Hi Eric and Eugen,
On 7/23/19 9:51 AM, eugen.hris...@microchip.com wrote:
On 22.07.2019 19:25, Eric Nelson wrote:
Hi Laura,
On 7/22/19 8:50 AM, Laura Nao wrote:
Thanks Fabio!
I tried tweaking the PLL configuration in the driver and did some
further tests on 5.2 kernel.
I was finally able
Hi Jacopo,
On 7/24/19 4:49 PM, Jacopo Mondi wrote:
Hi Laura,
thanks for addressing this issue.
On Mon, Jul 22, 2019 at 05:50:35PM +0200, Laura Nao wrote:
Thanks Fabio!
I tried tweaking the PLL configuration in the driver and did some further
tests on 5.2 kernel.
I was finally able to
rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
Thanks,
Best,
Laura
On 7/22/19 2:45 PM, Fabio Estevam wrote:
[Adding Steve and Philipp]
On Thu, Jul 18, 2019 at 10:06 AM Laura Nao wrote:
Hello Loic,
I'm having some issues with RAW8 mode on the OV5640 camera and I'd like
to kindl
Hi Loic,
Thanks for your reply.
On 7/19/19 8:56 AM, Loic Poulain wrote:
Hi Laura,
On Thu, 18 Jul 2019 at 15:03, Laura Nao <mailto:laura@kynetics.com>> wrote:
Hello Loic,
I'm having some issues with RAW8 mode on the OV5640 camera and I'd like
to kindly
Hello Loic,
I'm having some issues with RAW8 mode on the OV5640 camera and I'd like
to kindly ask for your advice, as I saw that you added support for RAW
mode in the mainline kernel driver.
I'm trying to capture some raw images on a i.MX6Q based board. I
configured the pipeline as follows:
Hi all,
I'm trying to enable RAW format on a ov5640 camera. I'm using a custom
imx8mm based board, with a 4.14 kernel based on the
rel_imx_4.14.98_2.0.0_ga branch from nxp. I tried capturing some RAW
frames using v4l-utils using the following commands:
- RAW8: v4l2-ctl -d /dev/video0 --verbo
