Hi,
Please refer to the XCEIVE document.
And set the correct SCODE.
>> 380.912010] xc2028 4-0061: Loading SCODE for >>type=DTV6 QAM DTV7 DTV78
>> (What is this type ???)
>>DTV8 ZARLINK456 SCODE HAS_IF_4760
>>(620003e0), id 00000000.
Terry
2010/1/8 Te
: Loading SCODE for type=DTV78 ZARLINK456
SCODE HAS_IF_4760 (62000100), id .
Terry
2010/1/7 Terry Wu :
> Hi,
>
> The following codes in the 6MHz patch are not for 6MHz.
> Please read the mchehab's comments.
> 1.28 /*
> 1.29 -
g if you are
tuning a VHF channel (frequency < 470MHz).
And the above mchehab's new codes will not do "offset -= 50;"
if DTV7 firmware is using.
Terry
2010/1/7 Terry Wu :
> Hi,
>
> And the 6MHz patch you mentioned is a wrong patch.
> h
25;
+ else/* DTV8 or DTV78 */
+ offset = 2750000;
Terry
2010/1/7 Terry Wu :
> Hi,
>
> The 6MHz patch is for Taiwan only.
> It should not change anything for 7MHz and 8MHz.
>
> Terry
>
> 2010/1/7 Robert Lowery :
>&g
Hi,
The 6MHz patch is for Taiwan only.
It should not change anything for 7MHz and 8MHz.
Terry
2010/1/7 Robert Lowery :
>> On Wed, 2010-01-06 at 14:20 +1100, Robert Lowery wrote:
>>> > On Mon, 2010-01-04 at 21:27 -0500, Andy Walls wrote:
>>> >> On Mon, 2010-01-04 at 15:27 +1100, Robert Lo
& 0x7fff8) >> 3);
/* TODO: 23-19 */
}
2. Also, I can not find GPIO functions in the cx25840-core.c
Something missing or unfinished ?
Best Regards,
Terry
2009/6/23 Hans Verkuil :
>
>> On Tue, 2009-06-23 at 11:39 +0800, Terry Wu wrote:
>>> Hi,
>>>
>
Hi,
>>[9.916022] saa7134 :05:01.0: firmware: requesting
>>dvb-fe-tda10048-1.0.fw
>>[ 10.020209] tda10048_firmware_upload: Upload failed. (file not found?)
The dvb-fe-tda10048-1.0.fw is needed.
You can get it from the following links:
http://tw1965.myweb.hinet.net/Linux/firmware.tar.gz
