On 2022-11-25 13:08, p...@xvalheru.org wrote:
Hi,
after packages full update NetworkManager is in inactive state
(rc-status). The NM version is 1.40.2. I've search web but without
luck. Can someone give me a hint how to fix it?
Thanks
Pat
Hi,
Sorry for this post. It turns out that i
Hi,
after packages full update NetworkManager is in inactive state
(rc-status). The NM version is 1.40.2. I've search web but without luck.
Can someone give me a hint how to fix it?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
show_bug.cgi?id=824066
emerge --info '=www-client/seamonkey-2.53.9.1-r1::gentoo'
[...]
dev-lang/rust: 1.56.1::gentoo
dev-lang/rust-bin: 1.53.0::gentoo
[...]
Of these two versions, it's trying to use 1.56.1, if I'm reading your
build log c
the data being
swapped is more highly compressible than zswap will take advantage of.
LMP
Thanks to all for hints. I've created a swap partition.
Pat
Freehosting PIPNI - http://www.pipni.cz/
p to file. I'm daily
hibernating the system to disk. And what should be the size od the swap
same as RAM or bigger?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
/etc/conf.d/net):
dhcpcd_enp0s3=""
config_enp0s8="192.168.56.13/24"
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
ted netifrc example file itself:
/usr/share/doc/netifrc-0.7.3/net.example.bz2
In there you can see how to configure with a static IP or dhcp each
interface
in turn. Copy that to your /etc/conf.d/net and edit it as you see fit.
Ask
if you get stuck on anything sp
to do?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
uot;,
line 99, in _async_wait
self._unregister()
File
"/usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please,
uot;,
line 99, in _async_wait
self._unregister()
File
"/usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please,
egister()
File
"/usr/lib64/python3.6/site-packages/_emerge/EbuildMetadataPhase.py",
line 147, in _unregister
self.scheduler.remove_reader(self._files.ebuild)
AttributeError: 'NoneType' object has no attribute 'ebuild'
**
Please, colud someone help?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
management. Is there other UI for VirutalBox?
You need to make sure the headless use-flag is disabled and the qt5
useflag is enabled if you want the GUI.
Kind regards, tastytea
Thanks, qt5 was disabled. It works now.
Pat
Freehosting PIPNI - http://www.pipni.cz/
ment. Is
there other UI for VirutalBox?
Thanks
Pat
You need to be a bit more specific about what you want to do. The
"VirtualBox" command launches the VirtualBox manager. Are you saying
it didn't get installed for you? I'm not aware of any other UI for
it. I don'
Hi,
I didn't use VirtualBox for a while and I find out that virtualbox-bin
package has dissapeard. So I've installed virtualbox 6.1.22 but there's
missing VurtualBox command to tun graphical management. Is there other
UI for VirutalBox
Is the system overheating?
https://en.wikipedia.org/wiki/Machine-check_exception has some links
to MCE decode programs
Hi,
I want to thank to all for suggestions. The problem was that RAM had
died. It was slow thus it made me to think that it is HDD.
Thanks again.
Pat
decide if those causes the freezing or not (I've saw such messages
earlier too, so I'm not sure). So, is there a good diagnostic tool to
check HW and mainly HDD? What I need to decide is if buying new HDD will
fix the issue or not.
Thanks a lot
Pat
nd
is about setting for whole system.
Thanks
Pat
A simple method would be to set up the PATH for this user to prepend a
local folder,
.e.g $HOME/bin
Then copy (or symlink) the desired Python version from /usr/bin to
that
folder under
a different name (i.e. without the (full) version n
On 2018-07-10 11:22, Helmut Jarausch wrote:
On 07/10/2018 10:23:05 AM, p...@xvalheru.org wrote:
Hi,
I need to set specific python version to a user and I don't want to
set
it up for whole system. Is it possible? If so how to do it. All I
found
is about setting for whole system.
Thanks
On 2018-07-10 11:19, Alexander Kapshuk wrote:
On Tue, Jul 10, 2018 at 11:23 AM wrote:
Hi,
I need to set specific python version to a user and I don't want to
set
it up for whole system. Is it possible? If so how to do it. All I
found
is about setting for whole system.
Thanks
Pat
Hi,
I need to set specific python version to a user and I don't want to set
it up for whole system. Is it possible? If so how to do it. All I found
is about setting for whole system.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
missing kernel configuration + some packages, but cannot
find hints on internet.
Can someone help?
Thanks
pat
Freehosting PIPNI - http://www.pipni.cz/
meone help?
Thanks
pat
Freehosting PIPNI - http://www.pipni.cz/
Hi,
Sorry for this offtopic, but is there a UI standalone application to
configure mouse? I'm using fluxbox and don't want to install gnome or
kde.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
[*] Hibernation (aka 'suspend to disk')
(/dev/sda2) Default resume partition
Thanks a lot this was the issue.
Pat
Freehosting PIPNI - http://www.pipni.cz/
f configuration, but cannot
find.
Thanks for help
Pat
Freehosting PIPNI - http://www.pipni.cz/
but I don't need snapshots and such stuff
mostly
scaling is requirement.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
I had a large partition with reiserfs.
Running fsck always failed due to running out of memory.
Partition was quite a b
d Digitus
which probably means nothing, lsusb shows
ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
The one I have is also USB3 and looks fast, but I didn't test it yet -
right now trying to setup gentoo :-)
Pat
Freehosting PIPNI - http://www.pipni.cz/
On 2017-10-05 23:01, Alan McKinnon wrote:
On 05/10/2017 21:39, p...@xvalheru.org wrote:
Hi,
I'm installing gentoo on new laptop which doesn't have eth slot. I
have
i-tec usb-eth adapter which works fine (tested on linux live
distribution).
For the first time: I've configured kernel, compile
ood
choice for that big partition.
I've thought about zfs, but I don't need snapshots and such stuff mostly
scaling is requirement.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
ow I've push it
all to work (ifconfig lists enp0s20f0u1 interface).
But after reboot plugging in the adapter doesn't create enp0s20f0u1
interface, so the ifconfig lists only 'lo'.
Please could somebody help?
Attached is kernel config, l
e again sorry for such question, the admins switch to ugly office 365
and help desk doesn't know about that :-(
Thanks and sorry
Pat
Freehosting PIPNI - http://www.pipni.cz/
is the text in login dialogue: "Enter your password
for @@:".
Could someone help?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
I emerge python3.4 set as active:
eselect python list
Available Python interpreters:
[1] python2.7
[2] python3.3
[3] python3.4 *
but it still complain
[ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14]
PYTHON_TARGETS="python3_4* -python3_3*"
!!! Multiple package instances within a
I emerge python3.4 set as active:
eselect python list
Available Python interpreters:
[1] python2.7
[2] python3.3
[3] python3.4 *
but it still complain about Multiple package instances
[ebuild U ] sys-apps/portage-2.2.20.1 [2.2.14]
PYTHON_TARGETS="python3_4* -python3_3*"
!!! Multi
On Sat, 17 Jan 2015 09:17:22 +, Markos Chandras wrote
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA512
>
> On 01/17/2015 12:58 AM, walt wrote:
> > On 01/16/2015 09:57 AM, pat wrote:
> >> Hi,
> >>
> >> I need help. I'm not able to start
reen blinks and returns to
lightdm. There's an error message in the .xsession-errors:
"/etc/lightdm/Xsession: line 74: /usr/bin/dbus-launch --exit-with-session
/usr/bin/ssh-agent -- startfluxbox: no such file or directory"
Could some point me
Switch from 3.12.21-gentoo-r1 to 3.15.6-gentoo fixed this problem.
Pat
On 2014-07-24 14:39, p...@xvalheru.org wrote:
Hi,
I've got new laptop and I'm not able to setup graphics card correctly
- the console and X.org are messed up. The graphics card is nVidia:
*-display
d
exit2 - /boot - 128G
sda5 - reiserfs - /
I've followed corresponding session in the installation guide using
fdisk and grub2, but still cannot boot :-(
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
There was missing active flag. Sorry for disturbing.
Pat
On 2014-07-23 09:57, p...@xvalheru.org wrote:
Hello,
I've got new HP Zbook and I'm trying to install gentoo on it, but I
have problem after reboot: "BootDevice not found, install OS on hard
drive". I'
0-7fff memory:8000-81ff ioport:5000(size=128)
memory:d008-d00f
I've follow the Gentoo howtos, but I didn't succeed. The kernel
configuration is attached and I want to use "nouveau".
Thanks a lot for help
Pat
---
Hi,
Please, could someone suggest easy to use proxy server which supports SSL?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
e solution.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Sun, 3 Mar 2013 08:39:44 +, Neil Bothwick wrote
> On Sun, 3 Mar 2013 00:06:56 +0100, pat wrote:
>
> > The HW is Dell Latitude e4310. I've tried hibernation script and also
> > pm-hibernate script with same result (logs are included). The grub line
> > is: kern
Thanks for suggestion. Well I don't want to depend on GTK or Qt.
Thanks
Pat
On Tue, 15 Jan 2013 08:22:03 -0500, Michael Mol wrote
> On Tue, Jan 15, 2013 at 6:55 AM, pat wrote:
> > Hello,
> >
> > Sorry for this off topic. I want to learn how to develop UI applic
Sorry, should search for xlib and not x.org :-|
Pat
On Tue, 15 Jan 2013 12:55:59 +0100, pat wrote
> Hello,
>
> Sorry for this off topic. I want to learn how to develop UI
> applications using Xlib. I've searched web, but I could not find a
> tutorial which will explai
Hello,
Sorry for this off topic. I want to learn how to develop UI applications using
Xlib. I've searched web, but I could not find a tutorial which will explain it
all (found some short examples). Please, could someone suggest a website or a
book?
Thanks
On Fri, 7 Sep 2012 00:14:00 -0400, Walter Dnes wrote
> On Thu, Sep 06, 2012 at 02:13:04PM +0100, pat wrote
> > On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
> > >
> > > Please post contents of /etc/conf.d/net
> > >
> > > --
> >
On Thu, 6 Sep 2012 08:37:33 -0700, Mark Knecht wrote
> On Thu, Sep 6, 2012 at 4:33 AM, pat wrote:
> > Hello,
> >
> > I've installed Gentoo into VirtualBox. I want it to has static IP address
> > and
> > I've followed Hand book instructions an
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
and I didn't compile driver as module but into kernel and when I switch to
dynamic IP address it works OK, so this is (probably
On Thu, 6 Sep 2012 14:00:22 +0100, Neil Bothwick wrote
> On Thu, 6 Sep 2012 13:21:43 +0100, pat wrote:
>
> > Yes, I did. When the Gentoo boots to shell there's only loop back
> > interface.
>
> Please post contents of /etc/conf.d/net
>
> --
> Neil Bothwi
On Thu, 6 Sep 2012 14:10:21 +0200, Michael Hampicke wrote
> 2012/9/6 pat
>Hello,
>
> I've installed Gentoo into VirtualBox. I want it to has static IP address
> and
> I've followed Hand book instructions and the OpenRC/net.example. After
> reboot
> there
tart with: ": waiting for net.eth0
(51)"; where the 51 is a time which decrements to 0.
I've searched net, but without success :-\
Can someone help me? The installation is fresh one.
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
t; for an "easy" way to build a reasonably advanced gui.
>
> Best regards
>
> Peter K
>
Hi Peter,
I have experiences with Swing UI and I'll suggest NetBeans.
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Thu, 2 Feb 2012 19:40:58 -0600, Canek Peláez Valdés wrote
> On Thu, Feb 2, 2012 at 5:07 PM, Hinnerk van Bruinehsen
> wrote:
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On 02.02.2012 23:03, Canek Peláez Valdés wrote:
> >> On T
On Thu, 2 Feb 2012 11:28:34 +0100, pat wrote
> On Thu, 02 Feb 2012 10:56:59 +0100, Hinnerk van Bruinehsen wrote
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> > On 02.02.2012 10:20, pat wrote:
> > > On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van
On Thu, 02 Feb 2012 10:56:59 +0100, Hinnerk van Bruinehsen wrote
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 02.02.2012 10:20, pat wrote:
> > On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van Bruinehsen wrote On
> > 01.02.2012 21:33, pat wrote:
> >>>
On Wed, 01 Feb 2012 23:30:42 +0100, Hinnerk van Bruinehsen wrote
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 01.02.2012 21:33, pat wrote:
> > On Wed, 01 Feb 2012 09:16:18 +0100, Hinnerk van Bruinehsen wrote On
> > 01.02.2012 00:34, pat wrote:
> >>>
On Wed, 01 Feb 2012 09:16:18 +0100, Hinnerk van Bruinehsen wrote
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 01.02.2012 00:34, pat wrote:
> > On Sun, 29 Jan 2012 10:34:36 +0100, pat wrote
> >> On Sun, 29 Jan 2012 14:49:33 +1100, Adam Carter wrote
> >
rk on last working one too :-( I've
been using tuxonice-sources-2.6.38-r1 and it worked about 6 months ago, but
not it doesn't :-(
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Sat, 28 Jan 2012 15:42:52 -0500, Michael Mol wrote
> On Sat, Jan 28, 2012 at 3:31 PM, pat wrote:
> > On Sat, 28 Jan 2012 19:08:17 +, Mick wrote
> >> On Saturday 28 Jan 2012 17:00:35 Canek Peláez Valdés wrote:
> >> > On Sat, Jan 28, 2012 at 6:52 AM, pat wrote
On Sat, 28 Jan 2012 19:08:17 +, Mick wrote
> On Saturday 28 Jan 2012 17:00:35 Canek Peláez Valdés wrote:
> > On Sat, Jan 28, 2012 at 6:52 AM, pat wrote:
> > > On Sat, 28 Jan 2012 13:46:37 +0100, Florian Philipp wrote
> > >
> > >> Am 28.
On Sat, 28 Jan 2012 13:46:37 +0100, Florian Philipp wrote
> Am 28.01.2012 12:38, schrieb pat:
> > Hi,
> >
> > I've used wireless network about half of a year ago. Now I need it and it
> > doesn't start :-( My gentoo is up to date.
> >
> &
Current kernel is tuxonice-sources-3.0.6 (planing upgrade to 3.0.17, but only
with wireless :-) ).
Please, could someone help me? I have no idea where to start :-\
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
On Wed, 30 Nov 2011 14:18:35 +0100, Michael Schreckenbauer wrote
> Am Mittwoch, 30. November 2011, 13:19:56 schrieb pat:
> > Hi all,
> >
> > Sorry for this off topic post, but I've been asked how/where to find maximum
> > size of bash variable value. I've
Hi all,
Sorry for this off topic post, but I've been asked how/where to find maximum
size of bash variable value. I've search and found 4M, 1k, 4k ... . But didn't
found how/where this limit is set. I know, that for C it's e.g. sizeof(int),
but for bash?
Thank
On Mon, 9 May 2011 09:15:33 +0100, Neil Bothwick wrote
> On Mon, 9 May 2011 08:41:04 +0200, pat wrote:
>
> > Nothing :-( Same output as for user: "No scanners were identified. If
> > you were expecting something different, check that the scanner is
> > plugged in,
On Sun, 8 May 2011 23:28:39 +0100, Neil Bothwick wrote
> On Mon, 9 May 2011 00:17:42 +0200, pat wrote:
>
> > I've bought USB scanner CanoScan LiDE210 which is listed with status
> > "complete" on sane-project. The driver backend name is "genesys".
&g
hotplug/usb/libsane.usermap
/etc/sane.d/genesys.conf
/lib/udev/rules.d/41-libsane.rules
so, I've added the correct records, but nothing :-(
Please, could someone help?
Thanks
Pat
[1] http://en.gentoo-wiki.com/wiki/USB_Scanner
Freehosting PIPNI - http://www.pipni.cz/
On Tue, 1 Mar 2011 21:51:00 +0100, pat wrote
> On Tue, 01 Mar 2011 12:31:47 -0800, walt wrote
> > On 03/01/2011 11:50 AM, pat wrote:
> >
> > >
> > > When using X.org with intel driver there's an error in log:
> > > FATAL: Module fbcon not found.
&g
On Tue, 01 Mar 2011 12:31:47 -0800, walt wrote
> On 03/01/2011 11:50 AM, pat wrote:
>
> >
> > When using X.org with intel driver there's an error in log:
> > FATAL: Module fbcon not found.
>
> I know nothing about Intel graphics, but my guess is that your
On Sun, 27 Jun 2010 23:45:00 +0200, pat wrote
> Hello,
>
> I have running gentoo vbox guest image. I've made its clone using VBoxManage
> clonehd ... and setup new vbox guest using this system copy.
> Everything is same except MAC address. When starting system from
> thi
address is somewhere cached in
the cloned system. I've googled how to reset this cached MAC address but
without luck :-(
Please, could you help me?
Thanks
Pat
Freehosting PIPNI - http://www.pipni.cz/
help
Pat
Freehosting PIPNI - http://www.pipni.cz/
file). I think this
> requires at least kernel 2.6.27.
>
> ~daid
Thanks, but problem is the events are not fired and I'm afraid I've did
somethink wrong during kernel configuration - missing "something" :-(
Thnaks for your time.
Pat
---
Modern Hosting PIPNI - http://www.pipni.cz/
On Tue, 08 Sep 2009 00:39:25 +0200, Pat wrote
> Hello,
>
> I want to setup hal to enable me switching between two keyboard layouts.
> My original configuration in xorg.conf is:
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver
and configure it like:
pc104
us,cz
grp:shifts_toggle
I have installed hal and running hald. The xorg-server version is 1.5.3-r6.
Thanks for help
Pat
On Thu, 13 Aug 2009 09:33:09 +0200, Remy Blank wrote
> Pat wrote:
> > I have interesting problem. When I running a video (using mplayer) and
> > another window partially overlap the video window the X.org crashes
> > (better say restarts) and the login screen appears.
>
: DualPoint TouchPad at isa0060/serio1/input0 lost sync at byte 1
psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 - driver resynched.
In my laptop I have track point and touch pad. In X.org I'm using only
the track point.
Thanks for help.
Pat
Section "ServerLayout"
xorg-server-1.5.3-r6
But this starts since I've bought new laptop Dell Latitude E4300.
Thanks for help
Pat
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice"Mouse0" &q
pat wrote:
> On Mon, 26 Jan 2009 16:08:33 +0100, Pat wrote
>> Hello,
>>
>> I'm using Gentoo on my laptop and quite often the graphic output goes
>> mad. There are messed lines and the contend is not readable. I've
>> made screen shots (attached). Please,
1-7.4,
mesa-7.2
Thanks a lot for the help
Pat
Falling back on "fixed"
Eterm: Error: Unable to load font
"-misc-fixed-medium-r-semicondensed--13-*-*-*-c-*-iso10646-1". Falling
back on "k14"
Eterm: FATAL: Couldn't load the fallback font either. Giving up.
Can someone help?
Thanks a lot
Pat
P.S.
Hello,
I've bought Dell Latitude E4300 and start to install Gentoo on it, but
the volume buttons don't work. Please, could someone give me hint where
I have to start to fix it?
Thanks a lot
Pat
P.S. kernel 2.6.26-gentoo-r4, architecture amd64
On Mon, 8 Dec 2008 14:59:00 +0100, pat wrote
> Hello,
>
> I've bought a new laptop with Core 2 Duo processor which is 64 bit.
> My question is if applications (see below) compiled and running over
> 64 bits are stable enough or if I should compile for 32 bits.
>
layer
- VirtualBox/VMware
- Qemu
- Kerberos/OpenLDAP/OpenSSH (for these I think they are stable)
- X.org/fluxbox
- system suspending
I have 4GB RAM and I know better is to compile for 64 bits, but for me is more
important stability.
Thanks a lot
Pat
e help? For me is not important if I use 2.6.23-gentoo-r3 kernel or
newer one, but I want to be able hotswap the devices.
Thanks a lot for help.
Pat
On Wed, 17 Sep 2008 21:11:29 -0300, Norberto Bensa wrote
> Quoting pat <[EMAIL PROTECTED]>:
>
> > Hilco Wijbenga wrote:
> > Or my be another question :-) I need to run more then one guest OS, so
> > I expect I need to create next bridge, but how?
>
>
Thanks to all !!! It works :-)
Pat
Hilco Wijbenga wrote:
On Tue, Sep 16, 2008 at 14:25, pat <[EMAIL PROTECTED]> wrote:
Hello,
I'm trying to setup virtualbox networking. I went through the tutorial at
gentoo wiki, but I have troubles ... obvious :-(
In the howto there's called /sbin/ip, but I have no idea in wh
n host and guest.
Thanks for help
Pat
On Fri, 05 Sep 2008 17:04:14 -0500, Dale wrote
> pat wrote:
> > Dale wrote:
> >> Grant Edwards wrote:
> >>> On 2008-09-05, Dale <[EMAIL PROTECTED]> wrote:
> >>>
> >>>> pat wrote:
> >>>>
> >>>>> Wel
Dale wrote:
Grant Edwards wrote:
On 2008-09-05, Dale <[EMAIL PROTECTED]> wrote:
pat wrote:
Well, I found "DontVTSwitch" and set it to "off" in the X.org
keyboard section
but doesn't help. Is it what you have meant?
Thanks
Pat
That may be
not work. Just
press the appropriate key if that is the case and it should work. (Took me a
while the first time to figure that one out too. A little annoying when it
gets pressed accidentally.)
> >
> > Ben
> >
> >
> >
> > - Original Message
> >
ll not work. Just press the appropriate key if that
> is the case and it should work. (Took me a while the first time to
> figure that one out too. A little annoying when it gets pressed
> accidentally.)
>
> Ben
>
> - Original Message
> From: pat <[EMAIL P
member the version ... .
Thanks for help
Pat
On Sun, 31 Aug 2008 14:49:14 +0200, pat wrote
> On Sun, 31 Aug 2008 14:43:03 +0200, Daniel Pielmeier wrote
> > pat schrieb am 31.08.2008 14:21:
> > > On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
> > >> pat schrieb am 31.08.2008 14:03:
> > >>
On Sun, 31 Aug 2008 14:43:03 +0200, Daniel Pielmeier wrote
> pat schrieb am 31.08.2008 14:21:
> > On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
> >> pat schrieb am 31.08.2008 14:03:
> >>> make.conf
> >>> ~
> >>>
On Sun, 31 Aug 2008 14:18:56 +0200, Daniel Pielmeier wrote
> pat schrieb am 31.08.2008 14:03:
> > make.conf
> > ~
> > USE="a52 accessibility -apm acpi alsa -arts audiofile browserplugin dbus
> > divx4linux -directfb -doc dts dvb dvd dvdr dvdread -eds -e
On Sun, 31 Aug 2008 06:45:14 -0500, Dale wrote
> pat wrote:
> > Hello,
> >
> > I'm trying to build virtualbox-ose, but it fails :-( I've googled but
> > without
> > luck.
> >
> > Error message is:
> >
> > Checking for Qt4 uic3:
pmost build error, and the call stack if
relevant.
* A complete build log is located at
'/var/tmp/portage/app-emulation/virtualbox-ose-1.6.4/temp/build.log'.
* The ebuild environment file is located at
'/var/tmp/portage/app-emulation/virtualbox-ose-1.6.4/temp/environment'.
*
Any suggestions?
Thanks
Pat
1 - 100 of 219 matches
Mail list logo
