Alan E. Davis wrote:
> CUPS has been working flawlessly for quite some time, one of the feats
> of newer GNU/Linux installs (to one who couldn't get an HP mainstream
> inkjet working right some 10 years ago).Simultaneously, I notices
> that Apple now owns the copyright, and after a recent upgra
On Sunday 06 January 2008, [EMAIL PROTECTED] wrote:
> People in this thread speak of 2 and 3 boots and editing in between
> in the same message where `5 minutes' is mentioned. That doesn't
> wash. You're way past that time frame. But still not in the guiness
> book realm I guess... hehe.
I guess
On Sunday 06 January 2008, [EMAIL PROTECTED] wrote:
> Erik <[EMAIL PROTECTED]> writes:
> > [EMAIL PROTECTED] skrev:
> >> Then you are stuck figuring out what on earth a hypervisor is.
> >
> > Alt+F2
> > wp:hypervisor
> > ENTER
>
> Hey thats a pretty neat trick. Now if I wondered if that would be
>
On Sat, 2008-01-05 at 19:06 +0200, Alan McKinnon wrote:
> trial-and-error is probably your best bet. Get it working with a full
> genkernel setup. Note which modules get used in real life, start
> removing them in batches and make notes when stuff breaks
>
> There's a reason for the existence o
Yes i've the same:
ls /lib/firmware/rt73.bin
/lib/firmware/rt73.bin
But i don't remember to setted up it.
Grant a écrit :
>> For rt73usb no firmware is needed. Just use vanilla kernel built-in module.
>>
>> as i did:
>>
>> CONFIG_RT2X00=m
>> CONFIG_RT2X00_LIB=m
>> CONFIG_RT2X00_LIB_USB=m
>> CONFI
On Sun, 6 Jan 2008 10:58:12 +0400
Yahya Mohammad <[EMAIL PROTECTED]> wrote:
> > > Just to know more on this... Is there really any reason to worry
> > > about kernel size... I mean in most cases with a standard desktop
> > > install?
> > >
> >
> > yes. Bigger kernel = more cpu cache used up = slo
Hi there,
I was on #gentoo yesterday asking about autofs & someone recommended
ivman instead.
Which does gentoo-users think I should use?
My principal interest is in NFS mounting /usr/portage on my PS3 & an
old laptop, as neither has a lot of disk-space - I have an always-on
server that c
I tried to send a comic strip as an attachment to my wife and I got a
Mailbox Unavailable error. I'm running:
baby log # emerge -pv exim
These are the packages that would be merged, in order:
Calculating dependencies... done!
[ebuild R ] mail-mta/exim-4.68 USE="exiscan exiscan-acl ldap mys
On 5 Jan 2008, at 16:05, [EMAIL PROTECTED] wrote:
Configuring a new kernel is a dreaded task here. It seems I walk
through a bewildering array of stuff that when pressing F1 on them I
get more bewildering information I barely understand a word of.
For 8 or 9 yrs now I've mostly skirted the is
On Saturday 05 January 2008, Richard Torres wrote:
> It's usually immediate. Has been for me in the past anyway.
Even when you 'top post' and use html messages in mailing lists?!
--
Regards,
Mick
signature.asc
Description: This is a digitally signed message part.
On Jan 6, 2008 7:42 AM, Michael Sullivan <[EMAIL PROTECTED]> wrote:
> I tried to send a comic strip as an attachment to my wife and I got a
> Mailbox Unavailable error. I'm running:
>
> baby log # emerge -pv exim
>
> These are the packages that would be merged, in order:
>
> Calculating dependenc
On Sun, January 6, 2008 7:55 am, Mark Shields wrote:
> On Jan 6, 2008 7:42 AM, Michael Sullivan <[EMAIL PROTECTED]> wrote:
>
>> I tried to send a comic strip as an attachment to my wife and I got a
>> Mailbox Unavailable error. I'm running:
>>
>> baby log # emerge -pv exim
>>
>> These are the pack
> Yes i've the same:
>
> ls /lib/firmware/rt73.bin
> /lib/firmware/rt73.bin
>
> But i don't remember to setted up it.
Well, it wasn't the kernel right? :)
Were you experimenting with driver packages for the rt73 outside of
the kernel? That's where mine came from. If you remove that firmware
you
>
>
>Try rmmod ehci-hcd, then modprobe ohci-hcd and see what happens.
>
>Also, include from /var/log/messages everything printed from when ohci-hcd is
>modprobed to then end of actually plugging in the Sansa. And again when
>trying ehci-hcd.
>
>--
ohci was not included in my kernel.
I recompil
Hi,
On Sun, 6 Jan 2008 08:12:10 -0600 (CST)
"Michael Sullivan" <[EMAIL PROTECTED]> wrote:
> I own espersunited.com, so it is on my end.
...and so should be exim's logs, right? I usually find it easier to read
actual error reports than (stripped) configurations for complex
software that is claime
On Sunday 06 January 2008, Dale wrote:
> Alan E. Davis wrote:
> >
> > Any ideas?
> I ran into something similar to the a while back and I had to un-merge
> cups, delete the config files, then reemerge cups and reconfigure my
> printer. Keep in mind that when you unmerge something, the config
> f
On Sun, 2008-01-06 at 17:47 +0100, Hans-Werner Hilse wrote:
> Hi,
>
> On Sun, 6 Jan 2008 08:12:10 -0600 (CST)
> "Michael Sullivan" <[EMAIL PROTECTED]> wrote:
>
> > I own espersunited.com, so it is on my end.
>
> ...and so should be exim's logs, right? I usually find it easier to read
> actual er
On Saturday 05 January 2008, [EMAIL PROTECTED] wrote:
> My apache server dosn't work after update.
>
> Recentrly, I have updated all portage tree and after that can't start.
>
> Does anyone know how to fix it?
>
> My apache version is: www-servers/apache-2.2.6-r5
>
> and /etc/init.d/apache2 start
On Sunday 06 January 2008, Stroller wrote:
> Hi there,
>
> I was on #gentoo yesterday asking about autofs & someone recommended
> ivman instead.
> Which does gentoo-users think I should use?
Dilemmas like this are best resolved by finding out what problem a
technology was designed to solve.
A go
On Sunday 06 January 2008, Mick wrote:
> On Saturday 05 January 2008, Richard Torres wrote:
> > It's usually immediate. Has been for me in the past anyway.
>
> Even when you 'top post' and use html messages in mailing lists?!
hehehehe, good one :-)
It's now 48 hours and my old address hasn't been
On Sunday 06 January 2008, Michael Sullivan wrote:
> On Sun, 2008-01-06 at 17:47 +0100, Hans-Werner Hilse wrote:
> > Hi,
> >
> > On Sun, 6 Jan 2008 08:12:10 -0600 (CST)
> >
> > "Michael Sullivan" <[EMAIL PROTECTED]> wrote:
> > > I own espersunited.com, so it is on my end.
> >
> > ...and so should b
Hi,
On Sun, 06 Jan 2008 11:09:15 -0600
Michael Sullivan <[EMAIL PROTECTED]> wrote:
> We use evolution. I tried using Squirrelmail and got this:
>
> Message not sent. Server replied:
> Requested action not taken: mailbox unavailable
> 550 Rejected: spam score 6.5
Ah, I see. Exi
Hi,
if an ebuild was executed with --buildpkg, is there an easy way to extract
the USE-flags that were in place from the resulting .tbz2?
Konstantin
--
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: [EMAIL PROTECTED]
Otkerstr. 28, 81547 Muenchen, Germany. Tel +49 89 69370185
--
Hi,
On Sun, 6 Jan 2008 19:05:18 + (UTC)
Konstantinos Agouros <[EMAIL PROTECTED]> wrote:
> if an ebuild was executed with --buildpkg, is there an easy way to extract
> the USE-flags that were in place from the resulting .tbz2?
qtbz2 -xO your.tbz2 | qxpak -xO - USE
-hwh
--
gentoo-user@lists.
On Sunday 06 January 2008, Konstantinos Agouros wrote:
> Hi,
>
> if an ebuild was executed with --buildpkg, is there an easy way to
> extract the USE-flags that were in place from the resulting .tbz2?
That is not possible as the information is not in the tarball.
--
Alan McKinnon
alan dot mckinn
On Sunday 06 January 2008, Alan McKinnon wrote:
> On Sunday 06 January 2008, Mick wrote:
> > On Saturday 05 January 2008, Richard Torres wrote:
> > > It's usually immediate. Has been for me in the past anyway.
> >
> > Even when you 'top post' and use html messages in mailing lists?!
>
> hehehehe, g
On Sunday 06 January 2008, Hans-Werner Hilse wrote:
> Hi,
>
> On Sun, 6 Jan 2008 19:05:18 + (UTC)
>
> Konstantinos Agouros <[EMAIL PROTECTED]> wrote:
> > if an ebuild was executed with --buildpkg, is there an easy way to
> > extract the USE-flags that were in place from the resulting .tbz2?
>
>
Florian Philipp <[EMAIL PROTECTED]> writes:
>> There's a reason for the existence of genkernel - it's so that you don't
>> have to go through all this pain and suffering, and can instead remove
>> stuff a bit at a time with reasonable confidence it won;t blow up in
>> your face :-)
>>
>
> Ther
Hi,
My son built a PC Friday using an Asus P5E motherboard. We went to
install Gentoo 2007.0 and found it didn't see the disk drives and
hence cannot be installed.
Clearly 2007.0 is getting quite loong in the tooth so we're
wondering if there something newer somewhere that we could use?
tha
On Sun, 6 Jan 2008 15:21:07 -0800, Mark Knecht wrote:
>My son built a PC Friday using an Asus P5E motherboard. We went to
> install Gentoo 2007.0 and found it didn't see the disk drives and
> hence cannot be installed.
Are these SATA drives? Are the controllers running as AHCI? I have a P5E
v
Mark Knecht wrote:
> Hi,
>My son built a PC Friday using an Asus P5E motherboard. We went to
> install Gentoo 2007.0 and found it didn't see the disk drives and
> hence cannot be installed.
>
>Clearly 2007.0 is getting quite loong in the tooth so we're
> wondering if there something newer s
On Jan 6, 2008 3:42 PM, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Sun, 6 Jan 2008 15:21:07 -0800, Mark Knecht wrote:
>
> >My son built a PC Friday using an Asus P5E motherboard. We went to
> > install Gentoo 2007.0 and found it didn't see the disk drives and
> > hence cannot be installed.
>
I have installed two or three times, deleted /etc/cups and reinstalled
the printer. It showed up as an HPLIP device when installing, w/ CUPS
and/or the kde printer utility. NOtably the utility OR the
localhost:631 interface did not show any option for a USB printer.
The address that ended up bei
On Sun, 6 Jan 2008 15:52:14 -0800, Mark Knecht wrote:
>The drive is SATA. I'm not familiar with AHCI. (What? Advanced Host
> controller Interface or something like that? If this is a driver that
> needs to be loaded let me know and I'll try booting again and looking
> around.
Yep, good guess
Alan E. Davis wrote:
> I have installed two or three times, deleted /etc/cups and reinstalled
> the printer. It showed up as an HPLIP device when installing, w/ CUPS
> and/or the kde printer utility. NOtably the utility OR the
> localhost:631 interface did not show any option for a USB printer.
On Jan 6, 2008 4:11 PM, Neil Bothwick <[EMAIL PROTECTED]> wrote:
> On Sun, 6 Jan 2008 15:52:14 -0800, Mark Knecht wrote:
>
> >The drive is SATA. I'm not familiar with AHCI. (What? Advanced Host
> > controller Interface or something like that? If this is a driver that
> > needs to be loaded let
Yes. Even installed as hplip, when jobs are printed, they are
immediately marked as "stopped" in the jobs interface. There is no
indication that the printer is on line at all, except that it shows up
as Ready.
Thank you,
Alan
On Jan 7, 2008 10:24 AM, Dale <[EMAIL PROTECTED]> wrote:
>
> Alan E
On Thu, 2008-01-03 at 13:16 -0800, BRM wrote:
[snip]
> However, that is not a solution I can use as I might not be the long
> term maintainer, and I'd like an easier solution as it requires a lot
> of work to download stuff. I'd like a solution similar to the
> following:
>
> # tar xvjf /portag
Alan E. Davis wrote:
> Yes. Even installed as hplip, when jobs are printed, they are
> immediately marked as "stopped" in the jobs interface. There is no
> indication that the printer is on line at all, except that it shows up
> as Ready.
>
> Thank you,
>
> Alan
>
> On Jan 7, 2008 10:24 AM, Dale
I'm working my way thru this document:
http://gentoo-wiki.com/HOWTO_Iptables_and_stateful_firewalls
Somewhere in this part: #Should_I_take_this_tutorial
(add it to the above url)
Once there scan for the work /proc and a few hits will get you to this
line: (emphasis is mine)
If you've al
Dale wrote:
> They recently changed it over to hplip. Is that installed on your system?
Sorry to steal the thread a bit, but should hplip show up as an option
for the driver to your printer? Because I still see hpijs as the
printer driver even though I have the hplip package.
--
Randy Barlow
h
[EMAIL PROTECTED] schrieb:
> Turns up nothing even close. Does it mean I'm still missing something
> in the kernel build? or is it just baloney or out of date?
Hi,
you can simply check our kernel config by typing:
cat /usr/src/linux/.config | grep -i conntrack
IIRC, there should be the line
Randy Barlow wrote:
> Dale wrote:
>
>> They recently changed it over to hplip. Is that installed on your system?
>>
>
> Sorry to steal the thread a bit, but should hplip show up as an option
> for the driver to your printer? Because I still see hpijs as the
> printer driver even though I
Dale wrote:
> On my system hpijs was a blocker if I recall correctly. I read
> somewhere that hpijs was no longer being maintained and that hplip was
> the "new thing" to use. Not sure why tho.
>
> Also may be worth noting that hplip used to be a service that was
> started as well. /etc/init.d/
Randy Barlow wrote:
> Dale wrote:
>
>> On my system hpijs was a blocker if I recall correctly. I read
>> somewhere that hpijs was no longer being maintained and that hplip was
>> the "new thing" to use. Not sure why tho.
>>
>> Also may be worth noting that hplip used to be a service that was
>
Am Montag, 7. Januar 2008 schrieb ext Dale:
> If you have two CD drives, you can boot Knoppix or another live CD and
> install from there.
Why two?
> I have never done this but have read where others
> have and had no problem.
Yep, did a Gentoo installation on a new laptop using a GRML 1.0 CD
Dirk Heinrichs wrote:
> Am Montag, 7. Januar 2008 schrieb ext Dale:
>
>
>> If you have two CD drives, you can boot Knoppix or another live CD and
>> install from there.
>>
>
> Why two?
>
>
>> I have never done this but have read where others
>> have and had no problem.
>>
>
> Yep,
47 matches
Mail list logo
