On Thu, 2006-07-06 at 21:48 -0700, Richard Fish wrote:
> On 7/6/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
> > yes I would, except that I'm editing a class which is inherited by a
> > multitude of programs, so the /proc way I only have to change one file,
> > whereas the argv[0] way I have to cha
On 7/6/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
yes I would, except that I'm editing a class which is inherited by a
multitude of programs, so the /proc way I only have to change one file,
whereas the argv[0] way I have to change every source file...
No, that's the point of a global. Inher
On Thu, 2006-07-06 at 19:55 -0700, Richard Fish wrote:
> On 7/6/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
> > Someone mentioned that /proc is deprecated for 2.6? is this correct? Is
> > there a /sys alternative to /proc/self/status?
>
> Again, I *highly* suggest doing the standard, cross-platf
On 7/7/06, Colleen Beamer <[EMAIL PROTECTED]> wrote:
On 7/5/06, A. R. <[EMAIL PROTECTED]> wrote:
> > So, my question is, once I install ndiswrapper and the driver, do I then
> > follow the wiki for either wireless-tools or (preferred)
> > wpa-supplicant? Is there anything else I have to do or
On 7/5/06, A. R. <[EMAIL PROTECTED]> wrote:
> So, my question is, once I install ndiswrapper and the driver, do I then> follow the wiki for either wireless-tools or (preferred)> wpa-supplicant? Is there anything else I have to do or install?>
> Regards,>> Colleen>Hello,May I suggest that you try f
On 7/7/06, Mark Knecht <[EMAIL PROTECTED]> wrote:
On 7/6/06, Mark Knecht <[EMAIL PROTECTED]> wrote:
> Hi,
>HelpI cannot seem to find any good instructions for setting
> up a wireless NIC using ndiswrapper on Gentoo. Can someone point me in
> the right direction?
>
>The main Gentoo
On 7/6/06, Mark Knecht <[EMAIL PROTECTED]> wrote:
Hi,
HelpI cannot seem to find any good instructions for setting
up a wireless NIC using ndiswrapper on Gentoo. Can someone point me in
the right direction?
The main Gentoo doc I found:
http://www.gentoo.org/doc/en/handbook/handbook
On 7/6/06, Peter Ruskin <[EMAIL PROTECTED]> wrote:
Yes they do. I map the missing characters to AltGr+y, AltGr+[,
AltGr+] and Shift+AltGr+[ ... which produces:
←↑→↓
I thought of fonts too, but I already have most of the fonts in
portage - more than I had in xorg-6.8 (when it worked).
On 7/6/06, Richard Fish <[EMAIL PROTECTED]> wrote:
Use
Actually, I should have written:
<=x11-base/xorg-x11-7.0.99
The first case might give you ~x86 -rc releases of 7.1if any ever exist.
-Richard
--
gentoo-user@gentoo.org mailing list
On 7/6/06, W.Kenworthy <[EMAIL PROTECTED]> wrote:
Is there a way to easily stop the system upgrading until the stable
packages catch up? - without breakages?
Use version masks in your keywords file. So rather than
x11-base/xorg-x11 ~x86
Use
On 7/6/06, Iain Buchanan <[EMAIL PROTECTED]> wrote:
Someone mentioned that /proc is deprecated for 2.6? is this correct? Is
there a /sys alternative to /proc/self/status?
Again, I *highly* suggest doing the standard, cross-platform, and
most-efficient thing, which is to just store off the argv
On Thu, 2006-06-29 at 10:17 +0930, Iain Buchanan wrote:
> On Wed, 2006-06-28 at 16:01 +0200, Petr Uzel wrote:
>
> > file /proc/self/status is a link pointing to the
> > directory /proc/pid_of_process. And by parsing status file in this
> > directory
> > you should get all the informations you w
Recently finished getting CJK support for KDE done, via a howto in the
wiki. One of the requirements was to compile qt with the "immqt-bc"
useflag enabled. I discovered that I have two versions of qt
installed, one in slot 3 and one in slot 4, all well and good.
Version 3.3.6 of qt uses the immq
Mike,in case you are lazy, or haven't had the time too look, this is the guide i followed to set this up for my house, http://gentoo-wiki.com/HOWTO_setup_a_home-server
cynyrOn 7/6/06, Ow Mun Heng <[EMAIL PROTECTED]> wrote:
On Thu, 2006-07-06 at 20:09 -0400, Mike Markowski wrote:>echo "1" > /pro
Part of the process for upgrading to the new java system, and using
modular X (before it became stable) requires keywording
via /etc/portage/package.keywords.
What happens when the keywording is no longer necessary? It appears
that you slowly collect an ~x86 system as the keywords grow! - along
w
Hi,
HelpI cannot seem to find any good instructions for setting
up a wireless NIC using ndiswrapper on Gentoo. Can someone point me in
the right direction?
The main Gentoo doc I found:
http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=4&chap=4
doesn't mention ndiswrapper.
On Thu, 2006-07-06 at 20:09 -0400, Mike Markowski wrote:
>echo "1" > /proc/sys/net/ipv4/ip_forward
>
> What more needs doing?
Search through either gentoo-wiki or gentoo.org. IIRC there are step by
step instructions on doing this.
--
Ow Mun Heng <[EMAIL PROTECTED]>
--
gentoo-user@gentoo.or
Can anyone point me to a howto or advice for the following?
On my gentoo box I have:
- ppp dialup link to the internet (rural living is not very
broadband friendly yet)
- wireless access point on the ethernet interface
I'd like to use this box as a router so that any wireless traffic
On Fri, 2006-07-07 at 01:43 +0200, Frédéric Grosshans wrote:
> Le lundi 03 juillet 2006 à 09:44 -0400, John J. Foster a écrit :
> > Check your xorg.conf for the following:
> >
> > Section "DRI"
> > Mode 0666
> > EndSection
>
> but this line is already in my xorg.conf.
>
> Furthermore, it o
On 7/6/06, David Corbin <[EMAIL PROTECTED]> wrote:
/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/../../../../i686-pc-linux-gnu/bin/ld:
warning: libstdc++.so.5, needed by /usr/qt/3/lib/libqt-mt.so, may conflict
with libstdc++.so.6
/usr/lib/gcc/i686-pc-linux-gnu/3.4.6/../../../../i686-pc-linux-gnu/bin/ld:
w
Le lundi 03 juillet 2006 à 09:44 -0400, John J. Foster a écrit :
> On Mon, Jul 03, 2006 at 03:17:18PM +0200, Mauro Arnoldi wrote:
> > I installed ati-drivers and "partially" works correctly:
> >
> > As user nothing works:
> > ---
> > [...]
> > direct rendering: No
> > ---
> >
> > with roo
On Tuesday 04 July 2006 20:36, Richard Fish wrote:
> On 7/4/06, David Corbin <[EMAIL PROTECTED]> wrote:
> > Looking closer, my original copy of the error wasn't very complete.
> > There are screenfuls of undefined references to various std:: symbols.
> > Clearly my C++ library is messed up. How
Luigi Pinna wrote:
> (**) Option "XkbModel" "pc105"
> (**) Keyboard1: XkbModel: "pc105"
> (**) Option "XkbLayout" "de"
> (**) Keyboard1: XkbLayout: "de"
Okay. Just in case, what say 'grep "^(EE)" /var/log/Xorg.0.log'
and 'grep "^(WW)" /var/log/Xorg.0.log'. And better not snip things
that may
On 7/6/06, maxim wexler <[EMAIL PROTECTED]> wrote:
But your reply leads to other questions: IIRC portage
didn't say "applying updates", it just mentioned the
file at the end of the sync. Don't I have to run
update to actually "apply" the updates?
No, portage will do this "update" automatically
On Thursday 06 July 2006 20:20, Bertram Scharpf wrote:
> Hi,
>
> I'm migrating my router to Gentoo. Therefore I have to boot
> the old system from time to time. This I'm doing through a
> serial connection.
>
> Grub und the getty communicate to Minicom without complaint.
> However, the kernel messa
--- Richard Fish <[EMAIL PROTECTED]> wrote:
> On 7/5/06, maxim wexler <[EMAIL PROTECTED]> wrote:
> > /usr/portage/profiles/updates/2Q-2006
> >
> > which contains the following:
> >
> > move net-wireless/madwifi-tools
> > net-wireless/madwifi-ng-tools
> > move net-wireless/madwifi-driver
> > net-
Jarry wrote:
kashani wrote:
Does bind write logs about its activities somewhere?
Should it be in /var/log, or /chroot/dns/var/log?
Bind is like Apache in that it does its own logging. Here's my config
with all named logs split out into their own files. Just change the
paths to something loc
kashani wrote:
Does bind write logs about its activities somewhere?
Should it be in /var/log, or /chroot/dns/var/log?
Bind is like Apache in that it does its own logging. Here's my config
with all named logs split out into their own files. Just change the
paths to something local in your chr
Grant wrote:
> I had some trouble upgrading to xorg-x11-7.0 due to a mouse issue so I
> downgraded back to xorg-x11-6.8 via the -K emerge option. Now I'm
> trying to get back to 7.0 to test the fix and I can't seem to do it.
> After unmerging 6.8, 7.0 emerges just fine without or without the -K
>
Jarry wrote:
Hi,
I'm testing my chrooted bind/nameserver with dig/nslookup,
but I think I screwed up its configuration somehow, because
I'm not getting expected answers.
So I tried to search logs, but to my surprise, it seems to me
that bind does not make any logs. Or at least I can not find
an
Hi,
I'm testing my chrooted bind/nameserver with dig/nslookup,
but I think I screwed up its configuration somehow, because
I'm not getting expected answers.
So I tried to search logs, but to my surprise, it seems to me
that bind does not make any logs. Or at least I can not find
anything, just s
Hi,
I'm migrating my router to Gentoo. Therefore I have to boot
the old system from time to time. This I'm doing through a
serial connection.
Grub und the getty communicate to Minicom without complaint.
However, the kernel messages while booting get lost.
The Grub configuration is:
serial --uni
On Thu, 2006-07-06 at 17:56 +0100, Peter Ruskin wrote:
> Since upgrading to 7.0-r1 from 6.8 I've lost a few characters. I
> use xmodmap to get accented and other characters but four of those
> characers are now missing:
>
> leftarrow, rightarrow, uparrow and downarrow.
>
> When typed the
On Thu, 2006-07-06 at 01:54 -0700, Donnie Berkholz wrote:
> Ow Mun Heng wrote:
> > I'm still stucked on Xorg-6.8 and not intending to upgrade anytime soon
> > unless there is a lot of good things to expect out of it.
> > Right now, as long as there's no exploit/bug for xorg-6.8, I'll keep it
> > th
I had some trouble upgrading to xorg-x11-7.0 due to a mouse issue so I
downgraded back to xorg-x11-6.8 via the -K emerge option. Now I'm
trying to get back to 7.0 to test the fix and I can't seem to do it.
After unmerging 6.8, 7.0 emerges just fine without or without the -K
option. Trying to sta
On 7/5/06, maxim wexler <[EMAIL PROTECTED]> wrote:
/usr/portage/profiles/updates/2Q-2006
which contains the following:
move net-wireless/madwifi-tools
net-wireless/madwifi-ng-tools
move net-wireless/madwifi-driver
net-wireless/madwifi-ng
These are instructions to portage to move things around
On 7/6/06, Peter Ruskin <[EMAIL PROTECTED]> wrote:
Since upgrading to 7.0-r1 from 6.8 I've lost a few characters. I
use xmodmap to get accented and other characters but four of those
characers are now missing:
leftarrow, rightarrow, uparrow and downarrow.
When typed they just show up a
On 7/6/06, Molle Bestefich <[EMAIL PROTECTED]> wrote:
... snip ...
Any other suggestions?
Dont "snip". The relevant part comes *after* the "blocks" lines.
Also, you are mis-interpreting the "blocks" lines. The correct
reading of "X (is blocking Y)" is that you have (or should have) X
insta
On 7/6/06, Grant <[EMAIL PROTECTED]> wrote:
I upgraded my laptop to modular xorg but X won't start. Based on the
errors I see, it seems to be due to the mouse in some way. I've tried
compiling xorg-x11 with only 'synaptics' and both 'synaptics' and
'mouse' in my INPUT_DEVICES. I've also commen
On 7/6/06, Grant <[EMAIL PROTECTED]> wrote:
I upgraded my laptop to modular xorg but X won't start. Based on the
errors I see, it seems to be due to the mouse in some way. I've tried
compiling xorg-x11 with only 'synaptics' and both 'synaptics' and
'mouse' in my INPUT_DEVICES. I've also commen
Grant wrote:
> It looks like modular xorg installs gentoo-xcursors by default. How
> can I give them a try in xfce4?
To do it on the system level, create
/usr/local/share/cursors/xorg-x11/default/ and drop an index.theme file
in there:
$ cat /usr/local/share/cursors/xorg-x11/default/index.theme
I thought that you meant to add synaptics as a USE flag (but not
sure). Anyway, try to change "/dev/mouse" to "/dev/mice" and see if
it gets any better.
On 06/07/06, Grant <[EMAIL PROTECTED]> wrote:
I upgraded my laptop to modular xorg but X won't start. Based on the
errors I see, it seems to
and, or in fluxbox please?
On 06/07/06, Grant <[EMAIL PROTECTED]> wrote:
It looks like modular xorg installs gentoo-xcursors by default. How
can I give them a try in xfce4?
- Grant
--
gentoo-user@gentoo.org mailing list
--
Regards,
Mick
--
gentoo-user@gentoo.org mailing list
Grant wrote:
> I upgraded my laptop to modular xorg but X won't start. Based on the
> errors I see, it seems to be due to the mouse in some way. I've tried
> compiling xorg-x11 with only 'synaptics' and both 'synaptics' and
> 'mouse' in my INPUT_DEVICES. I've also commented and uncommented the
>
It looks like modular xorg installs gentoo-xcursors by default. How
can I give them a try in xfce4?
- Grant
--
gentoo-user@gentoo.org mailing list
I upgraded my laptop to modular xorg but X won't start. Based on the
errors I see, it seems to be due to the mouse in some way. I've tried
compiling xorg-x11 with only 'synaptics' and both 'synaptics' and
'mouse' in my INPUT_DEVICES. I've also commented and uncommented the
two 'Driver' lines be
On 7/6/06, Lord Sauron <[EMAIL PROTECTED]> wrote:
On 7/5/06, Ryan Tandy <[EMAIL PROTECTED]> wrote:
> Steven Susbauer wrote:
> >
> > On Wed, 5 Jul 2006, Ryan Tandy wrote:
> >
> >> Lord Sauron wrote:
> >>> If you can, what I'd do is try and get the guy's MAC Address or
> >>> something and then tota
Konstantinos Agouros wrote:
> Hi,
>
> compiling xorg-server fails on my amd64 complaining about something
> not defined in a glxXXX header file. VIDEO_CARDS is set to nvidia and
> nv.
>
> Anybody had similar problems?
Try updating your emul-xlibs package to 7.0.
Thanks,
Donnie
signature.asc
On Thu, 6 Jul 2006 08:44:06 + (UTC), Konstantinos Agouros wrote:
> compiling xorg-server fails on my amd64 complaining about something
> not defined in a glxXXX header file. VIDEO_CARDS is set to nvidia and
> nv.
I've had a couple of other programs fail with this sort of error. Using
"eselect
Hi,
compiling xorg-server fails on my amd64 complaining about something
not defined in a glxXXX header file. VIDEO_CARDS is set to nvidia and
nv.
Anybody had similar problems?
Konstantin
--
Dipl-Inf. Konstantin Agouros aka Elwood Blues. Internet: elwood@agouros.de
Otkerstr. 28, 81547 Muenchen,
On Thu, 06 Jul 2006 11:26:55 +0200, Alexander Skwar wrote:
> Generally speaking, yes, you can. Your system will be slower,
> but that's of course to be expected, as it is busy.
Setting PORTAGE_NICENESS in make.conf will help here, but there'll still
be some slowdown.
--
Neil Bothwick
I am Loc
Uwe Thiem wrote:
> On 06 July 2006 10:27, Alexander Skwar wrote:
>> Dirk Heinrichs wrote:
>> > Yes. Open files are not overwritten,
>>
>> Uh? Open files *ARE* overwritten! That's Linux, not Windows or HP-UX!
>
> No, open files are not overwritten. The new file with the same name (and path
> of co
Hi,
I recently installed cyrus-imapd server (2.2.12).
I looked into the impad.conf file and found:
tls_ca_path:/etc/ssl/certs
tls_cert_file: /etc/ssl/cyrus/server.crt
tls_key_file: /etc/ssl/cyrus/server.key
So, cyrus has installed its own certs:
#equery belongs /et
On 06 July 2006 10:27, Alexander Skwar wrote:
> Dirk Heinrichs wrote:
> > Yes. Open files are not overwritten,
>
> Uh? Open files *ARE* overwritten! That's Linux, not Windows or HP-UX!
No, open files are not overwritten. The new file with the same name (and path
of course) is written to disk, tru
Am Donnerstag, 6. Juli 2006 11:27 schrieb ext Alexander Skwar:
> Dirk Heinrichs wrote:
> > Yes. Open files are not overwritten,
>
> Uh? Open files *ARE* overwritten! That's Linux, not Windows or HP-UX!
Hmm, how does it work, then? Because the old version ist still in memory?
Bye...
Dirk
Dirk Heinrichs wrote:
> Yes. Open files are not overwritten,
Uh? Open files *ARE* overwritten! That's Linux, not Windows or HP-UX!
Alexander Skwar
--
The more laws and order are made prominent, the more thieves and
robbers there will be.
-- Lao Tsu
--
gentoo-user@gentoo.org mai
Pawel K wrote:
> Hello
>
> I've changed -march from pentrium4 to pentium3 and
> wanted to recompile everything.
What does this have to do with the "iptables wiki"? IOW: Please
do *NOT* capture threads! Do *NOT* reply to a message and change
the subject, when you want to start a new thread! Thanks
Lord Sauron wrote:
> On 7/5/06, Alexander Skwar <[EMAIL PROTECTED]> wrote:
>> Lord Sauron wrote:
>> How should *THAT* help? In 99.999% of
>> the times, the attacker won't be on the same subnet, and thus the
>> MAC isn't available.
>
> Couldn't hurt.
Well, as it doesn'
Ow Mun Heng wrote:
> I'm still stucked on Xorg-6.8 and not intending to upgrade anytime soon
> unless there is a lot of good things to expect out of it.
> Right now, as long as there's no exploit/bug for xorg-6.8, I'll keep it
> that way.
Yep, that's your prerogative. But the next exploit may not
Molle Bestefich wrote:
> Unfortunately, the spurious xorg-x11-6.9 package just shows at the top
> of the tree:
> Calculating world dependencies... done!
> [blocks B ] >=sys-apps/shadow-4.0.14-r2 (is blocking
> sys-apps/pam-login-4.0.14)
> [blocks B ] <=x11-base/xorg-x11-6.9 (is blocking
>
On 7/6/06, Pawel K <[EMAIL PROTECTED]> wrote:
1) How can I recompile all of them ?
I don't want to download new packages, I just want to
recompile existing ones.
emerge -e
2) Can I work on that machine during recompilation. I
mean what happens with binaries that are currently
executed and nee
On Wed, 2006-07-05 at 21:19 -0700, Donnie Berkholz wrote:
> Richard Fish wrote:
> > Just want to give a big public "Thank You" to spyderous for hanging
> > out in -user and helping out those who had/are having trouble with the
> > modular-X upgrade.
>
> I've been trying to do the same on the forum
Am Donnerstag, 6. Juli 2006 10:22 schrieb ext Pawel K:
First, please don't start a new thread by replying to an existing one
(aka "Thread hijacking"). Thanks.
> I've changed -march from pentrium4 to pentium3 and
> wanted to recompile everything. I've used the
> following command to do that:
>
>
Daniel da Veiga wrote:
Try "emerge -Dtpv world", it will give you a hierarquical tree
that will show what package is seeking to downgrade xorg.
Thanks for the tip!
Unfortunately, the spurious xorg-x11-6.9 package just shows at the top
of the tree:
# emerge -Dtp world
These are the packages t
Hello
I've changed -march from pentrium4 to pentium3 and
wanted to recompile everything. I've used the
following command to do that:
emerge --update --deep --newuse world
but only about 50% packages have been recompiled.
1) How can I recompile all of them ?
I don't want to download new packages
On Wed, 05 Jul 2006 20:59:09 -0500, Dale wrote:
> > Have you tried kmyfirewall ?
> I didn't know it existed actually. It would be so nice if there was
> somewhere we could go to find out about all this stuff. There is no
> telling how many programs are out there that we have no clue exists.
ht
On 7/5/06, Alexander Skwar <[EMAIL PROTECTED]> wrote:
Lord Sauron wrote:
> Sorry to be a bit elementary, but if you're not colocating your box,
> and you don't often use SSH, you might want to consider disabling
> remote administrative things.
Of course - disable everything, that you don't need.
On 7/5/06, Ryan Tandy <[EMAIL PROTECTED]> wrote:
Steven Susbauer wrote:
>
> On Wed, 5 Jul 2006, Ryan Tandy wrote:
>
>> Lord Sauron wrote:
>>> If you can, what I'd do is try and get the guy's MAC Address or
>>> something and then totally block that off. That's send him away right
>>> quickly. I
68 matches
Mail list logo
