From: Russell King
Date: Tue, 10 Jul 2018 12:05:36 +0100
> It was been observed that with a particular order of initialisation,
> the netdev can be up, but the SFP module still has its TX_DISABLE
> signal asserted. This occurs when the network device brought up before
> the SFP kernel module has
From: Russell King
Date: Tue, 10 Jul 2018 12:05:31 +0100
> We fail to correctly clean up after a bus registration failure, which
> can lead to an incorrect assumption about the registration state of
> the upstream or sfp cage.
>
> Signed-off-by: Russell King
Applied.
From: Ido Schimmel
Date: Tue, 10 Jul 2018 10:02:56 +0300
> Petr says:
>
> When offloading mirror-to-gretap, mlxsw needs to preroute the path that
> the encapsulated packet will take. That path may include a LAG device
> above a front panel port. So far, mlxsw resolved the path to the first
> up
From: Travis Brown
Date: Tue, 10 Jul 2018 00:35:01 +
> Today macvlan ignores the notification when a lower device goes
> administratively down, preventing the lack of connectivity from
> bubbling up.
>
> Processing NETDEV_DOWN results in a macvlan state of LOWERLAYERDOWN
> with NO-CARRIER wh
From: Jeff Kirsher
Date: Mon, 9 Jul 2018 15:20:35 -0700
> This patch series is meant to allow support for the L2 forward offload, aka
> MACVLAN offload without the need for using ndo_select_queue.
>
> The existing solution currently requires that we use ndo_select_queue in
> the transmit path i
From: Deepti Raghavan
Date: Mon, 9 Jul 2018 17:53:39 +
> Congestion control algorithms, which access the rate sample
> through the tcp_cong_control function, only have access to the maximum
> of the send and receive interval, for cases where the acknowledgment
> rate may be inaccurate due to
Signed-off-by: Constantine Shulyupin
---
scripts/tags.sh | 1 +
1 file changed, 1 insertion(+)
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 66f08bb1cce9..db0d56ebe9b9 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -152,6 +152,7 @@ regex_asm=(
)
regex_c=(
'/^SYSCALL_DEFIN
From: Vlad Buslov
Date: Mon, 9 Jul 2018 20:26:47 +0300
> Fix action attribute size calculation function to take rcu read lock and
> access act_cookie pointer with rcu dereference.
>
> Fixes: eec94fdb0480 ("net: sched: use rcu for action cookie update")
> Reported-by: Marcelo Ricardo Leitner
>
From: Rahul Lakkireddy
Date: Mon, 9 Jul 2018 21:42:45 +0530
> Some stats are fetched via slow firmware mailbox, which can cause
> packet drops under heavy load. So, this series removes these stats
> from ethtool -S and expose them via debugfs.
>
> Patch 1 removes stats fetched via firmware from
From: Vlad Buslov
Date: Mon, 9 Jul 2018 14:33:26 +0300
> Free params if tcf_idr_check_alloc() returned error.
>
> Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
> Reported-by: Dan Carpenter
> Signed-off-by: Vlad Buslov
Applied.
From: Ganesh Goudar
Date: Mon, 9 Jul 2018 16:52:03 +0530
> From: Arjun Vynipadath
>
> congestion argument passed to t4_sge_alloc_rxq() is used
> to differentiate between nic/ofld queues.
>
> Signed-off-by: Arjun Vynipadath
> Signed-off-by: Ganesh Goudar
Applied.
From: Sabrina Dubroca
Date: Mon, 9 Jul 2018 12:25:13 +0200
> This series fixes bugs in handling of the addr_gen_mode option, mainly
> related to the sysctl. A minor netlink issue was also present in the
> initial commit introducing the option on a per-netdevice basis.
>
> v2: add patch 4, reque
From: David Miller
Date: Wed, 11 Jul 2018 22:46:58 -0700 (PDT)
> From: NeilBrown
> Date: Fri, 06 Jul 2018 17:08:35 +1000
>
>>
>> Some users of rhashtable might need to change the key
>> of an object and move it to a different location in the table.
>> Other users might want to allocate objects
From: Jianbo Liu
Date: Mon, 9 Jul 2018 02:26:20 +
> Zahari issued tc vlan command without setting vlan_ethtype, which will
> crash kernel. To avoid this, we must check tb[TCA_FLOWER_KEY_VLAN_ETH_TYPE]
> is not null before use it.
> Also we don't need to dump vlan_ethtype or cvlan_ethtype in
The variable 'decrypted' in 'struct tls_sw_context_rx' is redundant and
is being set/unset without purpose. Simplified the code by removing it.
Signed-off-by: Vakul Garg
---
include/net/tls.h | 1 -
net/tls/tls_sw.c | 87 ---
2 files changed,
❦ 11 juillet 2018 21:01 -0400, David Ahern :
>> +++ b/ip/ipaddress.c
>> @@ -837,11 +837,6 @@ int print_linkinfo(const struct sockaddr_nl *who,
>> if (!name)
>> return -1;
>>
>> -if (filter.label &&
>> -(!filter.family || filter.family == AF_PACKET) &&
>> -
From: "Li,Rongqing"
Date: Thu, 12 Jul 2018 03:03:51 +
>
>
>> -邮件原件-
>> 发件人: David Miller [mailto:da...@davemloft.net]
>> 发送时间: 2018年7月12日 10:49
>> 收件人: Li,Rongqing
>> 抄送: netdev@vger.kernel.org
>> 主题: Re: [PATCH] net: convert gro_count to bitmask
>>
>> From: Li RongQing
>> Date:
In preparation for support of simultaneous driver and hardware XDP
support add per-mode attributes. The catch-all IFLA_XDP_PROG_ID
will still be reported, but user space can now also access the
program ID in a new IFLA_XDP__PROG_ID attribute.
Signed-off-by: Jakub Kicinski
Reviewed-by: Quentin Mo
Split the query of HW-attached program from the software one.
Introduce new .ndo_bpf command to query HW-attached program.
This will allow drivers to install different programs in HW
and SW at the same time. Netlink can now also carry multiple
programs on dump (in which case mode will be set to
XD
Basic operations drivers perform during xdp setup and query can
be moved to helpers in the core. Encapsulate program and flags
into a structure and add helpers. Note that the structure is
intended as the "main" program information source in the driver.
Most drivers will additionally place the pro
Allow netdevsim to accept driver and offload attachment of XDP
BPF programs at the same time.
Signed-off-by: Jakub Kicinski
Reviewed-by: Quentin Monnet
---
drivers/net/netdevsim/bpf.c | 32 +++--
drivers/net/netdevsim/netdev.c | 3 +-
drivers/net/ne
Split handling of offloaded and driver programs completely. Since
offloaded programs always come with XDP_FLAGS_HW_MODE set in reality
there could be no sharing, anyway, programs would only be installed
in driver or in hardware. Splitting the handling allows us to install
programs in HW and in dr
Hi!
This set is adding support for loading driver and offload XDP
at the same time. This enables advanced use cases where some
of the work is offloaded to the NIC and some is done by the host.
Separate netlink attributes are added for each mode of operation.
Driver callbacks for offload are clean
Add tests for having an XDP program attached in the driver and
another one attached in HW simultaneously.
Signed-off-by: Jakub Kicinski
Reviewed-by: Quentin Monnet
---
tools/testing/selftests/bpf/test_offload.py | 63 +
1 file changed, 63 insertions(+)
diff --git a/tools/te
prog_attached of struct netdev_bpf should have been superseded
by simply setting prog_id long time ago, but we kept it around
to allow offloading drivers to communicate attachment mode (drv
vs hw). Subsequently drivers were also allowed to report back
attachment flags (prog_flags), and since nowad
> -邮件原件-
> 发件人: Eric Dumazet [mailto:eric.duma...@gmail.com]
> 发送时间: 2018年7月11日 19:32
> 收件人: Li,Rongqing ; netdev@vger.kernel.org
> 主题: Re: [PATCH] net: convert gro_count to bitmask
>
>
>
> On 07/11/2018 02:15 AM, Li RongQing wrote:
> > gro_hash size is 192 bytes, and uses 3 cache line
> -邮件原件-
> 发件人: David Miller [mailto:da...@davemloft.net]
> 发送时间: 2018年7月12日 10:49
> 收件人: Li,Rongqing
> 抄送: netdev@vger.kernel.org
> 主题: Re: [PATCH] net: convert gro_count to bitmask
>
> From: Li RongQing
> Date: Wed, 11 Jul 2018 17:15:53 +0800
>
> > + clear_bit(index, &napi
From: Li RongQing
Date: Wed, 11 Jul 2018 17:15:53 +0800
> + clear_bit(index, &napi->gro_bitmask);
Please don't use atomics here, at least use __clear_bit().
This is why I did the operations by hand in my version of the patch.
Also, if you are going to preempt my patch, at least reta
On 06/26/2018 10:18 AM, Ian Lance Taylor wrote:
> I'm reporting what appears to be a bug in the Linux kernel's epoll
> support. It seems that epoll appears to sometimes fail to report an
> EPOLLOUT event when the other side of an AF_UNIX/SOCK_DGRAM socket is
> closed. This bug report started a
> -邮件原件-
> 发件人: Stefano Brivio [mailto:sbri...@redhat.com]
> 发送时间: 2018年7月11日 18:52
> 收件人: Li,Rongqing
> 抄送: netdev@vger.kernel.org; Eric Dumazet
> 主题: Re: [PATCH] net: convert gro_count to bitmask
>
> On Wed, 11 Jul 2018 17:15:53 +0800
> Li RongQing wrote:
>
> > @@ -5380,6 +5382,12
On Mon, Jul 09, 2018 at 11:44:38PM +0300, Vlad Buslov wrote:
>
> On Mon 09 Jul 2018 at 20:34, Marcelo Ricardo Leitner
> wrote:
> > On Mon, Jul 09, 2018 at 08:26:47PM +0300, Vlad Buslov wrote:
> >> Fix action attribute size calculation function to take rcu read lock and
> >> access act_cookie poi
On 7/11/18 7:36 AM, Vincent Bernat wrote:
> diff --git a/ip/ipaddress.c b/ip/ipaddress.c
> index 5009bfe6d2e3..20ef6724944e 100644
> --- a/ip/ipaddress.c
> +++ b/ip/ipaddress.c
> @@ -837,11 +837,6 @@ int print_linkinfo(const struct sockaddr_nl *who,
> if (!name)
> return -1;
>
On 7/9/18 7:56 PM, Jesus Sanchez-Palencia wrote:
> fixes since v3:
> - Add support for clock names with the "CLOCK_" prefix;
> - Print clock name on print_opt();
> - Use strcasecmp() instead of strncasecmp().
>
>
> The ETF (earliest txtime first) qdisc was recently merged into net-next
> [1],
Sync BPF_SOCK_OPS_TCP_LISTEN_CB related UAPI changes to tools/.
Signed-off-by: Andrey Ignatov
Acked-by: Alexei Starovoitov
---
tools/include/uapi/linux/bpf.h | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 59b19b6a40d7
This patchset adds TCP-BPF callback for listening sockets.
Patch 0001 provides more details and is the main patch in the set.
Patch 0006 adds selftest for the new callback.
Other patches are bug fixes and improvements in TCP-BPF selftest to make it
easier to extend in 0006.
Andrey Ignatov (6):
Add new TCP-BPF callback that is called on listen(2) right after socket
transition to TCP_LISTEN state.
It fills the gap for listening sockets in TCP-BPF. For example BPF
program can set BPF_SOCK_OPS_STATE_CB_FLAG when socket becomes listening
and track later transition from TCP_LISTEN to TCP_CLOS
Cover new TCP-BPF callback in test_tcpbpf: when listen() is called on
socket, set BPF_SOCK_OPS_STATE_CB_FLAG so that BPF_SOCK_OPS_STATE_CB
callback can be called on future state transition, and when such a
transition happens (TCP_LISTEN -> TCP_CLOSE), track it in the map and
verify it in user space
Switch to cgroup_helpers to simplify the code and fix cgroup cleanup:
before cgroup was not cleaned up after the test.
It also removes SYSTEM macro, that only printed error, but didn't
terminate the test.
Signed-off-by: Andrey Ignatov
Acked-by: Alexei Starovoitov
---
tools/testing/selftests/bp
Reduce amount of copy/paste for debug info when result is verified in
the test and keep that info together with values being checked so that
they won't get out of sync.
It also improves debug experience: instead of checking manually what
doesn't match in debug output for all fields, only unexpecte
Lack of const in cgroup helpers signatures forces to write ugly client
code. Fix it.
Signed-off-by: Andrey Ignatov
Acked-by: Alexei Starovoitov
---
tools/testing/selftests/bpf/cgroup_helpers.c | 6 +++---
tools/testing/selftests/bpf/cgroup_helpers.h | 6 +++---
2 files changed, 6 insertions(+),
Hello, We offer L oans at 3% interest rate per annum. If intereted, contact me
with amount needed and L oan duration for more details...
On Wed, Jul 11, 2018 at 10:12:48AM +0200, Magnus Karlsson wrote:
> This patch set adjusts the AF_XDP TX error reporting so that it becomes
> consistent between copy mode and zero-copy. First some background:
>
> Copy-mode for TX uses the SKB path in which the action of sending the
> packet is perf
You will be blocked from sending and receiving emails Dear @Pen Webmail Email
User
This message is from Information Technology Services of This EMAIL to all
our Staff. We are currently upgrading our database and e-mail center and
this is our final notification to you. We have sent several messages
On Wed, Jul 11, 2018 at 3:23 PM, Michal Soltys wrote:
>
> Hi,
>
> As weird as that sounds, this is what I observed today after bumping
> kernel version. I have a setup where 2 bonds are attached to linux
> bridge and physically are connected to two switches doing MSTP (and
> linux bridge is just p
On Wed, Jul 11, 2018 at 03:30:14PM +0200, Daniel Borkmann wrote:
> sykzaller triggered several panics similar to the below:
>
> [...]
> [ 248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90
> [ 248.857656] Read of size 985 at addr 88080172 by task a.out/1425
> [...]
Starting with the following net-next commit, I see a BUG when starting a
LXD container inside of a KVM guest using virtio-net:
d4546c2509b1 net: Convert GRO SKB handling to list_head.
Here's what the kernel spits out:
kernel BUG at /var/scm/kernel/linux/include/linux/skbuff.h:2080!
invalid o
Hi,
As weird as that sounds, this is what I observed today after bumping
kernel version. I have a setup where 2 bonds are attached to linux
bridge and physically are connected to two switches doing MSTP (and
linux bridge is just passing them).
Initially I suspected some changes related to bridge
On 11.07.2018 23:33, Florian Fainelli wrote:
>
>
> On 07/11/2018 02:08 PM, Heiner Kallweit wrote:
>> On 11.07.2018 22:55, Andrew Lunn wrote:
+/**
+ * phy_speed_down - set speed to lowest speed supported by both link
partners
+ * @phydev: the phy_device struct
+ * @sync:
On 07/11/2018 02:08 PM, Heiner Kallweit wrote:
> On 11.07.2018 22:55, Andrew Lunn wrote:
>>> +/**
>>> + * phy_speed_down - set speed to lowest speed supported by both link
>>> partners
>>> + * @phydev: the phy_device struct
>>> + * @sync: perform action synchronously
>>> + *
>>> + * Description
On 11.07.2018 22:55, Andrew Lunn wrote:
>> +/**
>> + * phy_speed_down - set speed to lowest speed supported by both link
>> partners
>> + * @phydev: the phy_device struct
>> + * @sync: perform action synchronously
>> + *
>> + * Description: Typically used to save energy when waiting for a WoL pack
On 07/11/2018 01:30 PM, Heiner Kallweit wrote:
> This functionality will also be needed in subsequent patches of this
> series, therefore factor it out to a helper.
>
> Signed-off-by: Heiner Kallweit
Reviewed-by: Florian Fainelli
--
Florian
> +/**
> + * phy_speed_down - set speed to lowest speed supported by both link partners
> + * @phydev: the phy_device struct
> + * @sync: perform action synchronously
> + *
> + * Description: Typically used to save energy when waiting for a WoL packet
> + */
> +int phy_speed_down(struct phy_device
On Wed, Jul 11, 2018 at 10:30:27PM +0200, Heiner Kallweit wrote:
> This functionality will also be needed in subsequent patches of this
> series, therefore factor it out to a helper.
>
> Signed-off-by: Heiner Kallweit
Reviewed-by: Andrew Lunn
Andrew
On Tue, Jul 10, 2018 at 9:22 PM, Jakub Kicinski
wrote:
> From: Pieter Jansen van Vuuren
>
> Extend tc tunnel_key action unit tests with geneve options. Tests
> include testing single and multiple geneve options, as well as
> testing geneve options that are expected to fail.
>
> Signed-off-by: Pie
On 07/10/2018 09:20 PM, Daniel Borkmann wrote:
> On 07/10/2018 06:54 PM, Mathieu Xhonneux wrote:
>> bpf_lwt_seg6_* helpers require CONFIG_IPV6_SEG6_BPF, and currently
>> return -EOPNOTSUPP to indicate unavailability. This patch forces the
>> BPF verifier to reject programs using these helpers when
Some network drivers include functionality to speed down the PHY when
suspending and just waiting for a WoL packet because this saves energy.
This functionality is quite generic, therefore let's factor it out to
phylib.
Signed-off-by: Heiner Kallweit
---
drivers/net/phy/phy.c | 78 ++
❦ 11 juillet 2018 13:03 -0700, Stephen Hemminger :
>> Since 9516823051ce, "ip addr show label lo:1" doesn't work
>> anymore (doesn't show any address, despite a matching label).
>> Reverting to return 0 instead of -1 fix the issue.
>>
>> However, the condition says: "if we filter by label [...]
This functionality will also be needed in subsequent patches of this
series, therefore factor it out to a helper.
Signed-off-by: Heiner Kallweit
---
drivers/net/phy/phy.c | 13 +
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy
Some network drivers include functionality to speed down the PHY when
suspending and just waiting for a WoL packet because this saves energy.
This patch is based on our recent discussion about factoring out this
functionality to phylib. First user will be the r8169 driver.
Heiner Kallweit (2):
On Wed, 11 Jul 2018 16:41:35 +0100
Edward Cree wrote:
> On 11/07/18 16:01, Jesper Dangaard Brouer wrote:
> > In commit 5fa12739a53d ("net: ipv4: listify ip_rcv_finish") calling
> > dst_input(skb) was split-out. The ip_sublist_rcv_finish() just calls
> > dst_input(skb) in a loop.
> >
> > The prob
On 07/10/2018 11:42 PM, Jakub Kicinski wrote:
> Hi!
>
> This series starts with two minor clean ups to test_offload.py
> selftest script.
>
> The next 11 patches extend the abilities of bpftool prog load
> beyond the simple cgroup use cases. Three new parameters are
> added:
>
> - type - allow
On Wed, 11 Jul 2018 19:05:20 +
Saeed Mahameed wrote:
> On Wed, 2018-07-11 at 17:01 +0200, Jesper Dangaard Brouer wrote:
> > Only driver sfc actually uses this, but I don't have this NIC, so I
> > tested this on mlx5, with my own changes to make it use
> > netif_receive_skb_list(),
> > but I'm
On Wed, Jul 11, 2018 at 07:45:11PM +0200, Linus Walleij wrote:
> By a simple extension of of_phy_get_and_connect() drivers
> that have a fixed link on e.g. RGMII can support also
> fixed links, so in addition to:
>
> ethernet-port {
> phy-mode = "rgmii";
> phy-handle = <&foo>;
> };
>
On Tue, 10 Jul 2018 20:21:11 -0700, Okash Khawaja wrote:
> + if (err || btf_info.btf_size > last_size) {
> + err = errno;
errno may not be set in case btf_info.btf_size > last_size
errno is positive, while other error return codes are negative.
> + goto exit_free;
> +
On Wed, 11 Jul 2018 13:36:03 +0200
Vincent Bernat wrote:
> Since 9516823051ce, "ip addr show label lo:1" doesn't work
> anymore (doesn't show any address, despite a matching label).
> Reverting to return 0 instead of -1 fix the issue.
>
> However, the condition says: "if we filter by label [...]
On Wed, Jul 11, 2018 at 09:32:42PM +0200, Linus Walleij wrote:
> Switch over to using a module parameter and debug prints
> that can be controlled by this or ethtool like everyone
> else. Depromote all other prints to debug messages.
>
> The phy_print_status() was already in place, albeit never
>
On Wed, Jul 11, 2018 at 09:32:45PM +0200, Linus Walleij wrote:
> The hardware supposedly handles frames up to 10236 bytes and
> implements .ndo_change_mtu() so accept 10236 minus the ethernet
> header for a VLAN tagged frame on the netdevices. Use
> ETH_MIN_MTU as minimum MTU.
>
> Signed-off-by: L
The decrypted bit is propogated to cloned/copied skbs.
This will be used later by the inline crypto receive side offload
of tls.
Signed-off-by: Boris Pismenny
Signed-off-by: Ilya Lesokhin
---
include/linux/skbuff.h | 7 ++-
net/core/skbuff.c | 6 ++
2 files changed, 12 insertions(+
This patch fixes the byte count indication in CQE for processed IPsec
packets that contain a metadata header.
Signed-off-by: Boris Pismenny
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.c | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_rxtx.h | 2 +-
drivers/net/e
Add new netdev tls op for resynchronizing HW tls context
Signed-off-by: Boris Pismenny
---
include/linux/netdevice.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b683971..0434df3 100644
--- a/include/linux/netdevice.h
+++ b/inc
We currently have no devices that support both TLS and IPsec using the
accel framework, and the current code does not support both IPsec and
TLS. This patch prevents such combinations.
Signed-off-by: Boris Pismenny
---
drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 1 +
1 file changed, 1 inse
Hello,
syzbot found the following crash on:
HEAD commit:0026129c8629 rhashtable: add restart routine in rhashtable..
git tree: net
console output: https://syzkaller.appspot.com/x/log.txt?x=10b7ced040
kernel config: https://syzkaller.appspot.com/x/.config?x=b88de6eac8694da6
dashboa
Implement the TLS rx offload data path according to the
requirements of the TLS generic NIC offload infrastructure.
Special metadata ethertype is used to pass information to
the hardware.
When hardware loses synchronization a special resync request
metadata message is used to request resync.
Sig
This patch enables TLS Rx based on available HW capabilities.
Signed-off-by: Boris Pismenny
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c | 18 --
1 file changed, 16 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c
b
For symmetry, we rename tls_offload_context to
tls_offload_context_tx before we add tls_offload_context_rx.
Signed-off-by: Boris Pismenny
---
.../net/ethernet/mellanox/mlx5/core/en_accel/tls.h | 6 +++---
include/net/tls.h | 16 +++---
net/tls/tls_device
This patch adds common functions to handle mellanox metadata headers.
These functions are used by IPsec and TLS to process FPGA metadata.
Signed-off-by: Boris Pismenny
---
.../net/ethernet/mellanox/mlx5/core/accel/accel.h | 37 ++
.../mellanox/mlx5/core/en_accel/ipsec_rxtx.c
For symmetry, we rename mlx5e_tls_offload_context to
mlx5e_tls_offload_context_tx before we add mlx5e_tls_offload_context_rx.
Signed-off-by: Boris Pismenny
Reviewed-by: Aviad Yehezkel
Reviewed-by: Tariq Toukan
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c | 2 +-
drivers/net/
Previously, decrypt_skb also updated the TLS context.
Now, decrypt_skb only decrypts the payload using the current context,
while decrypt_skb_update also updates the state.
Later, in the tls_device Rx flow, we will use decrypt_skb directly.
Signed-off-by: Boris Pismenny
---
include/net/tls.h |
This patch allows tls_set_sw_offload to fill the context in case it was
already allocated previously.
We will use it in TLS_DEVICE to fill the RX software context.
Signed-off-by: Boris Pismenny
---
net/tls/tls_sw.c | 34 ++
1 file changed, 22 insertions(+), 12 de
This patch splits tls_sw_release_resources_rx into two functions one
which releases all inner software tls structures and another that also
frees the containing structure.
In TLS_DEVICE we will need to release the software structures without
freeeing the containing structure, which contains other
zerocopy_from_iter iterates over the message, but it doesn't revert the
updates made by the iov iteration. This patch fixes it. Now, the iov can
be used after calling zerocopy_from_iter.
Fixes: 3c4d75591 ("tls: kernel TLS support")
Signed-off-by: Boris Pismenny
---
net/tls/tls_sw.c | 1 +
1 file
From: Ilya Lesokhin
This patch adds a netdev feature to configure TLS RX inline crypto offload.
Signed-off-by: Ilya Lesokhin
Signed-off-by: Boris Pismenny
---
include/linux/netdev_features.h | 2 ++
net/core/ethtool.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/include/
Hi,
The following series provides TLS RX inline crypto offload.
v2->v3:
- Fix typo
- Adjust cover letter
- Fix bug in zero copy flows
- Use network byte order for the record number in resync
- Adjust the sequence provided in resync
v1->v2:
- Fix bisectability problems due
This patch adds software statistics for TLS to count important
events.
Signed-off-by: Boris Pismenny
---
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.c | 3 +++
drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls.h | 4
drivers/net/ethernet/mellanox/mlx5/core/en_accel/t
Add the mlx5 implementation of the TLS Rx routines to add/del TLS
contexts, also add the tls_dev_resync_rx routine
to work with the TLS inline Rx crypto offload infrastructure.
Signed-off-by: Boris Pismenny
Signed-off-by: Ilya Lesokhin
---
.../net/ethernet/mellanox/mlx5/core/en_accel/tls.c | 46
This patch completes the generic infrastructure to offload TLS crypto to a
network device. It enables the kernel to skip decryption and
authentication of some skbs marked as decrypted by the NIC. In the fast
path, all packets received are decrypted by the NIC and the performance
is comparable to pl
In Innova TLS, TLS contexts are added or deleted
via a command message over the SBU connection.
The HW then sends a response message over the same connection.
Complete the implementation for Innova TLS (FPGA-based) hardware by
adding support for rx inline crypto offload.
Signed-off-by: Boris Pism
Hello,
syzbot found the following crash on:
HEAD commit:30c2c32d7f70 Merge tag 'drm-fixes-2018-07-10' of git://ano..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=1662c5b240
kernel config: https://syzkaller.appspot.com/x/.config?x=25856fac4e580aa7
da
Prevent coalescing of decrypted and encrypted SKBs in GRO
and TCP layer.
Signed-off-by: Boris Pismenny
Signed-off-by: Ilya Lesokhin
---
net/ipv4/tcp_input.c | 12
net/ipv4/tcp_offload.c | 3 +++
2 files changed, 15 insertions(+)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_
The initialization sequence for the ethernet, setting up
interrupt routing and such things, need to be done after
both the ports are clocked and reset. Before this the
config will not "take". Move the initialization to the
port probe function and keep track of init status in
the state.
Signed-off-
Switch over to using a module parameter and debug prints
that can be controlled by this or ethtool like everyone
else. Depromote all other prints to debug messages.
The phy_print_status() was already in place, albeit never
really used because the debuglevel hiding it had to be
set up using ethtool
The code was not tested with two ports actually in use at
the same time. (I blame this on lack of actual hardware using
that feature.) Now after locating a system using both ports,
add necessary fix to make both ports come up.
Signed-off-by: Linus Walleij
---
ChangeLog v2->v3:
- No changes, just
The hardware supposedly handles frames up to 10236 bytes and
implements .ndo_change_mtu() so accept 10236 minus the ethernet
header for a VLAN tagged frame on the netdevices. Use
ETH_MIN_MTU as minimum MTU.
Signed-off-by: Linus Walleij
---
ChangeLog v2->v3:
- No changes, just resending with the r
The code to calculate the hardware register enumerator
for the maximum L3 length isn't entirely simple to read.
Use the existing defines and rewrite the function into a
table look-up.
Acked-by: Michał Mirosław
Signed-off-by: Linus Walleij
---
ChangeLog v2->v3:
- Collected Michał's ACK.
ChangeLog
On Tue, Jul 10, 2018 at 07:25:53PM -0700, Cong Wang wrote:
> On Mon, Jul 9, 2018 at 2:40 PM Marcelo Ricardo Leitner
> wrote:
> >
> > On Mon, Jul 09, 2018 at 05:03:31PM -0400, Michel Machado wrote:
> > >Changing TC_PRIO_MAX from 15 to 63 risks breaking backward
> > > compatibility
> > > with a
On Wed, Jul 4, 2018 at 10:35 PM Andrew Lunn wrote:
>
> On Wed, Jul 04, 2018 at 08:33:24PM +0200, Linus Walleij wrote:
> > The hardware supposedly handles frames up to 10236 bytes and
> > implements .ndo_change_mtu() so accept 10236 minus the ethernet
> > header for a VLAN tagged frame on the netde
On Wed, 2018-07-11 at 17:01 +0200, Jesper Dangaard Brouer wrote:
> Only driver sfc actually uses this, but I don't have this NIC, so I
> tested this on mlx5, with my own changes to make it use
> netif_receive_skb_list(),
> but I'm not ready to upstream the mlx5 driver change yet.
Thanks Jesper fo
On Wed, 11 Jul 2018 13:43:01 +0300, Alex Vesker wrote:
> + DEVLINK_ATTR_REGION_SIZE, /* u32 */
> + err = nla_put_u64_64bit(msg, DEVLINK_ATTR_REGION_SIZE,
> + region->size,
> + DEVLINK_ATTR_PAD);
Size in the comment look
On Tue, Jul 10, 2018 at 07:32:43PM -0700, Cong Wang wrote:
> On Mon, Jul 9, 2018 at 12:53 PM Marcelo Ricardo Leitner
> wrote:
> >
> > On Mon, Jul 09, 2018 at 02:18:33PM -0400, Michel Machado wrote:
> > >
> > >2. sch_prio.c does not have a global limit on the number of packets on
> > > all its
By a simple extension of of_phy_get_and_connect() drivers
that have a fixed link on e.g. RGMII can support also
fixed links, so in addition to:
ethernet-port {
phy-mode = "rgmii";
phy-handle = <&foo>;
};
This setup with a fixed-link node and no phy-handle will
now also work just f
1 - 100 of 181 matches
Mail list logo
