Francois Romieu wrote:
> Bram <[EMAIL PROTECTED]> :
> [...]
> > The device now works! But, it still comes up as eth2 instead of eth0,
> > even though it's first detected as eth0. There are no other network
>
> Check the udev rules and/or your init scripts ?
>
You're right, it's a udev script assi
Bram <[EMAIL PROTECTED]> :
[...]
> The device now works! But, it still comes up as eth2 instead of eth0,
> even though it's first detected as eth0. There are no other network
Check the udev rules and/or your init scripts ?
--
Ueimor
-
To unsubscribe from this list: send the line "unsubscribe net
> Please try the patch below on top of 2.6.23-rc2 ?
>
Ok, I did that.
The device now works! But, it still comes up as eth2 instead of eth0,
even though it's first detected as eth0. There are no other network
interfaces according to ifconfig -a.
I've attached the entire dmesg, which ends with me
Bram <[EMAIL PROTECTED]> :
[...]
> The router attached to it indicates a 100mbit link. But that's about it.
> I cannot get any data over it. I can manually configure it to have an IP
> address and netmask, but it won't see anything on the local net. DHCP
> doesn't work either. Nothing out of the or
