Hi all, I am new on this list (and new of Gentoo).
I have some doubts on the setting of the flag USE.
I understood its features but I do not know WHEN use them.
Some questions:
1 - Is it mandatory to set the Flag USE?
2 - If not, should I verify which flags to use for each package I want to
instal
Alle 14:14, martedì 21 marzo 2006, Matthias Langer ha scritto:
> On Tue, 2006-03-21 at 13:50 +0100, [EMAIL PROTECTED] wrote:
> > Hi all, I am new on this list (and new of Gentoo).
> > I have some doubts on the setting of the flag USE.
> > I understood its features but I do not know WHEN use them.
>
Hi everybody.
To-day I installed kdebase using "emerge kdebase".
But the installed version was 3.4.3.
Is it right? Did not KDE reach 3.5 version?
emilio
--
gentoo-user@gentoo.org mailing list
Hi all. It's me, again.
I have set my /etc/fstab following the instractions of the Handbook. In the
example there is this entry:
/dev/cdroms/cdrom0 /mnt/cdrom auto noauto,user0 0
To-day I discovered that there is no /cdroms subdirectory in /dev directory.
Is it a bug either of
Hi all
I have the need to configure my USRobotics internal modem (pci card) for
faxing. Running "lspci" the modem is not seen.
Should I load any module or enable any kernel entry (during the installation
of Gentoo I used genkernel)?
Where may I find documentation on this topic?
Bye
emilio
--
Alle 15:39, sabato 25 marzo 2006, JimD ha scritto:
> On Sat, 25 Mar 2006 11:32:26 +
>
> [EMAIL PROTECTED] wrote:
> > Hi all
> > I have the need to configure my USRobotics internal modem (pci card)
> > for faxing. Running "lspci" the modem is not seen.
> > Should I load any module or enable any
Alle 16:24, domenica 26 marzo 2006, JimD ha scritto:
> On Sun, 26 Mar 2006 14:35:42 +
>
> [EMAIL PROTECTED] wrote:
> > Well, using lspci -v
> >
> > 02:07.0 Serial controller: 3Com Corp, Modem Division 56K FaxModem
> > 02:Model 5610
> > (rev 01) (prog-if 02 [16550])
> > Subsystem: 3Com C
Alle 15:05, lunedì 27 marzo 2006, b.n. ha scritto:
> [EMAIL PROTECTED] wrote:
> > Hi all only to-day I found out that KDE has been installed without arts.
> > So I installed it. But the sound system does not work!
> > Shoul I reinstall (recompile) every KDE package?
>
> It is probable that arts was
I am using KDE 3.4.3 Gentoo amd64.
Almost every time I login the icons of the desktop moved and mixed.
I tried checking every possible options (KDE Comtrol Center), with no results.
Any hints.
Is it a bug?
Bye
emilio
--
gentoo-user@gentoo.org mailing list
Alle 19:29, lunedì 27 marzo 2006, JimD ha scritto:
> On Mon, 27 Mar 2006 11:16:11 +
>
> [EMAIL PROTECTED] wrote:
> > Solved!!
> >
> > Thank you
> >
> > emilio
>
> You should post how you solved the problem in case someone else runs
> into the same issue. This way they can search Gentoo/Google
Alle 23:04, lunedì 27 marzo 2006, Sergio Polini ha scritto:
> [EMAIL PROTECTED]:
> > I am using KDE 3.4.3 Gentoo amd64.
> > Almost every time I login the icons of the desktop moved and mixed.
> > I tried checking every possible options (KDE Comtrol Center), with
> > no results. Any hints.
>
> Try c
As I said yeasterday during the emerge of KDE I did not install arts.
So I installed arts then re-emerging the already installed KDE packages.
(argh, argh and argh).
But the sistem bell does not ring yet..
Another bug?
Ciao
emilio
--
gentoo-user@gentoo.org mailing list
Alle 15:00, martedì 28 marzo 2006, Ralph Slooten ha scritto:
> Maybe I misunderstand you, but here goes:
>
> The system bell is a kernel module in the > 2.6 kernels ~ this is if you
> are meaning the actual system bell. If you are referring to a beep in
> the KDE konsole, then that is a separate se
Hi everybody.
I think gentoo is driving me crazy.
Since I found out the I can listen .wav file but not .ogg file, to-day I
installed libvorbis, mpeg123 and vorbis-tools.
But the result is the same . . . I cannot listen .ogg file.
Bye
emilio
--
gentoo-user@gentoo.org mailing list
USE flags doubts (again).
If I run this command:
emerge -pv hplip
the output is:
[ebuild R ] net-print/hplip-0.9.7-r3 +X +cups +foomaticdb -ppds +qt
+scanner* -snmp +usb 0 kB
There are 5 flags prefixed by a plus and red coloured (+X, +cups, +foomaticdb,
+qt and +usb). These flags are alr
Hi all,
after emerging and emerging . . .
and an enrge --newuse world
the system bell keeps on not working.
With System bell I mean:
KDE Control Center -> Sound & Miltimedia -> System bell
I controlled the volume levels on kmix and aumix.
I do not know which other attempt to try.
Bye
emilio
--
Hi all
to-day I re-compiled the kernel to enable PCSPKR and USB printer.
1 - the system bell works but as root only. Likely a matter of permissions,
but I do not know where to look for;
2 - the printer is correctly detected, but when I try to set it up using cups
I see no printer modules. The fo
Alle 16:55, domenica 2 aprile 2006, david ha scritto:
> What brand and model # is your printer?
HP PSC 1410
--
gentoo-user@gentoo.org mailing list
cut
>
> I thought you had to have ppds use flage in /etc/make.conf in order for
> the ppd files to be generated (compiled?) No?
That was the question! Should I?
And after?
Bye
emilio
--
gentoo-user@gentoo.org mailing list
Alle 17:54, domenica 2 aprile 2006, Jim ha scritto:
> On Sun, 2006-04-02 at 17:17 +0200, [EMAIL PROTECTED] wrote:
> > Alle 16:55, domenica 2 aprile 2006, david ha scritto:
> > > What brand and model # is your printer?
> >
> > HP PSC 1410
>
> Then emerge hplip and they you need to start hplip and cu
Hi all, I recompiled my kernel and now the system bell plays . . . but as root
only.
I tried to add myself as normal users to the following groups:
root, sys, adm, tty, console
with no results.
Any other hints?
Thank you
emilio
--
gentoo-user@gentoo.org mailing list
Alle 16:26, venerdì 7 aprile 2006, Richard Fish ha scritto:
> On 4/7/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > Hi all, I recompiled my kernel and now the system bell plays . . . but as
> > root only.
> > I tried to add myself as normal users to the following groups:
> > root, sys, adm, t
Alle 17:29, venerdì 7 aprile 2006, [EMAIL PROTECTED] ha scritto:
> Alle 16:26, venerdì 7 aprile 2006, Richard Fish ha scritto:
> > On 4/7/06, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote:
> > > Hi all, I recompiled my kernel and now the system bell plays . . . but
> > > as root only.
> > > I tried t
Alle 06:12, sabato 8 aprile 2006, Anthony E. Caudel ha scritto:
> I wonder why I do not have a ~/.kde/share/config/kaccessrc file?
Did you install kdeaccessibility?
Or
How many users on your box?
>
> Tony
Emilio
--
gentoo-user@gentoo.org mailing list
Hi all,
I do not remember anymore which program to emerge for enabling mouse on a
console.
emilio
--
gentoo-user@gentoo.org mailing list
25 matches
Mail list logo
