Am 12.09.18 um 08:42 schrieb J. Roeleveld:
On Tuesday, September 11, 2018 11:48:59 AM CEST Stefan G. Weichinger wrote:
At first I emerged latest stable gentoo-sources, enabled these flags and
compiled ... but the lpfc module didn't detect the SAN devices
correctly, so I switched back to 4.1.15 (
Am 11.09.18 um 12:54 schrieb Mick:
Probably because you need a later version of gcc to compile the newer kernel
with.
I already installed gcc-6.4.0 and 7.3.0 some times ago. These should be
modern enough?
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_FS_POSIX_ACL=y
in my kernel ;-)
Have you tri
Am 12.09.18 um 09:43 schrieb Stefan G. Weichinger:
I see a multipath.conf on the system, will try to understand that.
Another thing I just noticed:
seems I have been cautious so far to keep sys-fs/multipath-tools at
version 0.5.0-r1 from 2016
portage would update to stable 0.6.4-r1
a
Am 12.09.18 um 10:09 schrieb Stefan G. Weichinger:
seems I have been cautious so far to keep sys-fs/multipath-tools at
version 0.5.0-r1 from 2016
portage would update to stable 0.6.4-r1
and maybe that would help creating /dev/sdX with a newer kernel as well
(instead of that flapping as
On Wed, Sep 12, 2018 at 5:59 PM Stefan G. Weichinger wrote:
> Am 11.09.18 um 12:54 schrieb Mick:
>
> > Probably because you need a later version of gcc to compile the newer
> kernel
> > with.
>
> I already installed gcc-6.4.0 and 7.3.0 some times ago. These should be
> modern enough?
>
Yep "Offi
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA512
Hi Folks,
To manage the overlays, there are two methodes. layman and eselect.
Which of this two methodes is recommended? Is layman just the old
method? Or is there some reason to use layman?
Regards
Klaus
- --
Klaus Ethgen
On September 12, 2018 7:43:12 AM UTC, "Stefan G. Weichinger"
wrote:
>Am 12.09.18 um 08:42 schrieb J. Roeleveld:
>> On Tuesday, September 11, 2018 11:48:59 AM CEST Stefan G. Weichinger
>wrote:
>>> At first I emerged latest stable gentoo-sources, enabled these flags
>and
>>> compiled ... but the lp
Hi,
I'd like to install a very simple configuration but fail (CUPS is my
most hated software)
I have two machines on a local network (i.e., I don't need any fancy
security mechanisms)
On one machine - called SERVER - I have a USB printer which works just
fine with CUPS.
I've tried to ma
On Wednesday, September 12, 2018 2:14:05 PM CEST J. Roeleveld wrote:
> On September 12, 2018 7:43:12 AM UTC, "Stefan G. Weichinger"
wrote:
> >Am 12.09.18 um 08:42 schrieb J. Roeleveld:
> >> On Tuesday, September 11, 2018 11:48:59 AM CEST Stefan G. Weichinger
> >
> >wrote:
> >>> At first I emerged
On Wed, Sep 12, 2018 at 12:53 PM, Klaus Ethgen wrote:
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> Hi Folks,
>
> To manage the overlays, there are two methodes. layman and eselect.
> Which of this two methodes is recommended? Is layman just the old
> method? Or is there some reason to
On Wed, Sep 12, 2018 at 3:33 PM, R0b0t1 wrote:
> On Wed, Sep 12, 2018 at 12:53 PM, Klaus Ethgen wrote:
>>
>> -BEGIN PGP SIGNED MESSAGE-
>> Hash: SHA512
>>
>> Hi Folks,
>>
>> To manage the overlays, there are two methodes. layman and eselect.
>> Which of this two methodes is recommended? I
On Wed, 12 Sep 2018 14:50:36 +0200, Helmut Jarausch wrote:
> On one machine - called SERVER - I have a USB printer which works just
> fine with CUPS.
> I've tried to make it "shared". This printer has the name USB_printer.
>
> On the other machine, which has no physical printer itself, I just
>
On 09/12/2018 03:55:16 PM, Neil Bothwick wrote:
On Wed, 12 Sep 2018 14:50:36 +0200, Helmut Jarausch wrote:
> On one machine - called SERVER - I have a USB printer which works
just
> fine with CUPS.
> I've tried to make it "shared". This printer has the name
USB_printer.
>
> On the other ma
On 09/12/2018 12:24 AM, J. Roeleveld wrote:
Does sudo have a shell-mode?
You can use "-i" to invoke a shell, but that's just the target users
destination shell.
I prefer to use a utility (wrapper) that I wrote that allows me to
leverage sudo in my user shell without having to think about it
On Tuesday, September 11, 2018 12:52:03 PM CEST Stefan G. Weichinger wrote:
> At a customer we were asked to log/protocol all my administrative
> activity for potential audits etc
>
> My admin-work is basically 98% ssh and maybe some additional tasks done
> via virt-manager (logging the work insid
On 09/12/2018 09:59 AM, J. Roeleveld wrote:
This piqued my interest and decided to google a little bit. Found the
following, which might help:
https://askubuntu.com/questions/93566/how-to-log-all-bash-commands-by-all-users-on-a-server
I would not want to rely on the PROMPT_COMMAND environmen
On Wed, 12 Sep 2018 17:21:14 +0200, Helmut Jarausch wrote:
> On 09/12/2018 03:55:16 PM, Neil Bothwick wrote:
> > On Wed, 12 Sep 2018 14:50:36 +0200, Helmut Jarausch wrote:
> >
> > > On one machine - called SERVER - I have a USB printer which
> > > works
> > just
> > > fine with CUPS.
> >
On Wednesday, 12 September 2018 16:21:14 BST Helmut Jarausch wrote:
> On 09/12/2018 03:55:16 PM, Neil Bothwick wrote:
> > On Wed, 12 Sep 2018 14:50:36 +0200, Helmut Jarausch wrote:
> > > On one machine - called SERVER - I have a USB printer which works
> > > just fine with CUPS.
> > > I've tried to
Am Wed, 12 Sep 2018 14:50:36 +0200
schrieb Helmut Jarausch :
> On one machine - called SERVER - I have a USB printer which works
> just fine with CUPS.
Just one maybe stupid question. Does this printer have Wifi support?
Then it would be a lot easier. If you would disconnect this printer
from th
On September 12, 2018 5:05:21 PM UTC, Grant Taylor
wrote:
>On 09/12/2018 09:59 AM, J. Roeleveld wrote:
>> This piqued my interest and decided to google a little bit. Found
>the
>> following, which might help:
>>
>>
>https://askubuntu.com/questions/93566/how-to-log-all-bash-commands-by-all-user
On 18-09-12 06:50 AM, Helmut Jarausch wrote:
Hi,
I'd like to install a very simple configuration but fail (CUPS is my
most hated software)
I have two machines on a local network (i.e., I don't need any fancy
security mechanisms)
On one machine - called SERVER - I have a USB printer which wo
On 9/11/18 6:52 AM, Stefan G. Weichinger wrote:
>
> At a customer we were asked to log/protocol all my administrative
> activity for potential audits etc
>
> My admin-work is basically 98% ssh and maybe some additional tasks done
> via virt-manager (logging the work inside the VMs there is anothe
On September 12, 2018 6:24:44 PM UTC, Heiko Baums wrote:
>Am Wed, 12 Sep 2018 14:50:36 +0200
>schrieb Helmut Jarausch :
>
>> On one machine - called SERVER - I have a USB printer which works
>> just fine with CUPS.
>
>Just one maybe stupid question. Does this printer have Wifi support?
>
>Then it
23 matches
Mail list logo
