On Thu, 7 Sep 2006 21:19:12 +0800 (CST), Stephen Liu wrote:
> # ls -l /dev/vg /dev/mapper
> ls: /dev/vg: no such file or directory
> /dev/mapper:
> total 0
> crw-rw 1 root root control
>
> # ls -l /dev | grep vg
> no printout
>
> # vgchange -a y
> -bash: vgchange: command not found
Tha
Am Donnerstag, 7. September 2006 15:52 schrieb Dirk Heinrichs:
> Am Donnerstag, 7. September 2006 15:19 schrieb ext Stephen Liu:
> > # vgchange -a y
> > -bash: vgchange: command not found
>
> So, emerge lvm.
Must be: emerge lvm2
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162
Am Donnerstag, 7. September 2006 15:19 schrieb ext Stephen Liu:
> # vgchange -a y
> -bash: vgchange: command not found
So, emerge lvm.
Bye...
Dirk
--
Dirk Heinrichs | Tel: +49 (0)162 234 3408
Configuration Manager | Fax: +49 (0)211 47068 111
Capgemini Deutschland | Mail:
Hi Neil,
> > /dev/vg/usr
> > /dev/vg/home
> > /dev/vg/opt
> > /dev/vg/var
> > /dev/vg/tmp
>
> Do the devices exist? What does "ls -l /dev/vg /dev/mapper" say?
# ls -l /dev/vg /dev/mapper
ls: /dev/vg: no such file or directory
/dev/mapper:
total 0
crw-rw 1 root root control
# ls -l /dev
On Thu, 7 Sep 2006 20:10:34 +0800 (CST), Stephen Liu wrote:
> My problem is unable to mount following devices/partitions at booting;
>
> /dev/vg/usr
> /dev/vg/home
> /dev/vg/opt
> /dev/vg/var
> /dev/vg/tmp
Do the devices exist? What does "ls -l /dev/vg /dev/mapper" say?
--
Neil Bothwick
Top
Hi Neil,
> On Thu, 7 Sep 2006 19:09:58 +0800 (CST), Stephen Liu wrote:
>
> > > What does "zgrep BLK_DEV_DM /proc/config.gz" show?
> >
> > CONFIG_BLK_DEV_DM=y
> > # CONFIG_BLK_EEV_DM_BBR is not set.
> >
> > How to set it? By recompiling the kernel?
>
> Yes, but there's no need. This is the c
On Thu, 7 Sep 2006 19:09:58 +0800 (CST), Stephen Liu wrote:
> > What does "zgrep BLK_DEV_DM /proc/config.gz" show?
>
> CONFIG_BLK_DEV_DM=y
> # CONFIG_BLK_EEV_DM_BBR is not set.
>
> How to set it? By recompiling the kernel?
Yes, but there's no need. This is the correct setting (IMO). it means
Hi Neil,
Tks for your advice.
> > # modprobe de-mod
> > FATAL: Module dm-mod not found.
>
> You may have it compiled i the kernel rather than as a module. It
> makes
> little sense to use a module when you need it all the time.
I'll try to recompile the kernel on Gentoo itself. But I don't kno
On Wednesday 06 September 2006 18:20, Stephen Liu wrote:
> # modprobe de-mod
> FATAL: Module dm-mod not found.
>From http://www.gentoo.org/doc/en/lvm2.xml
Code Listing 2.9: Selecting the LVM2 module in a 2.6.x kernel
Device Drivers --->
Multi-device support (RAID and LVM) --->
[*] Multiple
Hi Dirk,
> > I haven't installed LVM2 intentionally.
>
> Yes you have, otherwise it wouldn't be there.
Starting Gentoo and login as root
To fix "Volume activation"
device-mapper: dm-linear: Device lookup failed
device-mapper: error adding target to table
Edited "/etc/evms.config"
under "Sysfs_
Am Mittwoch, 6. September 2006 14:20 schrieb ext Stephen Liu:
> Sorry, it's on the book:
> http://www.gentoo.org/doc/en/lvm2.xml
> Code Listing 2.1: Loading the LVM2 module
> # modprobe dm-mod
Then the book is wrong, or at least misleading. The header should then
be: "Loading the Device Mapper m
Hi Jeff,
> Sorry if this sounds harsh but if it works from the GUI but not from
> the
> commandline then the problem exists between keyboard and chair:
> you're not
> typing in the commands properly.
I tried dozen times on Ubuntu unable to activate LV. Sorry I don't
think it was keyboard problem
Hi Dirk,
> > At time of installation I ran;
> > # modprobe dm-mod
> > No printout
> >
> > Afterwards I found it for "Loading the LVM2 module". I ran LVM not
> > LVM2 so I did not care it further.
>
> There is no LVM2 module.
Sorry, it's on the book:
http://www.gentoo.org/doc/en/lvm2.xml
Code Li
-- Forwarded message --From: Stephen Liu <[EMAIL PROTECTED]>Date: 06-Sep-2006 10:02
Subject: Re: [gentoo-user] Re: Again - problem on installing Gentoo (Gentoo started)To: gentoo-user@lists.gentoo.orgHi Dirk,> > Your previous mail stated that you did not emerge lvm2.
Am Mittwoch, 6. September 2006 11:16 schrieb ext Stephen Liu:
> > Am Mittwoch, 6. September 2006 03:12 schrieb ext Stephen Liu:
> > > I think following warning is critical;
> > > device-mapper : dm-linear : Device lookup failed
> > > device-mapper : error adding target to table
> >
> > Did you com
Hi Dirk,
> Am Mittwoch, 6. September 2006 03:12 schrieb ext Stephen Liu:
>
> > I think following warning is critical;
> > device-mapper : dm-linear : Device lookup failed
> > device-mapper : error adding target to table
>
> Did you compile dm into the kernel (or: Is the dm-mod modules
> loaded?)
Hi Dirk,
> > Your previous mail stated that you did not emerge lvm2.
> > However, /dev/vg/usr IS a logical volume so it will never work
> > until you install the lvm2 software.
>
> He has EVMS installed, he doesn't need lvm2 tools.
My problem is LV not being activated on booting so all devices s
Am Mittwoch, 6. September 2006 03:12 schrieb ext Stephen Liu:
> I think following warning is critical;
> device-mapper : dm-linear : Device lookup failed
> device-mapper : error adding target to table
Did you compile dm into the kernel (or: Is the dm-mod modules loaded?)?
Bye...
Dirk
--
Am Mittwoch, 6. September 2006 09:07 schrieb ext Alan McKinnon:
> On Wednesday 06 September 2006 03:12, Stephen Liu wrote:
> > Hi folks,
> >
> > Fruther to my late posting, now Gentoo started finally, but
> > still having problem on mounting Logcial Volumes;
> > /dev/vg/usr
> > /dev/vg/home
> > etc
On Wednesday 06 September 2006 03:12, Stephen Liu wrote:
> Hi folks,
>
> Fruther to my late posting, now Gentoo started finally, but
> still having problem on mounting Logcial Volumes;
> /dev/vg/usr
> /dev/vg/home
> etc.
Your previous mail stated that you did not emerge lvm2.
However, /dev/vg/usr
Hi folks,
Fruther to my late posting, now Gentoo started finally, but still
having problem on mounting Logcial Volumes;
/dev/vg/usr
/dev/vg/home
etc.
"localhost login" started. Root login was possble.
/etc/fstab now looks like as follow:
tmpfs /newroot tmpfs rw 0 0
/dev/hdd /newroot/mnt/cdrom
21 matches
Mail list logo
