Hi Laurent,
Thanks for the patch.
On Fri, Aug 19, 2011 at 08:14:20AM +0200, Laurent Pinchart wrote:
> NV24 and NV42 are planar YCbCr 4:4:4 and YCrCb 4:4:4 formats with a
> luma plane followed by an interleaved chroma plane.
>
> Signed-off-by: Laurent Pinchart
> ---
> Documentation/DocBook/medi
On 08/19/2011 06:16 PM, Sakari Ailus wrote:
> Sylwester Nawrocki wrote:
>> On 08/18/2011 09:02 PM, Sakari Ailus wrote:
>>>
>>> He-h, I guess you are not going to apply this one.
>>> The patch breaks init logic of the device. If we have no ->power(), we
>>> still need to bring the de
On Fri, Aug 19, 2011 at 07:16:59PM +0300, Sakari Ailus wrote:
[clip]
> > I'm afraid your requirements are too demanding :)
> > Yes, I meant creating a new regulator. In case the ADP1635 voltage regulator
> > is inhibited through a GPIO at a host processor such regulator would in fact
> > be only fl
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Aug 19 19:00:30 CEST 2011
git hash:9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e
gcc version: i686-linux-gcc (GCC) 4.6
On Fri, Aug 19, 2011 at 4:05 AM, Jan Pohanka wrote:
> Hi all,
>
> I'm playing with i.mx27 processor by Freescale, namely with ipcam reference
> design. There is unfortunately no support available for this hw this time so
> I have adapted a kernel from Pengutronix Oselas distribution (available her
Jan,
On Fri, Aug 19, 2011 at 4:05 AM, Jan Pohanka wrote:
...
> However, there is also an issue with resolution. This works up to 640x480.
> For example for 800x600 i'm getting this error message
> WARNING: erroneous pipeline: could not link ffmpegcsp0 to mfwgstvpu_enc0
MX27 can decode/encode up
On Wed, 10 Aug 2011 12:05:20 +0200
Florian Mickler wrote:
> dvb_usb_device_init calls the frontend_attach method of this driver which
> uses vp7045_usb_ob. In order to have a buffer ready in vp7045_usb_op, it has
> to
> be allocated before that happens.
>
> Luckily we can use the whole private
Sylwester Nawrocki wrote:
> On 08/18/2011 09:02 PM, Sakari Ailus wrote:
>>
>> He-h, I guess you are not going to apply this one.
>> The patch breaks init logic of the device. If we have no ->power(), we
>> still need to bring the device to the known state. I have no good idea
>>
2011/8/17 Antti Palosaari :
> On 08/17/2011 10:36 AM, Josu Lazkano wrote:
>> I don't know how wide is the stream, but it could be a USB wide
>> limitation. My board is a little ION based and I have some USB
>> devices:
>> $ lsusb
>> Bus 001 Device 002: ID 1b80:e399 Afatech
>> Bus 001 Device 001: ID
From: KAMEZAWA Hiroyuki
Memory hotplug is a logic for making pages unused in the specified
range of pfn. So, some of core logics can be used for other purpose
as allocating a very large contigous memory block.
This patch moves some functions from mm/memory_hotplug.c to
mm/page_isolation.c. This
Hello again,
This is yet another round of Contiguous Memory Allocator patches. Now I
implemented all the ideas that has been discussed during Linaro Sprint
meeting.
This version provides a solution for complete integration of CMA to DMA
mapping subsystem on ARM architecture. The issue caused by d
From: Michal Nazarewicz
The MIGRATE_CMA migration type has two main characteristics:
(i) only movable pages can be allocated from MIGRATE_CMA
pageblocks and (ii) page allocator will never change migration
type of MIGRATE_CMA pageblocks.
This guarantees that page in a MIGRATE_CMA page block can
a
This patch is an example how device private CMA area can be activated.
It creates one CMA region and assigns it to the first s5p-fimc device on
Samsung Goni S5PC110 board.
Signed-off-by: Marek Szyprowski
Signed-off-by: Kyungmin Park
---
arch/arm/mach-s5pv210/mach-goni.c |4
1 files cha
This patch adds support for CMA to dma-mapping subsystem for ARM
architecture. By default a global CMA area is used, but specific devices
are allowed to have their private memory areas if required (they can be
created with dma_declare_contiguous() function during board
initialization).
Contiguous
The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.
CMA grabs memory on system boot, marks it with CMA_MIGRATE_TYPE and
gives back to the system. Kernel is allowed to allocate movable pages
within CMA's manag
From: Michal Nazarewicz
This commit adds the alloc_contig_range() function which tries
to allecate given range of pages. It tries to migrate all
already allocated pages that fall in the range thus freeing them.
Once all pages in the range are freed they are removed from the
buddy system thus all
From: Michal Nazarewicz
This commit changes various functions that change pages and
pageblocks migrate type between MIGRATE_ISOLATE and
MIGRATE_MOVABLE in such a way as to allow to work with
MIGRATE_CMA migrate type.
Signed-off-by: Michal Nazarewicz
Signed-off-by: Kyungmin Park
Signed-off-by:
From: KAMEZAWA Hiroyuki
This commit introduces alloc_contig_freed_pages() function
which allocates (ie. removes from buddy system) free pages
in range. Caller has to guarantee that all pages in range
are in buddy system.
Along with this function, a free_contig_pages() function is
provided which
From: Vaibhav Hiremath
Fix the build break caused when CONFIG_MEDIA_CONTROLLER
option is disabled and if any sensor driver has to be used
between MC and non MC framework compatible devices.
For example,if tvp514x video decoder driver migrated to
MC framework is being built without CONFIG_MEDIA_C
Hi Sakari,
On 08/18/2011 10:32 PM, Sakari Ailus wrote:
In order to let the host drivers query or configure subdevs with
required frame buffer size one of the following changes could be done
at V4L2 API:
1. Add a 'sizeimage' field in struct v4l2_mbus_framefmt and make subdev
>>
Hi,
On Friday 19 August 2011 04:13:23 CJ wrote:
> Hi,
>
> I am trying to get the mt9p031 working from nand with a ubifs file
> system and I am having a few problems.
>
> /dev/media0 is not present unless I run:
> #mknod /dev/media0 c 251 0
> #chown root:video /dev/media0
>
> #media-ctl -p
> Enu
Signed-off-by: Laurent Pinchart
---
arch/arm/mach-shmobile/board-ag5evm.c |2 +-
arch/arm/mach-shmobile/board-ap4evb.c |4 +-
arch/arm/mach-shmobile/board-mackerel.c |4 +-
drivers/video/sh_mobile_lcdcfb.c| 342 ---
include/video/sh_mobile_lcdc
NV24 and NV42 are planar YCbCr 4:4:4 and YCrCb 4:4:4 formats with a
luma plane followed by an interleaved chroma plane.
Signed-off-by: Laurent Pinchart
---
Documentation/DocBook/media/v4l/pixfmt-nv24.xml | 128 +++
Documentation/DocBook/media/v4l/pixfmt.xml |1 +
in
This API will be used to support YUV frame buffer formats in a standard
way.
Last but not least, create a much needed fbdev API documentation and
document the format setting APIs.
Signed-off-by: Laurent Pinchart
---
Documentation/fb/api.txt | 299 ++
Hi everybody,
Here's the second version of the fbdev FOURCC-based format configuration API.
Compared to the previous version, I've removed the FB_VMODE_FOURCC bit (FOURCC
mode is now selected by a grayscale value > 1), reorganized the union in the
fb_var_screeninfo structure, and added a colorspa
On Thu, 18 Aug 2011 12:31:51 +0200
Damien Cassou wrote:
> my Logitech QuickCam Communicate STX works perfectly well for a few
> minutes when I use it. However, after that the image is frozen and I
> can't make it work again until I reboot the system (before rebooting,
> the webcam has a blue colo
Hi all,
I'm playing with i.mx27 processor by Freescale, namely with ipcam
reference design. There is unfortunately no support available for this hw
this time so I have adapted a kernel from Pengutronix Oselas distribution
(available here
ftp://ftp.phytec.de/pub/Products/phyCORE-iMX27/Linu
27 matches
Mail list logo
