Hi Florian,
Thank you for review comments.
On Wed, Feb 01, 2017 at 10:04:08AM -0800, Florian Fainelli wrote:
> EXTERNAL EMAIL
>
>
> On 02/01/2017 04:53 AM, Raju Lakkaraju wrote:
> > From: Raju Lakkaraju
> >
> > LED Mode:
> > Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
> > > +- vsc8531,led-1-mode : LED mode. Specify how the LED[1] should behave.
> > > + Allowed values are define in
> > > + int rc;
> > > +
> > > + if (!of_node)
> > > + return -ENODEV;
> > > +
> > > + rc = of_property_read_u8(of_node, led, &led_mode);
>
Hi Andrew,
Thank you for given review comments.
On Wed, Feb 01, 2017 at 02:55:55PM +0100, Andrew Lunn wrote:
> EXTERNAL EMAIL
>
>
> On Wed, Feb 01, 2017 at 06:23:46PM +0530, Raju Lakkaraju wrote:
> > From: Raju Lakkaraju
> >
> > LED Mode:
> > + "include/dt-bindings/net/ms
On 02/01/2017 04:53 AM, Raju Lakkaraju wrote:
> From: Raju Lakkaraju
>
> LED Mode:
> Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
> status information that can be selected by setting LED mode.
Why is this LED selection done through Device Tree/initial configuration
inste
On Wed, Feb 01, 2017 at 06:23:46PM +0530, Raju Lakkaraju wrote:
> From: Raju Lakkaraju
>
> LED Mode:
> Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
> status information that can be selected by setting LED mode.
>
> LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, l
On Wed, Feb 01, 2017 at 06:23:46PM +0530, Raju Lakkaraju wrote:
> From: Raju Lakkaraju
>
> LED Mode:
> Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
> status information that can be selected by setting LED mode.
>
> LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, l
From: Raju Lakkaraju
LED Mode:
Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
status information that can be selected by setting LED mode.
LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get
from Device Tree.
Signed-off-by: Raju Lakkaraju
---
.../devi
From: Raju Lakkaraju
LED Mode:
Microsemi PHY support 2 LEDs (LED[0] and LED[1]) to display different
status information that can be selected by setting LED mode.
LED Mode parameter (vsc8531, led-0-mode) and (vsc8531, led-1-mode) get from
Device Tree.
Tested on Beaglebone Black with VSC 8531 PHY
