From: Sean Wang
Enlarge the SGMII register range and using 2.5G force mode on default.
Signed-off-by: Sean Wang
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
b/arch/arm64/boot/dts/med
From: Sean Wang
Fixed several errors caused by undefined symbols catched by kbuild test
robot.
ERROR: "mtk_sgmii_init" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko]
undefined!
ERROR: "mtk_setup_hw_path" [drivers/net/ethernet/mediatek/mtk_eth_soc.ko]
undefined!
ERROR: "mtk_sgmii_setup_mode_for
From: Sean Wang
It's required to create a modules.alias via MODULE_DEVICE_TABLE helper
for the OF platform driver. Otherwise, module autoloading cannot work.
Signed-off-by: Sean Wang
---
drivers/net/dsa/mt7530.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/dsa/mt7530.c b/dri
From: Sean Wang
MODULE_ALIAS exports information to allow the module to be auto-loaded at
boot for the drivers registered using legacy platform registration.
However, currently the driver is always used by DT-only platform,
MODULE_ALIAS is redundant and should be removed properly.
Signed-off-by
From: Sean Wang
Remove superfluous pin setup to get out of accessing invalid I/O pin
registers because the way for pin configuring tends to be different from
various SoCs and thus it should be better being managed and controlled by
the pinctrl driver which MT7622 already can support.
Signed-off-
From: Sean Wang
The property "mediatek,pctl" is only required for SoCs such as MT2701 and
MT7623, so adding a few words for stating the condition.
Signed-off-by: Sean Wang
---
Documentation/devicetree/bindings/net/mediatek-net.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --g
From: Sean Wang
Update maintainers for MediaTek switch driver with Landen Chao who is
familiar with MediaTek MT753x switch devices and will help maintenance
from the vendor side.
Cc: Steven Liu
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
MAINTAINERS | 1 +
1 file changed, 1 inser
From: Sean Wang
Lockdep found an inconsistent lock state when mtk_get_stats64 is called
in user context while NAPI updates MAC statistics in softirq.
Use spin_trylock_bh/spin_unlock_bh fix following lockdep warning.
[ 81.321030] WARNING: inconsistent lock state
[ 81.325266] 4.12.0-rc1-00035
From: Sean Wang
The series adds the driver for ethernet controller found on MT7622 SoC.
There are additions against with previous MT7623 SoC such as shared SGMII
given for the dual GMACs and built-in 5-ports 10/100 embedded switch support
(ESW). Thus more clocks consumers and SGMII hardware setup
From: Sean Wang
The patch adds the supplements in the dt-binding document for MediaTek
MT7622 SoC with extra SGMII system controller and relevant clock consumers
listed as the requirements for those SoCs equipped with the SGMII circuit.
Also, add the missing binding information for MT7623 SoC her
From: Sean Wang
This patch adds the driver for ethernet controller on MT7622 SoC. It has
the similar handling logic as the previously MT7623 does, but there are
additions against with MT7623 SoC, the shared SGMII given for the dual
GMACs and including 5-ports 10/100 embedded switch support (ESW)
From: Sean Wang
Sean and Nelson work for MediaTek on maintaining the MediaTek ethernet
driver for the existing SoCs and adding support for the following SoCs.
In the past, Sean has been active at making most of the qualifications
, stress test and submitting a lot of patches for the driver while
From: Sean Wang
This patch is the preparation patch in order to adapt into various
hardware through adding platform data which holds specific characteristics
among MediaTek SoCs and introducing the unified clock handler for those
distinct clock requirements depending on different features such as
From: Sean Wang
The patch adds the supplements in the dt-binding document for MediaTek
MT7622 SoC with extra SGMII system controller and relevant clock consumers
listed as the requirements for those SoCs equipped with the SGMII circuit.
Also, add the missing binding information for MT7623 SoC her
From: Sean Wang
Sean and Nelson work for MediaTek on maintaining the MediaTek ethernet
driver for the existing SoCs and adding support for the following SoCs.
In the past, Sean has been active at making most of the qualifications
, stress test and submitting a lot of patches for the driver while
From: Sean Wang
This patch adds the driver for ethernet controller on MT7622 SoC. It has
the similar handling logic as the previously MT7623 does, but there are
additions against with MT7623 SoC, the shared SGMII given for the dual
GMACs and including 5-ports 10/100 embedded switch support (ESW)
From: Sean Wang
Changes since v1:
- add refinement for ethernet clock management
- take out the code block for ESW, add it until ESW driver is actually
introduced
The series adds the driver for ethernet controller found on MT7622 SoC.
There are additions against with previous MT7623 SoC such as
From: Sean Wang
This patch is the preparation patch in order to adapt into various
hardware through adding platform data which holds specific characteristics
among MediaTek SoCs and introducing the unified clock handler for those
distinct clock requirements depending on different features such as
From: Sean Wang
Potential dangerous invalid memory might be accessed if invalid mac value
reflected from the forward port field in rxd4 caused by possible potential
hardware defects. So added a simple sanity checker to avoid the kind of
situation happening.
Signed-off-by: Sean Wang
---
drivers
From: Sean Wang
Potential dangerous invalid memory might be accessed if invalid mac value
reflected from the forward port field in rxd4 caused by possible potential
hardware defects. So added a simple sanity checker to avoid the kind of
situation happening.
Signed-off-by: Sean Wang
Acked-by: Jo
From: Sean Wang
dsa_is_cpu_port() checking ds->cpu_port_mask is not available in
ds->ops->get_tag_protocol
Since commit 14be36c2c96c ("net: dsa: Initialize all CPU and enabled
ports masks in dsa_ds_parse()") So force returning DSA_TAG_PROTO_MTK
inside mtk_get_tag_protocol call after that.
Cc: F
From: Sean Wang
In order to let MT7530 switch can recognize well those packets
having both special tag and VLAN tag, the information about
the special tag should be carried on the existing VLAN tag.
Signed-off-by: Sean Wang
---
net/dsa/tag_mtk.c | 38 +-
1 f
From: Sean Wang
MT7530 can treat each port as either VLAN-unware port or VLAN-ware port
through the implementation of port matrix mode or port security mode on
the ingress port, respectively. On one hand, Each port has been acting as
the VLAN-unware one whenever the device is created in the initi
From: Sean Wang
The patchset extends DSA MT7530 to VLAN support through filling required
callbacks in patch 1 and merging the special tag with VLAN tag in patch 2
for allowing that the hardware can handle these packets with VID from the
CPU port.
Sean Wang (3):
net: dsa: mediatek: add VLAN sup
From: Sean Wang
I work for MediaTek and maintain SoC targeting to home gateway and
also will keep extending and testing the function from MediaTek
switch.
Signed-off-by: Sean Wang
---
MAINTAINERS | 7 +++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index c0edf30
From: Sean Wang
MT7530 can treat each port as either VLAN-unaware port or VLAN-aware port
through the implementation of port matrix mode or port security mode on
the ingress port, respectively. On one hand, Each port has been acting as
the VLAN-unaware one whenever the device is created in the in
From: Sean Wang
I work for MediaTek and maintain SoC targeting to home gateway and
also will keep extending and testing the function from MediaTek
switch.
Signed-off-by: Sean Wang
Reviewed-by: Andrew Lunn
---
MAINTAINERS | 7 +++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b
From: Sean Wang
In order to let MT7530 switch can recognize well those egress packets
having both special tag and VLAN tag, the information about the special
tag should be carried on the existing VLAN tag. On the other hand, it's
unnecessary for extra handling for ingress packets when VLAN tag is
From: Sean Wang
Changes since v1:
- fix up the typo
- prefer ordering declarations longest to shortest
- update that vlan_prepare callback should not change any state
- use lower case letter for function naming
The patchset extends DSA MT7530 to VLAN support through filling required
callbacks in
From: Sean Wang
In order to let MT7530 switch can recognize well those egress packets
having both special tag and VLAN tag, the information about the special
tag should be carried on the existing VLAN tag. On the other hand, it's
unnecessary for extra handling for ingress packets when VLAN tag is
From: Sean Wang
I work for MediaTek and maintain SoC targeting to home gateway and
also will keep extending and testing the function from MediaTek
switch.
Signed-off-by: Sean Wang
Reviewed-by: Andrew Lunn
---
MAINTAINERS | 7 +++
1 file changed, 7 insertions(+)
diff --git a/MAINTAINERS b
From: Sean Wang
Changes sicne v2:
update to the latest code base from net-next and fix up all building
errors with -Werror.
Changes since v1:
- fix up the typo
- prefer ordering declarations longest to shortest
- update that vlan_prepare callback should not change any state
- use lower case lett
From: Sean Wang
MT7530 can treat each port as either VLAN-unaware port or VLAN-aware port
through the implementation of port matrix mode or port security mode on
the ingress port, respectively. On one hand, Each port has been acting as
the VLAN-unaware one whenever the device is created in the in
From: Sean Wang
The current solution would setup fixed and force link of 1Gbps to the both
GMAC on the default. However, The GMAC should always be put to link down
state when the GMAC is disabled on certain target boards. Otherwise,
the driver possibly receives unexpected data from the floating h
From: Sean Wang
This patch is the preparation patch in order to adapt into various
hardware through adding platform data which holds specific characteristics
among MediaTek SoCs and introducing the unified clock handler for those
distinct clock requirements depending on different features such as
From: Sean Wang
This patch adds the driver for ethernet controller on MT7622 SoC. It has
the similar handling logic as the previously MT7623 does, but there are
additions against with MT7623 SoC, the shared SGMII given for the dual
GMACs and including 5-ports 10/100 embedded switch support (ESW)
From: Sean Wang
The patch adds the supplements in the dt-binding document for MediaTek
MT7622 SoC with extra SGMII system controller and relevant clock consumers
listed as the requirements for those SoCs equipped with the SGMII circuit.
Also, add the missing binding information for MT7623 SoC her
From: Sean Wang
Sean and Nelson work for MediaTek on maintaining the MediaTek ethernet
driver for the existing SoCs and adding support for the following SoCs.
In the past, Sean has been active at making most of the qualifications
, stress test and submitting a lot of patches for the driver while
From: Sean Wang
Changes since v2:
- update John's mail
Changes since v1:
- add refinement for ethernet clock management
- take out the code block for ESW, add it until ESW driver is actually
introduced
The series adds the driver for ethernet controller found on MT7622 SoC.
There are additions
From: Sean Wang
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicet...@vger.kernel.org
Signed-off-by: Sean Wang
---
.../devicetree/bindings/net/dsa/mt7530.txt | 92 ++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with t
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote
From: Sean Wang
The patch adds the setup for allowing CDM can recognize these packets with
carrying port-distinguishing tag. Otherwise, these tagging packets will be
handled incorrectly by CDM. The setup is working out for general untag
packets as well.
Signed-off-by: Sean Wang
Signed-off-by: L
From: Sean Wang
the patch adds the setup of the corresponding device node of GMAC into the
netdev instance which could allow other modules such as DSA to find the
instance through the node in dt-bindings using of_find_net_device_by_node()
call.
Signed-off-by: Sean Wang
---
drivers/net/ethernet
From: Sean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
Revie
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with t
From: Sean Wang
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicet...@vger.kernel.org
Signed-off-by: Sean Wang
Acked-by: Rob Herring
---
.../devicetree/bindings/net/dsa/mt7530.txt | 92 ++
1 file changed, 92 insertions(+)
create mode 100644 Documentat
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote
From: Sean Wang
the patch adds the setup of the corresponding device node of GMAC into the
netdev instance which could allow other modules such as DSA to find the
instance through the node in dt-bindings using of_find_net_device_by_node()
call.
Signed-off-by: Sean Wang
Reviewed-by: Andrew Lunn
From: Sean Wang
The patch adds the setup for allowing CDM can recognize these packets with
carrying port-distinguishing tag. Otherwise, these tagging packets will be
handled incorrectly by CDM. The setup is also working out for general
untag packets as well.
Signed-off-by: Sean Wang
Signed-off-
From: Sean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
Revie
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with t
From: Sean Wang
the patch adds the setup of the corresponding device node of GMAC into the
netdev instance which could allow other modules such as DSA to find the
instance through the node in dt-bindings using of_find_net_device_by_node()
call.
Signed-off-by: Sean Wang
Reviewed-by: Andrew Lunn
From: Sean Wang
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicet...@vger.kernel.org
Signed-off-by: Sean Wang
Acked-by: Rob Herring
---
.../devicetree/bindings/net/dsa/mt7530.txt | 92 ++
1 file changed, 92 insertions(+)
create mode 100644 Documentat
From: Sean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
Revie
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote
From: Sean Wang
The patch adds the setup for allowing CDM can recognize these packets with
carrying port-distinguishing tag. Otherwise, these tagging packets will be
handled incorrectly by CDM. The setup is also working out for general
untag packets as well.
Signed-off-by: Sean Wang
Signed-off-
From: Sean Wang
Fix inconsistency between the TXD descriptor and the used buffer that
would cause unexpected logic at mtk_tx_unmap() during skb housekeeping.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 17 -
1 file changed, 8 insertions(+), 9 dele
From: Sean Wang
The series fixes kernel BUG caused by inconsistent SKB length reported
into BQL. The reason for inconsistent length comes from hardware BUG which
results in different port number carried on the TXD within the lifecycle of
SKB. So patch 2) is proposed for use a software way to trac
From: Sean Wang
Fix port inconsistency on TXD due to hardware BUG that would cause
different port number is carried on the same TXD between tx_map()
and tx_unmap() with the iperf test. It would cause confusing BQL
logic which leads to kernel panic when dual GMAC runs concurrently.
Signed-off-by:
From: Sean Wang
The patch adds the enhancement for recycling more TX completed SKBs in
one NAPI polling handler if NAPI budgets are still available and hardware
raises status bit shown for certain SKBs are aready done.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c |
From: Sean Wang
Changes since v1:
- fix inconsistent enumeration which easily causes the potential bug
The series fixes kernel BUG caused by inconsistent SKB length reported
into BQL. The reason for inconsistent length comes from hardware BUG which
results in different port number carried on the
From: Sean Wang
Fix inconsistency between the TXD descriptor and the used buffer that
would cause unexpected logic at mtk_tx_unmap() during skb housekeeping.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 17 -
1 file changed, 8 insertions(+), 9 dele
From: Sean Wang
Fix port inconsistency on TXD due to hardware BUG that would cause
different port number is carried on the same TXD between tx_map()
and tx_unmap() with the iperf test. It would cause confusing BQL
logic which leads to kernel panic when dual GMAC runs concurrently.
Signed-off-by:
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote
From: Sean Wang
Add device-tree binding for Mediatek MT7530 switch.
Cc: devicet...@vger.kernel.org
Signed-off-by: Sean Wang
---
.../devicetree/bindings/net/dsa/mt7530.txt | 94 ++
1 file changed, 94 insertions(+)
create mode 100644 Documentation/devicetree/bindings
From: Sean Wang
Allowing CDM can recognize these packets with carrying port-distinguishing
tag when CONFIG_NET_DSA_TAG_MTK is enabled. Otherwise, these packets will
be dropped by CDM ingress.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c |
From: Sean Wang
Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang
Signed-off-by: Landen Chao
---
From: Sean Wang
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with t
On Date: Thu, 25 Aug 2016 15:39:08 +0200, John Crispin wrote:
>Hi Sean, >
>small nitpick inline
>
>On 25/08/2016 12:45, Sean Wang wrote:
>> a lot of parts in the driver uses devm_* APIs to gain benefits from the
>> -eth->mii_bus = mdiobus_alloc();
>> +eth->mii_bus = devm_mdiobus_all
From: Sean Wang
which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.
Signed-off-by: Sean Wang
Acked
From: Sean Wang
return -ENODEV if no child is found in MDIO bus.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ether
From: Sean Wang
This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_et
From: Sean Wang
these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 --
1 file chang
From: Sean Wang
a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1
changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by cor
From: Sean Wang
use skb_free_frag() instead of legacy put_page()
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ether
From: Sean Wang
mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8
1 file changed, 8 insertions(+)
diff --git a/drive
From: Sean Wang
a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.
Using common code provided by the devm_* helps to
1) have simplified the code flow as [1
From: Sean Wang
original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
dif
From: Sean Wang
1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks are
fine
Signed-off-by: Se
From: Sean Wang
a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1
Changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by cor
From: Sean Wang
1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine
Signed-o
From: Sean Wang
a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.
Using common code provided by the devm_* helps to
1) have simplified the code flow as [1
From: Sean Wang
This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_et
From: Sean Wang
which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.
Signed-off-by: Sean Wang
Acked
From: Sean Wang
original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
dif
From: Sean Wang
these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 --
1 file chang
From: Sean Wang
Return -ENODEV if the MDIO bus is disabled in the device tree.
Signed-off-by: Sean Wang
Acked-by: John Crispin
Reviewed-by: Andrew Lunn
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/med
From: Sean Wang
use skb_free_frag() instead of legacy put_page()
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ether
From: Sean Wang
mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8
1 file changed, 8 insertions(+)
diff --git a/drive
From: Sean Wang
these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 --
1 file chang
From: Sean Wang
1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine
Signed-o
From: Sean Wang
a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1
Changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by cor
From: Sean Wang
a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.
Using common code provided by the devm_* helps to
1) have simplified the code flow as [1
From: Sean Wang
Return -ENODEV if the MDIO bus is disabled in the device tree.
Signed-off-by: Sean Wang
Acked-by: John Crispin
Reviewed-by: Andrew Lunn
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/med
From: Sean Wang
use skb_free_frag() instead of legacy put_page()
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
b/drivers/net/ether
From: Sean Wang
which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.
Signed-off-by: Sean Wang
Acked
From: Sean Wang
mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.
Signed-off-by: Sean Wang
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8
1 file changed, 8 insertions(+)
diff --git a/drive
From: Sean Wang
This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_et
From: Sean Wang
original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.
Signed-off-by: Sean Wang
Acked-by: John Crispin
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
dif
1 - 100 of 144 matches
Mail list logo
