runtime_t:s0 tclass=file
Anyone?
/
Thanks for your answer,
It was a bit late because we already disabled selinux just to try, and
it worked :) But hopefully this could help someone that bumps into the
same problem.
On a live webserver, what security issues would disableing the selinux
cause? Any?
Best regards,
Peter Laur
[EMAIL PROTECTED] skrev:
I would like to add some graphing capability to an app of mine. What package is
recommended? I don't need anything too fancy, just some bar graphs, pie charts,
etc.
Thank you in advance.
Take a look a at: http://www.java2s.com then click on PHP in the menu
and then
Hi,
I was not having PHP on the machine I am reading this email for the
moment. But I tried to use it together with egrep, but it didn't work.
Maybe egrep is using different syntax for these lookaheads, but with
other tests it has been working same as for preg_match in PHP. As you
see the
Quoting Martin Zvarík <[EMAIL PROTECTED]>:
I did a benchmark with and without caching to HTML file and it's like:
0.0031 sec (with) and 0.0160 sec (with database)
I know these miliseconds don't matter, but it will have significant
contribution in high-traffic website, won't it?
Martin
--
PHP
Quoting Roman Neuhauser <[EMAIL PROTECTED]>:
# [EMAIL PROTECTED] / 2007-03-01 18:28:35 +0200:
#/thepathtophp
echo "Command ls -lrt could not be executed correctly.
Exit code: $exitcode\n";
} else {
echo "Result:\n";
foreach($stdout AS $line) {
Quoting Roman Neuhauser <[EMAIL PROTECTED]>:
# [EMAIL PROTECTED] / 2007-03-01 18:28:35 +0200:
#/thepathtophp
echo "Command ls -lrt could not be executed correctly.
Exit code: $exitcode\n";
} else {
echo "Result:\n";
foreach($stdout AS $line) {
Hi,
I am having some problems getting my mod_rewrite to work on my development
server. On my
production server (linux) this works fine. But on my development server it
woun't work.
I have a file basicpage.php that is located in the webroot. I then have
a .htaccess file
with the following content
Hi,
I thought I could define() and array. However, when I do this:
define("THECONSTANT", array(1,2,3));
print_r(THECONSTANT);
it prints THECONSTANT and not the array :(
according to the manual:
bool define ( string $name, mixed $value [, bool $case_insensitive] )
And isn't "mixed" of any typ
On Wed, 21 Jul 2010 01:04:12 +0300, Sorin Buturugeanu wrote:
> Hello Vincent and thank you for your reply :).
>
> That's true, I forgot to explain how I got to using HEREDOC, so ..
>
> Using eval(file_get_contents($file)) just outputs the result on the
> spot and I need
> to get the
Sense of Security - Security Advisory - SOS-11-007
Release Date. 20-May-2011
Last Update.-
Vendor Notification Date. 04-Apr-2011
Product.Securimage / PHPCaptcha
Platform. PHP
Affected versions. 1.0.4 - 2.0.2
Severity
Windows Server 2003
PHP fastcgi 5.2
Hello,
I am needing to call a php script from another language, so I am using cli.
I have it basically working but have a couple questions.
First, what is the (suggested) '-q' flag for in the shebang script?
last, my shell is returning the actual call along
Lists wrote:
Windows Server 2003
PHP fastcgi 5.2
O.K. '-q' is quiet mode (no header info), which works better when not
using the -f flag when calling the script (it appears).
anyway, I solved my issues with a work around, so no worries.
Donovan
--
dbrooke
--
PHP General Ma
Joe Francis wrote:
why not using php.exe instead of php-cgi.exe as a parser ?
Thanks for pointing that out... didn't have any reasoning, but since
your post, I've learned the difference and have changed the script.
Donovan
--
dbrooke
--
PHP General Mailing List (http://www.php.net/)
To
tortoise is nice
http://www.tortoisecvs.org/
-chris
http://www.semioticpixels.com
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
<>
you're so right. I meant to send the link for horde
http://www.horde.org/chora/
chris
http://www.semioticpixels.com
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
May 29, 2004 12:02 PM
To: [EMAIL PROTECTED]
Subject: Re: [PHP] CVS web front end
Lists wrote:
> <>
>
> you're so right. I meant to send the link for horde
>
> http://www.horde.org/chora/
Are you able to check out files? check in etc.?
As far as I can see - it is just
>
> Yes, that is a little better. Thanks for that!
> But now all the PHP is removed. Is there some other header to send, in
> order
> to get PHP in my output?
>
Could you send the code you are having? If you are doing it properly all
should be shown, it will not remove anything. The file() don't p
Hi,
Job onsite at Telecom giant in Finland (guess what telecom giant). Please
see http://jobs.perl.org/job/7322 for more info. Send CV if you're
interested to [EMAIL PROTECTED]
/Peter
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Hi,
I have this script testing.php that I run on a Linux machine thru the
command line. In the end of the file you see two cases. One where it
is just having a while(true) loop doing nothing, and the other calling
an other script that is doing nothing but doesn't exit. When I send
SIGTERM
Hi,
Summary:
1. I execute script1 that will run in the background (daemon)
2. script1 needs to execute script2 and capture STDERR, STDOUT and
exitcode from script2 if script2 exits before SIGTERM is received.
3. If I send SIGTERM to script1 it should kill script2, and write to
DB (or log fi
Hi,
Just becasue you create a persistent connection it can still go down,
can't it? So therefore using mysql_ping inside of scripts with plenty
of idle time is useful?
/Peter
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
Quoting Richard Lynch <[EMAIL PROTECTED]>:
On Tue, August 7, 2007 3:58 am, [EMAIL PROTECTED] wrote:
Just becasue you create a persistent connection it can still go down,
can't it? So therefore using mysql_ping inside of scripts with plenty
of idle time is useful?
It can still go down, for sur
Hi,
Using the below code to force download works fine on most servers and
with most
browsers. However it does "crash" Firefox when I download a specific file, IE
works like beauty. File content starts with:
#!/sbin/_joor_perl_use Filter::decrypt..
This is the code to force the download:
header ("Location: ./");
exit;
I use the above at the end of a authorization script, to direct back to
a page.
On Oct 31, 2004, at 12:03 PM, Ken Tozier wrote:
I've been looking around in the php documentation for a couple of
hours now but can't seem to find any functions to open a url in the
It looks like you can change quite a bit by opening the "body.php" file
in the "templates" folder. If you are using FP, if you haven't
already, make sure to set it so it does not affect code. You might
want to open that in Notepad to make sure though.
On Oct 31, 2004, at 1:03 PM, Melanie wrot
Seeing the page might help.
On Nov 1, 2004, at 2:52 AM, Garth Hapgood - Strickland wrote:
I have written a registration page in php and have a number of edit
boxes
and drop-down lists. The lists are pulling data out of their respective
tables, whereas the edit boxes are just for saving data.
Now
Hmmm...I'm not sure I'm following you. You just want to know how to
deal with multiple drop down lists? Or do you want to be able to check
and make sure all the mandatory selections have been chosen?
-dg
http://www.rexruff.com
On Nov 2, 2004, at 4:58 AM, Garth Hapgood - Strick
hi
wondering if anyone can help me with this one... im running php 4.3.9 on
windows 98. im tryin to get the xslt functions working. i have follwed
the instructions here:
http://sniptools.com/vault/sablotron-xslt-php-apache-on-windows-and-a-basic-xslt-tutorial.htm
i still am not getting them worki
I think it depends on whether or not someone is watching it.
On Nov 24, 2004, at 5:10 PM, Dustin Krysak wrote:
Hi there
I was making a script that had a loop, and ended up with a endless
loop by accident. Now if that script is executed on the server - does
the script die as soon as the browse
I'm presently reading "Using XSLT" and have created their examples
using PHP and sablotron to render HTML from XML and an XSL template.
I understand the value of using XSLT to render XML, but what is the
advantage or reasons for generating XML from a database and rendering
it to HTML using XSLT
On Dec 10, 2005, at 7:43 AM, Leonard Burton wrote:
That is one thing I notice is convieniently left out of the
tutorials. If they don't know about ctl+ why would I waste time
reading their tutorial? When I come across a tutorial on replacing
tables with CSS I look to see if it mentions the us
http://www.alistapart.com/articles/phpswitch/
or
http://www.alistapart.com/articles/alternate/
maybees
-dg
On Jan 9, 2006, at 10:58 AM, Mike Tuller wrote:
I am drawing a blank on how to go about doing this for some reason.
I have a page that pulls info from a database, and I want to have a
Hello List,
I made something work, but probably in the most crappy way possible.
My goal is to take just the HTML for the image and link from the
Flickr badge js script.
This is what I did, please help me do in a better way. I'd
appreciate good sources to read to learn to strip stuff away
Hello,
I am trying to get xml from AIM's new presence API.
The url is unusual, it has quotes in it.
Anyone know a way to get the text from this?
http://api.oscar.aol.com/SOA/key=PandorasBoxGoodUntilJan2006/resource-lists/
users/*anonymous*/presence/~~/resource-lists/list[name=\&
om/SOA/key=PandorasBoxGoodUntilJan2006/resource-lists/
>> users/*anonymous*/presence/~~/resource-lists/list[name=\"users\"]/[EMAIL
>> PROTECTED]
>> =\"user:screenname\"]
>>
>> Insert your own screen name to see what it returns
>>
>>
On Jan 30, 2006, at 11:13 AM, Richard Davey wrote:
I use Pair Networks (www.pair.com
I vote Pair too.
--
PHP General Mailing List (http://www.php.net/)
To unsubscribe, visit: http://www.php.net/unsub.php
1 - 100 of 638 matches
Mail list logo
