Thanks Rolf. I didn't not nothing about that.
:)
2015-11-25 11:35 GMT+01:00 Rolf-Werner Eilert :
> I use KSnapshot, and it should be able to make a snapshot of an expanded
> menu.
>
> You could choose "Window under mouse-pointer" and/or a delay of x
> seconds which you use to expand the menu.
>
Ok. Thanks I'll try it.
2015-11-25 11:58 GMT+01:00 Moviga Technologies :
>
>
> KSnapShot is being deprecated. KScreenGenie is taking over as the
> replacement.
>
> --
> Go from Idea to Many App Stores Faster with Intel(R)
KSnapShot is being deprecated. KScreenGenie is taking over as the
replacement.
--
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codeba
I use KSnapshot, and it should be able to make a snapshot of an expanded
menu.
You could choose "Window under mouse-pointer" and/or a delay of x
seconds which you use to expand the menu.
Regards
Rolf
Am 25.11.2015 11:19, schrieb Jorge Carrión:
> Hi everybody,
>
> I have to do a manual about a
Hi everybody,
I have to do a manual about a application of mine and it have a lot of
print screen of diferent forms but I can't capture the menu when its
expanded: the PrintScreen key doe'nt work.
Is there a way to capture the Imgage of a form with the menu expanded?
Thanks
-
Le 11/08/2015 05:24, Filippo Casati a écrit :
> how to printer settings remain after viewing the print preview? I want this
> because closing the preview automatically printing.
Do you have a little project that reproduces the bug? And can you
provide information on your system?
Regards,
--
Be
how to printer settings remain after viewing the print preview? I want this
because closing the preview automatically printing.
--
___
Gambas-user mailing list
Gambas-user@lists.s
On Wed, 29 Jul 2015 21:21:09 -0400
"nando" wrote:
> Benoit,
> Perhaps you could provide an example. I find nothing for the correct
> syntax/use.
>
> For example...
>
> Private p As Pointer
>
> Public Struct EmployeeStruct
> FirstName as String
> Age as integer
> End Struct
>
> Public AnE
Print p.Sizeof() 'run-time error
-N
-- Original Message ---
From: "nando"
To: mailing list for gambas users
Sent: Wed, 29 Jul 2015 21:00:10 -0400
Subject: Re: [Gambas-user] Print SizeOf(t) 't is a string
> SWEET!
> Thank you Benoit.
>
SWEET!
Thank you Benoit.
-- Original Message ---
From: Benoît Minisini
To: nand...@nothingsimple.com, mailing list for gambas users
Sent: Wed, 29 Jul 2015 21:37:29 +0200
Subject: Re: [Gambas-user] Print SizeOf(t) 't is a string
> Le 29/07/2015 21:15, nando
Le 29/07/2015 21:15, nando a écrit :
> Thanks guys,
> I was in 'C' mode and needed the size of a structure.
>
> Perhaps, Benoit, sizeof(a string, or a struct) can do exactly that?
> wishing out loud.
>
> Thanks!
> DOH!
> -Nando
If you a pointer to the structure, just use Object.SizeOf() to know it
for gambas users
Sent: Wed, 29 Jul 2015 20:14:32 +0200
Subject: Re: [Gambas-user] Print SizeOf(t) 't is a string
> Le 29/07/2015 20:00, nando a écrit :
> > Dim t As String
> >
> > Print SizeOf(t)
> > Type mismatch: wanted integer, got string instead
> >
>
On Wed, 29 Jul 2015, nando wrote:
> Dim t As String
>
> Print SizeOf(t)
> Type mismatch: wanted integer, got string instead
>
> 'Sizeof also errors on a Stucture
>
> Ubuntu 14.04LTS
> Gambas 3.7.1
>
Do you realise that you were replying to a totally unrelated thread from
July 2013? Create a n
Le 29/07/2015 20:00, nando a écrit :
> Dim t As String
>
> Print SizeOf(t)
> Type mismatch: wanted integer, got string instead
>
> 'Sizeof also errors on a Stucture
>
> Ubuntu 14.04LTS
> Gambas 3.7.1
>
> -Fernando
>
Have you read the documentation of SizeOf()?
--
Benoît Minisini
---
Dim t As String
Print SizeOf(t)
Type mismatch: wanted integer, got string instead
'Sizeof also errors on a Stucture
Ubuntu 14.04LTS
Gambas 3.7.1
-Fernando
--
___
Gambas-user
Hi Paul,
my little program QT_Graphics will work well? Have you tried to see if
the proportions between video, pdf and printing on paper are correct? If
the answers are yes, what prevents you to use 72 as resolution in your
print Sub?
You do not even convert millimeters into inches because th
Correctly ...--- > well
Le 14 oct. 2014 13:59, gambas...@gmail.com a écrit :
Yes configure reset many properties
For labels you can use gb.report too. It manage resolutions correctly.
Le 13 oct. 2014 21:26, "Paul Horechuk" a écrit :
It looks like the problem has been resolved. Keeping the same
Yes configure reset many properties
For labels you can use gb.report too. It manage resolutions correctly.
Le 13 oct. 2014 21:26, "Paul Horechuk" a écrit :
> It looks like the problem has been resolved. Keeping the same resolution
> (100), I just moved the .resolution to just after the .configur
It looks like the problem has been resolved. Keeping the same resolution
(100), I just moved the .resolution to just after the .configure line,
before the printer.begin. This at least fixes the pdf scaling issue and
I'm sure it will fix other printer issues as well.
Thanks to Gian and Benoit.
Thank you for the examples.
It appears we are doing a similar process. You use 72 as the resolution
and with 25.4 mm per inch, you get a factor of 0.352778 (MM_X_PX).
I use 100 for the resolution and use the page dimensions of the page in
inches to get 850 x 1100 for US letter size. If I change
Sorry but for my scarce English I did not understand how did you print
to your HP.
Anyway , I think that if you want to get the same proportions between
what you see on the screen and what you print (with millimeter
accuracy), have to look to compensation factors.
For example with the componen
Thanks. I'll check them out.
On 14-10-10 05:04 AM, Gian wrote:
> Hello Paul,
>
> attached two small demonstrations that might inspire you.
> gianluigi
>
>
>
>> Le 08/10/2014 18:20, Paul Horechuk a écrit :
>>> I have a successful project that formats a sheet of labels on an Avery
>>> form and print
Aparantly, I am trying to draw a the pixel level as I want to precisely
position the contents of each label. I open the printer as a drawng
area, as in:
Public Sub MyPrinter_Begin()
' Only 1 page for now
MyPrinter.Count = 1
MyPrinter.Resolution = 100 ' Set to 100 works great. 300 shrinks
Hello Paul,
attached two small demonstrations that might inspire you.
gianluigi
Le 08/10/2014 18:20, Paul Horechuk a écrit :
I have a successful project that formats a sheet of labels on an Avery
form and prints directly to an HP OfficeJet 7500 E910.
I set the printer width to 850 and lengt
Le 08/10/2014 18:20, Paul Horechuk a écrit :
> I have a successful project that formats a sheet of labels on an Avery
> form and prints directly to an HP OfficeJet 7500 E910.
>
> I set the printer width to 850 and length to 1100 with a resolution of
> 100. These may not be correct for all (PrinterW
I have a successful project that formats a sheet of labels on an Avery
form and prints directly to an HP OfficeJet 7500 E910.
I set the printer width to 850 and length to 1100 with a resolution of
100. These may not be correct for all (PrinterWidth and length are seen
as 216 by 279mm), but by s
That's Great just what i needed too
On 04/02/14 04:05, Fabien Bodard wrote:
> As always you under estimates gb ?
>
> Just name the file with a .pdf as extention.
>
> Printer.filename="Toto.pdf"
>
> Will generate a pdf.
> Le 3 févr. 2014 16:46, "PICCORO McKAY Lenz" a
> écrit :
>
>> i note that g
As always you under estimates gb ?
Just name the file with a .pdf as extention.
Printer.filename="Toto.pdf"
Will generate a pdf.
Le 3 févr. 2014 16:46, "PICCORO McKAY Lenz" a
écrit :
> i note that gambas does not have direct pdf printing support, so i plans to
> use ps2pdf commnd to that!
>
>
i note that gambas does not have direct pdf printing support, so i plans to
use ps2pdf commnd to that!
but my question HOW CAN I WRITE THE REPORT TO POSTSCRIPT?
i i can write te gambas report class result render to a postscript print
file, i can wirte a pdf file converting this with ps2pdf commnd
Hi:
Try wkhtmltopdf, in ubuntu repositories too... If you html code carry on the
Utf-8 esecification it works...
Goog Luck
2010/11/24 charlesg
>
>
> Dimitris Anogiatis wrote:
> >
> > Hey guys,
> >
> > Does htmldoc have any UTF-8 support?
> >
>
> Looking at www.htmldoc.org I don't think there is
Dimitris Anogiatis wrote:
>
> Hey guys,
>
> Does htmldoc have any UTF-8 support?
>
Looking at www.htmldoc.org I don't think there is UTF-8 support. I just use
it for formatting tables.
It is in the Ubuntu repository (sudo apt-get install htmldoc) but I don't
know about other distros.
rgds
-
Hey guys,
Does htmldoc have any UTF-8 support?
Regards,
Dimitrios
On Wed, Nov 24, 2010 at 7:36 AM, Rolf-Werner Eilert <
eilert-sprac...@t-online.de> wrote:
> Am 24.11.2010 13:54, schrieb charlesg:
> >
> > Hi
> >
> >
> > Gregor Burck wrote:
> >>
> >> Can I direct print html?
> >>
> >
> > I shel
Am 24.11.2010 13:54, schrieb charlesg:
>
> Hi
>
>
> Gregor Burck wrote:
>>
>> Can I direct print html?
>>
>
> I shell to htmldoc to turn the html to pdf.
> e.g.
> shll = "htmldoc --bodyfont Sans --fontsize 6.0 --outfile "&
> Application.path& "/tfc.pdf --webpage "& Application.path& "/tfc.htm"
>
Hi
Gregor Burck wrote:
>
> Can I direct print html?
>
I shell to htmldoc to turn the html to pdf.
e.g.
shll = "htmldoc --bodyfont Sans --fontsize 6.0 --outfile " &
Application.path & "/tfc.pdf --webpage " & Application.path & "/tfc.htm"
SHELL shll WAIT
then:
shll = "lpr " & Application.pat
Hi,
I'm still experimenting with printing, the scale method was a good hint for me.
But now a other question:
Can I direct print html?
The background:
I try to improve a application, and I wonder if it is esyer to generate html
instead of print direkt, cause there are elements for layout.
In thi
2010/11/9 Doriano Blengino :
> Fabien Bodard ha scritto:
>> 2010/11/9 Gregor Burck :
>>
>>> Hi,
>>>
>>> when I want to print the units for draw were dots, for the gui I want to
>>> use milimeter.
>>> So I create a function
>>>
>>> public function mmToDots(mm as integer, resolution as integer) as i
> 2010/11/9 Gregor Burck :
> > Hi,
> >
> > when I want to print the units for draw were dots, for the gui I want to
> > use milimeter. So I create a function
> >
> > public function mmToDots(mm as integer, resolution as integer) as integer
> > return Round(mm / 25.4 * resolution)
> > end
> >
>
2010/11/9 Gregor Burck :
> Hi,
>
> when I want to print the units for draw were dots, for the gui I want to use
> milimeter.
> So I create a function
>
> public function mmToDots(mm as integer, resolution as integer) as integer
> return Round(mm / 25.4 * resolution)
> end
>
> And draw e.g. a line
Fabien Bodard ha scritto:
> 2010/11/9 Gregor Burck :
>
>> Hi,
>>
>> when I want to print the units for draw were dots, for the gui I want to use
>> milimeter.
>> So I create a function
>>
>> public function mmToDots(mm as integer, resolution as integer) as integer
>> return Round(mm / 25.4 * r
Hi,
when I want to print the units for draw were dots, for the gui I want to use
milimeter.
So I create a function
public function mmToDots(mm as integer, resolution as integer) as integer
return Round(mm / 25.4 * resolution)
end
And draw e.g. a line with
draw(mmToDots(X,draw.resolution),mmT
Nothing quite that simple but easy enough, try this
SUB PrintForm()
'Prints a form
DIM myformPic AS Picture
DIM size AS INTEGER
myformPic = ME.Grab()
size = 5 '5 times the size otherwise picture is to small.
myformPic = myformPic.Image.Stretch(ME.W * size, ME.H * size).
Hello,
Is there an easy way to print out an entire form? (Like in VB the
Form1.Print).
Thanks,
Robi
--
View this message in context:
http://www.nabble.com/print-tp25709303p25709303.html
Sent from the gambas-user mailing list archive at Nabble.com.
---
I've changed the question, so it will be more understandable:
How can I export the gridview content to a printable format preserving
its structure, colors, etc?
Thanks in advance
Jesús
Jesus Guardon escribió:
> Hi all
>
> Is there a quick method to print out as plain formatted text the conten
Hi all
Is there a quick method to print out as plain formatted text the content
of a populated gridview?
I've been thinking about iterate across all rows and cells, but I wonder
if may have other ways to do that.
Regards
Jesús
---
Thanks for the quick reply Doriano,
I got it working after experimenting a bit with your suggested solutions :)
I tried using a timer but I soon found out that using the LINE INPUT from
within the Process_Read works way better.
Keep rockin :)
Regards,
Dimitris
On Mon, Mar 2, 2009 at 1:48 AM, D
Dimitris Anogiatis ha scritto:
> hey guys
>
> I've read the documentation on Process_Read() but I can't find a way to
> detect
> when the process has stopped and it's waiting for an input; to my
> understanding
> I can provide that input with PRINT #Process, "input" but so far I haven't
> found
> a
hey guys
I've read the documentation on Process_Read() but I can't find a way to
detect
when the process has stopped and it's waiting for an input; to my
understanding
I can provide that input with PRINT #Process, "input" but so far I haven't
found
a full example of how that is done.
can someone
oops!
you'll have to change /home/charles/... as appropriate.
--
View this message in context:
http://www.nabble.com/Print-option-for-files-in-IDE-tp19044250p19046970.html
Sent from the gambas-user mailing list archive at Nabble.com.
--
Hi,
As usual, I cannot solve your problem but here is a simple program which
prints FinePrint/Clickbook type A5 booklets from a Gambas Class file (or any
text file I guess). It is W.I.P. and I am working on colour coding the
words.
It needs htmldoc, psutils and ps2pdf all of which are readily av
Not that one does this very often, but I just wanted to print out one of the
modules to paper, and found seemingly no print button. Yes, can open in
external editor of course, but I thought perhaps a print option could come in
handy.
Regards
Richard
---
50 matches
Mail list logo
