Re: [Mailman-Users] wrapper issue

Mark Sapiro wrote: > >The list-name in the message you sent me ends in -admin. This is the >problem. > > >Your Mailman router in Exim doesn't work with list names that end with >'-admin' or probably any of the other suffixes '-bounces', '-confirm', >'-join', '-leave', '-owner', '-request', '-subscr

Re: [Mailman-Users] wrapper issue

On Mon, Feb 01, 2010 at 02:24:26PM -0800, Mark Sapiro wrote: > The list-name in the message you sent me ends in -admin. This is the > problem. I came up with a work-around for this, once, but on a box I've since decommissioned. > Your Mailman router in Exim doesn't work with list names that end w

Re: [Mailman-Users] wrapper issue

Hicks, Robert CTR wrote: > >> >>Your message did not reach some or all of the intended recipients. >> >> Subject:Test message only >> Sent: 2/1/2010 9:40 AM >> >>The following recipient(s) cannot be reached: >> >> em...@address on 2/1/2010 9:42 AM >>The e-ma

Re: [Mailman-Users] wrapper issue

-Original Message- > >Your message did not reach some or all of the intended recipients. > > Subject: Test message only > Sent:2/1/2010 9:40 AM > >The following recipient(s) cannot be reached: > > em...@address on 2/1/2010 9:42 AM >The e-mail account does

Re: [Mailman-Users] wrapper issue

Hicks, Robert CTR wrote: >I changed mailman to use an aliases file (/etc/mail/mailman-aliases) which is >owned by root:mailman. > >I get the following, which I didn't get when the aliases where being managed >by Exim itself. > > >Group mismatch error. Mailman expected the mail wrapper scri

[Mailman-Users] wrapper issue

I changed mailman to use an aliases file (/etc/mail/mailman-aliases) which is owned by root:mailman. I get the following, which I didn't get when the aliases where being managed by Exim itself. Group mismatch error. Mailman expected the mail wrapper script to be executed as group "mailm

[Mailman-Users] wrapper busted

I've got an old install (2.10.12) where, while mail to the lists goes thru, the daily reminders do not ie the cron /usr/local/bin/python -S /fs/mailman/cron/checkdbs produces ...to="|/fs/mailman/mail/wrapper mailowner mylist", ctladdr=<[EMAIL PROTECTED]> (1/0), delay=00:00:01, xdelay=00:00:00,

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Simon White wrote: > Postfix, by default, would use postdrop as the group for most stuff; > this is described in the Postfix install instructions. > > Mailman, by default, would use the group mailman. > > However I really think you are going to need to

Re: [Mailman-Users] wrapper script run as nogroup

26-Nov-03 at 08:57, Jeremy Gilbert ([EMAIL PROTECTED]) wrote : > > The wrapper script will run as the GID that it was compiled to > > run as; this has nothing whatsoever to do with Postfix. > > > > You'll have to recompile Mailman with the correct --with-mail-gid > > option. The option to give to

RE: [Mailman-Users] wrapper script run as nogroup

> The wrapper script will run as the GID that it was compiled to run as; > this has nothing whatsoever to do with Postfix. > > The postfix-users list will just tell you to come back here, I expect. > > You'll have to recompile Mailman with the correct --with-mail-gid > option. The option to give

Re: [Mailman-Users] wrapper script run as nogroup

25-Nov-03 at 12:32, Todd ([EMAIL PROTECTED]) wrote : > > Yes, I saw that, and I followed those instructions, but until I > > changed the ownership of /etc/aliases and /etc/postfix/aliases* > > the wrapper was still being run as gid "nogroup". I think the > > documentation should be changed to also

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Gilbert wrote: >> Well, README.POSTFIX does say this: >> >> Make sure that the owner of the data/aliases and >> data/aliases.db file is `mailman' and that the group owner >> for those files is `mailman'. E.g.: >> >> % su

RE: [Mailman-Users] wrapper script run as nogroup

> Well, README.POSTFIX does say this: > > Make sure that the owner of the data/aliases and data/aliases.db > file is `mailman' and that the group owner for those files is > `mailman'. E.g.: > > % su > % chown mailman:mailman data/aliases* Yes, I saw that, and I fol

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Gilbert wrote: > Okay, great. I'm not sure about your explanation, but when I > changed all the aliases and aliases.db files on my system to > mailman:mailman ownership, everything is finally working. By your > explanation, Postfix must be run

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Richard Barrett wrote: > On 24 Nov 2003, at 17:25, Todd wrote: >> What are the perms on /usr/local/mailman/mail/mailman? Postfix >> should be executing the script as whatever group the wrapper has. > > Your interpretation is not quite correct. > > Whe

RE: [Mailman-Users] wrapper script run as nogroup

> Your interpretation is not quite correct. > > When it is run, and as a security precaution, the mailman wrapper > checks the group of the process which is executing it is what it > expects and then and only then runs the mail delivery script with the > mailman gid. This expected gid is compil

Re: [Mailman-Users] wrapper script run as nogroup

On 24 Nov 2003, at 17:25, Todd wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Gilbert wrote: I'm having a hell of a time getting this working, but I keep coming back to this problem. I get this back whenever I send e-mail to a list address. <[EMAIL PROTECTED]>: Command died with stat

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Gilbert wrote: > >> What are the perms on /usr/local/mailman/mail/mailman? Postfix >> should be executing the script as whatever group the wrapper has. [...] > -rwxr-sr-x1 mailman mailman 37699 Nov 24 10:38 > /usr/local/mailman/mail/m

RE: [Mailman-Users] wrapper script run as nogroup

> > What are the perms on /usr/local/mailman/mail/mailman? Postfix should > be executing the script as whatever group the wrapper has. > > - -- > ToddOpenPGP -> KeyID: 0xD654075A | URL: www.pobox.com/~tmz/pgp -rwxr-sr-x1 mailman mailman 37699 Nov 24 10:38 /usr/local/mailman/

Re: [Mailman-Users] wrapper script run as nogroup

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Jeremy Gilbert wrote: > I'm having a hell of a time getting this working, but I keep > coming back to this problem. I get this back whenever I send > e-mail to a list address. > > <[EMAIL PROTECTED]>: Command died with status 2: > "/usr/local/mail

[Mailman-Users] wrapper script run as nogroup

I'm having a hell of a time getting this working, but I keep coming back to this problem. I get this back whenever I send e-mail to a list address. <[EMAIL PROTECTED]>: Command died with status 2: "/usr/local/mailman/mail/mailman post test". Command output: Group mismatch error. Mailman

[Mailman-Users] wrapper configuration pb.

hello, I've one problem with the wrapper. When I use the command : /usr/lib/mailman/mail/wrapper post list-toto the log is : "Cannot read wrapper configuration file." What's the solution ? I can't find it. I use mailman 2.0.13-60 with postfix. alex. ---

Re: [Mailman-Users] Wrapper Not Working

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 SoloCDM wrote: >- Transcript of session follows - > Failure to exec script. WANTED gid 65534, GOT gid 12. (Reconfigure > to take 12?) > 554 5.3.0 unknown mailer error 2 [...] > Where did I go wrong? You need to reconfigure mailman to use

[Mailman-Users] wrapper returning '6' ... what does this mean?

I am trying to use exim with mailman. I've followed the directions at http://mail.python.org/pipermail/mailman-users/2002-November/ 024041.html , but changing MAILMAN_WRAP=/usr/local/mailman/mail/wrapper to MAILMAN_WRAP=/var/mailman/mail/mailman and changing the various instances of config.

RE : [Mailman-Users] wrapper executing, but doing NOTHING

I've got same problem, did you found some solutions ??? -Message d'origine- De : Joel Glickman [mailto:[EMAIL PROTECTED] Envoyé : jeudi 5 décembre 2002 15:43 À : [EMAIL PROTECTED] Objet : [Mailman-Users] wrapper executing, but doing NOTHING - Running RH7.2, sendmail, mail

[Mailman-Users] Wrapper does not seem to do anything.

Greetings. I receive an email which I pass to the mailman wrapper with the following command: cat reply1.txt | /var/mailman/mail/wrapper mailcmd testa reply1.txt is a text file containing the message of a reply to a subscribtion notice. But wrapper does not seem to do anything. The use

Re: [Mailman-Users] wrapper executing, but doing NOTHING

Joel Glickman wrote: > Anyone have any advice? I've RTFM'd and think I've done everything right? You didn't RTFM the ENTIRE installation file. Nowhere do you mention anything of the crontab that you're supposed to install for Mailman to work. -- H | I haven't lost my mind; it's backed up o

[Mailman-Users] wrapper executing, but doing NOTHING

- Running RH7.2, sendmail, mailman 2.0.12 - mailman user & group exist -- /home/mailman exists with correct permissions - ./configure --with-mail-gid=mail --with-cgi-gid=apache, (When configuration script runs, it properly converts mail to 12 and apache to 48, which reflect what's in my /etc/gr

Re: [Mailman-Users] wrapper executing, but doing NOTHING - SOLVED

Well, the problem is solved. I said that I RTFM'd and did everything correctly. Well ... I did, in terms of configuring and installing the mailman binaries .. my problem is that I didn't read the whole manual .. I missed this line -- - IMPERATIVE! IMPORTANT! DO THIS! YOU'LL BE SORRY IF YOU

[Mailman-Users] wrapper executing, but doing NOTHING

- Running RH7.2, sendmail, mailman 2.0.12 - mailman user & group exist -- /home/mailman exists with correct permissions - ./configure --with-mail-gid=mail --with-cgi-gid=apache, (When configuration script runs, it properly converts mail to 12 and apache to 48, which reflect what's in my /etc/gr

[Mailman-Users] Wrapper Does Not Send Mail

Hi Guys The wrapper is not sending mail to the users right away. I get digested messages, even though my settings say otherwise. There is no error in the maillog, it says message sent. But if I look at logs from mailman it’s a different story --Post Log Nov 11 12:28:02 2002 (30098) po

[Mailman-Users] wrapper posting to list dies "status:1"

Someone remind me how to fix this... MM 2.1b3/postfix mta getting this error after what looked like a sucessful upgrade... -- Command died with status 1: "/var/www/mailman/mail/wrapper post camelid" Medical Fact: Realistic expectation can provide complete relief from frequent disappointment.

Re: [Mailman-Users] wrapper not available for sendmail?

On Mon, 15 Jul 2002, Philip White wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > I created the a "etc-officers" mailing list, but when I try to subscribe > to it from a different e-mail address, here's what I get in response to > my confirmation reply: > > > ~ - The followi

Re: [Mailman-Users] wrapper not available for sendmail?

- Original Message - From: "Philip White" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 16, 2002 12:48 AM Subject: [Mailman-Users] wrapper not available for sendmail? > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > I created

[Mailman-Users] wrapper not available for sendmail?

-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I created the a "etc-officers" mailing list, but when I try to subscribe to it from a different e-mail address, here's what I get in response to my confirmation reply: ~ - The following addresses had permanent fatal errors - "|/home/mailma

[Mailman-Users] Wrapper woes

Ok, it took a good bit of tinkering, but I managed to get exim and mailman installed and working... almost. So far, everything works up untill I try to join a list. I get the email to verify, I reply, but then "Mail Delivery System" from my server computer sends me an email saying... This messa

Re: [Mailman-Users] Wrapper

On Tue, Jun 11, 2002 at 01:49:18PM -0400, Tracy Snell wrote: > Just needed to install the cron jobs. Didn't realize they were needed for > delivery. All is well now. Running virtual domains, it all is working as > advertised. What do you mean? I executed crontab crontab.in and when I check crons

[Mailman-Users] wrapper program

I installed mailman on our web server ( that is configured also like mail server). Everything looks OK. When i try to send a message to a mailinglist I get: list_name... aliased to :|export/mailman/mail/wrapper post name_lis" "|/export/mailman/mail/wrapper post list_name"... Connecting to prog

Re: [Mailman-Users] Wrapper

On Tuesday 25 June 2002 04:14 pm, Gour wrote: > On Tue, Jun 11, 2002 at 01:49:18PM -0400, Tracy Snell wrote: > > Just needed to install the cron jobs. Didn't realize they were needed for > > delivery. All is well now. Running virtual domains, it all is working as > > advertised. > > What do you me

Re: [Mailman-Users] Wrapper

On Tue, Jun 11, 2002 at 01:49:18PM -0400, Tracy Snell wrote: > Just needed to install the cron jobs. Didn't realize they were needed for > delivery. All is well now. Running virtual domains, it all is working as > advertised. What do you mean? I executed: crontab crontab.in and when I check cron

[Mailman-Users] wrapper from mailman

Hello My name is Camelia Botez and I'm system admin in Weizmann Institute. I installed mailman on our web server that runs also like mail server. Everything looks nice but when I send mail to one of the lists ,I don't get any error message , but the mail doesn't go to the users from the list.

Re: [Mailman-Users] Wrapper

On 6/11/02 1:35 PM, "Gour" <[EMAIL PROTECTED]> wrote: > I can just confirm that I have the same problem, but so far didn't get > any reply hot to resolve it. > > I also have Mailman 2.0.11 plus htdig patch. Just needed to install the cron jobs. Didn't realize they were needed for delivery. All

RE: [Mailman-Users] Wrapper problems

Did you setup your Aliases? :) Jim Hale --- http://hale.dyndns.org -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tracy Snell Sent: Tuesday, June 11, 2002 9:18 AM To: [EMAIL PROTECTED] Subject: [Mailman-Users] Wrapper problems I just installed

Re: [Mailman-Users] Wrapper

On Tuesday 11 June 2002 10:25 am, Tracy Snell wrote: > I just installed mailman. Perms check out OK. Web interface works fine. I > go to the subscribe page and sign up for my test list. I get the e-mail. > When I reply to it Postfix shows that it's delivered to wrapper with no > error. From there

Re: [Mailman-Users] Wrapper problems

On Tue, Jun 11, 2002 at 10:18:28AM -0400, Tracy Snell wrote: > > I just installed mailman. Perms check out OK. Web interface works fine. I go > to the subscribe page and sign up for my test list. I get the e-mail. When I > reply to it Postfix shows that it's delivered to wrapper with no error. Fr

[Mailman-Users] Wrapper problems

I just installed mailman. Perms check out OK. Web interface works fine. I go to the subscribe page and sign up for my test list. I get the e-mail. When I reply to it Postfix shows that it's delivered to wrapper with no error. From there it disappears. No error in any logs that I can find. /home/m

[Mailman-Users] Wrapper

I just installed mailman. Perms check out OK. Web interface works fine. I go to the subscribe page and sign up for my test list. I get the e-mail. When I reply to it Postfix shows that it's delivered to wrapper with no error. From there it disappears. No error in any logs that I can find. /home/m

Re: [Mailman-Users] wrapper error

Did you run newaliases after adding the wrapper aliases to your /etc/aliases file? -ben On Thu, May 09, 2002 at 10:07:53PM -0700, David Burrows wrote: > Please help a new kid on the block.. > I have Mailman GUI working fine, but get the following message when I try to > subscribe or send any ma

Re: [Mailman-Users] wrapper error

On Thu, May 09, 2002 at 10:07:53PM -0700, David Burrows wrote: > Please help a new kid on the block.. > I have Mailman GUI working fine, but get the following message when I try to > subscribe or send any mail to the list.. > > The following addresses had permanent fatal errors - > "|/var/ma

[Mailman-Users] wrapper error

Please help a new kid on the block.. I have Mailman GUI working fine, but get the following message when I try to subscribe or send any mail to the list.. The following addresses had permanent fatal errors - "|/var/mailman/mail/wrapper mail" (expanded from: <[EMAIL PROTECTED]>) tia, Davi

Re: [Mailman-Users] wrapper

At 05:59 PM 4/23/02 +0200, E.J.L. Kemper wrote: >Ok, you got a point there! > >So I reinstalled it again. > >./configure no errors. > >but make install, after a very close look gave this... >snip- > >make[1]: Entering directory `/unpack/mailman-2.0.9/src' >gcc -c -I. -DPREFIX="\"/home/ma

Re: [Mailman-Users] wrapper

- Original Message - From: "Ron Jarrell" <[EMAIL PROTECTED]> To: "E.J.L. Kemper" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, April 22, 2002 8:10 PM Subject: Re: [Mailman-Users] wrapper > At 11:24 AM 4/22/02 +0200, E.J.L. Kemper wrote: &g

Re: [Mailman-Users] wrapper

At 11:24 AM 4/22/02 +0200, E.J.L. Kemper wrote: >Hi again, > >I am using 2.09 BTW > >I re-installed the whole program several times, starting with MAKE CLEAN >then removing the directory. >So really from scratch? Did you also delete everything under /home/mailman? What are you feeding a

Re: [Mailman-Users] wrapper

Hi again, I am using 2.09 BTW I re-installed the whole program several times, starting with MAKE CLEAN then removing the directory. So really from scratch? > Then > reinstall. Because the error below is very self explanatory - an essential > piece of mailman simply isn't where you to

Re: [Mailman-Users] wrapper

At 05:29 PM 4/20/02 +0200, E.J.L. Kemper wrote: >Hi everyone, > >can anyone please tell me what I should do when I see this? Honestly, what you need to do is delete your installed mailman config, (save mm_cfg.py if you edited it), and go through and reverify your settings to configure. Verify

[Mailman-Users] wrapper

Hi everyone, can anyone please tell me what I should do when I see this? snip--- Traceback (innermost last): File "bin/check_perms", line 281, in ? checkmail() File "bin/check_perms", line 202, in checkmail mode = statmode(wrapper) File "bin/check_perms", line 74, in statm

[Mailman-Users] Wrapper and SMRSH???

Hi there! I'm a total newbie, the newest kind... I installed Mailman under Netmax-linux (Based on RH6) and got the follwing problem, which I even found in the FAQ: Problem: I send mail to the list, and get back mail saying, sh: wrapper not available for sendmail programs Solution: Your syste

[Mailman-Users] wrapper

Hi, am I missing something? in $prefix, wrapper is not made by MAKE INSTALL ?? I am trying to install Mailman 2.09. Greetings Erik -- Mailman-Users mailing list [EMAIL PROTECTED] http://mail.python.org/mailman/listinfo/mailman-user

Re: [Mailman-Users] wrapper seems to not be sgid'ing..

On Tue, 12 Feb 2002, Mark Ash wrote: > Am trying to run mailman v2.0.8 with postfix on SuSE v7.2. Am getting > the error at the bottom of the page. I've rebuilt, installed and > configured mailman. I built it using the correct gid values for mail > and cgi. > I ran the check_perms and when it

[Mailman-Users] wrapper seems to not be sgid'ing..

Title: wrapper seems to not be sgid'ing.. Am trying to run mailman v2.0.8 with postfix on SuSE v7.2. Am getting the error at the bottom of the page. I've rebuilt, installed and configured mailman. I built it using the correct gid values for mail and cgi. I ran the check_perms and when it's

[Mailman-Users] Wrapper problems (I think)

Title: Wrapper problems (I think) (This may be a repeat of a repeat :-), since I got another bounce notification, excuse me if this is the case) Hi all, I am quite new to mailman, but an experienced mailing list admin. I have been running MJ for a couple of years and I now want to move on

[Mailman-Users] Wrapper problem (?)

Title: Wrapper problem (?) (This may be a repeat, since I got a bounce notification, excuse me if this is the case) Hi all, I am quite new to mailman, but an experienced mailing list admin. I have been running MJ for a couple of years and I now want to move on to MM. [ I am not sure I am

[Mailman-Users] wrapper

Title: wrapper Hi all, I am quite new to mailman, but an experienced mailing list admin. I have been running MJ for a couple of years and I now want to move on to MM. [ I am not sure I am allowed to use the s u b s c r i b e   or  u n s u b   words here, some lists have low tolerance to adm

Re[2]: [Mailman-Users] wrapper does not exist in mailman-2.1a4 ???

On Wed, 16 Jan 2002 12:58:47 -0500 Jon Parise <[EMAIL PROTECTED]> wrote: > > Sorry, but I don't understand what you want to say with: > > s/wrapper/mailman/ > > Replace /home/mailman/mail/wrapper with > /home/mailman/mail/mailman in your aliases file. > > Jon Parise ([EMAIL PROTECTED]) . In

Re: [Mailman-Users] wrapper does not exist in mailman-2.1a4 ???

On Wed, Jan 16, 2002 at 03:50:35PM -0200, Ana Paula wrote: > > > run /home/mailman/mail/wrapper: file does not exist > > > > s/wrapper/mailman/ > > Sorry, but I don't understand what you want to say with: > s/wrapper/mailman/ Replace /home/mailman/mail/wrapper with /home/mailman/mail/mailma

Re[2]: [Mailman-Users] wrapper does not exist in mailman-2.1a4 ???

On Wed, 16 Jan 2002 12:51:04 -0500 Jon Parise <[EMAIL PROTECTED]> wrote: > > <[EMAIL PROTECTED]>: > > preline: fatal: unable to > > run /home/mailman/mail/wrapper: file does not exist > > s/wrapper/mailman/ > > Jon Parise ([EMAIL PROTECTED]) . Information Technology (2001) > http://www.c

Re: [Mailman-Users] wrapper does not exist in mailman-2.1a4 ???

On Wed, Jan 16, 2002 at 03:21:47PM -0200, Ana Paula wrote: > I have installed mailman-2.1a4 from CVS and all > appears to work ok, but now, I send a message to the > list and I get the follow error: [snip] > <[EMAIL PROTECTED]>: > preline: fatal: unable to > run /home/mailman/mail/wrapper

[Mailman-Users] wrapper does not exist in mailman-2.1a4 ???

I have installed mailman-2.1a4 from CVS and all appears to work ok, but now, I send a message to the list and I get the follow error: Hi. This is the qmail-send program at myhost.com. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanen

Re: [Mailman-Users] wrapper issues..

On 05 October 2001, stormlrd said: > Hi, > > Logfile : > " ** [EMAIL PROTECTED] D=list_request_director > T=list_request_transport: Child process of list_request_transport transport > returned 2 from command: /home/mailman/mail/wrapper " > > I do not know what "returned 2" means... therefo

Re: [Mailman-Users] wrapper issues..

> Hi, > > Logfile : > " ** [EMAIL PROTECTED] D=list_request_director > T=list_request_transport: Child process of list_request_transport transport > returned 2 from command: /home/mailman/mail/wrapper " There's almost certainly a corresponding error in ~mailman/logs/error --

[Mailman-Users] wrapper issues..

Hi, Logfile : " ** [EMAIL PROTECTED] D=list_request_director T=list_request_transport: Child process of list_request_transport transport returned 2 from command: /home/mailman/mail/wrapper " I do not know what "returned 2" means... therefore no idea on how to fix... I'm using exim + mail

[Mailman-Users] wrapper help

mailman-2.0.5.tar.gz Python 1.5.2 (#1, Feb 1 2000, 16:32:16) mta - right now Sendmail, will be iPlanet Messaging Server os - Linux I ran configure with --with-mail-gid and set correctly, after not doing that the first time. :) The problem I'm having is that mail addressed to [EMAIL PROTECT

RE: [Mailman-Users] Wrapper me this

> -Original Message- > From: Shannon Anderson [mailto:[EMAIL PROTECTED]] > OK I got the list-request wrapper to work by creating a Alias to it in > sendmail > > ("logical" not exact wordings) > > list-request = Sendtoprogram /etc/smrsh/mailman_wrapper > mailcmd listname > > and no

[Mailman-Users] Wrapper me this

OK I got the list-request wrapper to work by creating a Alias to it in sendmail ("logical" not exact wordings) list-request = Sendtoprogram /etc/smrsh/mailman_wrapper mailcmd listname and now do the same thing but change mailcmd to post? for the "listname" wrapper. Now is there a way built i

[Mailman-Users] wrapper problems

Hi all, First time caller longtime listener, Well... Not really but ok... I am having some wrapper problems as it seems send mail dose not like the way I have it setup I suspect that I have a argument missing. Quote from email:-- The following addresses had permanent fatal errors -

Re: [Mailman-Users] wrapper not available for sendmail programs?

Your sendmail is configured to use smrsh (likely via your sendmail.mc and hence sendmail.cf), and your cgi wrapper for mailman isn't included in the directory that holds executables allowed to run under smrsh. There are basically 2 ways to get around thisdisable smrsh in sendmail (not

[Mailman-Users] wrapper not available for sendmail programs?

hello all,   i've installed mailman, it seem working fine until i send a message to my mailing list, then i got this error message back, =   - The following addresses had permanent fatal errors -"|/home/mailman/mail/wrapper post mylist2"    (reason: service unavailable)    (e

[Mailman-Users] Wrapper/Mail UID help with v2.0.3

I've just installed version 2.0.3 and was well impressed with just how easy the install was: second time lucky after having to readjust the GID for my apache web server, but that's one hell of a lot quicker than when I attempted majordomo. I do need some help however: I still have majordomo insta

Re: [Mailman-Users] Wrapper gets wrong HOME directory

> It seems that wrapper is looking for /home/mailman/post in > /usr/local/majordomo and is obviously having problems. Why would it be doing > this and how do I fix it? > > See README.SENDMAIL: -- For example, if you've installed Mailman in the standard location, you can just execute these com

[Mailman-Users] Wrapper gets wrong HOME directory

I get the following error message bouncing back when I try to post or subscribe to a mailing list I set up on a Cobalt server. It is compliled to use a local version of Perl 6 and is also compiled with a prefix. It seems that wrapper is looking for /home/mailman/post in /usr/local/majordomo and i

[Mailman-Users] Wrapper problem...

I'm working on a new mailman & qmail install. I've got everything pretty much down except for this. I did configure mailman with group 1, but its still giving this errorany help will be greatly appreciated. Thanks! Chris Mar 13 13:01:05 -hostmame qmail: 984506465.629587 starting delivery

[Mailman-Users] Wrapper problem

I'm working on a new mailman & qmail install.  I've got everything pretty much down except for this.   I did configure mailman with group 1, but its still giving this errorany help will be greatly appreciated.   Thanks!   Chris   Mar 13 13:01:05 -hostmame qmail: 984506465.629587 startin

[Mailman-Users] wrapper: -password +confirmation

I'm sure you're sick of hearing this already, but I'm attempting a wrapper for mailman using procmail and perl (and MySQL, working on not *needing* MySQL). I've got a preliminary thing which DOES NOT WORK and should not even be released yet. If anyone wants a look, get