Louis M. wrote:
>
>All digests include the email information for each email such as:
>
>
>Where can I go to remove it. Even if it is a global change.
see the mm_cfg.py options MIME_DIGEST_KEEP_HEADERS and
PLAIN_DIGEST_KEEP_HEADERS (described in Defaults.py).
--
Mark Sapiro <[EMAIL PROTECTED]>
On Apr 28, 2006, at 10:32 AM, Louis M. wrote:
> I apologize if this has been asked before, but I have googled day
> in and day
> out so, if you could point me in the right direction:
>
> All digests include the email information for each email such as:
>
> Message: 1
> Date: Tue, 25 A
I apologize if this has been asked before, but I have googled day in and day
out so, if you could point me in the right direction:
All digests include the email information for each email such as:
Message: 1
Date: Tue, 25 Apr 2006 09:57:37 -0400
From: Apache <[EMAIL PROTE
On Sep 1, 2005, at 9:23 AM, David Gordon wrote:
> I'd like to clean up the digests my lists send. I wonder how to do
> remove
> the "Message-ID:" and "Content-Type:" from the digest messages I
> send?
From Defaults.py:
==
# Headers which should be kept in both RFC 1153 (plain) and MIM
A typical Mailman list digest will start each post message with the following:
Message: 1
Date: Wed, 24 Aug 2005 17:49:01 -0500
From: List Subscriber <[EMAIL PROTECTED]>
Subject: Re: [listname] A clever subject line
To: [EMAIL PROTECTED]
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; ch
I've got a problem where sometimes the headers to the list get
slightly munched. I've got a two line header for the non-digest
messages. The second line is equal signs used as underscore.
The setting:
Header added to mail sent to regular list members
has as its value
Undercover -
At 12:16 PM -0500 2004-07-15, <[EMAIL PROTECTED]> wrote:
So here is my question: with Mailman can the script be set to display
the individual's e-mail address on the "to" field?
Mailman is capable of doing a certain amount of message
personalization, if you enable the features. However, there
I am currently running an announce list via Smartlist. The "to" field on the
recipient's e-mail is the name of the list (just like on this Mailman discussion list).
So here is my question: with Mailman can the script be set to display the
individual's e-mail address on the "to" field?
In othe
On Tue, Jul 06, 2004 at 07:45:56AM -0400, Mike Phillips wrote:
> You're right, it works fine. (Sorry, I never used it before so I overlooked
> it.) The problem now is, when I send to the list, the header displays
> correctly, but the incoming message is sent as an attachment, even though
> I'm send
OTECTED]>
To: "Mike Phillips" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, July 06, 2004 3:45 AM
Subject: Re: [Mailman-Users] Headers and Footers - Need Help
On Mon, Jul 05, 2004 at 07:55:37PM -0400, Mike Phillips wrote:
Is there a way to have a standar
t;From" line to get rid of the "On behalf of"
language?
Thanks,
Mike
- Original Message -
From: "Jim Tittsler" <[EMAIL PROTECTED]>
To: "Mike Phillips" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, July 06, 2004 3:45 AM
Sub
On Mon, Jul 05, 2004 at 07:55:37PM -0400, Mike Phillips wrote:
> Is there a way to have a standard amount of text as a header such that the
> information contained in the incoming email is appended to the header and,
> in fact, appears as a footer?
That sounds exactly like what the msg_header opti
(Sorry if this post is a repeat. The first time I posted it, it never showed up on my
computer.)
I need to set up a mailing list with the following characteristics. I'm not
sure if MailMan can handle it.
1. Email sent to [EMAIL PROTECTED] (no problem)
2. List sends emails to 55 recipients. (no p
At 9:09 AM +0200 2004/05/13, Hans Gubitz wrote:
He would send his confirming to
[EMAIL PROTECTED], but not to
[EMAIL PROTECTED]
What is setup wrong?
Note that lists.gym-nippes.dnsalias.org is a CNAME alias to
gym-nippes.dnsalias.org. This causes problems because the SMTP mail
RFCs require
mailman 2.1.4 is running. Users can mail to different lists.
mailman is running on bluecherweb with the exim3
local_domains=...;gym-nippes.dnsalias.org
In mm_config.py I have: DEFAULT_EMAIL_HOST = 'lists.gym-nippes.dnsalias.org'
I have some problems with headers in emails from -bounces.
When a
Hello-
In the digests for my list, I am getting unwanted
headers, i.e.
To: [To header omitted]
Message-ID:
<[EMAIL PROTECTED]>
Content-Type: text/plain; charset="us-ascii";
format=flowed
I placed the following in mm_cfg.py:
MIME_DIGEST_KEEP_HEADERS = ['message', 'date', 'from',
'subject']
PLAIN
I've just upgraded to mailman 2.1.1, specifically because I need the
ability to disable
the list-* headers (or some of them, at any rate). I was kind of
worried to see in the help
for that option the fact that it "might be going away".
Please don't.
Some of the lists we run are compulsory annou
On Thu, 28 Nov 2002 20:53:00 -0800
Felix F <[EMAIL PROTECTED]> wrote:
> Can anyone tell me how to remove the headers Mailman places into a
> sent out e-mail? I'm specifically talking about headers such as:
Please see the FAQ:
http://www.python.org/cgi-bin/faqw-mm.py
--
J C Lawrence
In the "General Options" section of the list, set
"Should messages from this mailing list include the RFC 2369 (i.e. List-*)
headers?"
to "No".
This may not be in pre-2.1 versions.
- Stoney
On 11/28/02 11:53 PM, "Felix F." <[EMAIL PROTECTED]> wrote:
> Hello,
>
> Can anyone tell me how to r
Hello,
Can anyone tell me how to remove the headers Mailman places
into a sent out e-mail? I’m specifically talking about headers such as:
List-Unsubscribe: ,
List-Id:
List-Post:
List-Help:
List-Subscribe: ,
List-Archive:
--
On 4/19/02 8:53 AM, "Jon Carnes" <[EMAIL PROTECTED]> wrote:
> Makes you kind of want to create a "Meta" admin page with some standard
> setups like Announce-only list, etc.
Or write up faqs/howtos on how to configure specific standard list styles?
Maybe an operators manual of some sort?
--
Ch
> "JC" == Jon Carnes <[EMAIL PROTECTED]> writes:
JC> Makes you kind of want to create a "Meta" admin page with some
JC> standard setups like Announce-only list, etc.
What I have in mind for MM-after-2.1 is to allow the creation of "list
styles" which can be easily applied to any par
Makes you kind of want to create a "Meta" admin page with some standard
setups like Announce-only list, etc.
--
Mailman-Users mailing list
[EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
Mailman FAQ: http://www.pytho
> "CVR" == Chuq Von Rospach <[EMAIL PROTECTED]> writes:
CVR> On 4/8/02 9:59 AM, "Dave Sherohman" <[EMAIL PROTECTED]>
CVR> wrote:
>> OK, I'll give you that List-Post: isn't applicable to your
>> list.
CVR> And I believe in 2.1, mailman won't include headers that
CVR>
On Tue, Apr 09, 2002 at 02:32:14PM +0100, robin szemeti wrote:
> if you and a couple of others have this great 'problem' with headers (which
> are not normally seen unless you specifically ask for 'all headers' in your
> mail client anyway [1])
Depends on the MUA. The great source of annoyance
At 14:32 +0100 4/9/02, robin szemeti wrote:
>On Monday 08 April 2002 17:38, David wrote:
>> just think that the way they say
>> that leaving the headers in is following standards and that there is no
>> option to remove them is absurd especially when that is not wht he
>> standards say.
>
>'no
On Mon, 8 Apr 2002 09:38:23 -0700 (PDT)
jebva wrote:
> I just think that the way they say that leaving the headers in is
> following standards and that there is no option to remove them is
> absurd especially when that is not wht he standards say.
RFC2369 states that they are optional.
Stand
On 4/8/02 9:59 AM, "Dave Sherohman" <[EMAIL PROTECTED]> wrote:
> OK, I'll give you that List-Post: isn't applicable to your list.
And I believe in 2.1, mailman won't include headers that aren't relevant to
a list, so an announce-only list won't get list-post. Barry? Is that true? I
know we talke
On Sat, Apr 06, 2002 at 10:24:56PM -0800, David wrote:
> The debate goes on I know, but here is exactly why these excessive
> headers suck. I want to set up a news list not a discussion list. The
> only person who will be able to post is the list owner. I don't need
> all the junk about ho
--- Chris Hedemark <[EMAIL PROTECTED]> wrote:
> On Sun, 2002-04-07 at 01:24, David wrote:
> > The debate goes on I know, but here is exactly why these
> excessive
> > headers suck. I want to set up a news list not a discussion list.
>
> [lots of whining deleted]
>
> Maybe you selected th
--- "Ashley M. Kirchner" <[EMAIL PROTECTED]> wrote:
> David wrote:
>
> > Why the folks who designed this
> > are on such a power trip over something that damn near renders
> their
> > product useless is beyond me.
> > I have tried the edits I have been given to nuke these absurd
> > headers
On Sun, 2002-04-07 at 01:24, David wrote:
> The debate goes on I know, but here is exactly why these excessive
> headers suck. I want to set up a news list not a discussion list.
[lots of whining deleted]
Maybe you selected the wrong tool for the job?
MySQL, Postfix, Apache and a tiny bi
On 4/7/02 5:30 PM, "J C Lawrence" <[EMAIL PROTECTED]> wrote:
> Have you considered that perhaps Mailman is just not for you?
Nope. Not relevant. Don't inject facts into a rant.
--
Chuq Von Rospach, Architech
[EMAIL PROTECTED] -- http://www.chuqui.com/
The first rule of holes: If you are in o
David wrote:
> Why the folks who designed this
> are on such a power trip over something that damn near renders their
> product useless is beyond me.
> I have tried the edits I have been given to nuke these absurd
> headers but so far none of them work. It would be of great benefit if
> the
On Sat, 6 Apr 2002 22:24:56 -0800 (PST)
jebva wrote:
> Why the folks who designed this are on such a power trip over
> something that damn near renders their product useless is beyond me.
Have you considered that perhaps Mailman is just not for you?
--
J C Lawrence
-
The debate goes on I know, but here is exactly why these excessive
headers suck. I want to set up a news list not a discussion list. The
only person who will be able to post is the list owner. I don't need
all the junk about how to post to the list on top of each mail since it
is WRONG for
On Fri, 29 Mar 2002 19:22:05 -0500
David Boothe <[EMAIL PROTECTED]> wrote:
> I like some of the features of MailMan a lot but all those headers
> just have to go!
Have you checked the FAQ?
http://www.python.org/cgi-bin/faqw-mm.py
--
J C Lawrence
-(*)
Hi all. I am new to MailMan from the majordomo world. I like some of the
features of MailMan a lot but all those headers just have to go! heck for
many of my subscribers this makes it so they have to scroll off the page to
see the message. Thats a real pain! Not only that but I have two li
Is there a method to get rid of all the helpful headers sent on each
message. With tiny lists, it takes up a great deal of room.
Don
--
Mailman-Users maillist - [EMAIL PROTECTED]
http://mail.python.org/mailman/listinfo/mailman-users
We are using our ISP's copy of Mailman. Each message includes several
headers we would like to remove -- can this be done by individual
list managers? If not, is there any reason we should not run our own
copy of Mailman?
AB
--
Mailman-User
[EMAIL PROTECTED] said:
> I have configured the software fine and can send out mails without any
> problems, however is there a way to change the 'Return-Path' and 'To'
> headers.
It should be fairly easy to modify To (remember that you probably also
need to hit Cc, Bcc, Resent-* etc), probabl
Hi,
Our company has just started to use Mailman for the first time, and
unfortunately none of us are familiar with Python. So what I was wondering
was whether anyone could explain, in fairly simple terms, how we may be able
to do the following:
I have configured the software fine and can send o
42 matches
Mail list logo
