> Nat Geo HD and Histoy Channel HD are the only two HD channels I can
> lock, and I have problems with digital artefacts, lines across the
> screen missing data and tons of errors from the frontend. See below for
> error log.
Hi Jonas,
just guessing - try another card slot. If there are more devic
On Sun, 25 Jan 2009, Alex Betis wrote:
> On Sun, Jan 25, 2009 at 6:29 PM, Hans Werner wrote:
> > > On Sun, Jan 25, 2009 at 4:41 PM, Hans Werner wrote:
> > > > > If you have a stb0899 device, don't forget to add "-k 3".
> > > > Oh. Can someone say what's different about the stb0899 here,
> > >
Dear Guennadi
> Have you tested with v4l-dvb/v4l2-apps/test/capture_example.c? I think it
> wouldn't work, because it first calls S_CROP, and then S_FMT, and even
> with this your patch you'd fail S_CROP if S_FMT hadn't been called before
> (priv->fmt == NULL). Am I right?
hmm.. I would like
On Sun, Jan 25, 2009 at 5:32 PM, CityK wrote:
> I haven't taken the opportunity to ever use Kaffeine for scanning OTA
> just yet, however, I do note that it produces similar results for me, as
> to what you observed, when I scan on digital cable using QAM256. In my
> case, it repeatedly borks at 6
Je serai absent(e) du 24/01/2009 au 02/02/2009.
I'm on vacation until the 2nd of February.
For any technical questions, you can contact Thierry Marchand at this
address : thierry.march...@sagem.com
Best regards,
Benoit Raque
" Ce courriel et les documents qui y sont attaches peuvent conteni
On Sun, 2009-01-25 at 17:42 -0500, CityK wrote:
> Andy Walls wrote:
> > blah blah blah
>
> ^ What Andy wrote ... I had not seen his reply until after sending my
> own, which evidently largely contains pretty much the same set of
> answers as the former.
A few others that it sounds like A. may ha
Am Sonntag, den 25.01.2009, 18:35 -0500 schrieb CityK:
> hermann pitton wrote:
> > Am Sonntag, den 25.01.2009, 13:49 -0800 schrieb Trent Piepho:
> >
> >> On Sun, 25 Jan 2009, CityK wrote:
> >>
> >>> Hans Verkuil wrote:
> >>>
> >>> this still begs Han's question: "how do you manage to make
I also run it with "-5".
I personaly don't like to use network advertisements (-n switch) since I
don't trust them.
I use a full frequency filled INI file.
Hi
It might be that the signal is not the best possible for me as I can only
scan about 500 channels with scan by using a command:
./scan
hermann pitton wrote:
> Am Sonntag, den 25.01.2009, 13:49 -0800 schrieb Trent Piepho:
>
>> On Sun, 25 Jan 2009, CityK wrote:
>>
>>> Hans Verkuil wrote:
>>>
>>> this still begs Han's question: "how do you manage to make analog TV
>>> work if the tda9887 isn't found? That's rather peculiar."
Hi Mauro,
Please pull from http://linuxtv.org/hg/~dougsland/radios for the
following:
- radio-mr800: fix radio->muted and radio->stereo
- v4l/dvb: use usb_make_path in usb-radio drivers
Cheers,
Douglas
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body
From: Kay Sievers
Subject: v4l: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: mche...@infradead.org
Cc: linux-media@vger.kernel.org
Acked-by: Greg Kroah-Hartman
Signed-off-by: Kay Sievers
---
drivers/media/radio/radio-tea5764.c |3 ++-
drivers/media/video/v4l2-device.c
Am Sonntag, den 25.01.2009, 13:49 -0800 schrieb Trent Piepho:
> On Sun, 25 Jan 2009, CityK wrote:
> > Hans Verkuil wrote:
> > > card. Does someone know if there is something special about this? And how
> > > do you manage to make analog TV work if the tda9887 isn't found? That's
> > > rather pecul
Andy Walls wrote:
> blah blah blah
^ What Andy wrote ... I had not seen his reply until after sending my
own, which evidently largely contains pretty much the same set of
answers as the former.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to m
A. F. Cano wrote:
> Yes. The RF input is hooked up to an 11ft Winegard roof antenna, mounted on
> a stand behind me, properly oriented according to antennaweb.com for the
> local stations, and with a UHF pre-amp for good measure. It is inside, but
> a foot below the reasonably high ceiling, so it
Hi Alexey,
Applied, thanks.
Cheers,
Douglas
On Sun, 25 Jan 2009 06:36:33 +0300
Alexey Klimov wrote:
> Hello all
> I'm not sure is this patch really suitable.
> But looks that main development mail-list moved to linux-media..
>
> ---
> Correct mailing list in 3 places in em28xx-cards.c
> Mov
Hi Mauro,
I've added new 4 patches.
On Mon, 19 Jan 2009 10:37:22 -0200
"Douglas Schilling Landgraf" wrote:
> Hello Mauro,
>
> Please pull from http://linuxtv.org/hg/~dougsland/em28xx/ for the
> following:
>
> - em28xx: Add entry for GADMEI TVR200
> Thanks to Yohanes Nugroho for tes
On Sun, 2009-01-25 at 16:46 -0500, A. F. Cano wrote:
> On Sun, Jan 25, 2009 at 01:45:41PM -0500, CityK wrote:
> > A. F. Cano wrote:
> > > Still trying to get the OnAir Creator to work. It is properly recognized
> > > by the pvrusb2 driver, but I can't seem to get any further. I'm now
> > > trying
On Sun, 25 Jan 2009, CityK wrote:
> Hans Verkuil wrote:
> > card. Does someone know if there is something special about this? And how
> > do you manage to make analog TV work if the tda9887 isn't found? That's
> > rather peculiar.
The tda9887 is a simple device with just three registers. If they
On Sun, Jan 25, 2009 at 01:45:41PM -0500, CityK wrote:
> A. F. Cano wrote:
> > Still trying to get the OnAir Creator to work. It is properly recognized
> > by the pvrusb2 driver, but I can't seem to get any further. I'm now
> > trying to scan the digital channels.
> >
>
> While you seem to be
On Freitag, 16. Januar 2009, Patrick Boettcher wrote:
I am looking forward to test your patch.
> There a struct-work-watchdog looking at the number of irq-received while
> having PIDs active in the PID-filter. If no IRQs are received, the
> pid-filter-system is reset.
>
Very good idea.
>
> Befor
On Sun, 25 Jan 2009, Hans Verkuil wrote:
> I also would like to see the documentation for these ioctls and controls. I
> hope my www.linuxtv.org/hg/~hverkuil/v4l-dvb-spec tree will be merged soon
> with the master, but in the meantime you can mail a diff against the
> documentation in my tree. I wi
(This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.)
Results of the daily build of v4l-dvb:
date:Sun Jan 25 19:00:04 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 10305:6a6eb9efc6cd
gcc version: gcc
A. F. Cano wrote:
> Still trying to get the OnAir Creator to work. It is properly recognized
> by the pvrusb2 driver, but I can't seem to get any further. I'm now
> trying to scan the digital channels.
>
While you seem to be trying to scan for OTA channels, I would like
confirmation that this
Hi!
can anyone help me?
my CX23418 does not seem to work...
I'm running a 64bit Ubuntu 8.10 on a Toshiba Qosmio Laptop
$ uname -a
Linux flosmio 2.6.27-9-generic #1 SMP Thu Nov 20 22:15:32 UTC 2008
x86_64 GNU/Linux
$ lspci -v
[...]
06:09.0 Multimedia video controller: Conexant Systems, Inc. CX234
CityK wrote:
> Hans wrote:
>> CityK wrote:
>>
>>> In regards to the tuner type being set twice, that is precisely my point
>>> -- its peculiar and not symptomatic of normal behaviour. That is why I
>>> asked whether you expected it to do this
>>>
>> I think it is OK. The second set
> I have run the scan using a TeVii S650. Now I have run then same using
> my SkyStar HD and I got 1467 services.
>
> So there is something not working using the TeVii S650...
have you any duplicates channels in channels list after of scan with tevii ?
could you have a look on debug logs of cx241
On Sun, Jan 25, 2009 at 10:26:51AM -0500, Michael Krufky wrote:
> On Sat, Jan 24, 2009 at 3:37 PM, Jeff DeFouw wrote:
> > On Tue, Jan 20, 2009 at 10:08:51PM -0800, Killero SS wrote:
> >> i'm using ubuntu 8.10 2.6.27-9-generic
> >> and tried compiling latest modules with hg-clone but my analog capt
Hi Alex,
here's a patch for scan-s2.
I found with one card (VP-1041) that I needed to be careful to
turn off the tone before making the DiSEqC 1.2 rotor command.
Kaffeine does this too so guess it is generally necessary. Also
we can rotate faster by selecting the higher LNB voltage (18v).
Regar
> On Sun, Jan 25, 2009 at 4:41 PM, Hans Werner wrote:
>
> > > If you have a stb0899 device, don't forget to add "-k 3".
> >
> > Oh. Can someone say what's different about the stb0899 here,
> > and how -k 3 helps ?
>
>
> Since I've added it, I'll try to defend it :)
>
> stb0899 driver (or maybe
On Sat, Jan 24, 2009 at 3:37 PM, Jeff DeFouw wrote:
> On Tue, Jan 20, 2009 at 10:08:51PM -0800, Killero SS wrote:
>> i'm using ubuntu 8.10 2.6.27-9-generic
>> and tried compiling latest modules with hg-clone but my analog capture got
>> broken, firmware error...
>> so i got back to original kerne
> If you have a stb0899 device, don't forget to add "-k 3".
Oh. Can someone say what's different about the stb0899 here,
and how -k 3 helps ?
Thanks,
Hans
--
Release early, release often.
Pt! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen:
http://www.gmx.net/de/go/multim
Hi,
Jens Krehbiel-Gräther schrieb:
> Artem Makhutov schrieb:
>
>> Hello,
>>
>> I am wondering on how to use scan-s2.
>>
>> When running scan-s2 like this I am only getting 13 services:
>>
>> scan-s2 -a 2 -o zap /usr/share/dvb/dvb-s/Astra-19.2E > channels.conf
>>
>> when running
>>
>> scan-s2 -a
On Sat, 24 Jan 2009 15:52:41 -0800 (PST), Trent Piepho wrote:
> Ronald Bultje hasn't been maintaining the zoran driver for some time.
> Re-direct people to the mailing lists and web pages.
>
> Signed-off-by: Trent Piepho
> ---
> I think it's better to keep what info there is here instead of delet
On Sunday 25 January 2009 10:35:49 Hans Verkuil wrote:
> On Saturday 24 January 2009 18:03:51 Shah, Hardik wrote:
> > > -Original Message-
> > > From: Shah, Hardik
> > > Sent: Wednesday, January 21, 2009 5:24 PM
> > > To: video4linux-l...@redhat.com; linux-media@vger.kernel.org
> > > Cc: Sh
On Sunday 25 January 2009, Laurent Pinchart wrote:
> On Sunday 25 January 2009, Hans Verkuil wrote:
> > On Saturday 24 January 2009 18:03:51 Shah, Hardik wrote:
> > > > -Original Message-
> > > > From: Shah, Hardik
> > > > Sent: Wednesday, January 21, 2009 5:24 PM
> > > > To: video4linux-l.
On Sunday 25 January 2009, Hans Verkuil wrote:
> On Saturday 24 January 2009 18:03:51 Shah, Hardik wrote:
> > > -Original Message-
> > > From: Shah, Hardik
> > > Sent: Wednesday, January 21, 2009 5:24 PM
> > > To: video4linux-l...@redhat.com; linux-media@vger.kernel.org
> > > Cc: Shah, Hard
On Saturday 24 January 2009 18:03:51 Shah, Hardik wrote:
> > -Original Message-
> > From: Shah, Hardik
> > Sent: Wednesday, January 21, 2009 5:24 PM
> > To: video4linux-l...@redhat.com; linux-media@vger.kernel.org
> > Cc: Shah, Hardik; Jadav, Brijesh R; Nagalla, Hari; Hadli, Manjunath; R,
>
On Saturday 24 January 2009 17:59:27 Shah, Hardik wrote:
> > -Original Message-
> > From: Shah, Hardik
> > Sent: Thursday, January 22, 2009 10:27 AM
> > To: 'linux-media@vger.kernel.org'; video4linux-l...@redhat.com
> > Subject: [RFC] Adding new ioctl for transparency color keying
> >
> > H
38 matches
Mail list logo
