I have fetched sunday morning src file for wxGTK-2.6.1 and compile it
and everytime i got this error:
##
/usr/lib/gcc/i686-pc-linux-gnu/3.4.4/../../../crt1.o: In function `_start':
init.c:(.text+0x18): undefined reference to `main'
coll
ask
I have tried line as below but then portage losed distfiles dir at all
#DISTDIR="/usr/portage/distfiles /usr/local/portage/distfiles"
Thanks for any help
Greets
Paweł Madej
--
gentoo-user@gentoo.org mailing list
up
(as an additional).
Greets
Paweł Madej
--
gentoo-user@gentoo.org mailing list
Neil Bothwick wrote:
On Wed, 04 Jan 2006 09:00:30 +0100, Paweł Madej wrote:
You also need to make $DISTDIR group writable.
$ ls -l /usr/portage/ | grep distfiles
drwxrwxr-x4 root portage 36864 sty 4 08:56 distfiles
$ cat /etc/group | grep nysander
wheel:x:10:root,nysander
floppy:x
6.1_rc1.ebuild digest
!!! No write access to write to /usr/portage/distfiles. Aborting.
/.locks
Full path does not help :(
- --
Paweł Madej aka Nysander
http://quanteam.info | http://forum-farmaceutyczne.org
http://nysander.quanteam.info | http://wiki.quanteam.info
GPG key: 5861680B
ac. That resolved a problem. I think if I should
file a bug about this?
- --
Paweł Madej aka Nysander
http://quanteam.info | http://forum-farmaceutyczne.org
http://nysander.quanteam.info | http://wiki.quanteam.info
GPG key: 5861680B | keyserver: http://pgp.mit.edu
-BEGIN PGP
s
> not ensure that .locks continues to have the correct gid.
>
> Zac
Bug filed: http://bugs.gentoo.org/show_bug.cgi?id=117781
If you got any more information that you think we should add just
comment above bug.
- --
Paweł Madej aka Nysander
http://quanteam.info | http://forum-
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Peter Ruskin wrote:
> On Wednesday 04 January 2006 18:18, Paweł Madej wrote:
>
>
>
> $ ls -ld /usr/portage/distfiles
> drwxrwsr-x 4 portage portage 131072 2006-01-04
> 00:51 /usr/portage/distfiles
>
> What does yours
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
I think you should file a bug on http://bugs.gentoo.org so dev's and
tester team could check if its your broken tree or a bigger problem with
dbus. also check if someone haven't filed similar one before.
- --
Paweł Madej aka Nys
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Did you try to run ldconfig so libraries cache was rebuild?
- --
Paweł Madej aka Nysander
http://quanteam.info | http://forum-farmaceutyczne.org
http://nysander.quanteam.info | http://wiki.quanteam.info
GPG key: 5861680B
o.org so the problem
could be seen by kernel developers
- --
Paweł Madej aka Nysander
http://quanteam.info | http://forum-farmaceutyczne.org
http://nysander.quanteam.info | http://wiki.quanteam.info
GPG key: 5861680B | keyserver: http://pgp.mit.edu
key fingerprint: 34A9 B8BB DFA2 4F
n.
http://www.howtoforge.com/virtual_postfix_mysql_quota_courier
- --
Paweł Madej aka Nysander
Member of QuanTeam | RLU #357047
http://wiki.quanteam.info | Gentoo Linux User
http://forum-farmaceutyczne.org | GPG key: 5861680B
| keyserver: http://pgp.mit.edu
Kielce, Poland
for modular X deps
DEPEND="${DEPEND} vim-with-x? ( || (
( x11-libs/libXt x11-libs/libX11 x11-libs/libSM
x11-proto/xproto )
virtual/x11 ) )"
RDEPEND="${RDEPEND} vim-with-x? ( || ( x11-libs/libXt
virtual/x11 ) )"
for me i
Hello,
I got emerged suspend2 kernel sources and compiled with such options:
[*] Power Management support
[ ] Power Management Debug
Support
[ ] Software
Suspend
I try to resolve such a problem:
I can halt my computer only if i login to root console and do # halt
User on which i work is in wheel group but i cannot do halt from it
How to make it possible to halt from wheel group user?
And the same thing on # hibernate
Thanks for any help
Paul
--
gento
I've done so but system behaviour did not changed. Any other suggestions?
Greets
Paul
Harald Arnesen wrote:
poweroff
# PowerdownMethod 5
Try uncommenting this line.
--
gentoo-user@gentoo.org mailing list
Ow Mun Heng wrote:
This reportedly worked for some other user
Try this patch -
http://dagobah.ucc.asn.au/patches-2.6.13/suspend2-2.2-rc6-poweroff-fix.diff>
I've done emerge sync and installed suspend2-sources-2.6.13-r4 and
things went horribly wrong
Suspend2 fails everytime to suspend and
Hello,
i'm going to setup server machine on Gentoo Linux and my question is if
it is possible to mask portage categories which i won't to update such
as whole X apps games desktop utils and so on ... which I'll never
install and use on this server.
This will make faster syncing and rebuildin
When i start aterm i got below error on my console:
$ aterm
aterm has encountered a problem interacting with X Windows :
Request: 2,Error: 3(BadWindow (invalid Window parameter))
in resource: 0x0
Other weird behaviour is that Midnight Commander on aterm won't respect
F1 - F4 keys
I've done glsa-check -t new and i got that my python is vulnerable
i got in world only dev-lang/python-2.4.1-r1 but it says that vulnerable
is <2.3.5-r2 so i've searched for any vulnerable version on my system
and i've found python-2.3.5
My question is: Could I unmerge 2.3.5 version which is
Oscar wrote:
I'm not sure about the games, but avoiding installing X is quite simple!
This is what I use on my gentoo server:
USE="-gpm ipv6 imap gd gd-external jpeg png -svga -X -gnome -kde -qt -gtk -gtk2 xml
xml2 apache2 tiff mysql offensive -samba"
I think there is a way to choose what cate
Konst wrote:
On Mon, Sep 19, 2005 at 10:54:54AM +0200, Paweł Madej wrote:
http://gentoo-wiki.com/TIP_Exclude_categories_from_emerge_sync
Thank you Konst & Mike for fast answer.
That is what I was looking for
Greets
Paul
--
gentoo-user@gentoo.org mailing list
Mauro Faccenda wrote:
Hi all,
Does anyone can recommend a well-supported inkjet printer for using with
Linux?
Thanks in advance,
Mauro
I recommend http://linuxprinting.org site for looking at. There are many
printers described with support for them. As you got many drivers such
as hpjs c
John Jolet wrote:
On Thursday 22 September 2005 07:51, Dave Nebinger wrote:
I'd add here, though, that almost no lexmark inkjets are supported.
I would not agree with it. Try install gimp-print with +ppd use flag
there are some of them supported. The only problem with my Lexmark Z53
which I
Hello,
I got problem with my FreeBSD box.
I installed cups cups-base and other stuff for it and when i try to add
printer via webinterface it don't see any device (like parallel, usb,
http and so on).
Anybody got idea what could cause it? And how to resolve that problem?
Thanks for any help
Nick Rout wrote:
http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/
What is the result of running:
lpinfo -v
/usr/lib/cups/backend/usb
(and the other scripts in the same directory, of course the directory
could be elsewhere under freebsd)
lpinfo -v shows nothing
and directo
Hi,
Maybe this will help
after upgrading udev / kernel sources i've found in dmesg that my camera
(olympus) which uses mass storage protocol was found as a /dev/uba1 so
maybe your USB stick will also be as such device.
if not paste your dmesg messages what it says while plugging into USB
st
Cyrille Damez wrote:
Le Friday 23 September 2005 15:57, Paweł Madej a écrit :
Most likely, it would be there too, but as far as I understand those /dev/ub*
devices use the generic usb block device driver, which is very slow. For a
memory stick or a hard-drive, it is much better to use /dev
Neil Bothwick wrote:
On Fri, 23 Sep 2005 18:39:29 +0200, Pawe__ Madej wrote:
Turn off Device Drivers -> Block Devices -> Low Performance USB Block
driver in your kernel config.
I've done this and i got /dev/sda now and as you said it is much faster
than /dev/uba.
Thank's a lot Neil
Gree
Hello,
I've installed and configured automounter and it works ok for my cdrom
and floppy drive.
I'll describe my situation: My laptop has only one usb port and normally
I have plugged to it my mouse. When I want to copy photos from my
digital camera I have to unplug mouse and plug usb cable
Hello,
I want to know for what reason there is sth like updating portage cache
after rsync in emerge sync.
It's very very slow and I dont know why. So my question is could I some
way turn off this cache?
Greets
Paweł
--
gentoo-user@gentoo.org mailing list
Allan Spagnol Comar wrote:
This cache is used to resolve all packages you want to update,install
or remove from your box; if you turn off this cache you would need to
do the same action to every emerge option; I believe that is better to
let it do just when updating portage tree :)
Holpe it
Dunc wrote:
For something you should only do once a day, 10 minutes isn't that bad
though.
I sync not day by day but 2-3 times a week but when I sync I want to run
just after it emerge of updates (I follow new ebuilds on [1] site and
run emerge if sth interesting for me appears there).
My
I forgot link [1] is
http://packages.gentoo.org/archs/x86/testing/gentoo_simple.rss
Greets
Paweł
--
gentoo-user@gentoo.org mailing list
Ryan Viljoen wrote:
If you do a:
du -hs /usr/portage/distfiles
and a
du -hs /usr/portage
You will see that the majority of the space is taken up by the
distfiles. This is where emerge stores all the packages that it
downloads when installing them on your system. To decrease the size of
the di
Dave Nebinger wrote:
I've had a lot of luck with the cdb patch for portage. It's mentioned in
the gentoo wiki. I haven't measured to see how syncs are impacted but
regular portage stuff seems faster.
That's what I was looking for ... great speedup.
Thx Dave
Greets
Paweł
--
gentoo-user@ge
Patrick Marquetecken wrote:
Hi,
Whats the best way to keep several /etc/host files in sync ?
TIA
Patrick
I got that problem few days ago and tried to install MyDNS [1] little
dns server great for home network. It also has easy admin script written
in PHP but it is not installed during emer
Erwin Lang wrote:
hi everybody!
I don't like to upgrade to ruby version 1.8.3 so i added the following line(s)
(not all at the same time) to /etc/portage/package.keywords:
=dev-lang/ruby-1.8.2
=dev-lang/ruby-1.8.2-r2
=dev-lang/ruby-1.8.2-r2 x86
but none of these entries kept `emerge -uva w
hello,
I want to run irc server with services but i cant find any tutorial how
to do it. More complicated for me is what software to choose because
some services dont work with all ircd's and on other hand there is no
package like in debian for ex. dancer-ircd / dancer-services.
I ask for so
Allan Spagnol Comar wrote:
Thanks all for the answers until now;
What i am looking for is to backup 3 servers, and a critical issue workstation.
I think that you should test Bacula. that is very scalable app to backup
from different sources to different media.
http://www.bacula.org
Greets
P
Hello,
I got a question if there is possibility to force some packages to use
other LDFLAGS that are set globally in /etc/make.conf
My global LDFLAGS are "-z combreloc -s" and there is only one package
which crashes with them. It is wine. It recognizes word combreloc in
that flag as a filena
Hello,
I got some problem how to set flags such as threads, itreads,
linuxthreads-tls.
My glibc has locally set flags: nptl nptlonly userlocales
I got also set my apache - mpm-worker flag.
My question is if threads flag should be set globally and -threads
locally for an apache2 ebuild? or se
Hello,
As i have read [1] documentation portage should provide g-cpan.pl tool
but on my system there is no such script. Any ideas how to install cpan
perl modules via portage?
I know that I can do it via cpan tool but manual [1] suggests using
g-cpan.pl tool which i dont have
[1] http://ww
Paul Varner wrote:
On Tue, 2005-12-27 at 17:19 +0100, Paweł Madej wrote:
emerge app-portage/g-cpan
Regards,
Paul
Thank you Paul and Rumen :)
--
gentoo-user@gentoo.org mailing list
44 matches
Mail list logo
