Like a bunch of other MSI laptops the MS-1039 uses a 0c45:627b
SN9C201 + OV7660 webcam which is mounted upside down.
Add it to the sn9c20x flip_dmi_table to deal with this.
Cc: sta...@vger.kernel.org
Reported-by: Rui Salvaterra
Signed-off-by: Hans de Goede
---
drivers/media/usb/gspca
Hi,
On 17-04-19 13:41, Ricardo Ribalda Delgado wrote:
We have passed the barrier of 64 supported formats, therefore a int64_t
is not enough for holding the bitfield.
Instead use bit-ops ala kernel.
Signed-off-by: Ricardo Ribalda Delgado
Suggested-by: Hans de Goede
Thank you.
I've dr
Add AM_GNU_GETTEXT_VERSION([0.19.8]) so that autoreconf will properly
run autopoint instead of failing because build-aux/config.rpath is
not copied.
Signed-off-by: Hans de Goede
---
configure.ac | 1 +
1 file changed, 1 insertion(+)
diff --git a/configure.ac b/configure.ac
index 4970eece
Hi Ricardo,
On 16-04-19 14:02, Ricardo Ribalda Delgado wrote:
NV12 is a two-plane version YUV 4:2:0, where the U and V components
are subsampled 2x2.
Signed-off-by: Ricardo Ribalda Delgado
Your patch looks good to me, but it pushed the array-size of
the supported_src_pixfmts array over 64 en
y task. I *suspect* that those cameras are all
MJPEG-A, as the libv4l decoder uses tinyjpeg library to handle both
JPEG and MJPEG.
Maybe Hans de Goede knows more about that, and may have actually tested
it with different camera models.
I've tested the JPG path in libv4l with quite a lot of
Ribalda Delgado
Patch looks good to me now:
Acked-by: Hans de Goede
Regards,
Hans
---
lib/libv4lconvert/bayer.c | 21
lib/libv4lconvert/libv4lconvert-priv.h | 4 +++
lib/libv4lconvert/libv4lconvert.c | 35 ++
3 files changed, 60
Hi,
On 21-09-18 09:40, Ricardo Ribalda Delgado wrote:
Hi Hans
On Fri, Sep 21, 2018 at 9:38 AM Hans de Goede wrote:
Hi,
On 20-09-18 22:04, Ricardo Ribalda Delgado wrote:
Add support for 10 bit packet Bayer formats:
-V4L2_PIX_FMT_SBGGR10P
-V4L2_PIX_FMT_SGBRG10P
-V4L2_PIX_FMT_SGRBG10P
Hi,
On 20-09-18 22:04, Ricardo Ribalda Delgado wrote:
Add support for 10 bit packet Bayer formats:
-V4L2_PIX_FMT_SBGGR10P
-V4L2_PIX_FMT_SGBRG10P
-V4L2_PIX_FMT_SGRBG10P
-V4L2_PIX_FMT_SRGGB10P
These formats pack the 2 LSBs for every 4 pixels in an indeppendent
byte.
Signed-off-by: Ricardo Ribald
Hi,
On 18-07-18 13:53, Carlos Garnacho wrote:
Hey,
On Wed, Jul 11, 2018 at 9:51 PM, Hans de Goede wrote:
Hi,
On 11-07-18 20:26, Carlos Garnacho wrote:
Hi!,
On Wed, Jul 11, 2018 at 7:41 PM, Hans de Goede
wrote:
Hi,
On 11-07-18 18:07, Carlos Garnacho wrote:
Hi!,
On Wed, Jul 11
Hi,
On 11-07-18 20:26, Carlos Garnacho wrote:
Hi!,
On Wed, Jul 11, 2018 at 7:41 PM, Hans de Goede wrote:
Hi,
On 11-07-18 18:07, Carlos Garnacho wrote:
Hi!,
On Wed, Jul 11, 2018 at 2:41 PM, Hans de Goede
wrote:
HI,
On 11-07-18 14:08, Laurent Pinchart wrote:
Hi Carlos,
On
Hi,
On 11-07-18 18:07, Carlos Garnacho wrote:
Hi!,
On Wed, Jul 11, 2018 at 2:41 PM, Hans de Goede wrote:
HI,
On 11-07-18 14:08, Laurent Pinchart wrote:
Hi Carlos,
On Wednesday, 11 July 2018 14:36:48 EEST Carlos Garnacho wrote:
On Wed, Jul 11, 2018 at 1:00 PM, Laurent Pinchart wrote
HI,
On 11-07-18 14:08, Laurent Pinchart wrote:
Hi Carlos,
On Wednesday, 11 July 2018 14:36:48 EEST Carlos Garnacho wrote:
On Wed, Jul 11, 2018 at 1:00 PM, Laurent Pinchart wrote:
On Wednesday, 11 July 2018 11:37:14 EEST Hans de Goede wrote:
Hi Laurent,
At Guadec Carlos (in the Cc) told me
Hi Laurent,
At Guadec Carlos (in the Cc) told me that on his Acer 2-in-1 only
the frontcam is working and it seems both are represented by a
single UVC USB device. I've told him to check for some v4l control
to flip between front and back.
Carlos, as I mentioned you can try gtk-v4l
("sudo dnf in
Hi,
On 05/13/2018 07:54 PM, Adam Baker wrote:
On 05/05/18 09:22, Hans de Goede wrote:
The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some
gspca sub-drivvers are using GFP_DMA to allocate buffers which are used
for USB bulk transfers, there is absolutely no nee
Hi,
On 05/13/2018 11:32 AM, Hans Verkuil wrote:
On 05/12/2018 08:00 PM, Hans de Goede wrote:
Hi Hans,
Overall looks good, 1 comment inline.
- if (ret == 0 && gspca_dev->sd_desc->dq_callback) {
- mutex_lock(&gspca_dev->usb_lock);
- g
l2_buf, &frame->v4l2_buf, sizeof *v4l2_buf);
- gspca_dbg(gspca_dev, D_FRAM, "dqbuf %d\n", j);
- ret = 0;
-
- if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
- if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
-
.
However, at least the UVC 1.5 Realtek RTS5847/RTS5852 cameras have
been reported to work well.
Signed-off-by: ming_qian
Tested-by: Kai-Heng Feng
Looks good to me:
Reviewed-by: Hans de Goede
Regards,
Hans
---
drivers/media/usb/uvc/uvc_video.c | 4
1 file changed, 4 insertions
The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some
gspca sub-drivvers are using GFP_DMA to allocate buffers which are used
for USB bulk transfers, there is absolutely no need for this, drop it.
Cc: "Luis R. Rodriguez"
Signed-off-by: Hans de Goede
--
Hi Hans, et. al.,
While debugging another GFP_DMA32 problem I did a quick
grep for GFP_DMA32 on the kernel, this result stood out:
drivers/media/platform/vivid/vivid-osd.c
373:dev->video_vbase = kzalloc(dev->video_buffer_size, GFP_KERNEL |
GFP_DMA32);
Because it is making the same mistake
.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1508706
Signed-off-by: Hans de Goede
---
lib/libv4lconvert/libv4lconvert-priv.h | 2 ++
lib/libv4lconvert/libv4lconvert.c | 9 -
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/lib/libv4lconvert/libv4lconvert-priv.h
b
/0x280
[ 19.811828] driver_probe_device+0x2ff/0x450
Fixes: "staging: atomisp: use clock framework for camera clocks"
Signed-off-by: Hans de Goede
---
.../media/atomisp/platform/intel-mid/atomisp_gmin_platform.c | 7 +++
1 file changed, 7 insertions(+)
diff --git
a/drive
Hi,
On 05/28/2017 02:30 PM, Hans de Goede wrote:
Hi All,
I've been trying to get the atomisp driver from staging to work
on a couple of devices I have.
I started with an Asus T100TA after fixing 2 oopses in the sensor
driver there I found out that the BIOS does not allow to put the
ISP i
tracking if
hmm_init has been called. Not pretty, but it gets the job done,
eventually we should be able to remove the hmm_init call from
hmm_alloc.
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/pci/atomisp2/hmm/hmm.c | 6 +-
1 file changed, 5 insertions(+), 1 deletion(-)
diff
Hi,
On 28-05-17 19:08, Alan Cox wrote:
On Sun, 28 May 2017 14:30:35 +0200
Hans de Goede wrote:
Do not call dev_warn with a NULL device, this silence the following 2
warnings:
[ 14.392194] (NULL device *): Failed to find gmin variable gmin_V2P8GPIO
[ 14.392257] (NULL device *): Failed to
There is no reason for all this printk spamming and certainly
not at an error log level.
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/i2c/ov2680.c | 7 ++-
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.c
b/drivers
using the probing of the driver to file.
This commit ignore the return value of the gpio1_ctrl call, fixing this.
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/i2c/ov2680.c | 7 ---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/staging/media/atomis
efivar_entry struct we kzalloc as arguments to efivar_entry_get(),
which is how all the other callers of efivar_entry_get() do this.
Signed-off-by: Hans de Goede
---
.../atomisp/platform/intel-mid/atomisp_gmin_platform.c | 17 +
1 file changed, 9 insertions(+), 8 deletions(-)
diff
comments
in the source indicate, the check for these 2 special gmin variables with
a NULL device is a workaround for 2 specific evaluation boards, so
completely silencing the missing warning for these actually is a good
thing.
Signed-off-by: Hans de Goede
---
.../staging/media/atomisp/platform
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/i2c/ov2680.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/media/atomisp/i2c/ov2680.c
b/drivers/staging/media/atomisp/i2c/ov2680.c
index 566091035c64..449aa2aa276f 100644
--- a/drivers/staging/media/atomisp/i2c
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/i2c/gc0310.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/staging/media/atomisp/i2c/gc0310.c
b/drivers/staging/media/atomisp/i2c/gc0310.c
index 1ec616a15086..350fd7fd5b86 100644
--- a/drivers/staging/media/atomisp/i2c
menu controls are not allowed to have a step size, set step to 0 to
fix an oops from the WARN_ON in v4l2_ctrl_new_custom() triggering
because of this.
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/i2c/mt9m114.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a
Hi All,
I've been trying to get the atomisp driver from staging to work
on a couple of devices I have.
I started with an Asus T100TA after fixing 2 oopses in the sensor
driver there I found out that the BIOS does not allow to put the
ISP in PCI mode and that there is no code to drive it in ACPI
e cannot do as the error suggests since b is evaluated multiple times.
This commit fixes these compile errors.
Signed-off-by: Hans de Goede
---
drivers/staging/media/atomisp/pci/atomisp2/atomisp_compat_css20.c | 1 -
.../pci/atomisp2/css2400/hive_isp_css_include/math_support.h| 6 +++---
Hi,
On 04-07-16 15:20, Hans Verkuil wrote:
Hans de Goede has no more time to work on those, so I'll take over.
For gspca/pwc I'll do 'Odd Fixes', for radio-shark I'll be a
full maintainer.
Signed-off-by: Hans Verkuil
Thanks!
Acked-by: Hans de Goede
Regards,
Hans
Hi,
On 04-07-16 09:36, Hans Verkuil wrote:
Hi Hans,
On 07/03/2016 11:31 PM, Hans de Goede wrote:
Hi All,
Admittedly I've not been all that active as gspca and pwc
maintainer lately, but officially I'm still the maintainer
for both.
Between my $dayjob, other foss projects and la
Hi All,
Admittedly I've not been all that active as gspca and pwc
maintainer lately, but officially I'm still the maintainer
for both.
Between my $dayjob, other foss projects and last but not
least spending time with my wife and children I'm way too busy
lately.
So I'm hereby officially steppin
Hi Arnd,
On 26-01-16 15:09, Arnd Bergmann wrote:
When CONFIG_INPUT is disabled, multiple gspca backend drivers
print compile-time warnings about unused variables:
media/usb/gspca/cpia1.c: In function 'sd_stopN':
media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd'
[-Werror=unused-varia
Hi,
On 16-07-15 00:51, valdis.kletni...@vt.edu wrote:
I encountered a user who was having troubles getting a PlayStation EyeToy
(USB ID 054c:0155) working as a webcam. They reported that repeated attempts
would often make it work. Looking at the code, there was support for
repeated attempts at
Hi,
It is probably best to resend this mail to
linux-usb
since this is more of a usb problem then a v4l2 problem,
and all the usb experts are subscribed to that list.
Regards,
Hans
On 07-04-16 17:36, Matthew Giassa wrote:
Good day,
I maintain an SDK for USB2.0 and USB3.0 U3V machine visio
Hi,
On 14-03-16 16:02, Antonio Ospite wrote:
On Thu, 10 Mar 2016 15:54:37 +0100
Hans de Goede wrote:
Hi,
On 09-03-16 17:03, Antonio Ospite wrote:
When calling VIDIOC_REQBUFS v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(476): q.reqbufs(node, 1)
test
rmats which apps are unlikely to support
natively, so yes it is correct to set it.
Patch looks good to me:
Acked-by: Hans de Goede
Hans Verkuil, if you're happy with this version feel free to push it.
Regards,
Hans
Changes since v1
- Add NV61 support
- Fixed s/YUVU/YUYV/g
Hi,
On 09-03-16 17:03, Antonio Ospite wrote:
v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(512): Expected EBUSY, got 22
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
Looking at the v4l2-compliance code reveals that this failure is about
the read() callback.
In gs
Hi,
On 09-03-16 17:03, Antonio Ospite wrote:
When calling VIDIOC_REQBUFS v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(476): q.reqbufs(node, 1)
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL
By looking at the v4l2-compliance code the failure happens when trying
to
Hi Ulrik,
On 06-03-16 14:50, Ulrik de Muelenaere wrote:
Hello,
The Kinect produces both a video and depth stream, but the current
implementation of the
gspca_kinect subdriver requires a depth_mode parameter at probe time to select
one of
the streams which will be exposed as a v4l device. This
Hans de Goede redhat.com> writes:
>
> Hi Gregor,
>
> Here is a patch to add "PEGATRON CORPORATION" to asus_board_vendor,
> to fix an upside down bug reported to Fedora:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1311545
>
> I'm not 100% sur
Hi TJ,
On 12/18/2015 12:48 PM, TJ wrote:
I've been trying to get the 0c45:6270 Vehoh VMS-001 'Discovery' Microscope to
work correctly and discovered what seem to be differences in the bridge_init
and other control commands. The most obvious difference currently is the LEDs
do not turn on, but
media] rc: add sunxi-ir driver")
Signed-off-by: Chen-Yu Tsai
Good catch:
Acked-by: Hans de Goede
Regards,
Hans
---
drivers/media/rc/sunxi-cir.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index 7830aef3db45..40
Hi,
On 19-10-15 18:43, Insu Yun wrote:
create_singlethread_workqueue can be failed in memory pressue.
So, check return value and return -ENOMEM
Signed-off-by: Insu Yun
---
drivers/media/usb/gspca/sq905.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/media/usb/gspca/sq905.c b
Hi,
On 19-10-15 17:24, Insu Yun wrote:
Since thread creation can be failed, check return value of
kthread_create and handle an error.
Signed-off-by: Insu Yun
---
drivers/media/usb/gspca/m5602/m5602_s5k83a.c | 8 +++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/m
reset the camera to.
Signed-off-by: Antonio Ospite
Cc: sta...@vger.kernel.org
Good catch:
Reviewed-by: Hans de Goede
Mauro can you pick this one up directly, and include it in your
next pull-req for 4.3 please ?
Regards,
Hans
---
Hi,
I think the problem in the gspca subdrivers has always
Hi,
On 08-09-15 16:36, Alan Stern wrote:
On Tue, 8 Sep 2015, Hans de Goede wrote:
Hi,
On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
urb completion callback is executed in host controllers interrupt
context. To keep preempt disable time short, add urbs to a list on
completion and
Hi,
On 09/07/2015 06:23 PM, Mian Yousaf Kaukab wrote:
urb completion callback is executed in host controllers interrupt
context. To keep preempt disable time short, add urbs to a list on
completion and schedule work to process the list.
Moreover, save timestamp and sof number in the urb complet
Hi,
On 07-06-15 16:34, Nicholas Mc Guire wrote:
API compliance scanning with coccinelle flagged:
./drivers/media/usb/gspca/m5602/m5602_s5k83a.c:180:9-25:
WARNING: timeout (100) seems HZ dependent
Numeric constants passed to schedule_timeout() make the effective
timeout HZ dependent whi
Hi Mauro,
Here are 2 minor fixes for gspca for 4.3.
The following changes since commit 77a3c6fd90c94f635edb00d4a65f485687538791:
[media] vb2: Don't WARN when v4l2_buffer.bytesused is 0 for multiplanar
buffers (2015-06-22 09:52:58 -0300)
are available in the git repository at:
git://linux
Hi,
On 04-06-15 10:52, Dan Carpenter wrote:
We already know status is negative because of the earlier check so there
is no need to check again.
Signed-off-by: Dan Carpenter
Makes sense:
Acked-by: Hans de Goede
Mauro, can you pick this one up directly please?
Regards,
Hans
diff
Hi Mauro,
Here is a new pull-req for the new camera support for the gspca sn9c2028
driver, now with
my S-o-b added and the copyright change dropped.
The following changes since commit 2a80f296422a01178d0a993479369e94f5830127:
[media] dvb-core: fix 32-bit overflow during bandwidth calculation
Hi,
On 20-05-15 14:12, Mauro Carvalho Chehab wrote:
Em Fri, 24 Apr 2015 10:04:03 +0300
Vasily Khoruzhick escreveu:
This cam seems to return different values on long commands, so make status check
in sn9c2028_long_command() more tolerant. Anyway, read value isn't used anywhere
later.
Signed-o
Hi Mauro,
Please pull from my tree for new camera support for the gspca sn9c2028 driver.
The following changes since commit 0fae1997f09796aca8ada5edc028aef587f6716c:
[media] dib0700: avoid the risk of forgetting to add the adapter's size
(2015-05-14 19:31:34 -0300)
are available in the git
Hi Vasily
On 15-05-15 17:55, Vasily Khoruzhick wrote:
Ping?
Sorry for being a bit slow on this one, v2 looks good. I'll queue it up for
merging into 4.2 as soon as I find some time to work on this,
Regards,
Hans
On Fri, Apr 24, 2015 at 10:04 AM, Vasily Khoruzhick wrote:
This cam seems t
tions(+), 98 deletions(-)
Patch set looks good to me:
Acked-by: Hans de Goede
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi,
On 19-04-15 20:52, Vasily Khoruzhick wrote:
Autogain algorithm is very simple, if average luminance is low - increase gain,
if it's high - decrease gain. Gain granularity is low enough for this algo to
stabilize quickly.
Signed-off-by: Vasily Khoruzhick
---
drivers/media/usb/gspca/sn9c20
Hi Vasily,
Thanks for the patches.
On 19-04-15 20:52, Vasily Khoruzhick wrote:
Signed-off-by: Vasily Khoruzhick
---
drivers/media/usb/gspca/sn9c2028.c | 120 -
1 file changed, 119 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/gspca/sn9c2028
Hi,
On 26-03-15 17:17, Ricardo Ribalda Delgado wrote:
Y16 is a little-endian format. The original implementation assumed that
it was big-endian.
Signed-off-by: Ricardo Ribalda Delgado
Thanks merged upstream, both into master and stable-1.6 branches.
Regards,
Hans
---
lib/libv4lconvert/
Hi,
On 27-03-15 09:29, Benjamin Gaignard wrote:
Hello,
On behalf of Paramanand, I would have to have your opinion on this patch.
The goal is to enable more v4l2 lib features on Android to be able to
do video decoding using v4l2 devices.
This looks fine to me, you say that
"I would have to hav
Hi Mauro,
Here is a small build-fix for gspca for 4.0.
The following changes since commit a3dfc6d925ca1bbd1a228253acb93f08657bad25:
[media] dvb-usb: create one media_dev per adapter (2015-02-26 09:52:26 -0300)
are available in the git repository at:
git://linuxtv.org/hgoede/gspca.git medi
; patch for this looks good to me and is:
Acked-by: Hans de Goede
Mauro, thanks for picking this one up.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi,
On 01/29/2015 09:25 PM, Mauro Carvalho Chehab wrote:
> Checkpatch complained about a few issues, like FSF address. Also,
> multi-line comments are not following the Kernel CodingStyle.
>
> While not too late, let's fix those issues.
>
> Cc: John McMaster
> Cc: H
Hi,
On 01/29/2015 09:36 PM, Mauro Carvalho Chehab wrote:
> Em Thu, 15 Jan 2015 11:52:14 +0100
> Hans de Goede escreveu:
>
>> Hi Mauro,
>>
>> Note this pull-req superseeds my previous pull-req for 3.20 .
>
> Hmm... I ended by applying the previous pull request.
(2015-01-28 09:06:50 +0100)
Antonio Ospite (1):
gspca_stv06xx: enable button found on some Quickcam Express variant
Hans Verkuil (1):
pwc: fix WARN_ON
Hans de Goede (3):
rc: sunxi-cir: Add support for an optional
Hi,
On 26-01-15 11:38, Luca Bonissi wrote:
Hi!
I found a problem on vc032x gspca usb webcam subdriver: "bytesperline" property
is wrong for YUYV and YVYU formats.
With recent v4l-utils library (>=0.9.1), that uses "bytesperline" for pixel
format conversion, the result is a wrong jerky image.
Hi,
On 19-01-15 15:10, Chen-Yu Tsai wrote:
Hi,
On Sat, Dec 20, 2014 at 6:20 PM, Hans de Goede wrote:
Hi,
On 19-12-14 19:17, Maxime Ripard wrote:
Hi,
On Thu, Dec 18, 2014 at 09:50:26AM +0100, Hans de Goede wrote:
Hi,
On 18-12-14 03:48, Chen-Yu Tsai wrote:
Hi,
On Thu, Dec 18, 2014
Hi,
On 07-01-15 12:04, Dan Carpenter wrote:
"n" is a user controlled integer. The code here doesn't handle the case
where "n" is negative and this causes a static checker warning.
drivers/media/usb/gspca/gspca.c:1571 vidioc_s_parm()
warn: no lower bound on 'n'
Signed-off-by: D
Hi,
On 06-01-15 21:59, Antonio Ospite wrote:
On Tue, 28 Oct 2014 15:39:41 +0100
Antonio Ospite wrote:
On Mon, 14 Jul 2014 12:27:57 +0200
Hans de Goede wrote:
Hi,
On 07/11/2014 02:56 PM, Antonio Ospite wrote:
Signed-off-by: Antonio Ospite
Thanks, I've added this to my tree and s
Hi,
On 04-01-15 16:29, Antonio Ospite wrote:
On Mon, 29 Dec 2014 11:00:03 -0400
Joe Howse wrote:
Add support in the PS3 Eye driver for QVGA capture at higher
frame rates: 187, 150, and 137 FPS. This functionality is valuable
because the PS3 Eye is popular for computer vision projects and no
o
11:46:17 +0100)
Antonio Ospite (1):
gspca_stv06xx: enable button found on some Quickcam Express variant
Hans Verkuil (1):
pwc: fix WARN_ON
Hans de Goede (3):
rc: sunxi-cir: Add support for an optional reset
Hi,
On 02-10-14 01:10, Luis Henriques wrote:
Label err_video_unreg in function usb_pwc_probe() is only used when
CONFIG_USB_PWC_INPUT_EVDEV is defined.
drivers/media/usb/pwc/pwc-if.c:1104:1: warning: label 'err_video_unreg' defined
but not used [-Wunused-label]
Signed-off-by: Luis Henriques
Hi John,
On 01-12-14 03:27, John McMaster wrote:
Adds support for AmScope MU800 / ToupTek UCMOS08000KPB USB microscope camera.
Signed-off-by: John McMaster
Thanks, I've added this driver to my gspca tree, and asked Mauro to
queue it up for 3.20.
Regards,
Hans
---
drivers/media/usb/gspc
)
Hans de Goede (2):
rc: sunxi-cir: Add support for an optional reset controller
rc: sunxi-cir: Add support for the larger fifo found on sun5i and sun6i
John McMaster (1):
gspca_touptek: Add support for ToupTek UCMOS series USB cameras
.../devicetree
Hi,
On 05-01-15 10:08, Maxime Ripard wrote:
Hi,
On Mon, Dec 22, 2014 at 02:46:12PM +0100, Hans de Goede wrote:
On 21-12-14 23:39, Maxime Ripard wrote:
On Sat, Dec 20, 2014 at 11:24:55AM +0100, Hans de Goede wrote:
Given your previous changes, you should also update the enable-method
Hi,
On 21-12-14 23:39, Maxime Ripard wrote:
On Sat, Dec 20, 2014 at 11:24:55AM +0100, Hans de Goede wrote:
Hi,
On 19-12-14 19:34, Maxime Ripard wrote:
On Wed, Dec 17, 2014 at 06:18:23PM +0100, Hans de Goede wrote:
Add a dtsi file for A31s based boards.
Since the A31s is the same die as
Hi,
On 19-12-14 19:24, Maxime Ripard wrote:
Hi,
On Wed, Dec 17, 2014 at 06:18:17PM +0100, Hans de Goede wrote:
With the prcm in sun6i (and some later SoCs) some mod0 clocks are instantiated
through the mfd framework, and as such do not work with of_clk_declare, since
they do not have
Hi,
On 19-12-14 19:34, Maxime Ripard wrote:
On Wed, Dec 17, 2014 at 06:18:23PM +0100, Hans de Goede wrote:
Add a dtsi file for A31s based boards.
Since the A31s is the same die as the A31 in a different package, this dtsi
simply includes sun6i-a31.dtsi and then overrides the pinctrl
Hi,
On 19-12-14 19:17, Maxime Ripard wrote:
Hi,
On Thu, Dec 18, 2014 at 09:50:26AM +0100, Hans de Goede wrote:
Hi,
On 18-12-14 03:48, Chen-Yu Tsai wrote:
Hi,
On Thu, Dec 18, 2014 at 1:18 AM, Hans de Goede wrote:
On sun6i the cir block is attached to the reset controller, add support
for
Hi,
On 18-12-14 09:41, Lee Jones wrote:
On Wed, 17 Dec 2014, Hans de Goede wrote:
Add support for the ir-clk which is part of the sun6i SoC prcm module.
Signed-off-by: Hans de Goede
---
drivers/mfd/sun6i-prcm.c | 14 ++
1 file changed, 14 insertions(+)
Pretty standard stuff
Hi,
On 18-12-14 03:48, Chen-Yu Tsai wrote:
Hi,
On Thu, Dec 18, 2014 at 1:18 AM, Hans de Goede wrote:
On sun6i the cir block is attached to the reset controller, add support
for de-asserting the reset if a reset controller is specified in dt.
Signed-off-by: Hans de Goede
Acked-by: Mauro
Add support for the ir-clk which is part of the sun6i SoC prcm module.
Signed-off-by: Hans de Goede
---
drivers/mfd/sun6i-prcm.c | 14 ++
1 file changed, 14 insertions(+)
diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
index 2f2e9f0..1911731 100644
--- a/drivers
Add a dtsi file for A31s based boards.
Since the A31s is the same die as the A31 in a different package, this dtsi
simply includes sun6i-a31.dtsi and then overrides the pinctrl compatible to
reflect the different package, everything else is identical.
Signed-off-by: Hans de Goede
---
Changes
one.
Signed-off-by: Hans de Goede
Acked-by: Mauro Carvalho Chehab
Acked-by: Maxime Ripard
---
.../devicetree/bindings/media/sunxi-ir.txt | 2 +-
drivers/media/rc/sunxi-cir.c| 21 -
2 files changed, 13 insertions(+), 10 deletions(-)
-a31-r.c, as the
prcm pins are identical between the A31 and the A31s.
Signed-off-by: Hans de Goede
---
Changes in v2:
-Sync i2c3 muxing with v2 of "pinctrl: sun6i: Add some missing functions"
-Add myself to the copyright header
---
.../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 1
The CSQ CS908 is an A31s based top-set box, with 1G RAM, 8G NAND,
rtl8188etv usb wifi, 2 USB A receptacles (1 connected through the OTG
controller), ethernet, 3.5 mm jack with a/v out and hdmi out.
Note it has no sdcard slot and therefore can only be fel booted.
Signed-off-by: Hans de Goede
On sun6i the cir block is attached to the reset controller, add support
for de-asserting the reset if a reset controller is specified in dt.
Signed-off-by: Hans de Goede
Acked-by: Mauro Carvalho Chehab
Acked-by: Maxime Ripard
---
.../devicetree/bindings/media/sunxi-ir.txt | 2
Add a node for the ir receiver found on the A31.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 1c1d255..85c6365 100644
--- a/arch/arm
Add pinmux settings for the ir receive pin of the A31.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 85c6365..9e9504c 100644
--- a/arch/arm
Add an ir_clk sub-node to the prcm node.
Signed-off-by: Hans de Goede
---
Changes in v2:
-Use allwinner,sun4i-a10-mod0-clk as compatible, rather then a prcm specific
compatible
---
arch/arm/boot/dts/sun6i-a31.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts
The Mele M9 has an ir receiver, enable it.
Signed-off-by: Hans de Goede
---
arch/arm/boot/dts/sun6i-a31-m9.dts | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts
b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 3ab544f..fccf709 100644
--- a/arch/arm/boot/dts
of_clk_declare mod0 clk
setup method, and also register mod0-clk support as a platform driver to work
properly with mfd instantiated mod0 clocks.
Signed-off-by: Hans de Goede
---
drivers/clk/sunxi/clk-mod0.c | 41 -
1 file changed, 36 insertions(+), 5 deletions(-)
diff
So far the A31s is 100% compatible with the A31, still lets do the same
as what we've done for the A13 / A10s and give it its own compatible string,
in case we need to differentiate later.
Signed-off-by: Hans de Goede
---
Documentation/arm/sunxi/README | 1 -
arch/arm/mach-sunxi/platsmp.c
While working on pinctrl for the A31s, I noticed that function 4 of
PA15 - PA18 was missing, add these.
Signed-off-by: Hans de Goede
---
Changes in v2:
-Drop the changes to the muxing of i2c3 this was based on
"A31s Datasheet v1.40.pdf", but all other A31 related info puts them at
Hi All,
Here is v2 of my patch series to add sun6i A31s and ir support.
Changes in v2:
-"pinctrl: sun6i: Add some missing functions, fix i2c3 muxing":
-Drop the changes to the muxing of i2c3 this was based on
"A31s Datasheet v1.40.pdf", but all other A31 related info puts the
Hi,
On 14-12-14 15:24, Nicolas Dufresne wrote:
Le 2014-12-14 04:49, Hans de Goede a écrit :
Ah yes I see, so I assume that if libv4l where to return a failure for
CREATE_BUFS when conversion is used, that gstreamer will then fallback to
a regular REQUEST_BUFS call ?
Then that indeed seems
1 - 100 of 1074 matches
Mail list logo
