pport (former shm fs)
#########
Trenton Adams wrote:
> I have an ethernet controller that worked until I updated my udev to
> the latest version.
>
Regards,
--
Redouane BOUMGHAR
Physics, Remote Sensing and Digital Imagery Engineer
---
The biggest mountain can fear the slow man.
--
[
-0600, Trenton Adams wrote:
> I have an ethernet controller that worked until I updated my udev to
> the latest version.
> It shows up as follows from ifconfig
> eth0 Link encap:UNSPEC HWaddr
> 00-11-D8-00-00-7D-66-26-00-00-00-00-00-00-00-00
> inet addr:192.168.20.2 B
Actually, go back to Feb 12 with a message called "[gentoo-user]
Network problem", it worked for me.
udev may have changed your ethernet interface name. using "ifconfig
-a" to check.
On 5/2/07, Trenton Adams <[EMAIL PROTECTED]> wrote:
I've been having the same
I've been having the same problem with my ethernet device. I found on
the net that a link status of *UNSPEC* likely means the usermode
program does not match the running kernel. So, I figured it was
probably that I needed to upgrade my kernel, seeing that udev was
upgraded.
Unfortunately, the l
I have an ethernet controller that worked until I updated my udev to
the latest version.
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a1)
Subsystem: ASUSTeK Computer Inc. Unknown device 8141
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Ste
Hi guys,
Does anyone know of a kernel config manager that manages the kernel
configuration settings that I want? For instance, I want this network
driver, and that driver, and the other driver.
Want this to be managed outside the standard menu config because it
will make it easier to switch to
only. It may be a WinXP thing that it's not efficiently
using the RAM right or something.
> -Original Message-
> From: Trenton Adams [mailto:[EMAIL PROTECTED]
> Sent: Sunday, November 05, 2006 9:19 PM
> To: gentoo-user@lists.gentoo.org
> Subject: Re: [gentoo-user] Re
Yes, VMWare is fit for the task, simply because I would be using it on
a windows machine. Unless there is something better for a windows
machine?
Thanks for the hints.
On 11/3/06, Harm Geerts <[EMAIL PROTECTED]> wrote:
On Friday 03 November 2006 06:43, Trenton Adams wrote:
> Hi Guys
Hi Guys,
Has anyone here played with minimalizing everything for use in vmware?
Basically what I want to do is create a series of VERY tiny VMs that
are all independent of each other, which provide one service. For
instance, I might put apache on one VM, and tomcat on another, and so
on. Obvio
On 10/14/06, Steve Evans <[EMAIL PROTECTED]> wrote:
On Saturday 14 October 2006 06:21, Trenton Adams wrote:
> I use dispatch-conf all the time. I too have never looked back.
>
> I use diff="vimdiff -R %s %s" in /etc/dispatch-conf.conf
>
> NOT SURE WHAT '-R&#x
You could install VMWare.
On 10/13/06, bijayant kumar <[EMAIL PROTECTED]> wrote:
Hi to all,
I want to install MS outlook on the gentoo. Can it possible
to run MS outlook on gentoo-linux. If yes then how...??? Is any extra plugin
required to do the same. My main concern is that i
I use dispatch-conf all the time. I too have never looked back.
I use diff="vimdiff -R %s %s" in /etc/dispatch-conf.conf
NOT SURE WHAT '-R' IS now though. Perhaps it should not be there.
Then I add the following line to my .vimrc, which allows me to press
F2 to exit the vimdiff windows in one
The PORTAGE_BINHOST option is quit time consuming on emerges. But, if
you're only doing it once in awhile, in batched sets, it should be
just fine. The reason it takes so long is that it has to do an FTP
listing of the remote host, cache that info, and then finally it'll do
the merging.
I was d
Anyone know the stability of the 1.7.1 package?
FYI, I'm running amd64, which probably does not matter.
Thanks.
--
gentoo-user@gentoo.org mailing list
Hi Guys,
Is there a policy for the syncing of the mirrors, that would prevent
inconsistencies? I'm not talking about inconsistencies with the
master server(s), as that would be kind of difficult to have atomic
syncing between all servers involved. What I'm referring to is
inconsistencies in ter
++ BLAS_PROFILES='C F77'
-bash: /usr/share/eselect/modules/blas.eselect: line 69: syntax error
near unexpected token `('
-bash: /usr/share/eselect/modules/blas.eselect: line 69: `package() {'
On 10/12/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
Reordered for readabili
I did not know about python-updater. Should I re-install the old
version of python again, and then run python-updater? Right now it
complains about there not being an old version of python.
Gotta run to work for now though. :(
On 10/12/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Thur
All the directories all the way down the tree have r-x, and the files
are world readable.
On 10/11/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Thursday 12 October 2006 06:41, Trenton Adams wrote:
[SNIP]
> [22:41 [EMAIL PROTECTED] trenta]# eselect
[SNIP]
> Extra modules:
You create net.eth0, or whatever, by linking /etc/init.d/net.ethX to
/etc/init.d/net.lo The driver will create the actual kernel device
name of eth0, ath0, or whatever, and then your link will make it work.
On 10/11/06, Lord Sauron <[EMAIL PROTECTED]> wrote:
On Wednesday 11 October 2006 21:11,
enta]#
On 10/11/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Thursday 12 October 2006 04:56, Trenton Adams wrote:
> Hi guys, eselect doesn't appear to be working on my one computer
> (amd64) for some reason. I've re-emerged it already, but to no avail.
What is t
Hi guys, eselect doesn't appear to be working on my one computer
(amd64) for some reason. I've re-emerged it already, but to no avail.
I run
# eselect
and get the following...
Usage: eselect
Global options:
--no-color,--no-colourDisable coloured output
Built-in modules:
help
Hi Guys,
Is there a way of asking emerge to only merge the packages after all
dependencies have been successfully built into tar.bz2 packages?
--
gentoo-user@gentoo.org mailing list
Why does revdep-rebuild try and update packages that do not exist? Is
this a bug, or am I missing something?
# revdep-rebuild --library libstdc++.so.5 -- -p -v 2>&1
...
Calculating dependencies /
emerge: there are no ebuilds to satisfy "=dev-lang/python-2.3.5".
# equery list python
[ Searching
I remember getting this long ago for one of my programs. It occured
when I tried to use the wrong compiler, whether it was g++ or gcc, I
can't remember.
Anyhow, this is happening with the mail-filter/maildrop-2.0.1, which
is actually installed already, but won't compile right now. Mental
note t
I can't right now, as my logs for that don't exist, I forgot to put the 2>&1.
Right now I'm trying to revdep-rebuild so.6. We'll see how that goes first.
Thanks.
On 10/10/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Wednesday 11 October 2006 07:23,
Did this ever get resolved? I've been having the same problems with
kdemultimedia-arts.
On 7/8/06, David Corbin <[EMAIL PROTECTED]> wrote:
On Thursday 06 July 2006 19:43, Richard Fish wrote:
> On 7/6/06, David Corbin <[EMAIL PROTECTED]> wrote:
> > /usr/lib/gcc/i686-pc-linux-gnu/3.4.6/../../../.
ahhh, okay, thanks.
On 10/3/06, Catalin Trifu <[EMAIL PROTECTED]> wrote:
eselect java-vm
Catalin
Trenton Adams wrote:
> Hi Guys,
>
> I'm just a little curious why --set-user-classpath and
> --set-system-classpath are being done away with? Is there a
>
Hi Guys,
I'm just a little curious why --set-user-classpath and
--set-system-classpath are being done away with? Is there a
replacement facility for this functionality?
Thanks.
--
gentoo-user@gentoo.org mailing list
Okay, thanks.
On 9/4/06, Neil Bothwick <[EMAIL PROTECTED]> wrote:
On Sun, 3 Sep 2006 23:55:11 -0600, Trenton Adams wrote:
> I gett the following warning on step 2 of the www-apps/gallery-2.0.4
> installation.
>
> gallery file integrity Warning
> - Modified files (1)
>
I gett the following warning on step 2 of the www-apps/gallery-2.0.4
installation.
gallery file integrity Warning
- Modified files (1)
modules/ffmpeg/classes/FfmpegToolkit.class
Any ideas? Has this php script been hacked or what?
--
gentoo-user@gentoo.org mailing list
Sorry I didn't get back earlier.
Umm, all config files really. There are very few that this does not
happen with.
On 8/24/06, Robert Welz <[EMAIL PROTECTED]> wrote:
Trenton Adams wrote:
> Hi guys,
>
> Has anyone else noticed that dispatch-conf does not auto-merge
> pr
Hi guys,
Has anyone else noticed that dispatch-conf does not auto-merge
properly all the time? I get files in /etc/init.d/* for instance that
do not auto-merge. There's no way I modified any of the files in
there.
I checked bugzilla and haven't seen this reported before.
--
gentoo-user@gentoo.
was stuck on one speed, which was apparently not fast
enough for what I was doing. So, either a combination of the fan and
thermal modules did something, or just the thermal module.
Thanks again.
On 7/30/06, Richard Fish <[EMAIL PROTECTED]> wrote:
On 7/29/06, Trenton Adams <[EMAIL
Hi guys,
I have a notebook that I use with gentoo. I'm trying to create a
tar.gz backup of the entire thing. So, I boot up with 2005.x or
2006.0 livecd, or install cd. Both of them allow the system to over
heat, and it shuts down. This never used to happen. I believe it
worked fine with 2004
On 7/23/06, Hans-Werner Hilse <[EMAIL PROTECTED]> wrote:
Hi,
On Sun, 23 Jul 2006 02:42:43 -0600
"Trenton Adams" <[EMAIL PROTECTED]> wrote:
> I proposed this awhile back, and got shot down. At the time, the
> arguments for using SVN for portage storage were prett
On 7/23/06, Neil Bothwick <[EMAIL PROTECTED]> wrote:
On Sun, 23 Jul 2006 02:42:43 -0600, Trenton Adams wrote:
> Let's say openldap had a problem. So, we decide to mask the latest
> version of openldap, in an effort to roll back to the version that was
> working. Well, we fi
Hi guys,
I proposed this awhile back, and got shot down. At the time, the
arguments for using SVN for portage storage were pretty shallow, and
someone was able to easily shoot them down. I believe I have come up
with better reasoning for using SVN. Someone may still shoot them
down, but hey, i
Perhaps [EMAIL PROTECTED] should be removed from the list? I
keep getting the following messages after sending something to the
list...
On 7/20/06, [EMAIL PROTECTED]
<[EMAIL PROTECTED]> wrote:
General SMTP/ESMTP error.
Final-Recipient: rfc822; [EMAIL PROTECTED]
Last-Attempt-Date: Thu, 20 Jul
There appeared to be a version bump around 1.12, according to gentoo
change logs. This bumped it to 2.0. Does that mean that 1.12 is very
similar to 2.0, and that the version bump was really the only change?
Also, how about the jump to 2.5.2? I'm curious, becuase I have 1.12
on my system, and I
Thank you, it's working now. Why would it be using an xorg.conf found
in /root/? I deleted that one, and then it found it in /etc/X11/
On 7/17/06, Etaoin Shrdlu <[EMAIL PROTECTED]> wrote:
On Monday 17 July 2006 19:02, Trenton Adams wrote:
> I do not have radeon, or synaptics s
# grep -e EE -e WW /var/log/Xorg.0.log
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) Option "XkbOptions" requires an string value
(WW) Warning, couldn't open module v4l
(EE) Failed to load module "v4l" (module does not exist, 0)
(II) Loading extension MIT-SCREEN-SAVER
(
On 7/5/06, Richard Fish <[EMAIL PROTECTED]> wrote:
On 7/5/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> Hi guys,
>
> Where would I suggest a standard shell option to be incorporated into
> /etc/bash/bashrc?
bugs.gentoo.org would be the appropriate place. File it as an
Oh man, that would be s sweet. I want that too. :-P
On 7/5/06, Enrico Weigelt <[EMAIL PROTECTED]> wrote:
Hi folks,
i'd like to get automatic notification if something in an certain
package changes, ie. package foo has been masked, unmasked,
new version, ...
Is there any service for that
Hi guys,
Where would I suggest a standard shell option to be incorporated into
/etc/bash/bashrc?
I can't stand it when I logout of multiple shells, and get only the
history of the last one. Especially on root.
So, I use the histappend shell option.
shopt -s histappend
Wouldn't it be good to i
I would move ssh to a very high port number of your choice. Most ssh
port scanners do not bother checking anything other than port 22, as
it is too time consuming. I have not had any weird hits on my ssh
port in years. It was hammered daily, even with attempted logins and
such, with it running
I think you misunderstood what I was saying. I'm looking for an
ebuild file for a tomcat application.
On 7/5/06, Edwin Kapauni <[EMAIL PROTECTED]> wrote:
Trenton Adams wrote:
> Hi guys,
>
> What should I use as a base example package for a java application
> running unde
Hi guys,
What should I use as a base example package for a java application
running under tomcat? Also, should it be a webapp to be used with
webapp-config?
Any information on this would be appreciated.
Thanks.
--
gentoo-user@gentoo.org mailing list
thanks
On 6/20/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Wednesday 21 June 2006 01:56, Trenton Adams wrote:
> Nope, those mirrors do not change anything. I tried to use default
> mirrors, and it only tried three mirrors.
>
> Don't know why it's not workin
I synced my portage, but the problem is still occuring.
On 6/20/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
Nope, those mirrors do not change anything. I tried to use default
mirrors, and it only tried three mirrors.
Don't know why it's not working. Very odd.
On 6/20/06,
Nope, those mirrors do not change anything. I tried to use default
mirrors, and it only tried three mirrors.
Don't know why it's not working. Very odd.
On 6/20/06, Teresa and Dale <[EMAIL PROTECTED]> wrote:
Trenton Adams wrote:
> Anyone have an idea why this is happening
Anyone have an idea why this is happening? Did someone make a mistake
on the genkernel package?
Emerging (1 of 12) sys-kernel/genkernel-3.3.11d to /
Downloading http://gentoo.osuosl.org/distfiles/klibc-1.2.1.tar.bz2
--00:10:34-- http://gentoo.osuosl.org/distfiles/klibc-1.2.1.tar.bz2
Yeah, that's what I used to revert to the old openldap. Perhaps that
is enough. Hmmm.
On 6/19/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Monday 19 June 2006 22:15, Trenton Adams wrote:
> For example, with openldap, you're supposed to slapcat before
> upgrad
On 6/19/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Monday 19 June 2006 10:58, Trenton Adams wrote:
> > > One other benefit of this mechanism, that I can think of, would be
> > > that I could easily roll back to my last sync date or release, if some
> > &
Thanks for the reply. Interspersed comments below...
On 6/19/06, Bo Ørsted Andresen <[EMAIL PROTECTED]> wrote:
On Monday 19 June 2006 09:58, Trenton Adams wrote:
> Hi guys,
>
> I'm just curious about something. I've noticed many people report
> problems with the
Hi guys,
I'm just curious about something. I've noticed many people report
problems with their repository syncing simply because someone was in
the middle of committing to the repository. Couldn't this be resolved
by replacing the syncing mechanism with *svn* as opposed to rsync?
After all, it
The suggestion was to upgrade to gcc 3.4. That's what the bug report says.
On 6/16/06, Richard Watson <[EMAIL PROTECTED]> wrote:
Hi ... I've got exactly the same problem with after syncing. I've tried
resyncing a few times. Any help would be great. Thanks, Richard.
My output is:
==
sn't match current major release!
*No real problem, seems there's no database.
*
*
* All datadirs are fine, proceeding with merge now...
*
On 6/16/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
Hi guys,
After upgrading from 2.2.28-r3 to 2.3.24-r1, I noticed that there's
Hi guys,
After upgrading from 2.2.28-r3 to 2.3.24-r1, I noticed that there's a
problem in my LDAP server the prevents it from working at all. As a
result, I had to downgrade back to 2.2.
If I do an *ldapsearch* command, I get the following...
Internal (implementation specific) error (80)
Additi
Was it already decided that 3.4 was the defacto, before this bug was
found, or did someone make a mistake on the package too early? Just
curious. :)
On 6/15/06, leszek <[EMAIL PROTECTED]> wrote:
Le jeudi 15 juin 2006 à 14:53 -0600, Trenton Adams a écrit :
> Portage 2.1 (default-
tcpd threads truetype truetype-fonts type1-fonts vhosts
vorbis winbind xinerama xml xml2 xmms xorg xv xvid zlib elibc_glibc
kernel_linux userland_GNU"
Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL,
LDFLAGS, LINGUAS, PORTAGE_RSYNC_EXTRA_OPTS
On 6/15/06, Richard Fish <[EMAI
Hi guys,
I just wanted to check here first before I file a bug report. I
synced my portage yesterday and the day before, and keep getting a
compile failure on xine. I thought perhaps the portage was in an
inconsistant state, so re-synced a few times. But, it kept on failing
so I had to remove
Thank you Maxim. That was the problem. The funny thing is that swig
does not seem to require php5, but it supports the php use flag.
On 5/15/06, Maxim <[EMAIL PROTECTED]> wrote:
> > It says...
> >
> > [ebuild NS ] dev-lang/php-5.1.2
> > [ebuild R ] dev-lang/swig-1.3.21
> >
> > I don't
Hi guys,
I'm having weird symptoms on my gentoo 2005.x system. The system is
trying to install php-5.
It says...
[ebuild NS ] dev-lang/php-5.1.2
[ebuild R ] dev-lang/swig-1.3.21
I don't understand why it's trying to do this, as I have not asked for
php 5 to be installed. And I'm also
Hi everyone,
I just re-installed my system because all of a sudden I started
getting the following...
[15:44 [EMAIL PROTECTED] /] # su - trenta
Cannot execute /bin/bash: Permission denied
In addition, I am also unable to login from the console, or X. I get
"no shell: Permission Denied"
I'm sta
Oh, by the way, I'm leaving for about 2-3 days, so I'll be replying back then.
On 3/20/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> Hi everyone,
>
> I just re-installed my system because all of a sudden I started
> getting the following...
>
> [15:44 [EMAIL PR
inary
incompatibilities with your package build system.
On 3/13/06, Boyd Stephen Smith Jr. <[EMAIL PROTECTED]> wrote:
> On Monday 13 March 2006 14:54, "Trenton Adams" <[EMAIL PROTECTED]>
> wrote about '[gentoo-user] Updated gentoo systems and fresh installs':
> &g
Hi guys,
Is there a difference between the two? I have 2005.1 installed. As
I've always understood it, my system will now always be up-to-date, as
long as I keep updating it. Is 2006.0 any different than 2005.1 after
the system has been installed?
I'm just curious, because I have to install ge
Is there a package in gentoo for an open source tool like CPanel or
Ensim Pro web hosting tools, or something of the like?
--
gentoo-user@gentoo.org mailing list
ROFL. I knew someone would ask that question. But, I thought ahh,
I'll leave them hanging. ;)
On 1/31/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> On 1/31/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> > Apparently Mr Kernighan likes to use falacies! :) Poor Mr. K
On 1/31/06, Schleimer, Ben <[EMAIL PROTECTED]> wrote:
> I too am interested in knowing how to do this.
> Theres no obvious place in /etc/config.d/net(work?) to set new search
> domains in resolv.conf
> if anyone can provide info on this, I'd appricate it.
>
> Thanks!
> Ben
>
> "Debugging is t
Use ethereal, as it has a GUI.
On 1/25/06, Ernie Schroder <[EMAIL PROTECTED]> wrote:
> On Wednesday 25 January 2006 14:52, a tiny voice compelled Phil Sexton to
> write:
> > Ernie Schroder wrote:
> > > Is there no way of restarting the network on
> > > XP?
> >
> > From the dos prompt, command:
>
You can restart the network on XP by right clicking the network
connection and clicking "repair" I believe.
On 1/25/06, Ernie Schroder <[EMAIL PROTECTED]> wrote:
> On Wednesday 25 January 2006 13:42, a tiny voice compelled
> [EMAIL PROTECTED] to write:
> > Recheck (I assume you've checked it alrea
upgrade the firmware on the router.
On 1/25/06, Ernie Schroder <[EMAIL PROTECTED]> wrote:
> My son has a toshiba laptop running XP. When ever he plugs in his network
> cable, The router linksys goes down. I cannot ping it from my machine.
> Rebooting the router allows all machines to reach interne
> Not possible
on a windows machine. :P
--
gentoo-user@gentoo.org mailing list
as there.
Anyhow, found the options. :)
On 1/24/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> Hi everyone,
>
> I had heard that kernel 2.6.15 had VPN support. So, I went to
> http://gentoo-wiki.com/HOWTO_Set_up_a_vpn_client_with_mppe_encryption
> to figure out how to con
Hi everyone,
I had heard that kernel 2.6.15 had VPN support. So, I went to
http://gentoo-wiki.com/HOWTO_Set_up_a_vpn_client_with_mppe_encryption
to figure out how to configure my kernel compilation. The only
problem is, there doesn't appear to be PPP support anywhere in the
kernel.
Networking
Under the *nat rule,
-A PREROUTING -i eth0 -p tcp -m tcp --dport 58443 -j DNAT --to 192.168.7.1:443
Under the *filter rules.
-A ADAMS-FW-INPUT -i eth0 -m state --state NEW -m tcp -p tcp --dport
443 -j ACCEPT
On 1/20/06, Dmitry S. Makovey <[EMAIL PROTECTED]> wrote:
>
> somewhat offtopic, but si
Hi everyone,
I've been using gentoo linux for several months now. Right from the
very beginning I have noticed very odd behviour with it, in regards to
keyboard input. I have not seen this behaviour on other linux
distributions that use kernel 2.6.
Has anyone else noticed that ctrl-C using the
on the "java" command line put "-Djava.library.path=/usr/lib"
I don't know if gentoo has a config for this or not, I didn't know
ADDLDPATH existed. Who knows, perhaps editing the JRE version of that
file would help?
On 1/17/06, darren kirby <[EMAIL PROTECTED]> wrote:
> Hello all,
>
> I am trying
I just can't. To ignore such a message would just irritate me to no end. :P
On 1/17/06, Hemmann, Volker Armin <[EMAIL PROTECTED]> wrote:
> Hi,
>
> please ignore this mail, it is just a test.
>
> And don't flame me for it, it is legit. See bugzilla.
> --
> gentoo-user@gentoo.org mailing list
>
>
On 1/16/06, b.n. <[EMAIL PROTECTED]> wrote:
>
> > I'm wondering if we should be reporting this to the kernel guys. I
> > see this on *all* linux systems with kernel 2.6, but I'm not sure
> > about 2.4. But, I think I'll try enabling some options that Richard
> > mentioned first.
>
> Kernel guys k
On 1/16/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
> On Mon, 2006-01-16 at 10:46 -0700, Trenton Adams wrote:
> > Are you mounting with the "sync" option, or no? Try it with, and
> > without. If you do it without, time what it takes to do the copy, and
> >
On 1/16/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
> On Mon, 2006-01-16 at 10:46 -0700, Trenton Adams wrote:
> > Are you mounting with the "sync" option, or no? Try it with, and
> > without. If you do it without, time what it takes to do the copy, and
> >
On 1/15/06, Holly Bostick <[EMAIL PROTECTED]> wrote:
> Trenton Adams schreef:
> > On 1/14/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> >> On 1/14/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> >>> The old version could disable gnome, but 1.5
Are you mounting with the "sync" option, or no? Try it with, and
without. If you do it without, time what it takes to do the copy, and
unmount. unmount will do the actual sync.
I've noticed that linux in generall is extremely slow with USB devices
sometimes. My external USB2 (ATA 100) drive ge
On 1/14/06, Richard Fish <[EMAIL PROTECTED]> wrote:
> On 1/14/06, Trenton Adams <[EMAIL PROTECTED]> wrote:
> > The old version could disable gnome, but 1.5 can't. Perhaps it's a
> > firefox 1.5 ebuild limitation? I hope that's what it is,
On 1/14/06, Holly Bostick <[EMAIL PROTECTED]> wrote:
> Trenton Adams schreef:
> >
> > The old version could disable gnome, but 1.5 can't. Perhaps it's a
> > firefox 1.5 ebuild limitation? I hope that's what it is, because I
> > can't stan
On 1/13/06, Holly Bostick <[EMAIL PROTECTED]> wrote:
> Trenton Adams schreef:
> > Hi everyone,
> >
> > I'm just curious about something. I installed mozilla-firefox-bin,
> > and I got what I *thought* was the gnome open/save dialog. And I
> > absolut
On 1/14/06, Alexander Skwar <[EMAIL PROTECTED]> wrote:
> Graham Murray wrote:
> > Holly Bostick <[EMAIL PROTECTED]> writes:
> >
> >> So the reason why the open/save dialogs are the same is because they use
> >> the same resources (GTK settings, many of which can be set in GNOME).
> >
> > Yet the pr
On 1/13/06, Raphael Melo de Oliveira Bastos Sales
<[EMAIL PROTECTED]> wrote:
> Actually, mmx doesn't really mean anything:
>
> http://en.wikipedia.org/wiki/MMX
>
> mplayer and the X server gain performance by using these extensions
> (mmx, sse, sse2). One of the reasons why X is much faster in Gent
On 1/12/06, John Myers <[EMAIL PROTECTED]> wrote:
> On Thursday 12 January 2006 18:45, Tom Smith wrote:
> > Well, if they're /not/ mutually exclusive, another question that comes
> > up is...
> >
> > If a program is compiled with sse or sse2 support on a Pentium II, will
> > the program run slower
Hi everyone,
I'm just curious about something. I installed mozilla-firefox-bin,
and I got what I *thought* was the gnome open/save dialog. And I
absolutely I can't stand that thing. So, I decided to compile
mozilla-firefox for myself, as I have "-gnome" in my use flags. Well
for some reason, I
Thanks Holly, I actually did already read a review. I think it was
the link you sent. Not sure now. I'll check it out.
On 1/9/06, Holly Bostick <[EMAIL PROTECTED]> wrote:
> Tom Martin schreef:
> > On Sun, 8 Jan 2006 02:09:14 -0700
> > Trenton Adams <[EMAIL PROTE
Thanks. I will.
On 1/8/06, Tom Martin <[EMAIL PROTECTED]> wrote:
> On Sun, 8 Jan 2006 02:09:14 -0700
> Trenton Adams <[EMAIL PROTECTED]> wrote:
>
> > For those developing the graphical gentoo installer...
> >
> > Might I suggest a "search" box a
On 1/8/06, Ernie Schroder <[EMAIL PROTECTED]> wrote:
> On Sunday 08 January 2006 03:23, a tiny voice compelled Trenton Adams to
> write:
> > Well, could be many things. I've found fear of computers to be one
> > blocker to being better at computers than one can be. H
ROFL. :P I'm just saying that there's *always* room for improvement.
And this install thing is a good start. Automation, with flexibility
intact, is never a bad thing.
On 1/8/06, Abhay Kedia <[EMAIL PROTECTED]> wrote:
> On Sunday 08 January 2006 14:33, Trenton Ad
For those developing the graphical gentoo installer...
Might I suggest a "search" box at the bottom of the extra packages
screen, to be able to search for packages?
--
gentoo-user@gentoo.org mailing list
http://www.gentoo.org/proj/en/releng/installer/
On 1/8/06, Abhay Kedia <[EMAIL PROTECTED]> wrote:
> On Sunday 08 January 2006 13:57, Trenton Adams wrote:
> >
> > > Menu of what? How will a Gentoo developer know what you want to install?
> > > If you are starti
On 1/8/06, Abhay Kedia <[EMAIL PROTECTED]> wrote:
> On Sunday 08 January 2006 06:36, Trenton Adams wrote:
> >
> > Here we go again, who says that you have to limit it to a menu? Give
> > a menu, but allow a graphical shell during install for those that want
> >
On 1/8/06, Abhay Kedia <[EMAIL PROTECTED]> wrote:
> On Sunday 08 January 2006 03:25, Trenton Adams wrote:
> >
> > So, there's documentation that specifically explains that packages can
> > be split, and this can cause a conflict? I tried to find that, after
> &g
1 - 100 of 130 matches
Mail list logo
