.
Bitte informieren Sie sich über die weiteren Details einmal unverbindlich auf
unseren Webseiten:
http://www.dbconnectmarketing.net/?p=1
Mit freundlichen Grüßen
Martin Winkler
.
Bitte informieren Sie sich über die weiteren Details einmal unverbindlich auf
unseren Webseiten:
http://www.acdbmarketing.net/?p=1
Mit freundlichen Grüßen
Martin Winkler
.
Bitte informieren Sie sich über die weiteren Details einmal unverbindlich auf
unseren Webseiten:
http://www.topdialog.net/?p=1
Mit freundlichen Grüßen
Martin Winkler
Здравейте,
Ваучерите за храна се нареждат сред любимите социални придобивки на работещите
хора и сред най-предпочитаните начини за стимулиране от работодателите. Те
подобряват ефективността и производителността на Вашите служители.
Благодарение на ваучерите за храна реализирате спестявания –
Здравейте,
Ваучерите за храна се нареждат сред любимите социални придобивки на работещите
хора и сред най-предпочитаните начини за стимулиране от работодателите. Те
подобряват ефективността и производителността на Вашите служители.
Благодарение на ваучерите за храна реализирате спестявания –
Здравейте,
Ваучерите за храна се нареждат сред любимите социални придобивки на работещите
хора и сред най-предпочитаните начини за стимулиране от работодателите. Те
подобряват ефективността и производителността на Вашите служители.
Благодарение на ваучерите за храна реализирате спестявания –
Drahý přítel
Jak se máš? Poslal jsem vám e-mail, ale nemám od vás žádnou odpověď.
Je spojena s důležitými informacemi o vašem pozdějším příbuzném, tady
je moje e-mailová adresa (martin_larc...@outlook.com)
pozdravy
Martin Larcher
is is probably why it works.
My question is should the ov5640 driver be modified to include a
format where FMT_FLAG_RAW_FROM_SENSOR is set, or should the Atmel ISC
driver be modified to handle drivers where there is no match for a Raw
Format?
Many Thanks in Advance,
Martin.
er", "dmc";
> +
> + interrupts = + GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
AFAIK the "correct" format is (just like you've done for the clocks below):
interrupts = ,
;
> + interrupt-names = "vdec", "esparser";
> +
> + amlogic,ao-sysctrl = <&sysctrl_AO>;
this is not documented above - is it needed?
Regards
Martin
[0] http://lists.infradead.org/pipermail/linux-amlogic/2018-August/008034.html
Using my webcom on my Dell XPS 9370, running latest Debian buster/sid
produces a error in dmesg when running guvcview, though it seems the camera
works fine from a user perspective.
Full dmesg is:
[0.00] Linux version 4.16.0-1-amd64 (debian-ker...@lists.debian.org)
(gcc version 7.3.0 (De
I tried to compile media-build on Ubuntu 18.04. (gcc 7.3.0) with Kernel
4.15 and get this error:
/home/martin/media_build/v4l/video-i2c.c: In function 'video_i2c_probe':
/home/martin/media_build/v4l/video-i2c.c:456:16: error: implicit
declaration of function 'device_get_match
Sorry for resurrecting this thread but I'm still quite interested on
making this scenario work:
> OK, I've performed some tests with several resolutions and gop sizes,
here is the table with the results:
>
> Always playing 3 streams
>
> | Resolution | QP | GopSize | Kind of content |
On 03/28/2018 06:02 PM, Yong wrote:
AFAIK, there is no document about MIPI CSI-2. You can take a look at the
source code in BSP:
https://github.com/friendlyarm/h3_lichee/tree/master/linux-3.4/drivers/media/video/sunxi-vfe/mipi_csi
And try to port it to mainline.
Yep, I see there's lots of mag
On 03/05/2018 05:51 PM, Yong Deng wrote:
This patchset add initial support for Allwinner V3s CSI.
Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
interface and CSI1 is used for parallel interface. This is not
documented in datasheet but by test and guess.
This patchset im
Hi Neil,
On Sat, Mar 24, 2018 at 2:41 PM, Neil Armstrong wrote:
> Hi Martin,
>
>> Le 24 mars 2018 à 12:00, Martin Blumenstingl
>> a écrit :
>>
>> Hello Hans, Hi Neil,
>>
>> (apologies in advance if any of this is wrong, I don't have any CEC
>
in the cover-letter and patch description
Regards
Martin
Hello Philipp,
On 14/03/18 16:11, Philipp Zabel wrote:
Hi Javier,
On Wed, 2018-03-14 at 15:35 +0100, Javier Martin wrote:
[...]
The encoder is running on a different system with an older 4.1.0 kernel.
Altough the firmware version in the code is 3.1.1 as well.
Do you think I should try
Hello,
On 14/03/18 14:57, Philipp Zabel wrote:
On Wed, 2018-03-14 at 13:05 +0100, Javier Martin wrote:
Sorry everyone about my previous e-mail with all the HTML garbage. Here
is the plain text answer instead.
Hi Philipp,
thanks for your answer.
On 13/03/18 12:20, Philipp Zabel wrote
Sorry everyone about my previous e-mail with all the HTML garbage. Here
is the plain text answer instead.
Hi Philipp,
thanks for your answer.
On 13/03/18 12:20, Philipp Zabel wrote:
> Hi Javier,
>
> On Mon, 2018-03-12 at 17:54 +0100, Javier Martin wrote:
>> Hi,
>> we hav
Hi,
we have an i.MX6 Solo based board running the latest mainline kernel
(4.15.3).
As part of our development we were measuring the decoding performance of
the i.MX6 coda chip.
For that purpose we are feeding the decoder with 640x368 @ 30fps H.264
streams that have been generated by another
Kredit? so schnell wie möglich? unkompliziert und seriös ? Bei uns genau
richtig. Wir arbeiten europaweit. Wir vermitteln Kredite und Darlehen zu fairen
Konditionen. Durch unsere seriöse, kompetente und ehrliche Kreditberatung haben
wir über Jahre eine starke Position auf dem Markt.
Joe,
> Some functions definitions have either the initial open brace and/or
> the closing brace outside of column 1.
>
> Move those braces to column 1.
SCSI bits look OK.
Acked-by: Martin K. Petersen
--
Martin K. Petersen Oracle Linux Engineering
7;, this
function's name, in a string
Signed-off-by: Martin Homuth
---
drivers/staging/media/cxd2099/cxd2099.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/cxd2099/cxd2099.c
b/drivers/staging/media/cxd2099/cxd2099.c
index 3e30f48..6641dd2
7;, this
function's name, in a string
Signed-off-by: Martin Homuth
---
drivers/staging/media/cxd2099/cxd2099.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/cxd2099/cxd2099.c
b/drivers/staging/media/cxd2099/cxd2099.c
index 3e30f48..6641dd2
s
function's name, in a string
Signed-off-by: Martin Homuth
---
drivers/staging/media/cxd2099/cxd2099.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/media/cxd2099/cxd2099.c
b/drivers/staging/media/cxd2099/cxd2099.c
index 3e30f48..6641dd2 100644
--- a/dr
s
function's name, in a string
Signed-off-by: Martin Homuth
---
drivers/staging/media/lirc/lirc_zilog.c | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/media/lirc/lirc_zilog.c
b/drivers/staging/media/lirc/lirc_zilog.c
index 6bd0717bf76e..be68ee652071
This patch fixes the remaining coding style warnings in the lirc module.
It fixes the following checkpatch.pl warning:
WARNING: Prefer using '"%s...", __func__' to using 'read', this
function's name, in a string
>From f11f24667ba6696cb71ac33a67fc0c7d3b4cd542
Am 22.11.2017 14:43 schrieb Philipp Zabel:
Hi Martin,
On Fri, 2017-11-17 at 15:30 +0100, Martin Kepplinger wrote:
At this point the driver looks the currently decoded frame's index
and compares is to VPU-specific state values. Directly before this
if and else statements the indexes are
Am 22.11.2017 11:40 schrieb Philipp Zabel:
Hi Martin,
On Thu, 2017-11-09 at 23:14 +0100, Martin Kepplinger wrote:
Hi Philipp,
As I'm reading up on the coda driver a little, I can't seem to find
the
vendor's sources for the coda_regs.h definitions. Could you point me
to
them?
is point!
During these index checks, the current values apply, so fix this by
taking display_idx instead of ctx->display_idx.
ctx->display_idx is updated later in the same function.
Signed-off-by: Martin Kepplinger
---
Please review this thoroughly, but in case I am wrong here, this is
at leas
a comment about the source
in the header file.
and thanks for this driver. It seems to make the best possible use of
this remaining firmware binary, really :)
martin
;t be needed
for i.MX6.
So avoid confusion and remove this definition.
Signed-off-by: Martin Kepplinger
---
drivers/media/platform/coda/coda_regs.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/media/platform/coda/coda_regs.h
b/drivers/media/platform/coda/coda_regs.h
index 38df5fd
ble in the future.
Signed-off-by: Martin Kepplinger
---
drivers/media/platform/coda/coda_regs.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/platform/coda/coda_regs.h
b/drivers/media/platform/coda/coda_regs.h
index 38df5fd9a2fa..8d726faaf86e 100644
--- a/dri
Sehr geehrte Damen und Herren,
Sie brauchen Geld? Sie sind auf der suche nach einem Darlehnen? Seriös und
unkompliziert?
Dann sind Sie hier bei uns genau richtig.
Durch unsere jahrelange Erfahrung und kompetente Beratung sind wir Europaweit
tätig.
Wir bieten jedem ein GÜNSTIGES Darlehnen zu TOP
On 2017-10-05 17:45, Philipp Zabel wrote:
> On Wed, 2017-10-04 at 10:44 +0200, Martin Kepplinger wrote:
>> Hi,
>>
>> Commit
>>
>> be7f1ab26f42 media: coda: mark CODA960 firmware versions 2.3.10
>> and
>> 3.1.1 as supported
>>
>> s
Am 05.10.2017 16:10 schrieb Nicolas Dufresne:
Le jeudi 05 octobre 2017 à 13:54 +0200, Martin Kepplinger a écrit :
> This message is most likely just a result of the VDOA not supporting
> the
> selected capture format. In vdoa_context_configure, you can see that
> the
> VDOA only
Am 05.10.2017 10:19 schrieb Philipp Zabel:
Hi Martin,
On Thu, 2017-10-05 at 09:43 +0200, Martin Kepplinger wrote:
I'm running a little off-topic here, but with the newest firmware
too,
my
coda driver says "Video Data Order Adapter: Disabled" when started
by video playback v
Am 04.10.2017 11:22 schrieb Philipp Zabel:
Hi Martin,
On Wed, 2017-10-04 at 10:44 +0200, Martin Kepplinger wrote:
Hi,
Commit
be7f1ab26f42 media: coda: mark CODA960 firmware versions 2.3.10
and 3.1.1 as supported
says firmware version 3.1.1 revision 46072 is contained in
"fir
ould
be a good place for documenting how to use these binaries too)
thanks
martin
Bhumika,
> Make these const as they are only stored in the type field of a device
> structure, which is const.
Applied to 4.14/scsi-queue. Thanks!
--
Martin K. Petersen Oracle Linux Engineering
Audio channel count should start from 2.
Reference: CEA-861-F Table 27.
Cc: Hans Verkuil
Reported-by: Ahung Cheng
Signed-off-by: Martin Bugge
---
drivers/video/hdmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/hdmi.c b/drivers/video/hdmi.c
index 1cf907e
DRX_S9TOS16 and DRX_S24TODRXFREQ are simply not used. Furthermore,
sign_extend32() should be used for sign extension. (Also, the comment
describing DRX_S24TODRXFREQ was wrong). So remove these macros.
Signed-off-by: Martin Kepplinger
---
drivers/media/dvb-frontends/drx39xyj/drx_driver.h | 13
unsubscribe linux-media
2017-02-19 14:27 GMT+01:00 Daniel Scheller :
>
> Hi Martin,
>
> For someone who has some knowledge on the stv0367 demods, it's probably
> not very hard.
>
> While I don't have that knowledge, I've started tackling
> the "in-kernel" stv0367 mod
90112 29
cxd209920480 1 ddbridge
dvb_core 102400 1 ddbridge
The ddbridge and cxd2099 are in the latest media_build, but the
stv0367dd and tda18212dd are missing (however, the stv0367 and
tda18212 are available). How hard is it to add these two?
Regards,
Martin
> Regards,
>
> Hans
>
can easily remove by commenting out the specific line as well.
Now my questions are:
- is this the correct way to fix these compile errors? (I'm definately
not a professional developer)
- what can I do to have this solved in the source?
Besides that, I'm also wondering if these drivers have any change of
getting into kernel mainline?
Regards,
Martin
On Wed, Feb 1, 2017 at 11:14 PM, Martin Blumenstingl
wrote:
> The driver already parses the "linux,rc-map-name" property. Add this
> information to the documentation so .dts maintainers don't have to look
> it up in the source-code.
>
> Signed-off-by: Martin Blumens
The driver already parses the "linux,rc-map-name" property. Add this
information to the documentation so .dts maintainers don't have to look
it up in the source-code.
Signed-off-by: Martin Blumenstingl
Acked-by: Rob Herring
---
Changes since v1:
- removed character which shows u
The driver already parses the "linux,rc-map-name" property. Add this
information to the documentation so .dts maintainers don't have to look
it up in the source-code.
Signed-off-by: Martin Blumenstingl
---
Documentation/devicetree/bindings/media/meson-ir.txt | 3 +++
1
Signed-off-by: Martin Blumenstingl
---
The geekbox keymap was added while the documentation patch was not
applied yet (and I wasn't aware of this pending patch). This ensures
that the documentation is in sync with the actual keymaps.
Documentation/devicetree/bindings/media/rc.txt | 1 +
1
The GeekBox ships with a 12 button remote control which seems to use the
NEC protocol. The button keycodes were captured with the "ir-keytable"
tool (ir-keytable -p $PROTOCOL -t; human_button_pusher).
Signed-off-by: Martin Blumenstingl
---
drivers/media/rc/keymaps/Makefile | 1
rt820t_config and mn88473_config (you can probably use the code of
another board and adapt it accordingly)
7. test + bugfix :)
Regards,
Martin
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo inf
ivers/media/usb/cx231xx/cx231xx-cards.c along with some code that
connects the tuner and demodulator in
drivers/media/usb/cx231xx/cx231xx-dvb.c (there may be more TODOs: for
example fiddling with GPIOs, but if you're lucky this is not required)
Regards,
Martin
--
To unsubscribe from this list: s
lows me to unload/reload the drivers,
bringing it back into a usable state.
Signed-off-by: Martin Wache
---
drivers/media/dvb-frontends/dib7000p.c | 15 ---
1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/media/dvb-frontends/dib7000p.c
b/drivers/media/dvb-frontends/
ns to keep it in line with
> dvb logarithm functions.
>
> Move all statistic logic to mn88473_read_status() function.
>
> Use regmap_bulk_read() for reading multiple registers as a one go.
>
> And many more and less minor changes.
>
> Cc: Martin Blumenstingl
> Signed-of
ph> Otherwise this cleans up a lot of cruft and allows to use a
Christoph> common request_irq loop for irq types, which happens to only
Christoph> iterate over a single line in the non MSI-X case.
Applied to 4.10/scsi-queue.
--
Martin K. Petersen Oracle Linux Engineering
--
T
ph> vectors.
Christoph> Otherwise this cleans up a lot of cruft and allows to use a
Christoph> common request_irq loop for irq types, which happens to only
Christoph> iterate over a single line in the non MSI-X case.
Applied to 4.10/scsi-queue.
--
Martin K. Petersen Oracle Linu
)
- signal strength seems to be too low (compared to my em28xx device)
- I am not sure whether my implementation for bit errors and block
errors is correct
[0] https://www.linuxtv.org/wiki/index.php/Panasonic_MN88472
Martin Blumenstingl (1):
media: mn88473: add DVBv5 statistics support
drivers
Implement DVBv5 statistics support for DVB-T, DVB-T2 and DVB-C. All
information was taken from the LinuxTV wiki, where Benjamin Larsson has
documented all registers:
https://www.linuxtv.org/wiki/index.php/Panasonic_MN88472
Signed-off-by: Martin Blumenstingl
---
drivers/media/dvb-frontends
ph> Otherwise this cleans up a lot of cruft and allows to use a
Christoph> common request_irq loop for irq types, which happens to only
Christoph> iterate over a single line in the non MSI-X case.
Brian, Gabriel: Please test and review. Thanks!
--
Martin K. Petersen Oracle Linux E
ph> vectors.
Christoph> Otherwise this cleans up a lot of cruft and allows to use a
Christoph> common request_irq loop for irq types, which happens to only
Christoph> iterate over a single line in the non MSI-X case.
Ching: Please test and review. Thanks!
--
Martin K. Petersen O
This adds the IR remote receiver to the AO domain devices.
Signed-off-by: Martin Blumenstingl
Reviewed-by: Kevin Hilman
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
b/drivers/pinctrl/meson
m/erdoukki/linux-amlogic-1/commit/969b2e2242fb14a13cb651f9a1cf771b599c958b
[1] http://forum.odroid.com/viewtopic.php?f=135&t=20504
Martin Blumenstingl (3):
pinctrl: amlogic: gxbb: add the IR remote input pin
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb:
m/erdoukki/linux-amlogic-1/commit/969b2e2242fb14a13cb651f9a1cf771b599c958b
[1] http://forum.odroid.com/viewtopic.php?f=135&t=20504
Martin Blumenstingl (3):
pinctrl: amlogic: gxbb: add the IR remote input pin
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb:
From: Neil Armstrong
New bindings are needed as the register layout on the newer platforms
is slightly different compared to Meson6b.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/media/meson-ir.txt | 5 -
1
From: Neil Armstrong
This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 4f42316..96f4574 100644
--- a/arch/arm64/boot/dts/amlogic
Enable the Infrared Remote Controller on boards which have an Infrared
receiver.
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 6 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-vega
From: Neil Armstrong
Newer SoCs (Meson 8b and GXBB) are using REG2 (offset 0x20) instead of
REG1 to configure the decoder mode. This makes it necessary to
introduce new bindings so the driver knows which register has to be
used.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
il):
Tested-by: Neil Armstrong
[0]
https://github.com/erdoukki/linux-amlogic-1/commit/969b2e2242fb14a13cb651f9a1cf771b599c958b
[1] http://forum.odroid.com/viewtopic.php?f=135&t=20504
Martin Blumenstingl (3):
pinctrl: amlogic: gxbb: add the IR remote pin
ARM64: dts: amlogic: add the pi
This adds the IR remote receiver to the AO domain devices.
Signed-off-by: Martin Blumenstingl
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 8
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index
From: Neil Armstrong
Newer SoCs (Meson 8b and GXBB) are using REG2 (offset 0x20) instead of
REG1 to configure the decoder mode. This makes it necessary to
introduce new bindings so the driver knows which register has to be
used.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
From: Neil Armstrong
This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a
From: Neil Armstrong
New bindings are needed as the register layout on the newer platforms
is slightly different compared to Meson6b.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
Acked-by: Rob Herring
---
Documentation/devicetree/bindings/media/meson-ir.txt | 5 -
1
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 4f42316..72df302 100644
--- a/arch/arm64/boot/dts/amlogic
Enable the Infrared Remote Controller on boards which have an Infrared
receiver.
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 6 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 6 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-vega
> Hi,
>
> I see that my card 292e has LNA support:
> https://patchwork.linuxtv.org/patch/23763/
>
> but searching I can't find how to enable this the force option
> force_lna_activation=1 that the t500 uses isn't recognised
>
> Please could someone tell me if this is configurable an if so how to
>
Hi,
I see that my card 292e has LNA support:
https://patchwork.linuxtv.org/patch/23763/
but searching I can't find how to enable this the force option
force_lna_activation=1 that the t500 uses isn't recognised
Please could someone tell me if this is configurable an if so how to
configure it?
Th
Enable the Infrared Remote Controller on boards which have an Infrared
receiver.
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 4
arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95
and enable it on the supported
boards
[0]
https://github.com/erdoukki/linux-amlogic-1/commit/969b2e2242fb14a13cb651f9a1cf771b599c958b
[1] http://forum.odroid.com/viewtopic.php?f=135&t=20504
Martin Blumenstingl (1):
ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
Neil A
From: Neil Armstrong
This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a
From: Neil Armstrong
New bindings are needed as the register layout on the newer platforms
is slightly different compared to Meson6b.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
---
Documentation/devicetree/bindings/media/meson-ir.txt | 5 -
1 file changed, 4
From: Neil Armstrong
Newer SoCs (Meson 8b and GXBB) are using REG2 (offset 0x20) instead of
REG1 to configure the decoder mode. This makes it necessary to
introduce new bindings so the driver knows which register has to be
used.
Signed-off-by: Neil Armstrong
Signed-off-by: Martin Blumenstingl
e
(either set by the bootloader or the chip's default, which uses NEC as
it's default) is used.
While here, I also added defines for the protocols which can be decoded
by the hardware (more work is needed to be actually able to use them
though).
Signed-off-by: Martin Blumenstingl
--
According to the reference driver (and the datasheet of the newer
Meson8b/S805 and GXBB/S905 SoCs) there are 14 registers, each 32 bit
wide.
Adjust the register size to reflect that, as register offset 0x20 is
now also needed by the meson-ir driver.
Signed-off-by: Martin Blumenstingl
---
changes
The meson-ir driver uses the wrong offset (at least according to
Amlogic's reference driver as well as the datasheets of the
Meson8b/S805 and GXBB/S905).
This means that we are getting incorrect durations (REG1_TIME_IV)
reported from the hardware.
This problem was also noticed by some people tryin
e
(either set by the bootloader or the chip's default, which uses NEC as
it's default) is used.
While here, I also added defines for the protocols which can be decoded
by the hardware (more work is needed to be actually able to use them
though).
Signed-off-by: Martin Blumenstingl
---
dr
The meson-ir driver uses the wrong offset (at least according to
Amlogic's reference driver as well as the datasheets of the
Meson8b/S805 and GXBB/S905).
This means that we are getting incorrect durations (REG1_TIME_IV)
reported from the hardware.
This problem was also noticed by some people tryin
The rtl2832 demod has 2 sets of PID filters. This patch enables
the filter support when using a slave demod.
Signed-off-by: Benjamin Larsson
Signed-off-by: Martin Blumenstingl
---
changes since v2:
- rebased to make the patch apply again
- removed explicit initialization of dev->slave_ts
T2266
- MEDIA_TUNER_MXL5007T
Signed-off-by: Martin Blumenstingl
---
drivers/media/usb/dvb-usb-v2/Kconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig
b/drivers/media/usb/dvb-usb-v2/Kconfig
index 3dc8ef0..fcecbf7 100644
--- a/drivers/media/usb/dvb-usb-v2/Kc
Signed-off-by: Martin Blumenstingl
---
drivers/media/usb/dvb-usb-v2/Kconfig | 8
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig
b/drivers/media/usb/dvb-usb-v2/Kconfig
index fcecbf7..524533d 100644
--- a/drivers/media/usb/dvb-usb-v2
Hello,
my "Astrometa AMDVB-T2 v2" is not working on Arch Linux because their
kernel config does not select CONFIG_DVB_MN88473. This is because the
maintainers simply rely on MEDIA_SUBDRV_AUTOSELECT to choose the
required drivers.
This patchset depends on Antti Palosaari's patch
"mn88472: move out
The rtl2832 demod has 2 sets of PID filters. This patch enables
the filter support when using a slave demod.
Signed-off-by: Benjamin Larsson
Signed-off-by: Martin Blumenstingl
---
This patch was originally written by Benjamin Larsson, all I did was
rebasing the patch and to extend the dev_dbg
My name is Barr. Martin William and i am writing to you about the death of
my late client whom I believe to be one of your relatives and some
fund($US9,500,000,00)he left behind before his death. And I want you to
stand as his next of kin since you have the same surname with him and claim
this
My name is Barr. Martin William and i am writing to you about the death of
my late client whom I believe to be one of your relatives and some
fund($US9,500,000,00)he left behind before his death. And I want you to
stand as his next of kin since you have the same surname with him and claim
this
Corrected sync polarities for CEA-861-F timings
3840x2160p24/25/30/50/60 and 4096x2160p24/25/30/50/60.
Cc: Hans Verkuil
Signed-off-by: Martin Bugge
---
include/uapi/linux/v4l2-dv-timings.h | 30 --
1 file changed, 20 insertions(+), 10 deletions(-)
diff --git a
Hi
I hope this is the right list to ask.
I am looking at using dvbv5 for one of my projects. However there are
some fields that I cant seem to get, in particular
tsid
pmt
service_type (TV?Radio etc)
net
netid
example output in VDR format
CBS Drama:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:14
The ov5640 sensor from Omnivision supports up to 2592x1944
and both CSI and MIPI interfaces.
The following driver adds support for the CSI interface only
and VGA, 720p resolutions at 30fps.
Signed-off-by: Javier Martin
---
.../devicetree/bindings/media/i2c/ov5640.txt | 47 +
drivers
Sorry for the unrelated patches,
I will submit this again.
On 30/09/15 09:34, Javier Martin wrote:
The ov5640 sensor from Omnivision supports up to 2592x1944
and both CSI and MIPI interfaces.
The following driver adds support for the CSI interface only
and VGA, 720p resolutions at 30fps
The ov5640 sensor from Omnivision supports up to 2592x1944
and both CSI and MIPI interfaces.
The following driver adds support for the CSI interface only
and VGA, 720p resolutions at 30fps.
Signed-off-by: Javier Martin
---
.../devicetree/bindings/media/i2c/ov5640.txt | 47 +
arch/arm
1 - 100 of 871 matches
Mail list logo
