Mon, 3 March 2025 in 12:45, Michael :
>
> On Sunday, 2 March 2025 23:08:34 Greenwich Mean Time gevisz wrote:
> > I have AMD/ATI RV740 PRO [Radeon HD 4770]
> > video card connected to the PCIEX16_1 port of
> > my Gigabyte GA-MA790FXT-UD5P motherboard
> > tha
I have AMD/ATI RV740 PRO [Radeon HD 4770]
video card connected to the PCIEX16_1 port of
my Gigabyte GA-MA790FXT-UD5P motherboard
that has no integrated video card.
My processor is AMD Phenom II X4 945,
and I believe that it has no integrated graphics
card on it as well.
This my belief is based on
вс, 16 февр. 2025 г. в 18:51, Wols Lists :
>
> On 01/02/2025 00:13, gevisz wrote:
> > The problem is that after booting with an additional HDD,
> > one of these ZFS HDDs does not report any of its disk id:
> > nor wwn neighter in the form ata-WDC_WD5000*.
> >
> &g
пт, 31 янв. 2025 г. в 13:26, Michael :
>
> On Thursday 30 January 2025 16:55:00 Greenwich Mean Time gevisz wrote:
> [snip ...]
>
> > After setting up one of them as a ZFS mirror, I immediately
> > got the problem that if I boot my system with additional HDD
> > co
; On 1/30/25 10:55 AM, gevisz wrote:
> > I should have used /dev/disk/by-id/ata-WDC_WD5000* notations instead!
> >
> > Unfortunately, I have not found the way to change these notations
> > other than deleting the whole zpool and re-creating it anew with
> > the nota
Correction: My second paragraph in the last email should read:
"Well, maybe you are right. I did NOT know this and so deleted the old kernel
immediately after compiling the new one."
пт, 31 янв. 2025 г. в 00:49, gevisz :
>
> чт, 30 янв. 2025 г. в 23:31, Grant Taylor :
> >
&
чт, 30 янв. 2025 г. в 23:31, Grant Taylor :
>
> On 1/30/25 11:49 AM, gevisz wrote:
> > I have not updated my Gentoo system since May 31, 2024, so in the
> > middle of October 2024 I had to install it anew.
>
> Why did you have to install it anew?
Because, as I wrote it, i
I have not updated my Gentoo system since May 31, 2024,
so in the middle of October 2024 I had to install it anew.
Just to remind you: during that time we all had to switch
to the new Gentoo profile scheme, which made an update
from my old system more difficult than a new install.
During this new
The small correction: the penultimate sentence
of my previous email should read:
"The situation remained the same even after swapping the
undetected 500GB WD HDD with the spare one."
чт, 30 янв. 2025 г. в 18:55, gevisz :
>
> About half a year ago my old 1.5TB SATA Green WD HDD
&g
About half a year ago my old 1.5TB SATA Green WD HDD
tapped me on the shoulder and said: "Hi, very soon you won't
be able to read any data from me."
As I have not made my backups regularly, I took this warning
seriously and decided to finally realize my old idea of moving
from ext4 to ZFS.
So, I
пн, 21 окт. 2024 г. в 14:33, netfab :
>
> Le 21/10/24 à 13:07, gevisz a tapoté :
> > Can somebody explain to me what it means?
>
> It seems that the "su" useflag is building the "su" utility, and that
> this useflag is enabled by default on gentoo.
&g
пн, 21 окт. 2024 г. в 14:38, Michael :
>
> On Monday 21 October 2024 12:07:47 BST gevisz wrote:
> > I skipped updating my profile from 17 to 23 in the beginning of June 2024
> > and are now installing Gentoo anew. I have disabled pam use flag globally
> > and now portag
I skipped updating my profile from 17 to 23 in the beginning of June 2024
and are now installing Gentoo anew. I have disabled pam use flag globally
and now portage complains that for the package linux-utils "the following
REQUIRED_USE flag constraints are unsatisfied: su? ( pam )"
I have tried and
сб, 31 авг. 2024 г. в 20:55, Michael :
>
> > I did not have success making the mail client (thunderbird in my case)
> > read from a local mailbox so I ended up configuring the MTA (nullmailer)
> > to forward the messages produced by my local daemons or shell scripts to
> > one of the external mail
сб, 31 авг. 2024 г. в 20:45, Michael :
> > > I expect any MTA would do the task of sending emails - but since you've
> > > installed s-nail check the configuration examples offered here:
> > >
> > > https://wiki.archlinux.org/title/S-nail
Thank you. I will look into this wiki.
> > email seems t
I want to set up ZFS Event Daemon Notifications to be sent by ZED to
my user account locally.
It is said in ZFS Gentoo Wiki (see,
https://wiki.gentoo.org/wiki/ZFS#ZFS_Event_Daemon_Notifications)
that to do this I have to set my email address in /etc/zfs/zed.d/zed.rc
However, I am afraid that it is
чт, 6 апр. 2023 г. в 13:24, Arve Barsnes :
> On Thu, 6 Apr 2023 at 12:12, gevisz wrote:
> > portage reported the following:
> >
> > The following USE changes are necessary to proceed:
> > (see "package.use" in the portage(5) man page for more details)
>
After running the following command to update my Gentoo:
# emerge --update --deep --with-bdeps=y --backtrack=120
--verbose-conflicts --ask world
portage reported the following:
The following USE changes are necessary to proceed:
(see "package.use" in the portage(5) man page for more details)
#
чт, 14 июл. 2022 г. в 10:53, Michael :
>
> On Thursday, 14 July 2022 07:19:14 BST gevisz wrote:
> > пт, 11 мар. 2022 г. в 20:15, gevisz :
> > > пн, 19 окт. 2020 г. в 00:15, gevisz :
> > > > вс, 18 окт. 2020 г. в 21:15, Dale :
> > > > > gevisz wrot
вс, 17 июл. 2022 г. в 19:18, gevisz :
>
> чт, 14 июл. 2022 г. в 14:57, Jude DaShiell :
> >
> > I'll go on a guess alsa got installed on the system.
Yes, it is.
> > If that is correct, please try a command as root in terminal
> > if necessary or on console:
&g
чт, 14 июл. 2022 г. в 14:57, Jude DaShiell :
>
> I'll go on a guess alsa got installed on the system. If that is correct,
> please try a command as root in terminal if necessary or on console:
>
>
> amixer set Master 100% unmute && alsactl store && aplay
> /usr/share/sounds/alsa/Front_Center.wav
>
пт, 11 мар. 2022 г. в 20:15, gevisz :
>
> пн, 19 окт. 2020 г. в 00:15, gevisz :
> >
> > вс, 18 окт. 2020 г. в 21:15, Dale :
> > >
> > > gevisz wrote:
> > > > вс, 18 окт. 2020 г. в 17:20, Dale :
> > > >> gevisz wrote:
> > > &
вт, 10 мая 2022 г. в 18:42, gevisz :
>
> сб, 7 мая 2022 г. в 12:47, Frank Steinmetzger :
> >
> > Am Thu, May 05, 2022 at 08:46:39PM +0300 schrieb gevisz:
> >
> > > It seems to me that the problem is somehow related
> > > to redrawing a frame. However, I
сб, 7 мая 2022 г. в 12:47, Frank Steinmetzger :
>
> Am Thu, May 05, 2022 at 08:46:39PM +0300 schrieb gevisz:
>
> > It seems to me that the problem is somehow related
> > to redrawing a frame. However, I am still not sure if
> > it is a problem of software or hardwar
пн, 2 мая 2022 г. в 22:54, gevisz :
>
> пн, 2 мая 2022 г. в 15:04, Michael :
> >
> > On Sunday, 1 May 2022 19:46:45 BST gevisz wrote:
> > > вс, 1 мая 2022 г. в 13:58, Michael :
> > > > On Saturday, 30 April 2022 12:49:59 BST gevisz wrote:
> >
>
пн, 2 мая 2022 г. в 15:04, Michael :
>
> On Sunday, 1 May 2022 19:46:45 BST gevisz wrote:
> > вс, 1 мая 2022 г. в 13:58, Michael :
> > > On Saturday, 30 April 2022 12:49:59 BST gevisz wrote:
>
> > > > Moreover, I am starting to suspect that
> > > &g
вс, 1 мая 2022 г. в 13:58, Michael :
>
> On Saturday, 30 April 2022 12:49:59 BST gevisz wrote:
> > пт, 29 апр. 2022 г. в 00:42, Frank Steinmetzger :
> > > Am Thu, Apr 28, 2022 at 09:20:08PM +0300 schrieb gevisz:
> > > > ср, 27 апр. 2022 г. в 13:55, Frank Steinm
пт, 29 апр. 2022 г. в 00:42, Frank Steinmetzger :
>
> Am Thu, Apr 28, 2022 at 09:20:08PM +0300 schrieb gevisz:
> > ср, 27 апр. 2022 г. в 13:55, Frank Steinmetzger :
> > >
> > > Am Sun, Apr 24, 2022 at 11:57:49PM +0300 schrieb gevisz:
> > >
> > > >
чт, 28 апр. 2022 г. в 21:20, gevisz :
> ср, 27 апр. 2022 г. в 13:55, Frank Steinmetzger :
> >
> > Am Sun, Apr 24, 2022 at 11:57:49PM +0300 schrieb gevisz:
> >
> > > After a recent update of my Gentoo system, I have noticed that some
> > > symbols ma
ср, 27 апр. 2022 г. в 13:55, Frank Steinmetzger :
>
> Am Sun, Apr 24, 2022 at 11:57:49PM +0300 schrieb gevisz:
>
> > After a recent update of my Gentoo system, I have noticed that some
> > symbols may be rendered incomplete in a text mode.
>
> What exactly do you mean
After a recent update of my Gentoo system,
I have noticed that some symbols may be
rendered incomplete in a text mode.
It happens in Gvim, in a web-browser and
in a dialog-window for saving files.
Maybe, also in xterm but I am not quite sure about it.
So, it is not specific to any application.
Fo
пт, 11 мар. 2022 г. в 20:49, Mark Knecht :
>
> On Fri, Mar 11, 2022 at 10:48 AM gevisz wrote:
>
> >
> > In addition to the old CPU, I have quite an old video card,
> > namely, ATI R4770. However, I still believe that it is possible
> > to compile tensorflow so
пн, 19 окт. 2020 г. в 00:15, gevisz :
>
> вс, 18 окт. 2020 г. в 21:15, Dale :
> >
> > gevisz wrote:
> > > вс, 18 окт. 2020 г. в 17:20, Dale :
> > >> gevisz wrote:
> > >>> No sound at least in Firefox. Tried it on youtube. Skype is curr
пн, 10 янв. 2022 г. в 18:16, Mark Knecht :
>
>
> >
> > Thank you for your reply, Mark.
> >
> > Unfortunately, you missed my previous message in this thread
> > where I wrote that I do have Ubuntu 20.04 on the same computer.
> > However, tensorflow fails to run on it because it is not compiled
> >
пн, 10 янв. 2022 г. в 01:29, gevisz :
>
> вс, 9 янв. 2022 г. в 16:52, Mark Knecht :
> >
> > On Sun, Jan 9, 2022 at 3:59 AM gevisz wrote:
> > >
> > > вс, 21 нояб. 2021 г. в 17:12, Mark Knecht :
> > > >
> > > > Congrats!
> &
вс, 9 янв. 2022 г. в 16:52, Mark Knecht :
>
> On Sun, Jan 9, 2022 at 3:59 AM gevisz wrote:
> >
> > вс, 21 нояб. 2021 г. в 17:12, Mark Knecht :
> > >
> > > Congrats!
> >
> > Thank you. However, it was not for long. On 30-12-2021 recompilation
вс, 9 янв. 2022 г. в 15:40, Dale :
>
> gevisz wrote:
> > вс, 9 янв. 2022 г. в 14:43, Dale :
> >> gevisz wrote:
> >>> вс, 9 янв. 2022 г. в 14:08, Arve Barsnes :
> >>>> On Sun, 9 Jan 2022 at 12:48, gevisz wrote:
> >>>>> The problem
вс, 9 янв. 2022 г. в 14:43, Dale :
>
> gevisz wrote:
> > вс, 9 янв. 2022 г. в 14:08, Arve Barsnes :
> >> On Sun, 9 Jan 2022 at 12:48, gevisz wrote:
> >>> The problem is that I do not know how to sync my Gentoo repository
> >>> to the state it was o
вс, 9 янв. 2022 г. в 14:08, Arve Barsnes :
>
> On Sun, 9 Jan 2022 at 12:48, gevisz wrote:
> > The problem is that I do not know how to sync my Gentoo repository
> > to the state it was on 12-12-2021.
> >
> > I use webrsync sync method via "emaint -A sync" a
I constantly have problems with updating/recompiling tensorflow.
Sometimes, it compiles ok but most of the time it is not.
The last time when it failed to recompile was on 30-12-2021.
I reported this in the thread "tensorflow-2.5.0-r1 compilation failed"
So, I decided to degrade my Gentoo system t
вс, 21 нояб. 2021 г. в 17:12, Mark Knecht :
>
> Congrats!
Thank you. However, it was not for long. On 30-12-2021 recompilation
of the same tensorflow-2.7.0 because of some changed dependencies
failed with the same f**ng "Bazel failed" error as before.
So, I am currently going to degrade my Gentoo
вс, 28 нояб. 2021 г. в 13:20, Poncho :
>
> On 28.11.21 12:09, gevisz wrote:
> > I have just noticed that the tor-browser I downloaded from its
> > official site does not start any more. :(
> > However, it started just a few weeks ago, before a few previous updates.
&g
I have just noticed that the tor-browser I downloaded from its
official site does not start any more. :(
However, it started just a few weeks ago, before a few previous updates.
Downloading its latest version has not changed anything in this respect.
Just for the history: all my attempts to compile any version of
tensorflow-2.5 failed.
However, yesterday I successfully compiled tensorflow-2.7.0.
So, now I am afraid to update it any more in the future. :(
ср, 20 окт. 2021 г. в 16:45, Mark Knecht :
>
> On Sat, Oct 16, 2021 at 11:34 PM gevisz wrote:
> >
> > сб, 16 окт. 2021 г. в 21:27, Mark Knecht :
> >
> > > I wish you the best of luck.
> >
> > Thank you. But so far no luck in my fourth attempt to compi
сб, 16 окт. 2021 г. в 21:27, Mark Knecht :
> I wish you the best of luck.
Thank you. But so far no luck in my fourth attempt to compile tensorflow.
I still get the same error. :(
сб, 16 окт. 2021 г. в 20:40, Mark Knecht :
>
> On Sat, Oct 16, 2021 at 9:50 AM gevisz wrote:
> >
> > To make things worse, I've got an "Illegal instruction (core dumped)"
> > error after installing and trying to run tensorflow from Ubuntu 20.04
>
To make things worse, I've got an "Illegal instruction (core dumped)"
error after installing and trying to run tensorflow from Ubuntu 20.04
which is installed on the same computer.
ERROR:
/var/tmp/portage/sci-libs/tensorflow-2.5.0-r1/work/tensorflow-2.5.0-python3_9/tensorflow/BUILD:974:20:
Linking of rule '//tensorflow:libtensorflow.so.2.5.0' failed (Exit 1):
gcc failed: error executing command
(cd
/var/tmp/portage/sci-libs/tensorflow-2.5.0-r1/work/tensorflow-2.5.0-python
чт, 18 февр. 2021 г. в 01:10, Michael :
>
> On Wednesday, 17 February 2021 21:45:35 GMT gevisz wrote:
>
> > Most probably, both my SATA disks have connection problems as
> > Oli Schmidt suggested from the very beginning, and because they
> > both have it, it points to t
ср, 17 февр. 2021 г. в 13:58, gevisz :
>
> ср, 17 февр. 2021 г. в 13:50, gevisz :
> >
> > ср, 17 февр. 2021 г. в 04:54, Edward :
> > >
> > > On 2/15/21 9:53 AM, gevisz wrote:
> > > > Yesterday, my relatively new install of Gentoo failed to b
ср, 17 февр. 2021 г. в 13:50, gevisz :
>
> ср, 17 февр. 2021 г. в 04:54, Edward :
> >
> > On 2/15/21 9:53 AM, gevisz wrote:
> > > Yesterday, my relatively new install of Gentoo failed to boot with the
> > > following repeated messages:
> > >
> &
ср, 17 февр. 2021 г. в 04:54, Edward :
>
> On 2/15/21 9:53 AM, gevisz wrote:
> > Yesterday, my relatively new install of Gentoo failed to boot with the
> > following repeated messages:
> >
> > ata5.04: SATA link down (SStatus 0 SControl 0)
> > ata5.04: hard r
do all update and
emerge tasks, and it works fine.
> On 2021-02-15 21:13, gevisz wrote:
> > пн, 15 февр. 2021 г. в 20:59, Jude DaShiell :
> >>
> >> Check the date and time when you boot and if it isn't correct, you
> >> probably have a dead battery on your mo
atch. :(
> On Mon, 15 Feb 2021, gevisz wrote:
>
> > Yesterday, my relatively new install of Gentoo failed to boot with the
> > following repeated messages:
> >
> > ata5.04: SATA link down (SStatus 0 SControl 0)
> > ata5.04: hard resetting link
> > ata5.04:
Yesterday, my relatively new install of Gentoo failed to boot with the
following repeated messages:
ata5.04: SATA link down (SStatus 0 SControl 0)
ata5.04: hard resetting link
ata5.04: failed to resume link (SStatus 0 Scontrol 0)
My first thought was that something is wrong with my old IDE (ATA)
ср, 23 дек. 2020 г. в 22:33, gevisz :
>
> I have just installed pycharm-community 2020.1.3 (marked stable) with
> its default settings (that is with +bundled-jdk use flag) on my newly
> installed Gentoo system and tried to start it using the following
> command:
> /opt/pyc
Recently, I got an e-mail on voting for the best software
of 2020 (including the preferred Linux distribution) on
LinuxQuestions.org and think that it may be of interest
for gentoo-users as well (and will help Gentoo to be better presented :).
Moreover, the more users will vote, the more interesti
I have just installed pycharm-community 2020.1.3 (marked stable) with
its default settings (that is with +bundled-jdk use flag) on my newly
installed Gentoo system and tried to start it using the following
command:
/opt/pycharm-community/bin/pycharm.sh
Unfortunately, pycharm crashed on the start r
сб, 19 дек. 2020 г. в 10:07, Nikos Chantziaras :
>
> On 18/12/2020 18:04, gevisz wrote:
> > During the last 22 years, I got used to the setting
> > when the XWindow system appeared on one of
> > the "graphical" virtual terminals, mostly on tty6 or tty7.
>
пт, 18 дек. 2020 г. в 18:26, bobwxc :
>
> 在 2020/12/19 上午1:29, gevisz 写道:
> > I am currently installing a new Gentoo system
> > on a computer that is run by a Gentoo system
> > that has not been updated since January 2019.
> >
> > Initially, I did so by chr
пт, 18 дек. 2020 г. в 17:22, Grant Edwards :
>
> On 2020-12-18, gevisz wrote:
>
> > During the last 22 years, I got used to the setting
> > when the XWindow system appeared on one of
> > the "graphical" virtual terminals, mostly on tty6 or tty7.
> >
I am currently installing a new Gentoo system
on a computer that is run by a Gentoo system
that has not been updated since January 2019.
Initially, I did so by chrooting to a newly formatted
disk partition. My intention was to build everything
in the chrooted environment and only then start
to wor
During the last 22 years, I got used to the setting
when the XWindow system appeared on one of
the "graphical" virtual terminals, mostly on tty6 or tty7.
However, after installing a new Gentoo system with
gentoo-kernel, I found out that the XWindow system
started to appear in the same tty, where I
ср, 16 дек. 2020 г. в 16:55, Rich Freeman :
>
> On Wed, Dec 16, 2020 at 9:45 AM gevisz wrote:
> >
> > Nevertheless, the explanation why /var/db/repos/gentoo is better than
> > /usr/portage is still welcomed. :)
> >
>
> There is a lengthy discussion on gentoo-
> On Wed, 16 Dec 2020 at 21:52, gevisz wrote:
> >
> > How would you comment the following quote from Gentoo Handbook
> > "In most situations, /usr/ is to be kept big: not only will it contain
> > the majority of applications, it typically also hosts the Ge
How would you comment the following quote from Gentoo Handbook
"In most situations, /usr/ is to be kept big: not only will it contain
the majority of applications, it typically also hosts the Gentoo ebuild
repository (by default located at /var/db/repos/gentoo) which already
takes around 650
пн, 19 окт. 2020 г. в 18:13, Dale :
>
> gevisz wrote:
> > пн, 19 окт. 2020 г. в 02:18, Dale :
> >> On the modules or in kernel, I compile all mine in the kernel. The only
> >> modules I have is my nvidia video drivers. There's pro's and con's to
> &
пн, 19 окт. 2020 г. в 02:18, Dale :
>
> On the modules or in kernel, I compile all mine in the kernel. The only
> modules I have is my nvidia video drivers. There's pro's and con's to
> each so whatever works and you like.
I actually asked a question not about the choice between "in kernel"
or "a
пн, 19 окт. 2020 г. в 00:15, gevisz :
>
> вс, 18 окт. 2020 г. в 21:15, Dale :
> >
> > gevisz wrote:
> > > вс, 18 окт. 2020 г. в 17:20, Dale :
> > >> gevisz wrote:
> > >>> No sound at least in Firefox. Tried it on youtube. Skype is curr
вс, 18 окт. 2020 г. в 21:15, Dale :
>
> gevisz wrote:
> > вс, 18 окт. 2020 г. в 17:20, Dale :
> >> gevisz wrote:
> >>> No sound at least in Firefox. Tried it on youtube. Skype is currently
> >>> uninstalled. So, I cannot check using it.
> >> Ju
вс, 18 окт. 2020 г. в 17:20, Dale :
> gevisz wrote:
> >
> > No sound at least in Firefox. Tried it on youtube. Skype is currently
> > uninstalled. So, I cannot check using it.
>
> Just a thought. Are you sure that everything is unmuted? Years ago,
> all the sound co
вс, 18 окт. 2020 г. в 17:19, David Haller :
> On Sun, 18 Oct 2020, gevisz wrote:
> >??, 18 ???. 2020 ?. ? 09:09, David Haller :
> [..]
> >> Try this in /etc/modprobe.d/alsa.conf (or some file there):
> >>
> >>
> >> alias char-major-116 snd
>
вс, 18 окт. 2020 г. в 19:03, gevisz :
>
> вс, 18 окт. 2020 г. в 09:09, David Haller :
> > On Sat, 17 Oct 2020, gevisz wrote:
> > >??, 17 ???. 2020 ?. ? 14:57, David Haller :
> > [..]
> > >Here is the comparative table for your kernel parameters vs those of
&
вс, 18 окт. 2020 г. в 09:09, David Haller :
> On Sat, 17 Oct 2020, gevisz wrote:
> >??, 17 ???. 2020 ?. ? 14:57, David Haller :
> [..]
> >Here is the comparative table for your kernel parameters vs those of
> >gentoo-kernel 5.4.64 and my last tried configuration in
&
вс, 18 окт. 2020 г. в 02:28, Walter Dnes :
>
> On Sat, Oct 17, 2020 at 10:53:43PM +0300, gevisz wrote
>
> > Thank you for your reply. I have actually used this approach in one of
> > my first attempts.
> > Below is the output of lsmod on the install usb with all
сб, 17 окт. 2020 г. в 20:06, Michael Orlitzky :
>
> On 10/17/20 3:56 PM, gevisz wrote:
> >
> > Well, compilation of tensorflow-2.3.1 failed exactly with the same error. :(
> >
>
> Can you file a bug with the full build log? Someone with a faster
> computer may be a
сб, 17 окт. 2020 г. в 20:34, gevisz :
>
> сб, 17 окт. 2020 г. в 15:28, Michael Orlitzky :
> > On 10/17/20 8:10 AM, gevisz wrote:
> > >
> > > Any thoughts on how to proceed with this obstacle other than to
> > > depclean tensorflow and try to reinstall it
сб, 17 окт. 2020 г. в 15:08, Walter Dnes :
>
> Here's a strategy I occasionally use...
>
> 1) Download a Gentoo "minimal install" and set up a USB key to boot from it.
>
> 2) Boot the PC from the install USB key.
>
> 3) Execute the command...
>
>lsmod | less
>
> 4) Manually scan the output fo
сб, 17 окт. 2020 г. в 14:57, David Haller :
> On Sat, 17 Oct 2020, gevisz wrote:
> >At different times during the last one and a half years, I tried to
> >make sound work on my new Gentoo install on a computer with Gigabyte
> >GA-MA790FXT-UD5P motherboard and MSI ATI Rade
сб, 17 окт. 2020 г. в 15:28, Michael Orlitzky :
> On 10/17/20 8:10 AM, gevisz wrote:
> >
> > Any thoughts on how to proceed with this obstacle other than to
> > depclean tensorflow and try to reinstall it again?
> > > The problem is that all versions of te
At different times during the last one and a half years, I tried to
make sound work on my new Gentoo install on a computer with Gigabyte
GA-MA790FXT-UD5P motherboard and MSI ATI Radeon R4770 graphic card.
Previously, I successfully solved the sound problems in Gentoo either
with alsamixer or by co
A week ago, on October 10, 2020, tensorflow-2.3.1 gracefully failed
to compile with the following
ERROR: sci-libs/tensorflow-2.3.1::gentoo failed (compile phase)
and a few weeks before tensorflow-2.2.0-r2 caused a dependency
conflict during a regular system update, so I updated my system
excluding
вс, 20 сент. 2020 г. в 15:37, Ashley Dixon :
>
> On Sun, Sep 20, 2020 at 02:23:58PM +0300, gevisz wrote:
> > вс, 20 сент. 2020 г. в 14:09, gevisz :
> > > When installing my new Gentoo installation, I tried to make it as
> > > close to the old one as it was possible
вс, 20 сент. 2020 г. в 14:09, gevisz :
>
> вс, 20 сент. 2020 г. в 12:20, Ashley Dixon :
> >
> > On Sun, Sep 20, 2020 at 11:59:10AM +0300, gevisz wrote:
> > > Thank you for your reply. Yes, I tried it after a reboot.
> > > As to your first question, I wil
вс, 20 сент. 2020 г. в 12:20, Ashley Dixon :
>
> On Sun, Sep 20, 2020 at 11:59:10AM +0300, gevisz wrote:
> > Thank you for your reply. Yes, I tried it after a reboot.
> > As to your first question, I will look into logs and report it a bit later.
>
> 1) Could you
вс, 20 сент. 2020 г. в 11:27, Ashley Dixon :
>
> On Sun, Sep 20, 2020 at 11:00:20AM +0300, gevisz wrote:
> > After a system update on 18.09.2020 of my Gentoo system, the
> > xorg-server failed to start with the following (last) error message:
> > dbus-core: error
After a system update on 18.09.2020 of my Gentoo system, the
xorg-server failed to start with the following (last) error message:
dbus-core: error connecting to system bus:
org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket
/run/dbus/system_bus_socket: No such file or directory)
пт, 10 апр. 2020 г. в 00:55, Michael :
>
> On Tuesday, 7 April 2020 14:36:04 BST gevisz wrote:
> > I have a long standing "gpg can't check signature: No public key"
> > error while running # emerge-webrsync
> > It appears because the webrsync-gpg feature has
чт, 9 апр. 2020 г. в 15:00, gevisz :
>
> чт, 9 апр. 2020 г. в 14:58, gevisz :
> >
> > After installing julia-1.3.0, I have tried to plot(rand(100)) in Julia
> > REPL as described in a tutorial but got an error message which basicly
> > says that julia cannot fin
чт, 9 апр. 2020 г. в 10:32, Nuno Silva :
>
> On 2020-04-09, gevisz wrote:
>
> > ср, 8 апр. 2020 г. в 19:31, gevisz :
> >>
> >> ср, 8 апр. 2020 г. в 18:13, Michael Orlitzky :
> >> >
> >> > The other thing you should be aware of is that dev-l
чт, 9 апр. 2020 г. в 14:58, gevisz :
>
> After installing julia-1.3.0, I have tried to plot(rand(100)) in Julia
> REPL as described in a tutorial but got an error message which basicly
> says that julia cannot find libQtGui.so.4 shared library.
> I googled the error message and fo
After installing julia-1.3.0, I have tried to plot(rand(100)) in Julia
REPL as described in a tutorial but got an error message which basicly
says that julia cannot find libQtGui.so.4 shared library.
I googled the error message and found it on Julia discourse forum:
https://discourse.julialang.org/
чт, 9 апр. 2020 г. в 10:32, Nuno Silva :
>
> On 2020-04-09, gevisz wrote:
>
> > ср, 8 апр. 2020 г. в 19:31, gevisz :
> >>
> >> ср, 8 апр. 2020 г. в 18:13, Michael Orlitzky :
> >> >
> >> > The other thing you should be aware of is that dev-l
ср, 8 апр. 2020 г. в 19:31, gevisz :
>
> ср, 8 апр. 2020 г. в 18:13, Michael Orlitzky :
> >
> > On 4/8/20 11:01 AM, gevisz wrote:
> > >
> > > Unfortunately, it did not helped.
> > >
> >
> > Before you do anything else, keyword all of t
ср, 8 апр. 2020 г. в 18:13, Michael Orlitzky :
>
> On 4/8/20 11:01 AM, gevisz wrote:
> >
> > Unfortunately, it did not helped.
> >
>
> Before you do anything else, keyword all of the latest suitesparse
> components:
>
> ~sci-libs/suitesparseconfig-5.4.0
&g
ср, 8 апр. 2020 г. в 16:00, Neil Bothwick :
>
> On Wed, 8 Apr 2020 17:45:25 +0300, gevisz wrote:
> > Anyway, it did not helped to emerge julia because of the following:
> >
> > # emerge julia
> >
> > These are the packages that would be merged, in order:
>
ср, 8 апр. 2020 г. в 17:19, gevisz :
>
> ср, 8 апр. 2020 г. в 13:29, Nuno Silva :
> >
> > On 2020-04-08, gevisz wrote:
> >
> > > I've tried to install julia-1.4.0 but one of its dependencies, namely,
> > > sci-libs/spqr-1.2.3-r1 fa
ср, 8 апр. 2020 г. в 13:29, Nuno Silva :
>
> On 2020-04-08, gevisz wrote:
>
> > I've tried to install julia-1.4.0 but one of its dependencies, namely,
> > sci-libs/spqr-1.2.3-r1 failed to emerge with the following error message:
> >
> > * Failed Running au
I've tried to install julia-1.4.0 but one of its dependencies, namely,
sci-libs/spqr-1.2.3-r1 failed to emerge with the following error message:
* Failed Running automake !
*
* Include in your bugreport the contents of:
*
* /var/tmp/portage/sci-libs/spqr-1.2.3-r1/temp/automake.out
* ERROR:
1 - 100 of 492 matches
Mail list logo
