On Thursday, December 20, 2018 9:12:43 AM CET Dale wrote:
> J. Roeleveld wrote:
> > On December 20, 2018 4:41:26 AM UTC, Dale wrote:
> > Howdy,
> >
> > I just installed a new video card. After a couple weeks of USPS
> > dragging it around, it f
On December 20, 2018 11:45:29 AM UTC, Dale wrote:
>Peter Humphrey wrote:
>> On Thursday, 20 December 2018 08:12:43 GMT Dale wrote:
>>
>>> Thanks for the help. When I boot next time, maybe it will log the
>error
>>> and I can see what is going on.
>> You could also try CTRL-S to pause the screen
On December 21, 2018 12:27:28 AM UTC, Dale wrote:
>Dale wrote:
>> J. Roeleveld wrote:
>>> On December 20, 2018 11:45:29 AM UTC, Dale
>wrote:
>>>
>>> Peter Humphrey wrote:
>>>
>>>
>>>
>>> Next upgrade idea:
>&g
On December 21, 2018 12:21:35 AM UTC, Dale wrote:
>Neil Bothwick wrote:
>> On Thu, 20 Dec 2018 15:13:37 -0600, Dale wrote:
>>
>>> I don't think it would help. It's the speed that is the problem. It
>was
>>> almost impossible to read anything with my old CPU. It's nothing but
>a
>>> blur with this
On December 21, 2018 8:42:17 AM UTC, "Stefan G. Weichinger"
wrote:
>Am 21.12.18 um 08:53 schrieb Stefan G. Weichinger:
>
>> We now have a non-booting gentoo (going into systemd emergency mode)
>...
>> something around LVM fails and so it stops booting.
>Is it possible that related to the rebuilds
On December 30, 2018 9:30:00 AM UTC, Peter Humphrey
wrote:
>Hello list,
>
>I've been trying to boot this CD without NetworkManager starting. The
>docs say
>to specify "nonm" on the boot command line, but it has no effect. Has
>anyone
>else found this?
>
>They don't tell us where to report bugs,
On December 31, 2018 6:29:16 PM UTC, Peter Humphrey
wrote:
>On Monday, 31 December 2018 16:00:34 GMT Mick wrote:
>> On Monday, 31 December 2018 15:40:48 GMT Peter Humphrey wrote:
>> > On Monday, 31 December 2018 13:19:49 GMT Mick wrote:
>> > > On Monday, 31 December 2018 10:26:06 GMT Peter Humphr
On Thursday, January 10, 2019 1:55:59 AM CET Dale wrote:
> Wols Lists wrote:
> > On 07/01/19 10:46, Dale wrote:
> >> From what I've read, that can be overcome. If you get say a SMART
> >> message that a drive is failing,
> >
> > Yup, I have to agree that SMART isn't always reliable, but if you
>
On January 12, 2019 8:02:48 AM UTC, Andrew Udvare wrote:
>
>
>Sent from my iPhone
>
>> On Jan 12, 2019, at 02:12, Dale wrote:
>> Just for giggles, I used VLC for a bit to play a video. It has a
>fair
>> resolution and is a .mp4. It uses about the same amount of CPU power
>as
>> Smplayer. I can'
On Thursday, January 17, 2019 10:37:32 PM CET Alarig Le Lay wrote:
> Hi,
>
> I would like to set the alias of my interfaces at boot (if possible with
> netifrc).
>
> Here are the relevant parts of my configuration:
> config_enp3s0f0="null"
> vlans_enp3s0f0="20 21 22 50"
> config_enp3s0f0_22="185.
On Saturday, January 19, 2019 3:36:15 PM CET Alarig Le Lay wrote:
> Hi,
>
> On sam. 19 janv. 12:02:20 2019, J. Roeleveld wrote:
> > Not sure if you can use spaces in the name, but I have the following:
> >
> > $ cat /etc/conf.d/net
> > #config_eno1=
On Sunday, January 20, 2019 1:29:48 AM CET Alarig Le Lay wrote:
> On sam. 19 janv. 16:45:42 2019, J. Roeleveld wrote:
> > Not sure if that is actually "supported" by netifrc.
> > You could add these commands in a postup() block.
>
> I did that, thanks!
>
> &
On January 24, 2019 11:23:34 AM UTC, Mick wrote:
>On Thursday, 24 January 2019 11:19:16 GMT John Covici wrote:
>> On Thu, 24 Jan 2019 06:07:57 -0500,
>>
>> Mick wrote:
>> > [1 ]
>> >
>> > On Thursday, 24 January 2019 04:28:06 GMT Davyd McColl wrote:
>> > > On January 24, 2019 6:25:48 AM Alan Gr
On Friday, January 25, 2019 8:40:32 PM CET Canek Peláez Valdés wrote:
> On Fri, Jan 25, 2019 at 1:17 PM Nikos Chantziaras wrote:
> > On 25/01/2019 20:48, Grant Edwards wrote:
> > > But, flatpak isn't in the standard portage tree, so you have to use an
> > > overlay or local repo.
> > >
> > > This
On Saturday, January 26, 2019 8:58:13 PM CET Alec Ten Harmsel wrote:
> On Fri, Jan 25, 2019 at 01:02:39PM -0600, Canek Peláez Valdés wrote:
> > On Fri, Jan 25, 2019 at 12:48 PM Grant Edwards
> >
> > wrote:
> > > I'm shopping for an IMAP email client that does a decent job of
> > > handling HTML.
On February 16, 2019 5:15:48 AM UTC, Andrew Savchenko
wrote:
>Hi!
>
>On Tue, 12 Feb 2019 18:59:06 +0100 tu...@posteo.de wrote:
>> Hi,
>>
>> I got my hands on one of the well known NOKIA 3310 (2001...not the
>new NOKIA 3310
>> ones) phones. It seems the previous seller has branded the phone with
On March 10, 2019 1:24:14 PM UTC, Dan Johansson wrote:
>After updating a server from kernel-4.14.83 to 4.19.27-r1 (same problem
>
>with 4.19.23) the server will not boot.
>
>Grub starts fine and I can select the new kernel.
>The kernel starts booting and after mounting "/" and "/usr" (this is a
>
On Monday, March 11, 2019 9:31:58 PM CET Dan Johansson wrote:
> On 11.03.19 20:55, J. Roeleveld wrote:
> > On March 10, 2019 1:24:14 PM UTC, Dan Johansson
> > wrote:
> >> After updating a server from kernel-4.14.83 to 4.19.27-r1 (same problem
> >>
> >&
On March 17, 2019 5:04:13 PM UTC, Dan Johansson wrote:
>On 12.03.19 12:16, J. Roeleveld wrote:
>> On Monday, March 11, 2019 9:31:58 PM CET Dan Johansson wrote:
>>> On 11.03.19 20:55, J. Roeleveld wrote:
>>>> On March 10, 2019 1:24:14 PM UTC, Dan Johansson
> wro
On April 5, 2019 7:49:57 AM UTC, Erwan RIGOLLOT wrote:
>Hi all,
>
>I have a VPS with Gentoo at Tilaa. (tilaa.com)
>
>Lasts days, I have try to make a new kernel (for update all my system)
>and after that I can't boot anymore !
>
>I have this message : Kernel panic - not syncing - Attempted to kill
On April 6, 2019 2:02:27 AM UTC, Walter Dnes wrote:
>On Fri, Apr 05, 2019 at 11:41:33PM +0100, Mick wrote
>> On Friday, 5 April 2019 00:18:07 BST Walter Dnes wrote:
>> > I updated kernel a couple of weeks ago, and had to reboot. I'm
>not
>> > seeing any logging output on tty12. "tail /var/l
On April 8, 2019 1:14:38 PM UTC, Peter Humphrey wrote:
>Hello list,
>
>Is anyone else having trouble emerging systemd-boot-241? This machine
>has a
>small rescue system as an alternative boot, and I get a mysterious
>error when
>I emerge the package. The end of the log shows this:
>
>[248/248] x
On Monday, April 8, 2019 4:44:58 PM CEST Peter Humphrey wrote:
> On Monday, 8 April 2019 15:29:47 BST J. Roeleveld wrote:
> > On April 8, 2019 1:14:38 PM UTC, Peter Humphrey
>
> wrote:
> > >Hello list,
> > >
> > >Is anyone else having trouble emerging
On Tuesday, April 9, 2019 11:11:42 AM CEST Peter Humphrey wrote:
> On Tuesday, 9 April 2019 06:56:02 BST J. Roeleveld wrote:
> > if you search for "stat" in the build-log and/or makefile(s), does it show
> > which file(s) it is checking?
>
> Looking into the wo
On Monday, April 15, 2019 4:40:44 PM CEST allan gottlieb wrote:
> On one of my machines I see
>
> gottlieb@E6430 ~ $ eselect binutils list
> [1] x86_64-pc-linux-gnu-2.28.1 *
> [2] x86_64-pc-linux-gnu-2.29.1
> [3] x86_64-pc-linux-gnu-2.30
> [4] x86_64-pc-linux-gnu-2.31.1
>
> But I also see
>
On June 4, 2019 1:10:13 PM UTC, Mick wrote:
>I just downloaded my preferred medium of choice for installing Gentoo
>and
>discovered sysrescuecd now runs Linux Arch instead of Gentoo and to
>make
>things worse it is running systemd instead of openrc. :-(
>
>A quick look in the forums did not rev
On June 4, 2019 5:59:49 PM UTC, Neil Bothwick wrote:
>On Tue, 4 Jun 2019 16:38:14 +0300, Nikos Chantziaras wrote:
>
>> > Regardless, have you used the Arch based sysrescuecd to install
>> > Gentoo and are there are any gotchas I should be aware of?
>>
>> You can use anything. I did use the Gent
On June 6, 2019 5:43:07 PM UTC, Jack wrote:
>On 6/6/19 1:37 PM, Grant Taylor wrote:
>> On 6/6/19 10:50 AM, Jack wrote:
>>
>>> I'm not going to even try regenworld, as I'm in the midst of
>>> converting to the 17.1 profile, and have quite a number of packages
>>> that don't yet seem to cope with
On June 13, 2019 11:48:04 AM UTC, Alexey Eschenko wrote:
>That was my first move. Unfortunately it didn't help.
>
>But in the first answer in this thread I saw a good idea about
>decreasing number of parallel build threads.
>
>I have MAKEOPTS="-j32" and it's probably the cause of my problem with
>
On June 15, 2019 1:04:16 PM UTC, Peter Humphrey wrote:
>Hello list,
>
>The main system on this box is ~amd64 plasma, but I also have a small
>rescue
>system which is amd64, no desktop. I use bootctl from systemd-boot to
>manage
>the UEFI images.
>
>My question is: how much of the bootctl-install
On June 16, 2019 8:03:41 AM UTC, Andrew Udvare wrote:
>I get this error in my boot log:
>
>Jun 16 03:54:55 limelight kernel: cx25840 2-0044: Direct firmware load
>for v4l-cx23885-avcore-01.fw failed with error -2
>Jun 16 03:54:55 limelight kernel: cx25840 2-0044: unable to open
>firmware v4l-cx238
For UEFI systems, I always enable the EFI framebuffer in the kernel config.
(This is needed to see the kernel output and text consoles)
The AGP/DRM options are only needed for X windows (xorg and co)
--
Joost
On 10 August 2019 18:18:27 CEST, Peter Humphrey wrote:
>Hello list,
>
>I have a small
Stefan,
On maandag 29 juli 2019 21:28:50 CEST Stefan G. Weichinger wrote:
> At a customer I have to check through an older gentoo server.
>
> The former admin is not available anymore and among other things I have
> to check how the SAN storage is attached.
If you ever encounter that admin, mak
On woensdag 14 augustus 2019 10:14:31 CEST Stefan G. Weichinger wrote:
> Am 14.08.19 um 08:36 schrieb J. Roeleveld:
> > Stefan,
> >
> > On maandag 29 juli 2019 21:28:50 CEST Stefan G. Weichinger wrote:
> >> At a customer I have to check through an older gentoo serve
On woensdag 14 augustus 2019 14:17:23 CEST Stefan G. Weichinger wrote:
> Am 14.08.19 um 13:20 schrieb J. Roeleveld:
> > See next item, make sure you do NOT mount both at the same time.
>
> I understand and agree ;-)
good :)
> >> # /usr/bin/sg_vpd --page=di /d
Sounds like error message is not clear. But as there is no disc, the mount
action should fail anyway.
What happens when there is a disc in the drive?
--
Joost
On 16 August 2019 16:23:36 CEST, Helmut Jarausch wrote:
>Hi,
>
>I have a very strange effect on my Gentoo system.
>First, I've check tha
On 18 August 2019 10:01:18 CEST, Peter Humphrey wrote:
>On to the next problem...
>
>This workstation serves as compute host to two smaller boxes on the
>network. I
>NFS-mount the PORTDIR of the smaller box in a chroot on this one, then
>do
>emerging and so on to build packages which I install l
On 19 August 2019 22:11:04 CEST, n952162 wrote:
>My eth0/enp2s0 network adapter is configured so:
>
>$ cat /etc/conf.d/net
>
>config_enp2s0="192.168.179.20/24"
>
>but on boot, I get a bonjour address:
>
>enp2s0 Link encap:Ethernet HWaddr 48:BA:4E:29:99:9E
> inet addr:
On 24 August 2019 21:47:16 CEST, the...@sys-concept.com wrote:
>My old router Asus RT-N16 was running DD-WRT and OpenVPN passthrough
>was
>running perfectly. But the router went down.
>
>I just got a new one D-Link DIR-878 but it seem to me it does not
>support OpenVPN passthrough.
>I can not esta
On 23 September 2019 07:33:44 CEST, Adam Carter wrote:
>Follow on question; what does efibootmgr actually modify? Is it writing
>to
>motherboard EEPROM values similar what happens when you write changes
>in
>the BIOS setup pages?
>If you, does mean I may have been able to fix this issue in the BIO
On 16 October 2019 09:33:29 CEST, Neil Bothwick wrote:
>On Tue, 15 Oct 2019 19:41:14 -0400, John Covici wrote:
>
>> Thanks much. Now, what about depclean deleting packages where I have
>> the name in my world file, but no version numbers or anything, it
>> seems to want to delete what it maybe th
On 31 October 2019 16:52:36 CET, Dale wrote:
>Howdy,
>
>I been getting quite a few of these lately.
>
>
>> Some messages to you could not be delivered. If you're seeing this
>> message it means things are back to normal, and it's merely for your
>> information.
>>
>> Here is the list of the bounc
Hi All,
Xorg-server wants to rebuild because the glamor USE flag seems to have
disappeared completely.
For some reason it now fails to build because of missing glamor libraries.
Does anyone else have this issue? Or is my tree not syncing correctly?
Many thanks,
Joost
--
Sent from my Android d
On 8 November 2019 17:01:51 CET, Mick wrote:
>On Friday, 8 November 2019 15:45:38 GMT J. Roeleveld wrote:
>> Hi All,
>>
>> Xorg-server wants to rebuild because the glamor USE flag seems to
>have
>> disappeared completely. For some reason it now fails to build
On 8 November 2019 17:31:34 CET, Dale wrote:
>J. Roeleveld wrote:
>> On 8 November 2019 17:01:51 CET, Mick
>wrote:
>>> On Friday, 8 November 2019 15:45:38 GMT J. Roeleveld wrote:
>>>> Hi All,
>>>>
>>>> Xorg-server wants to rebuild becau
On Thursday, November 7, 2019 4:06:10 PM CET Daniel Frey wrote:
> On 2019-11-07 04:37, Bill Kenworthy wrote:
> > I have run into some problems creating openrc initscripts for moosefs -
> > is there something that will display the start order/dependency tree?
> > Text or graphical doesn't matter.
>
On Thursday, November 7, 2019 1:37:21 PM CET Bill Kenworthy wrote:
> I have run into some problems creating openrc initscripts for moosefs -
> is there something that will display the start order/dependency tree?
> Text or graphical doesn't matter.
>
> Bill K.
The closest to this is:
/lib/rc/bi
On 9 November 2019 11:42:38 CET, Neil Bothwick wrote:
>On Fri, 08 Nov 2019 21:03:13 +0100, J. Roeleveld wrote:
>
>> I had a similar issue and ended up checking every init-script, conf.d
>> file and rc.conf entry and making a dependency-tree manually on a big
>> white-board
On Wednesday, 11 December 2019 06:31:04 CET Andrew Udvare wrote:
> I have been getting relatively consistent kernel panics on some call to
> find_css_set and sometimes a stack trace that mentions cgroups.
Can you provide the full kernel panic (a picture taken with phone or camera
attached to an e
Top posting? You?
On 13 December 2019 08:36:08 CET, Dale wrote:
>Howdy,
>
>I don't recall seeing the thread on the forums but it sort of sounds a
>lot like what I was reading on -dev as to why it is not. Basically, it
>would be a complex and difficult piece of code. According to some, it
>cou
On 15 December 2019 11:02:16 CET, Peter Humphrey wrote:
>Hello list,
>
>Would someone remind me, please, of the git command I need to issue to
>change
>its upstream sync source? I'm debugging a local repo and I'd prefer not
>to
>keep removing the whole tree just to sync it again from a different
What happens when you remove the IPv6 adresses from the NFS config? As you are
using IPv4, those should not be needed.
I haven't had time to enable IPv6 yet, so can't check locally what works and
what doesn't.
On 23 December 2019 17:50:58 CET, Peter Humphrey wrote:
>Hello list,
>
>Since I set
On Tuesday, December 24, 2019 10:53:13 AM CET Mick wrote:
> On Tuesday, 24 December 2019 06:40:13 GMT Dale wrote:
> > Howdy,
> >
> > It seems plasmashell and wallpapers for the desktop has a problem. I'm
> > not sure if it is just me or if it could affect others. Either way, I
> > have no idea h
On 16 February 2020 08:34:22 CET, Jens Pelzetter
wrote:
>Hello everyone,
>
>as I just noticed NetworkManager has stopped to manage the wired
>connection on my notebook. Even putting managed=true into the
>configuration does not change anything... NetworkManager simply says
>"Not managed" for wire
On 4 March 2020 16:04:01 CET, Nikos Chantziaras wrote:
>On 04/03/2020 15:41, Dale wrote:
>> [a lot of stuff]
>I know you only reboot every other decade, so I have to ask: did you
>reboot?
I have similar issues. Especially the black screen part.
It only happens when resuming after hibernation on m
On Wednesday, 4 March 2020 14:41:31 CET Dale wrote:
> Howdy,
>
> I did my usual Sunday upgrades the other day. There was a lot of
> upgrades to plasma and elogind it seems. Let's add LOo in there as well
> just for giggles. Anyway, I have a few oddities going on here. I'm not
> quite sure what
On 19 March 2020 18:19:38 CET, Peter Humphrey wrote:
>Hello list,
>
>I want to set up a web server on a local box, and I'm following the
>Gentoo
>guide[1]. I'd like two sites: one under /var/www/localhost and the
>other under
>/var/www/mydomain, in which mydomain is registered to me.
>
>The main
On Tuesday, March 24, 2020 4:55:49 AM CET andrey@gmail.com wrote:
> I've somehow built a kernel that won't accept any initramfs. To
> elaborate, it hangs in shell in dracut and panicks with a minimal
> initramfs as if it rejects the initramfs entirely and tries to boot an
> lvm volume, which of
On Tuesday, March 24, 2020 4:54:47 AM CET William Kenworthy wrote:
> Hi,
>
> I am giving a PD session to some techs on raspberry pi's and odroid
> arm systems running gentoo. It will be online through MS teams which
> works well through the google chrome browser using WebRTC. I would like
>
On Tuesday, March 24, 2020 10:57:59 PM CET andrey@gmail.com wrote:
> On Tue, Mar 24, 2020 at 2:45 AM J. Roeleveld wrote:
> > On Tuesday, March 24, 2020 4:55:49 AM CET andrey@gmail.com wrote:
> > > I've somehow built a kernel that won't accept any initramfs. To
On Wednesday, March 25, 2020 7:09:04 AM CET tu...@posteo.de wrote:
> Hi,
>
> the hardware consists of:
> AMD Ryzen 5 3600
> MSI Tomahawk MAX
> 32GB RAM (Corsair Venegeance 2x16GB,dual channel)
> NVidia RTX 2060 SUPER
>
> cat /proc/mtrr gives me
>
> reg00: base=0x0 (0MB), size= 2048MB
On Wednesday, March 25, 2020 1:09:27 PM CET Alec Ten Harmsel wrote:
> On Wed, Mar 25, 2020, at 08:04, Michael wrote:
> > I have not used Zoom, but the interwebs are screaming about the fly-by
> > malware silent installations that come with it. I don't know if this
> > applies to Linux too.
>
> My
On Saturday, August 17, 2019 4:56:01 AM CET Dale wrote:
> Howdy,
>
> I upgraded my system last night. I logged out and back in earlier and
> have noticed something new. It seems to only allow one instance of
> Dolphin to run at a time. I usually have three or four running for
> doing different
On Thursday, March 26, 2020 7:46:06 AM CET Dale wrote:
> J. Roeleveld wrote:
> > On Saturday, August 17, 2019 4:56:01 AM CET Dale wrote:
> >> Howdy,
> >>
> >> I upgraded my system last night. I logged out and back in earlier and
> >> have notic
On Thursday, March 26, 2020 9:47:37 AM CET Dale wrote:
> J. Roeleveld wrote:
> > On Thursday, March 26, 2020 7:46:06 AM CET Dale wrote:
> >> J. Roeleveld wrote:
> >>> Dale (and others),
> >>>
> >>> I found the location where this setting is.
&
On Thursday, March 26, 2020 10:03:46 AM CET Peter Humphrey wrote:
> On Thursday, 26 March 2020 08:47:37 GMT Dale wrote:
> > J. Roeleveld wrote:
> > > I do have activities and semantic-desktop enabled on mine.
> > >
> > > I attached a screenshot where I found th
On Thursday, March 26, 2020 10:49:56 AM CET J. Roeleveld wrote:
> On Thursday, March 26, 2020 10:03:46 AM CET Peter Humphrey wrote:
> > On Thursday, 26 March 2020 08:47:37 GMT Dale wrote:
> > > J. Roeleveld wrote:
> > > > I do have activities and se
On Thursday, March 26, 2020 7:50:29 AM CET andrey@gmail.com wrote:
> On Wed, Mar 25, 2020 at 8:23 AM J. Roeleveld wrote:
> > On Tuesday, March 24, 2020 10:57:59 PM CET andrey@gmail.com wrote:
> > > On Tue, Mar 24, 2020 at 2:45 AM J. Roeleveld wrote:
> > > >
On 27 March 2020 06:34:58 CET, tu...@posteo.de wrote:
>Hi,
>
>hopefully in the next daus my first SSD drive will arrive
>(corona makes everything more difficult...).
>
>To prevent an "installed and works"-experience which ends
>a month later in a damaged or over-weared SSD with a drastically
>short
On Friday, March 27, 2020 3:18:47 PM CET n952162 wrote:
> I want my wireless to continue when I close my laptop lid. Does anyone
> have a clue what I have to set to make that happen?
>
> I've followed it this far:
>
> /etc/acpi/events/lm_lid.sh
>/etc/acpi/actions/lm_lid.sh
>
On Wednesday, April 1, 2020 3:12:46 AM CEST William Kenworthy wrote:
> On 25/3/20 8:42 pm, Michael wrote:
> > On Wednesday, 25 March 2020 12:38:35 GMT Jorge Almeida wrote:
> >> On Wed, Mar 25, 2020 at 12:16 PM Alarig Le Lay
wrote:
> >>> On mer. 25 mars 11:51:33 2020, Jorge Almeida wrote:
> D
On 2 April 2020 07:10:02 CEST, William Kenworthy wrote:
>
>On 2/4/20 12:51 pm, J. Roeleveld wrote:
>> On Wednesday, April 1, 2020 3:12:46 AM CEST William Kenworthy wrote:
>>> On 25/3/20 8:42 pm, Michael wrote:
>>>> On Wednesday, 25 March 2020 12:38:35 GMT Jorge Al
On Thursday, April 2, 2020 12:13:38 AM CEST antlists wrote:
> On 01/04/2020 22:46, Dale wrote:
> > BTW, next time I'll find a printer that allows refilling and such too.
> > I don't like that chip thing. It counts against my page count on color
> > even if I print a black and white page. Still,
On Thursday, April 2, 2020 12:49:11 AM CEST Dale wrote:
> antlists wrote:
> > On 01/04/2020 22:46, Dale wrote:
> >> I still haven't bought it yet. I ordered some toner cartridges a while
> >> back for my printer. The site said that the ones I ordered fits my
> >> printer. Well, it appears they f
On Thursday, April 2, 2020 3:31:48 AM CEST Adam Carter wrote:
> > A simple read test with hdparm -t reveals:
> > 500 GB Crucial from 2016: Timing buffered disk reads: 1596 MB in 3.00
> > seconds = 531.46 MB/sec
> > 128 GB Sandisk from 2014: Timing buffered disk reads: 1532 MB in 3.00
> > seconds
On Saturday, April 4, 2020 6:45:58 AM CEST tu...@posteo.de wrote:
> Hi,
>
> I have discussed this on www.blenderartists.org and they asked
> me to ask here to sort out, whether the problem is a Blender-thing,
> a Linux-thing or a GENTOO-thing.
>
> My setup is as follows:
> NVidia RTX 2060 SUPER
>
On 5 April 2020 19:12:45 CEST, tu...@posteo.de wrote:
>Hi,
>
>currentlu I am preparing a new Gentoo Linux by compiling all
>the application I had on my old system.
>
>Due to delivery problems (corona) my SSD was delivered today
>(or yesterday...it depends...;) .
>
>When the whole compilation has fi
On Thursday, April 2, 2020 1:33:08 PM CEST n952162 wrote:
> (I see that /var/db/pkg/app-crypt/gnugp*/CONTENTS has ...)
>
> On 2020-04-02 13:30, n952162 wrote:
> > I see that /var/db/pkg/app-crypt/gnugp* has
> >
> > /usr/bin/gpg
> >
> > I re-emerged that, thinking maybe packages on the stage3 CD
On 6 April 2020 14:35:04 CEST, Ashley Dixon wrote:
>Hello,
>
>After many hours of confusing mixtures of pain and pleasure, I have a
>secure and
>well-behaved e-mail server which encompasses all the features I
>originally
>desired. However, in the event that I need to reboot the server
>(perhaps a
On 6 April 2020 18:02:22 CEST, Michael Orlitzky wrote:
>On 4/6/20 11:51 AM, Robert Bridge wrote:
>>
>> It is still commonly considered good practice to have a secondary MX
>server.
>
>[citation needed]
>
>
>> Why trust another party to correctly handle your email when your main
>system is offline
On 6 April 2020 19:14:35 CEST, Michael Orlitzky wrote:
>On 4/6/20 1:02 PM, Grant Taylor wrote:
>> On 4/6/20 10:43 AM, Michael Orlitzky wrote:
>>> Well, I can't refute an anecdote without more information, but if
>>> you're worried about this you can create the same MX record twice so
>
>>> that t
On 6 April 2020 19:25:13 CEST, Michael Orlitzky wrote:
>On 4/6/20 1:19 PM, J. Roeleveld wrote:
>>
>> I have missed emails coming from mailing lists, this one for example,
>due to no retries.
>> The proof for that is that I got replies to emails I never received.
>&g
On Monday, April 6, 2020 7:35:40 PM CEST Michael Orlitzky wrote:
> On 4/6/20 1:32 PM, J. Roeleveld wrote:
> > The messages were missing due to the MX being unavailable for a short
> > period. Retries were not attempted as I would have received them.
> >
> > The spa
On Monday, April 6, 2020 11:17:58 PM CEST Ashley Dixon wrote:
> On Mon, Apr 06, 2020 at 11:34:02AM -0600, Grant Taylor wrote:
> > On 4/6/20 6:35 AM, Ashley Dixon wrote:
> > > Hello,
> >
> > Hi,
>
> Hello,
>
> [O.T.] Unfortunately, Grant, I cannot reply to your direct e-mail. My best
> guess is t
On Tuesday, April 7, 2020 5:54:25 AM CEST Ian Zimmerman wrote:
> On 2020-04-06 22:14, Dale wrote:
> > I have DSL and it isn't to fast to begin with. At
> > times tho, I'm only getting about 20 or 30% of what I should.
>
> Are you often on the phone at those times? May it be poor filtering?
>
>
On Tuesday, April 7, 2020 5:14:14 AM CEST Dale wrote:
> Hey,
>
> As some may recall I bought a new router and modem. I was sort of
> hoping one or both of those would solve a issue I've noticed for a good
> long while. At times, my internet gets really slow, slower than it
> should be at least.
On 7 April 2020 21:40:56 CEST, Grant Edwards wrote:
>On 2020-04-07, Michael wrote:
>> On Tuesday, 7 April 2020 05:55:06 BST J. Roeleveld wrote:
>>> On Tuesday, April 7, 2020 5:54:25 AM CEST Ian Zimmerman wrote:
>>> > On 2020-04-06 22:14, Dale wrote:
>>>
Dale wrote:
>
>Well, I got the cable in. I hooked it up, nothing. H. Then I
>turned around to look at my regular monitor and KDE had a pop up about
>a
>new video device. Oh really. I clicked to set it up and now I have a
>picture. No sound tho. I can't watch videos with no sound. I'll n
James wrote:
>Hello,
>
>I'm having trouble getting a new install to boot. It's a recent Gigabit
>mobo, which supports EFI. I looked at the bios and all looks fine but
>it
>could be a misconfigure in the bios setting?
>
>
>It's a simple setup for now (/boot / and swap) When using gparted, I
>sele
On Fri, December 6, 2013 00:17, Canek Peláez Valdés wrote:
> On Thu, Dec 5, 2013 at 4:26 PM, Róbert ÄerÅanský
> wrote:
>> I will try openrc-force as temporal solution until I'll find a new
>> display manager and give heart breaking good by to GDM.
>
> You could *try* to run systemd and see i
On Fri, December 6, 2013 08:53, Michael Hampicke wrote:
>>
>> Just remove "init=/usr/lib/systemd/systemd" from your kernel command
>> line, and you can boot your old openrc installation (if you did un
>> unmerge it)
>>
>
> That should mean: ..if you did not unmerge it.
>
>
It doesn't seem that sim
Tanstaafl wrote:
>On 2014-01-06 2:53 PM, cov...@ccs.covici.com
>wrote:
>> I put such a thing in /etc/sysctl.conf like this -- I don't have
>> dovecot, but I needed it for crashplan
>> fs.inotify.max_user_watches=100
>> or whatever value suits.
>
>Ok, after your and Alans comments and some mor
Tanstaafl wrote:
>Current permissions are:
>
>Virtual domain dirs:
>/var/vmail/example1.com 777
>/var/vmail/example2.com 777
Do yourself a favour and reconsider the above 777 really carefully.
I have never needed to set anything wide open like that.
--
Joost
--
Sent from my Android device
Tanstaafl wrote:
>On 2014-01-25 7:18 AM, Peter Humphrey wrote:
>> I've been operating this way for years and maintained the kernel
>versions
>> manually. That was not a lot of work, with the help of some
>elementary bash-
>> ing and copy&pasting, and I don't want the flexibility of boot
>options
On Sat, February 1, 2014 16:59, walt wrote:
> I admit that Oracle finally did something right by requiring a white-list
> of all java websites you want to use, but it's taken me all morning to
> understand how to do it.
>
> AFAICT, the only way to white-list a website is to use the Java Control
> P
On 2 February 2014 01:21:52 CET, Stroller
wrote:
>
>On Sat, 1 February 2014, at 6:30 pm, J. Roeleveld
>wrote:
>> ...
>> If there is a better way, please let me know.
>>
>> The IPMI of my servers use a Java application to allow me to see the
>console.
&g
On 1 February 2014 20:15:13 CET, walt wrote:
>On 02/01/2014 10:30 AM, J. Roeleveld wrote:
>> On Sat, February 1, 2014 16:59, walt wrote:
>> An easier way then to use the silly jconsole might be found in the
>> following location:
>>
>> ~/.java/deployment/security
On 4 February 2014 22:27:03 CET, Grant Edwards
wrote:
>Are the VLAN configuration docs up to date?
>
>http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=4&chap=3#doc_chap10
>
>The reason I ask is that the Gentoo docs talk about using vconfig,
>while other distros have dropped vconfig and
On Wed, February 5, 2014 07:21, Alan McKinnon wrote:
> On 05/02/2014 01:27, walt wrote:
>> Being the only user of this machine, I could work up some outrage over
>> this
>> new PITA -- but I've decided not to be outraged. I pretend to be a
>> sysadmin
>> and imagine how I would feel if an arbitrar
On 5 February 2014 14:29:41 CET, Stroller
wrote:
>
>On Wed, 5 February 2014, at 5:31 am, J. Roeleveld
>wrote:
>> …
>> I disabled the udev device name randomizer to ensure I keep the eth*
>names.
>
>LOL. We seem to have a wholly different understanding of
1001 - 1100 of 1669 matches
Mail list logo
