Re: [Mailman-Users] Digests not being sent, accumulating instead

Thank you for your suggestion. I ran the 'senddigests' command on the list and the digest was delivered successfully. No errors. On Thu, Jul 20, 2017 at 9:38 AM, Mark Sapiro wrote: > On 07/20/2017 09:16 AM, Christopher Adams wrote: > > > > I noticed that a list dige

[Mailman-Users] Digests not being sent, accumulating instead

digest.mbox has accumulated since 7/16 til the present. I would appreciate any ideas about what might be happening and how to resolve it. Many thanks, Christopher Adams -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman

Re: [Mailman-Users] attachements scrubbed, but list doesn't use Content Filtering

Sorry, I was a bit premature in my question. Apparently, an admin with little knowledge of the settings had toggled the non_digest settings to scrub everything. I missed that setting after going through it several times. On Tue, Jul 18, 2017 at 1:42 PM, Christopher Adams wrote: > Hello

[Mailman-Users] attachements scrubbed, but list doesn't use Content Filtering

behavior. What am I missing here ? Many thanks, Christopher Adams -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http

Re: [Mailman-Users] Remove pending requests from one address for all lists

Thank you, Mark. This is very helpful. On Feb 15, 2017 2:45 PM, "Mark Sapiro" wrote: > On 02/15/2017 12:03 PM, Christopher Adams wrote: > > > > Is there a way to remove pending requests from a specific address for all > > lists ? Our system periodically is flo

[Mailman-Users] Remove pending requests from one address for all lists

remove all pending requests to one specific list. Is there a command line utility or script that can do this ? Many thanks. -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailma

Re: [Mailman-Users] subscribers being unsubscribed at wrong time based on bounce settings.

Sorry if my reply doesn't follow the standards for reply, but gmail is not quoting messages as it usually does. --- I tracked one of the disabled addresses that was unsubscribed. It is the same for all that were unsubscribed. bounce.log-20161101:Oct 31 16:16:36 2016 (32252) oe

[Mailman-Users] subscribers being unsubscribed at wrong time based on bounce settings.

hat I have not been able to explain. Many thanks, Christopher Adams -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy:

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

/Mailman/admin.py.old -rw-r--r--. 1 mailman mailman 71971 Sep 28 16:18 /usr/local/mailman/Mailman/admin.py.orig On Thu, Sep 29, 2016 at 8:35 AM, Mark Sapiro wrote: > On 09/29/2016 08:04 AM, Christopher Adams wrote: > > I cleared browser cache and reloaded. Same problem. Here are answers to

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

-rw-r--r--. 1 mailman mailman 71971 Sep 28 16:18 /usr/local/mailman/Mailadmin.py.orig I will send a copy of admin.py off list. Thanks. On Thu, Sep 29, 2016 at 8:35 AM, Mark Sapiro wrote: > On 09/29/2016 08:04 AM, Christopher Adams wrote: > > I cleared browser cache and reloaded. Sam

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

016 at 9:57 PM, Mark Sapiro wrote: > On 09/28/2016 09:34 PM, Christopher Adams wrote: > > I did patch the installed instance of Mailman > > (/usr/local/mailman/Mailman/Cgi/admin.py). I can see the changes that > > it made, but the result is the same when looking at the su

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

I did patch the installed instance of Mailman (/usr/local/mailman/Mailman/Cgi/admin.py). I can see the changes that it made, but the result is the same when looking at the subscriber list. On Sep 28, 2016 4:37 PM, "Mark Sapiro" wrote: > On 09/28/2016 04:28 PM, Christophe

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

at this was supposed to remedy. I then restarted Mailman, but that made no difference. On Wed, Sep 28, 2016 at 4:12 PM, Mark Sapiro wrote: > On 09/28/2016 11:04 AM, Christopher Adams wrote: > > > > Do I need to patch Mailman and then follow the process as I would for > > installi

Re: [Mailman-Users] problems linking to successive chunks of addresses in admin user search

ch' work ? Many thanks. On Tue, Sep 27, 2016 at 5:31 PM, Mark Sapiro wrote: > On 09/27/2016 04:31 PM, Christopher Adams wrote: > > > > So, the first chunk is '0' and then the link goes to chunk '1', but it > > links back to the top-level admin page. >

[Mailman-Users] problems linking to successive chunks of addresses in admin user search

you click the chunks of addresses by the alphabetical letters, it will successfully take you to each section. Is this a Feature or a Bug ? -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.

Re: [Mailman-Users] NotAMemberError on Subscribe

Please disregard, this looks to have been an error on some customization we did not related to source files. Sorry. Christopher Puchalski From: Christopher A Puchalski To: mailman-users@python.org Date: 06/23/2016 11:44 AM Subject:[Mailman-Users] NotAMemberError on Subscribe

[Mailman-Users] NotAMemberError on Subscribe

nd another slight misspelling. Thanks for any help that I can get in advance. Christopher Puchalski -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.

Re: [Mailman-Users] moderator page behind nginx with SSL

hange. After that fix the moderation page just worked. Good luck. Christopher Puchalski From: John Griessen To: mailman-users@python.org Date: 06/17/2016 08:04 AM Subject:[Mailman-Users] moderator page behind nginx with SSL Sent by:"Mailman-Users" Th

Re: [Mailman-Users] Problems using Postfix with Mailman

to a change in the version of Postfix. Many thanks, Mark. On May 3, 2016 5:56 PM, "Mark Sapiro" wrote: > On 05/03/2016 04:50 PM, Christopher Adams wrote: > > > In the maillog file, I get NOQUEUE: reject RCPT from localhost [::1] 454 > > 4.71 : Relay acce

[Mailman-Users] Problems using Postfix with Mailman

access denied" >From all that I have read, it must be a Postfix configuration problem, but since I just moved the old main.cf to the new server, I am perplexed. Posts to the Postfix-Users list has not been productive. If anyone uses Mailman and Postfix, maybe you can share your experienc

Re: [Mailman-Users] Problems with getting httpd to play well with new Mailman install

Mark Sapiro wrote: > On 05/02/2016 02:51 PM, Christopher Adams wrote: > > > > Looking in the httpd error log, I find this: "client denied by server > > configuration: /usr/local/mailman/cgi-bin/listinfo". > > > > I added a block in the httpd.conf file

[Mailman-Users] Problems with getting httpd to play well with new Mailman install

en commented out the directory block that limited access to the entire file system. I restarted httpd. Now, I get this : Bug in Mailman version 2.1.22 We're sorry, we hit a bug! -- Christopher Adams adam...@gmail.com -- Mailman-Users m

Re: [Mailman-Users] List Owner Password Reminder

Similar to self service joining of a list to prevent abuse. Chris P From: Mark Sapiro To: mailman-users@python.org Date: 11/05/2015 10:30 AM Subject:Re: [Mailman-Users] List Owner Password Reminder Sent by:"Mailman-Users" On 11/04/2015 02:05 PM, Christoph

[Mailman-Users] List Owner Password Reminder

Is there a "self service" password reminder for list owners? I am in the process of trying to deploy mailman within my company to replace a old majordomo instance. Majordomo access/authentication was managed by local LDAP credentials so users had no real excuse not to know their passwords. This

Re: [Mailman-Users] config.pck files

ng it all to me. On Oct 30, 2014 12:53 PM, "Mark Sapiro" wrote: > On 10/30/2014 09:03 AM, Christopher Adams wrote: > > Hello all, > > > > A list that is hosted here reported that the membership list and other > > settings had reverted to previous content.

[Mailman-Users] config.pck files

config.pck.safety to config.pck ? Many thanks -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http

Re: [Mailman-Users] Making a Mailman legacy archive searchable?

On Fri, 23 May 2014, Peter Weyland wrote: > Anyone recommend a searchable archive for MM? We are up to date with version > 2.1.18 I like swish-e http://swish-e.org/ == Chris Candreva -- ch...@westnet.com -- (914) 948-3162 WestNet Intern

Re: [Mailman-Users] subscribed address that forwards to secondary address can't be identified

Ok, I think I have what I need. I checked the mail logs and see that the header is showing the list name and the subscriber address. Now, I need to see what happens when I set a forward and send a message. On Mon, Apr 7, 2014 at 12:24 PM, Christopher Adams wrote: > Thank you all for y

Re: [Mailman-Users] subscribed address that forwards to secondary address can't be identified

/www.mail-archive.com/mailman-users%40python.org/ > Unsubscribe: > https://mail.python.org/mailman/options/mailman-users/adamsca%40gmail.com > -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.pyth

[Mailman-Users] subscribed address that forwards to secondary address can't be identified

y which address is the culprit. Does anyone have an idea how to get to the bottom of this? -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Ma

Re: [Mailman-Users] smtp-failure.log / diagnosing delivery to only some subscribers

? On Thu, Dec 12, 2013 at 11:16 PM, Mark Sapiro wrote: > On 12/12/2013 06:41 PM, Stephen J. Turnbull wrote: > > Christopher Adams writes: > > > > > So, I assumed that smtp-failure.log would show which addresses were > not > > > sent to. I don't thi

[Mailman-Users] smtp-failure.log / diagnosing delivery to only some subscribers

.log would show which addresses were not sent to. I don't think that is what it is for. Any suggestions on how to troubleshoot why the message seems to be only sent to a portion of the subscribers, though Mailman tells me it was sent to all the subscribers? -- Christopher Ada

Re: [Mailman-Users] problems with bounce processing

03:35 PM, Christopher Adams wrote: > > There is no bounce score entry in the bounce log. As it turns out, there > > has not been a bounce log generated since 11/13. > > > > Would BounceRunner show in a list of processes. If so, I don't see it. > > ps -fwC python > &g

Re: [Mailman-Users] problems with bounce processing

aster qrunner detected subprocess exit (pid: 27168, sig: None, sts: 2, class: BounceRunner, slice: 1/1) [restarting] /Bounce 1973,40 4 On Tue, Nov 19, 2013 at 1:25 PM, Mark Sapiro wrote: > On 11/19/2013 12:59 PM, Christopher Ada

Re: [Mailman-Users] problems with bounce processing

: 27168, sig: None, sts: 2, class: BounceRunner, slice: 1/1) [restarting] On Tue, Nov 19, 2013 at 1:25 PM, Mark Sapiro wrote: > On 11/19/2013 12:59 PM, Christopher Adams wrote: > > > > Looking at some older bounce logs, it appears that a few entries for > > bounce score appea

Re: [Mailman-Users] problems with bounce processing

37: to=< test7-boun...@mydomain.com>, relay=local, delay=0.2, delays=0.02/0/0/0.18, dsn=2.0.0, status=sent (delivered to command: /usr/local/mailman/mail/mailman bounces test7) On Tue, Nov 19, 2013 at 12:20 PM, Mark Sapiro wrote: > On 11/19/2013 11:26 AM, Christopher Adams wrote: >

[Mailman-Users] problems with bounce processing

are not getting unsubscribed. -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org https://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Security Policy: http://wik

Re: [Mailman-Users] Clearing Mailman's Queue...

Found it. Thank you. This was a big help. Regards, Christopher Kurtis Koeber -Original Message- From: Mailman-Users [mailto:mailman-users-bounces+ckoeber=gmail@python.org] On Behalf Of Mark Sapiro Sent: Monday, October 7, 2013 9:15 PM To: mailman-users@python.org Subject: Re

[Mailman-Users] Clearing Mailman's Queue...

ifications from flowing by simply stopping the mailman service but how do I clear the queue so that the notifications do not go out? Thank you for your time. Regards, Christopher Kurtis Koeber -- Mailman-Users mailing list Mai

Re: [Mailman-Users] (no subject)

) On Tue, May 14, 2013 at 9:43 AM, Mark Sapiro wrote: > On 05/14/2013 09:28 AM, Christopher Adams wrote: > > > > Then, this morning, I read another post about dns lookups in Postfix > main.cf. > > A poster said that he modifed his smtpd_recipient_restrictions and put > &

Re: [Mailman-Users] (no subject)

On Tue, May 14, 2013 at 8:26 AM, Christopher Adams wrote: > Thank you for your reply. > > QRUNNER_SLEEP_TIME = seconds(1) in Defaults.py > > Mesages are being archived almost immediately. There is nothing in the in/ > queue. > > There currently are about 954 files in the ou

Re: [Mailman-Users] (no subject)

, Mark Sapiro wrote: > On 05/13/2013 08:39 PM, Christopher Adams wrote: > > Postfix sends the list message it to the remote server, which shows that > > it was accepted by the Mailman server. > > > We are not communicating here. The above makes no sense to me. I think >

Re: [Mailman-Users] (no subject)

saw some reference to some work that had already been done with this, but it appears to be from 2008. Thank for any suggestions that you might have. On Mon, May 13, 2013 at 3:57 PM, Mark Sapiro wrote: > On 05/13/2013 09:32 AM, Christopher Adams wrote: > > Below is a log of a message sent

Re: [Mailman-Users] (no subject)

test7) May 13 08:02:09 swiki postfix/qmgr[17481]: 692E8199849A: removed On Thu, May 9, 2013 at 3:23 PM, Mark Sapiro wrote: > On 05/09/2013 01:30 PM, Christopher Adams wrote: > > > > At 12 noon, messages that had been sent but not delivered earlier today, > > suddenly were

[Mailman-Users] (no subject)

E774019985DC: to=< test7-ow...@mydomain.com>, relay=local, delay=0.9, delays=0.74/0/0/0.16, dsn=2.0.0, status=sent (delivered to command: /usr/local/mailman/mail/mailman owner test7) May 9 12:57:50 swiki postfix/qmgr[23217]: E774019985DC: removed -- Christopher A

Re: [Mailman-Users] Withlist with python module to change all lists to non-advertised

Geez, that is even documented. http://wiki.list.org/pages/viewpage.action?pageId=4030597 Thanks, Mark for getting me on the right track. On Wed, May 8, 2013 at 12:57 PM, Mark Sapiro wrote: > On 5/8/2013 12:41 PM, Christopher Adams wrote: > > I have been tasked to look into modi

[Mailman-Users] Withlist with python module to change all lists to non-advertised

I have been tasked to look into modifying all existing lists to be non-advertised. I have some knowledge of how withlist works with python. Has anyone created a module for use with python taht will accomplish this. I may have to get in and learn python again. Many thanks -- Christopher

Re: [Mailman-Users] Admin approval messages not being sent

Mailman at the volume we are using it. Maybe this is a question for the Postfix list. I have already implemented many of the configuration ideas to cut down on spam, though have not implemented an actual spam application like SpamAssassin. Many thanks, On Wed, Apr 24, 2013 at 3:42 PM, Christop

Re: [Mailman-Users] Admin approval messages not being sent

: > Christopher Adams wrote: > > >I can send mail outside of Mailman to the listname-owner address and it > >delivers correcty regardless of whether the list owners are inside the > >local subnet. The problem only seems to occur when sending through the > >Mailman server an

Re: [Mailman-Users] Admin approval messages not being sent

. On Mon, Apr 1, 2013 at 9:58 AM, Mark Sapiro wrote: > On 4/1/2013 8:22 AM, Christopher Adams wrote: > > I see the message in the Mailman smtp log going to the list and the two > > list owners. I also see the message directed to the list owner address > > in the MTA logs.

Re: [Mailman-Users] Admin approval messages not being sent

outside of our subnet work for getting confirmation approvals. However, they don't for addresses inside our subnet. That is strange because the owner addresses are deliverable and receive mail through list traffic via Mailman. On Thu, Mar 28, 2013 at 5:25 PM, Mark Sapiro wrote: > Christoph

Re: [Mailman-Users] Admin approval messages not being sent

On Thu, Mar 28, 2013 at 1:10 PM, Mark Sapiro wrote: > Christopher Adams wrote: > > > >Confirmation messages sent to users are being sent successfully. Messages > >intended as approval for subscriptions and sent to the list administrators > >are not being sent. They a

[Mailman-Users] Admin approval messages not being sent

x27;. The cron /cron/checkdbs runs every morning at 8 am. I have read of possible Handler exceptions in Mailman, but the error logs don't show anything. What else could I look for to diagnose this problem? Thank you. -- Christophe

Re: [Mailman-Users] Fw: Delivery Status Notification (Failure)

On 20/01/2013 05:27, Mark Sapiro wrote: Amit Bhatt wrote: I don't think there is any issue persisting because of Gmail, but just like to tell that he is sending the messages from his mobile phone. What happens if he sends from something other than his phone? My thoughts also. If he's using

[Mailman-Users] upgrade path from 2.1.13 to 2.1.15

, using all parameters that were previously used. Am I correct in my assumptions and is there anything else that I should know. based on what others experiences when upgrading. Many thanks, -- Christopher Adams adam...@gmail.com -- Mailman-Users

[Mailman-Users] non-digest member received message in digest format

logs and his status hasn't changed in the last 30 days. Others on the list received it yesterday. What might be going on here? -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.pytho

[Mailman-Users] Setting hard limit on message size for mailman

Is there a setting I could use to limit the size of a message mailman will process, that even a list owner can't approve to get around ? == Chris Candreva -- ch...@westnet.com -- (914) 948-3162 WestNet Internet Services of Westchester ht

Re: [Mailman-Users] Rather perplexing set of problems with a new 2.1.14vhost install on a DirectAdmin box -- and I'm new to Mailman

> If you really need the vhosts branch, I'll work with you on > the problems, but if you can live with globally unique list > names, I suggest you update your Python to 2.6.x and install > either the > 2.1.14-1 tarball from > or the head of the > branc

[Mailman-Users] Rather perplexing set of problems with a new 2.1.14 vhost install on a DirectAdmin box -- and I'm new to Mailman

Hi all, After becoming frustrated with Majordomo I decided to install Mailman on a DirectAdmin box I fell into managing. After some research I found Mark Sapiro's 2.1.14 vhost port (https://code.launchpad.net/~msapiro/mailman/vhost) which includes some fixes and merges of virtual hosting patches t

[Mailman-Users] question about harvesting of non-archived lists by archiveorange.com

utside. Is there something else that is going on here? Thanks for any information that anyone has to offer. -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mai

[Mailman-Users] Outlook and priority messages to Mailman

that I can control this behavior at the list or system level, but just looking for verification of this behavior. Thanks. -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailma

Re: [Mailman-Users] Stripping sig files

On Fri, 17 Dec 2010, Paul Tomblin wrote: > On Thu, Dec 16, 2010 at 9:24 AM, bruce clark wrote: > > My problem: the users on my lists are waging a low-level war with their sig > > files. I do not allow commercial posting so they have started creating sig > > files with their commercial messages in

Re: [Mailman-Users] Search tool for Mailman Archives

On Thu, 9 Dec 2010, Liste Yoneticisi wrote: > Hello; > > I am trying to implement a search tool for Mailman Archives. I've always liked swish for indexing web sites and mailing list archives http://www.swish-e.org/ == Chris Candreva -- c

[Mailman-Users] question about logging subscription changes

I think that the answer is 'no', but I thought I would check. Do any of the mailman log files show when a subscription is changed from a regular subscription to digest? I have parsed the logs and can't find evidence of this. -- Christopher Adams ad

Re: [Mailman-Users] An Anonymous, No-reply List

bject: [Mailman-Users] An Anonymous, No-reply List > >I have a customer who wants a announce-only list. She does not want >any replies to the list or to the poster. [Christopher Kurtis Koeber] I did this before. What I did was set both "member_moderation_action" a

Re: [Mailman-Users] Postfix and Mailman ...

On Wed, Oct 6, 2010 at 2:45 PM, Geoff Shang wrote: > On Mon, 4 Oct 2010, Mark Sapiro wrote: > > I think the problem is students.wesleyseminary.edu is a >> virtual_mailbox_domain whereas it needs to be a virtual_alias_domain. >> > > Maybe I'm missing something, but I've never had trouble using vir

Re: [Mailman-Users] Postfix and Mailman ...

On Tue, Oct 5, 2010 at 10:38 AM, Mark Sapiro wrote: > Christopher Kurtis Koeber wrote: > > > >Is there a way to > >conditionally use transports? Say, if one email address is found via a > rule > >to use a local transport versus the virtual one? > > > >

Re: [Mailman-Users] Postfix and Mailman ...

Also, in additional to my question on whether the transport can be rules based I am wondering if it is possible to switch everything to the local transport but still support virtual domains. This is necessary for my setup. Thank you for your time. Regards, Christopher Koeber On Oct 5, 2010 1

Re: [Mailman-Users] Postfix and Mailman ...

See below. >-Original Message- >From: Mark Sapiro [mailto:m...@msapiro.net] >Sent: Monday, October 04, 2010 11:08 PM >To: Christopher Koeber; mailman-users@python.org >Subject: Re: [Mailman-Users] Postfix and Mailman ... > >Chr

Re: [Mailman-Users] Postfix and Mailman ...

rvice I get this "unable to create lockfile" problem. Shouldn't postfix actually pipe to the program mailman? Anyone seen that before? Thanks. Regards, Christopher Koeber On Wed, Sep 29, 2010 at 9:36 PM, Mark Sapiro wrote: [...] > -- > Mark Sapiro The highway is f

[Mailman-Users] Postfix and Mailman ...

site-specific settings below this line. DEFAULT_EMAIL_HOST = 'students.wesleyseminary.edu' DEFAULT_URL_HOST = 'students.wesleyseminary.edu' MTA = "Postfix" POSTFIX_STYLE_VIRTUAL_DOMAINS = ['wesleyministrynetwork.com', ' students.wesleyseminary.edu'] ad

[Mailman-Users] 'ack' doesn't work when sending as list rather than sender?

I just figured out that a sender can only get an acknowledgment with 'ack' checked if the list is sending as the sender as opposed to list name. Is there anyway that a sender can get an acknowledgment even if the list is set up this way? -- Christopher Adams adam...

Re: [Mailman-Users] BATV and Mailman

d this. I based my findings from my search for "prvs=" in Google. On Wed, Sep 22, 2010 at 8:47 PM, Brad Knowles wrote: > On Sep 22, 2010, at 12:02 PM, Christopher Adams wrote: > >> I have had a couple of list subscribers fail to post message to their >> lists. I tracked

Re: [Mailman-Users] Preventing from getting on spam list

On Tue, 28 Sep 2010, Hung Phan wrote: > We are a school district which sends out legitimate messages about school > information to parents but last week, we were tagged by spamrats as > spammer. An important message did not reach all the subscribers because > the local ISP which hosts many of o

[Mailman-Users] BATV and Mailman

rejected: undeliverable address: host senders.mailserver.com[xxx.xx.xxx.xx] said: 550 5.1.1 -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman

[Mailman-Users] bounce message w/no discernable addresses

Can someone help me interpret exactly what this means? Aug 27 09:31:08 2010 (14241) libs-or: bounce message w/no discernable addresses: <4b77cbb77f52bf41bee2c397760565bd08853...@xxx.xxx.xxx.xx.local> Aug 27 09:31:08 2010 (14241) libs-or: forwarding unrecognized, message-id: <4b77cbb77f52bf41bee2c3

[Mailman-Users] question about log entry of posting to list from list owner

...@mydomain.com size=3047, message-id=< mailman.245.1282239915.26781.listn...@mydomain.com>, 1 failures -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users M

[Mailman-Users] question about rotating logs from FAQ

Hello all, I recently upgraded to the latest version of Mailman. I had been using a change in /Mailman/Logging/Logger.py to rename logfiles with the *.log extension. This was as suggested from the Mailman FAQ: http://wiki.list.org/pages/viewpage.action?pageId=4030580 So, I modified the file as s

Re: [Mailman-Users] unsubscribing addresses from domain in one fell swoop?

easily be reinstated. On Mon, Jan 4, 2010 at 4:34 PM, Christopher Adams wrote: > A spammer has subscribed completely unique addresses from the same domain > to many of the mailing lists that we host. Is there a way to unsubscribe > everything from this domain without writing a script tha

Re: [Mailman-Users] unsubscribing addresses from domain in one fellswoop?

Thanks, Mark. I was just starting to construct a script, but yours is much more streamlined and works just fine. Thanks. Anyone else dealing with zeusmail.org ? On Mon, Jan 4, 2010 at 5:25 PM, Mark Sapiro wrote: > Christopher Adams wrote: > > >A spammer has subscribed compl

[Mailman-Users] unsubscribing addresses from domain in one fell swoop?

A spammer has subscribed completely unique addresses from the same domain to many of the mailing lists that we host. Is there a way to unsubscribe everything from this domain without writing a script that will do it? -- Christopher Adams adam...@gmail.com

[Mailman-Users] Mailman current version?

Gnu has 2.1.12. I am pretty sure that the latter is the most current stable version and I have not seen any posts about a new version, so? I just want to verify this before moving forward with the migration. -- Christopher Adams adam...@gmail.com

Re: [Mailman-Users] Microsoft Outlook and footer/signature"attachments"

he office has had such a reaction with messages sent through Mailman). I may just have to write a pre- or post-process filter that adds the footer into the message manually. Thanks for the help. -- Christopher -- Mailman-Users mailing list Mail

Re: [Mailman-Users] Microsoft Outlook and footer/signature "attachments"

ns discussed in the FAQ, but which you > may find useful. > Thanks for the suggestion, Mark. Unfortunately the powers that be have ordained that we must keep both HTML/MIME messages intact as well as include the header/footer. I'll see what opti

[Mailman-Users] Microsoft Outlook and footer/signature "attachments"

of whatever message comes through, before tacking on attachments. Thank you for your time -- Christopher -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x

Re: [Mailman-Users] bug error when subscribing through webafterMailman 2.1.12 upgrade

t? On Thu, Jul 23, 2009 at 7:39 AM, Mark Sapiro wrote: > Christopher Adams wrote: >> >>The modification to MailList.py is something that you suggested awhile >>back and I had carried it through as Mailman was upgraded. Here is the >>thread from 2005. >> >>http:

Re: [Mailman-Users] bug error when subscribing through web afterMailman 2.1.12 upgrade

thing that would be assumed to exist in an out of the box installation. Thanks again for your help. I have removed the modifications and it is working correctly again. Christopher Adams On Wed, Jul 22, 2009 at 5:50 PM, Mark Sapiro wrote: > Christopher Adams wrote: > >>Since upgrading to

[Mailman-Users] bug error when subscribing through web after Mailman 2.1.12 upgrade

n/xml;q=0.9,*/*;q=0.8 admin(9559):GATEWAY_INTERFACE: CGI/1.1 admin(9559):REMOTE_PORT: 1638 admin(9559):HTTP_ACCEPT_LANGUAGE: en-us,en;q=0.5 admin(9559):CONTENT_TYPE: application/x-www-form-urlencoded admin(9559):HTTP_ACCEPT_ENCODING: gzip,deflate a

Re: [Mailman-Users] digests/Python/2.1.12 upgrade

. Thanks again, Christopher Adams On Mon, Jul 20, 2009 at 6:08 PM, Mark Sapiro wrote: > Christopher Adams wrote: >> >>>From crontab.in : > > > What about from > > crontab -u mailman -l > > although it's popbably the same. > > >># >># Noon,

[Mailman-Users] mailman-loop question

alias and restarted mailman, yet the message continue to be delivered. -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http

Re: [Mailman-Users] digests/Python/2.1.12 upgrade

r /usr/local/mailman/pythonlib/lib/python2.5, that does seem to be irrelevant to this. It points to some Japanese site-packages or something. I thought is was something else. On Sat, Jul 18, 2009 at 10:05 PM, Mark Sapiro wrote: > Christopher Adams wrote: >> >>It says __version__ = &#

Re: [Mailman-Users] digests/Python/2.1.12 upgrade

Mark, It says __version__ = '4.0.1' I guess my only alernative is to upgrade to 2.5.2, though I am not sure if the OS will support it. On Sat, Jul 18, 2009 at 2:05 PM, Mark Sapiro wrote: > Christopher Adams wrote: >> >>If I issue the python command, I get this: >&g

Re: [Mailman-Users] digests/Python/2.1.12 upgrade

tion/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 admin(29902): GATEWAY_INTERFACE: CGI/1.1 admin(29902): REMOTE_PORT: 1809 admin(29902): HTTP_ACCEPT_LANGUAGE: en-us,en;q=0.5 admin(29902): CONTENT_TYPE: application/x-www-form-urlencoded admin(29902): HTTP_ACCEPT_ENCODING: gzip,deflate admin(29

[Mailman-Users] digests/Python/2.1.12 upgrade

w, we recommend using Python 2.5.2. Can someone verify whether this is a Python issue and will an upgrade to 2.5.2 make a difference. Of course, I'm not sure Python 2.5 is really designed to run on RH ES 3, but it has been doing fine up til now. Thanks, Chriistopher Adams -- Ch

[Mailman-Users] digest question

generating digests each night? -- Christopher Adams adam...@gmail.com -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/mailman/listinfo/mailman-users Mailman FAQ: http://wiki.list.org/x/AgA3 Searchable Archives: http

Re: [Mailman-Users] Soft bounces....

On Thu, 2 Apr 2009, Charles Gregory wrote: > Yahoo expects me to respond promptly to 5xx bounces, disabling any > subscriptions, otherwise it starts generating 'greylist' 4xx bounces for my > mail. Unfortunately, if I try to lower the bounce threshold, the now-daily > occurence of 4xx bounces guar

Re: [Mailman-Users] Detailed list of features for version 2.1.11 ?

Thanks, Mark. Yes, that was the page I was accessing it from. On Thu, Dec 4, 2008 at 2:00 PM, Mark Sapiro <[EMAIL PROTECTED]> wrote: > Christopher Adams wrote: > >>This link leads to an error. Is there another source for this information? >> >>http://cvs.sourceforge.

[Mailman-Users] Detailed list of features for version 2.1.11 ?

This link leads to an error. Is there another source for this information? http://cvs.sourceforge.net/viewcvs.py/mailman/mailman/NEWS?only_with_tag=Release_2_1-maint -- Christopher Adams [EMAIL PROTECTED] -- Mailman-Users mailing list Mailman

Re: [Mailman-Users] Any way to prevent un-subscribing?

On Wed, 1 Oct 2008, Elizabeth Schwartz wrote: > I've been asked to prevent the students from un-subscribing. Is there > a way to do that in any version of mailman? And/or any other > convenient mechanism? The list is a bit unwieldy for plain email Under "Privacy options" you can enable the opti

[Mailman-Users] "Messages Awaiting Approval" email wildly inaccurate

aining constant. I think this is the result of someone manually deleting messages from mailman/data. Is there any way to fix the problem? Thanks Christopher -- Mailman-Users mailing list Mailman-Users@python.org http://mail.python.org/m

  1   2   3   4   5   >