在 2021/2/10 23:26, Colin King 写道:
From: Colin Ian King
Currently function hns3_reset_notify_uninit_enet is returning
the contents of the uninitialized variable ret. Fix this by
removing ret (since it is no longer used) and replace it with
a return of the literal value 0.
you can not remov
在 2020/12/17 16:57, Danielle Ratson 写道:
From: Danielle Ratson
Some speeds can be achieved with different number of lanes. For example,
100Gbps can be achieved using two lanes of 50Gbps or four lanes of
25Gbps. This patch set adds a new selector that allows ethtool to
patch set -> patchset
On 2019/1/1 9:22, dann frazier wrote:
On Mon, Nov 26, 2018 at 06:43:00PM +, Salil Mehta wrote:
From: Peng Li
Port 0/1 of HiP08 supports 10G and 25G. This patch adds a
change to configure NIC port speed same as that of optical
module(SFP/QFSP). Driver gets the optical module speed and
s
On 2018/3/8 13:00, David Miller wrote:
Sorry, this is way too large of a patch series.
Please keep your series to about a dozen or so changes.
Anything longer puts an unreasonable burdon upon patch
reviewers, and such a large series will often make it
so that nearly all reviewers are discoura
On 2018/1/18 22:25, Andrew Lunn wrote:
+static int hclge_set_led_status_phy(struct phy_device *phydev, int value)
+{
+ int ret, cur_page;
+
+ mutex_lock(&phydev->lock);
+
+ ret = phy_read(phydev, HCLGE_PHY_PAGE_REG);
+ if (ret < 0)
+ goto out;
+ else
On 2018/1/12 1:07, David Miller wrote:
From: Peng Li
Date: Thu, 11 Jan 2018 19:45:55 +0800
This patchset adds some new features and fixes some bugs:
[patch 1/11] adds ethtool_ops.get_channels support for VF.
[patch 2/11] removes TSO config command from VF driver.
[patch 3/11] adds ethtool_op
On 2018/1/9 11:06, David Miller wrote:
From: "lipeng (Y)"
Date: Tue, 9 Jan 2018 10:48:04 +0800
So I think it is OK if you can revert [patch 12/20 ]("net: hns3: Add
packet statistics of netdev").
I think it is OK if you send the revert patch, which is what I
am asking
On 2018/1/9 9:54, David Miller wrote:
From: Jakub Kicinski
Date: Mon, 8 Jan 2018 17:50:21 -0800
Oh, I only noticed this extra misleading comment now. Unless each queue
has a netdev, I don't see how these are per-queue.
If it isn't per-queue I want this change reverted.
[patch 12/20 ] add
On 2018/1/5 22:54, Andrew Lunn wrote:
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1126,6 +1126,7 @@ static int hns3_nic_set_features(struct net_device
*netdev,
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
net: hns3: cleanup mac auto-negotiation state query
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
net: hns3: add Asym Pause support to phy default features
Lipeng (14):
net: hns3: add support to query tqps number
net: hns3: add support to modify tqps number
net: hn
This patch adds offload command related to "ethtool -K".
Signed-off-by: Lipeng
Signed-off-by: Jian Shen
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16
drivers/net/ethernet/hisi
This patch adds the support to query tqps number for PF driver
by using ehtool -l command.
Signed-off-by: Lipeng
Signed-off-by: Mingguang Qu
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 10 ++
.../net/ethernet
When auto-negotiation is enabled, the MAC flow control settings is
based on the flow control negotiation result. And it should be configured
after a valid link has been established. This patch adds support to update
flow control settings after auto-negotiation has completed.
Signed-off-by: Lipeng
: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3p
This patch adds the support to change tqps number for PF driver
by using ehtool -L command.
Signed-off-by: Lipeng
Signed-off-by: Mingguang Qu
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h| 3 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c| 122 +
drivers
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.
Fixes: cc9bb43ab394 ("net: hns3: Add tc-based TM support for sriov enabled
port")
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/h
This patch modifies the return data of get_rxnfc, it will return
the current handle's rss_size but not the total tqp number.
because the tc_size has been change to the log2 of roundup
power of two of rss_size.
Signed-off-by: Lipeng
Signed-off-by: Mingguang Qu
---
drivers/net/ethernet/hisi
Add configuration for rss_size_max in hdev but not hardcode it.
Signed-off-by: Lipeng
Signed-off-by: Mingguang Qu
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +-
drivers/net/ethernet/hisilicon/hns3/hns3pf
This patch deals with the vlan tag information between
sk_buff and rx/tx bd.
Signed-off-by: Lipeng
Signed-off-by: Jian Shen
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 83 +++--
1 file changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Lipeng
Signed-off-by: Jian Shen
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 158
This patch adds support for querying advertised pause frame by using
ethtool command(ethtool ethx).
Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Lipeng
Signed-off-by: Fuyun Liang
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h
This patch sets vlan masked, in order to avoid the received
packets being filtered.
Signed-off-by: Lipeng
Signed-off-by: Jian Shen
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 39 +-
2 files changed
tised when the phy
negotiates flow control.
Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff
On 2017/12/21 12:04, David Miller wrote:
From: "lipeng (Y)"
Date: Thu, 21 Dec 2017 09:30:01 +0800
On 2017/12/21 3:28, David Miller wrote:
From: Lipeng
Date: Wed, 20 Dec 2017 16:43:02 +0800
This patchset adds some new feature support and fixes some bugs:
[Patch 1/17 - 5/1
This patch adds set_pauseparam support for ethtool cmd.
Signed-off-by: Lipeng
Signed-off-by: Fuyun Liang
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 83 ++
.../net/ethernet/hisilicon/hns3/hns3pf
-negotiation state query.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 24 --
1 file changed, 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon
This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: Lipeng
Signed-off-by: Mingguang Qu
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4
1 file changed, 4 insertions
Burstiness of a flow is determined by the depth of a bucket, When the
upper rate of shaper is large, the current depth of a bucket is not
enough.
The default upper rate of shaper is 100G, so increase the depth of
a bucket according to UM.
Signed-off-by: Lipeng
Signed-off-by: Yunsheng Lin
On 2017/12/21 3:28, David Miller wrote:
From: Lipeng
Date: Wed, 20 Dec 2017 16:43:02 +0800
This patchset adds some new feature support and fixes some bugs:
[Patch 1/17 - 5/17] add the support to modify/query the tqp number
through ethtool -L/l command, and also fix some related bugs for
On 2017/12/21 3:28, David Miller wrote:
From: Lipeng
Date: Wed, 20 Dec 2017 16:43:02 +0800
This patchset adds some new feature support and fixes some bugs:
[Patch 1/17 - 5/17] add the support to modify/query the tqp number
through ethtool -L/l command, and also fix some related bugs for
This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4
1 file changed, 4 insertions
This patch adds support for querying advertised pause frame by using
ethtool command(ethtool ethx).
Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h
From: qumingguang
Add configuration for rss_size_max in hdev but not hardcode it.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +-
drivers/net/ethernet
tised when the phy
negotiates flow control.
Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff
-negotiation state query.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 24 --
1 file changed, 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon
This patch adds offload command related to "ethtool -K".
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16
drivers/net/ethernet/hisilicon/h
This patch deals with the vlan tag information between
sk_buff and rx/tx bd.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 83 +++--
1 file changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet
: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3p
Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 36 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h| 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c| 4 +++
3 files changed, 41 insertions(+)
diff --git a/drivers/net
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.
Fixes: cc9bb43ab394 ("net: hns3: Add tc-based TM support for sriov enabled
port")
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/h
This patch sets vlan masked, in order to avoid the received
packets being filtered.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 39 +-
2 files changed
Burstiness of a flow is determined by the depth of a bucket, When the
upper rate of shaper is large, the current depth of a bucket is not
enough.
The default upper rate of shaper is 100G, so increase the depth of
a bucket according to UM.
Signed-off-by: Yunsheng Lin
Signed-off-by: Lipeng
This patch adds set_pauseparam support for ethtool cmd.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 83 ++
.../net/ethernet/hisilicon/hns3/hns3pf
This patch adds the support to change tqps number for PF driver
by using ehtool -L command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h| 3 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c| 122 +
drivers
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 158
g auto-negotiation state in hclge_get_autoneg
net: hns3: add Asym Pause support to phy default features
Lipeng (13):
net: hns3: add support to query tqps number
net: hns3: add support to modify tqps number
net: hns3: change the returned tqp number by ethtool -x
net: hns3: Free the ring_da
This patch modifies the return data of get_rxnfc, it will return
the current handle's rss_size but not the total tqp number.
because the tc_size has been change to the log2 of roundup
power of two of rss_size.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisi
This patch adds the support to query tqps number for PF driver
by using ehtool -l command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 10 ++
.../net/ethernet
On 2017/12/20 3:18, David Miller wrote:
From: Lipeng
Date: Tue, 19 Dec 2017 12:02:24 +0800
@@ -2651,6 +2651,19 @@ static int hns3_get_ring_config(struct hns3_nic_priv
*priv)
return ret;
}
+static void hns3_put_ring_config(struct hns3_nic_priv *priv)
+{
+ struct
On 2017/12/20 3:16, David Miller wrote:
From: Lipeng
Date: Tue, 19 Dec 2017 12:02:23 +0800
@@ -5002,6 +5002,26 @@ static void hclge_uninit_ae_dev(struct hnae3_ae_dev
*ae_dev)
ae_dev->priv = NULL;
}
+static u32 hclge_get_max_channels(struct hnae3_handle *han
tised when the phy
negotiates flow control.
Fixes: c4fb2cdf575d ("net: hns3: fix a bug for phy supported feature
initialization")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff
-negotiation state query.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 24 --
1 file changed, 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon
This patch sets vlan masked, in order to avoid the received
packets being filtered.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 39 +-
2 files changed
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.
Fixes: cc9bb43ab394 ("net: hns3: Add tc-based TM support for sriov enabled
port")
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/h
: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3p
This patch adds support for querying advertised pause frame by using
ethtool command(ethtool ethx).
Fixes: 496d03e960ae ("net: hns3: Add Ethtool support to HNS3 driver")
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h
This patch adds offload command related to "ethtool -K".
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16
drivers/net/ethernet/hisilicon/h
Burstiness of a flow is determined by the depth of a bucket, When the
upper rate of shaper is large, the current depth of a bucket is not
enough.
The default upper rate of shaper is 100G, so increase the depth of
a bucket according to UM.
Signed-off-by: Yunsheng Lin
Signed-off-by: Lipeng
This patch deals with the vlan tag information between
sk_buff and rx/tx bd.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 83 +++--
1 file changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 158
This patch adds set_pauseparam support for ethtool cmd.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 83 ++
.../net/ethernet/hisilicon/hns3/hns3pf
This patch adds the support to query tqps number for PF driver
by using ehtool -l command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 10 ++
.../net/ethernet
This patch fixes a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4
1 file changed, 4 insertions
From: qumingguang
Add configuration for rss_size_max in hdev but not hardcode it.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +-
drivers/net/ethernet
This patch add the support to change tqps number for PF driver
by using ehtool -L command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h| 3 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c| 122 +
drivers
Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 36 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h| 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c| 4 +++
3 files changed, 41 insertions(+)
diff --git a/drivers/net
V1 -> V2:
1, fix the comments from Sergei Shtylyov.
---
Fuyun Liang (3):
net: hns3: cleanup mac auto-negotiation state query
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
net: hns3: add Asym Pause support to phy default features
Lipeng (13):
net: hns3: add suppo
This patch modifies the return data of get_rxnfc, it will return
the current handle's rss_size but not the total tqp number.
because the tc_size has been change to the log2 of roundup
power of two of rss_size.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisi
On 2017/12/18 17:08, Sergei Shtylyov wrote:
On 12/18/2017 12:31 PM, Lipeng wrote:
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.
Fixes: cc9bb43 (net: hns3: Add tc-based TM support for sriov
On 2017/12/18 17:07, Sergei Shtylyov wrote:
Hello!
On 12/18/2017 12:31 PM, Lipeng wrote:
From: Fuyun Liang
commit c4fb2cdf575d (net: hns3: fix a bug for phy supported feature
initialization) adds default supported features for phy, but our
hardware
Ten cited commit's summary
This patch add the support to change tqps number for PF driver
by using ehtool -L command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h| 3 +
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c| 122 +
drivers
This patch adds vlan offload config commands, initializes
the rules of tx/rx vlan tag handle for hw.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 45 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 158
This patch fix a memory leak problems in change tqps process,
the function hns3_uninit_all_ring and hns3_init_all_ring
may be called many times.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 4
1 file changed, 4 insertions(+)
diff
This patch add the support to query tqps number for PF driver
by using ehtool -l command.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 10 ++
.../net/ethernet
This patch deals with the vlan tag information between
sk_buff and rx/tx bd.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 83 +++--
1 file changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet
This patch modify the return data of get_rxnfc, it will return
the current handle's rss_size but not the total tqp number.
because the tc_size has been change to the log2 of roundup
power of two of rss_size.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisi
From: qumingguang
Add configuration for rss_size_max in hdev but not hardcode it.
Signed-off-by: qumingguang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 ++
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 6 +-
drivers/net/ethernet
):
net: hns3: cleanup mac auto-negotiation state query
net: hns3: fix for getting auto-negotiation state in hclge_get_autoneg
net: hns3: add Asym Pause support to phy default features
Lipeng (13):
net: hns3: add support to query tqps number
net: hns3: add support to modify tqps number
n
This patch adds offload command related to "ethtool -K".
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 3 +++
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 16
drivers/net/ethernet/hisilicon/h
-negotiation state query.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 24 --
1 file changed, 24 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
b/drivers/net/ethernet/hisilicon
This patch sets vlan masked, in order to avoid the received
packets being filtered.
Signed-off-by: Shenjian
Signed-off-by: Lipeng
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 10 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 39 +-
2 files changed
Burstiness of a flow is determined by the depth of a bucket, When the
upper rate of shaper is large, the current depth of a bucket is not
enough.
The default upper rate of shaper is 100G, so increase the depth of
a bucket according to UM.
Signed-off-by: Yunsheng Lin
Signed-off-by: Lipeng
the phy
negotiates flow control.
Fixes: c4fb2cdf575d (net: hns3: fix a bug for phy supported feature
initialization)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net
Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 36 ++
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.h| 1 +
.../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c| 4 +++
3 files changed, 41 insertions(+)
diff --git a/drivers/net
This patch adds support for querying advertised pause frame by using
ethtool command(ethtool ethx).
Fixes: 496d03e960ae (net: hns3: Add Ethtool support to HNS3 driver)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 ++
drivers
: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_ma
This patch adds set_pauseparam support for ethtool cmd.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 13
.../ethernet/hisilicon/hns3/hns3pf/hclge_main.c| 83 ++
.../net/ethernet/hisilicon/hns3/hns3pf
TC-based sched mode supports SRIOV enabled and SRIOV disabled. This
patch change the TM sched mode to TC-based mode in initialization
process.
Fixes: cc9bb43 (net: hns3: Add tc-based TM support for sriov enabled port)
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf
On 2017/11/8 22:30, Andrew Lunn wrote:
On Wed, Nov 08, 2017 at 03:52:22PM +0800, Lipeng wrote:
From: Fuyun Liang
Driver gets phy address from NCL_config file and uses the phy address
to initialize phydev. There are 5 bits for phy address. And C22 phy
address has 5 bits. So 0-31 are all
.
This patch fixes the phy address to 8 bits, and use 0xff to indicate
invalid phy address.
Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
-negotiation state query in
hclge_update_speed_duplex().
Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 +
1 file change
This patch-set introduces some bug fixes and code improvements.
As [patch 1/2] depends on the patch {5392902 net: hns3: Consistently using
GENMASK in hns3 driver}, which exists in net-next, not exists in net, so
push this serise to nex-next.
Fuyun Liang (2):
{topost} net: hns3: fix a bug when ge
please ignore this patch-set.
I should remove "{topost}" from the subject.
sorry for that, I will resend the patch-set.
On 2017/11/8 15:31, Lipeng wrote:
This patch-set introduces some bug fixes and code improvements.
As [patch 1/2] depends on the patch {5392902 net: hns3: Co
.
This patch fixes the phy address to 8 bits, and use 0xff to indicate
invalid phy address.
Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h
-negotiation state query in
hclge_update_speed_duplex().
Fixes: 46a3df9f9718 (net: hns3: Add HNS3 Acceleration Engine & Compatibility
Layer Support)
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 13 +
1 file change
This patch-set introduces some bug fixes and code improvements.
As [patch 1/2] depends on the patch {5392902 net: hns3: Consistently using
GENMASK in hns3 driver}, which exists in net-next, not exists in net, so
push this serise to nex-next.
Fuyun Liang (2):
{topost} net: hns3: fix a bug when ge
On 2017/11/4 3:52, Florian Fainelli wrote:
On 11/02/2017 09:18 PM, Lipeng wrote:
From: Fuyun Liang
This patch adds set_link_ksettings support for ethtool cmd.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 11
From: Fuyun Liang
This patch adds set_link_ksettings support for ethtool cmd.
Signed-off-by: Fuyun Liang
Signed-off-by: Lipeng
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3
Fuyun Liang
Signed-off-by: Lipeng
---
.../ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c | 30 +++---
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hns3_ethtool.c
This patch-set adds support for set_link_ksettings && for nway_resets
ethtool command and fixes some related ethtool bugs.
1, patch[4/6] adds support for ethtool_ops.set_link_ksettings.
2, patch[5/6] adds support ethtool_ops.for nway_reset.
3, patch[1/6,2/6,3/6,6/6] fix some bugs for getting port i
1 - 100 of 158 matches
Mail list logo
