Re: [Gambas-user] How to open new examples in gambas, after finishing with one.

assuming you are using Gambas3: File, Open example -- View this message in context: http://gambas.8142.n7.nabble.com/How-to-open-new-examples-in-gambas-after-finishing-with-one-tp44200p44212.html Sent from the gambas-user mailing list archive at Nabble.com.

[Gambas-user] Gambas 3 in Debian Repository?

I see Gambas 3.1.1 has re-appeared (yet again) in the repository of Xubuntu 12.10 which presumably inherits from Ubuntu which presumably inherits from Debian. Seems ok. Is this (at long last) a working version? -- View this message in context: http://gambas.8142.n7.nabble.com/Gambas-3-in-Debia

Re: [Gambas-user] Puppy on Pi

Hi Gambas on Puppy has been a saga that has run and run and run. The paranoid half of me suspects some kind of official disapproval as Puppy has it's own lobotomised BASIC variant called BaCon. -- View this message in context: http://gambas.8142.n7.nabble.com/Puppy-on-Pi-tp40515p40516.html Se

Re: [Gambas-user] RaspberryPi

Mike Crean wrote: I .. had problems using Ubuntu to put the image on the SD. I had the same problem. It was due to M$ crud on the SD as bought. Blatted it with System Rescue and the image installed fine from Xubuntu. -- View this message in context: http://gambas.8142.n7.nabble.com/Raspberry

Re: [Gambas-user] hsplit.layout settings under gtk

Benoît Minisini wrote > I cannot reproduce any problem, so please give more details : which GTK+ > theme you use, which desktop you use, screenshots... Here is a link to a short video showing the problem. It's short: only 400K ftp://ftp.drivehq.com/charlesg628/PublicFolder/out.ogv

Re: [Gambas-user] hsplit.layout settings under gtk

Hi I have noticed that the effect is not apparent if you close the application from the IDE. I can only get the bug by open from IDE, close from application repeated. rgds -- View this message in context: http://gambas.8142.n7.nabble.com/hsplit-layout-settings-under-gtk-tp40036p40062.html S

Re: [Gambas-user] hsplit.layout settings under gtk

Hi Hi I am not sure that video will get through. Here are two screenshots done by simply run,close,run,close. 1st_run.png 2nd_run.png Each time you run the programme (under

Re: [Gambas-user] hsplit.layout settings under gtk

Hi I am using a fresh install of Xubuntu 12.10 but it also happens on Lubuntu 12.04. [System] OperatingSystem=Linux Kernel=3.5.0-18-generic Architecture=i686 Memory=1805260 kB DistributionVendor=Ubuntu DistributionRelease="Ubuntu 12.10" Desktop=Xfce Language=en_GB.UTF-8 [Gambas 3] Version=3.3.90

Re: [Gambas-user] hsplit.layout settings under gtk

Hi Thks for super-quick reply! Gambas 3.3.90 Under GTK only: If I move the hsplit bar and close the file, then the hsplit is not in the new position when I open the program the next time. It does respond to the change but not accurately. All this works fine under QT rgds -- View this messag

[Gambas-user] hsplit.layout settings under gtk

Hi, The saving of hsplit.layout settings works fine under qt4 but give imprecise results under gtk. Gambas 3.3.9. various 32bit OS. tSplitLayout-0.0.1.tar rgds -- View this message in context: http://gambas.8142.n7.nabbl

Re: [Gambas-user] Printer code request

Here is a revised version of the Barcode example http://old.nabble.com/file/p34612204/BarcodeGambas3-0.0.4.tar BarcodeGambas3-0.0.4.tar Benoît Minisini wrote: > > Le 11/08/2012 11:58, charlesg a écrit : >> >> >> Benoît Minisini wrote: >>> >>>

Re: [Gambas-user] Writing an article about Gambas 3.3

Benoît Minisini wrote: > > Does anyone know the best places where that article should be submitted? > Muktware is normally an interesting read. Can I offer any help with translation? -- View this message in context: http://old.nabble.com/Writing-an-article-about-Gambas-3.3-tp34567096p34

Re: [Gambas-user] Gambas3 Can't see the project files

Choperhead wrote: > > .. but when I open the project folder there is empty (the form files etc. > not are there) > Many Gambas3 files (including source files) are hidden. In Nautilus (the file manager) you can display them with ctrl-H. It might be safer to make a source archive (Project, Make

Re: [Gambas-user] Printer code request

Jussi Lahtinen wrote: > > Hints... > > ((Key["n"] Or Key["N"]) And Key.Alt) > > Here "Or" and "And" are bitwise operators. > AAHH! Thanks. I will correct. -- View this message in context: http://old.nabble.com/Printer-code-request-tp34282837p34285575.html Sent from the gambas-user maili

Re: [Gambas-user] Printer code request

Benoît Minisini wrote: > > I don't remember. When? > Your file is unreadable. Please join it to your post as a normal > attachment. > It was a long time ago. Maybe Jun 2011. Search on Mailing list says it has been deleted. I seem to remember you found fault with something. Perhaps you expected

Re: [Gambas-user] Printer code request

Jussi Lahtinen wrote: > > See Barcode example for how to send things to printer. > My barcode example only printed from Gambas2. I did submit a Gambas3 version to the mailing list that did print from Gambas 3 but it never made it into the source repository. I see the source version of the ba

[Gambas-user] Distribution availability: it's gets better!

Gambas 3.2.1 has appeared in Lubuntu 12.04 repository. Hopefully that means Ubuntu as well. -- View this message in context: http://old.nabble.com/Distribution-availability%3A-it%27s-gets-better%21-tp34223758p34223758.html Sent from the gambas-user mailing list archive at Nabble.com. -

[Gambas-user] Distribution availability: progress at last

Very nice to see that Mageia 2 has Gambas 3.1.1 in its software repository. Distrowatch (not that it is definitive) has Mageia as second most popular over the last three months and ahead of Ubuntu. -- View this message in context: http://old.nabble.com/Distribution-availability%3A-progress-at-l

Re: [Gambas-user] Gambas 3 runs on Raspberry Pi

Benoît Minisini wrote: > > But it works, and it's cool. :-) > I sent Raspberry Pi the screendump and had the following reply from Eben Upton: "Oh, very cool. We'll try to help you guys jump the queue for some units when we get the next batch in." Fingers crossed. -- View this message in con

Re: [Gambas-user] Issue 242 in gambas: Gamba forms fail on Debian ARM

charlesg wrote: > > I have emailed Raspberry Pi to see if they have any development kits. > I have received a very polite reply from Eben Upton telling me to join the queue! Thinking about it, I suspect the ex-Director of Computer Science, St John's College, Cambridge would pr

Re: [Gambas-user] Issue 242 in gambas: Gamba forms fail on Debian ARM

Fabien Bodard-4 wrote: > > but how to get one of these machines? > I have emailed Raspberry Pi to see if they have any development kits. Standing in RS Components or Premier Farnell queue would I fear take forever. -- View this message in context: http://old.nabble.com/Issue-242-in-gambas

Re: [Gambas-user] Issue 242 in gambas: Gamba forms fail on Debian ARM

kevinfishburne wrote: > > I just tested gb3's memory consumption with the world > generator for my game it it uses about 70 MB of RAM just to load the > project. > Gambas apps may not consume RAM but I seem to remember that Gambas itself will not compile an app if the m/c does not have 384M

Re: [Gambas-user] Issue 242 in gambas: Gamba forms fail on Debian ARM

gambas-4 wrote: > > Alas I don't have any ARM architecture where I could debug Gambas. > Hmm... 256Mb RAM. I guess that might be a killer. -- View this message in context: http://old.nabble.com/Issue-242-in-gambas%3A-Gamba-forms-fail-on-Debian-ARM-tp33737503p33739442.html Sent from the gamb

Re: [Gambas-user] Issue 242 in gambas: Gamba forms fail on Debian ARM

gambas-4 wrote: > > Status: New > New issue 242 by tvijlbr...@gmail.com: Gamba forms fail on Debian ARM > It's early days (you're lucky if you can actually get hold of a Raspberry Pi) but I think a Pi with functional Gambas would have an enormous effect on the perception and acceptance of Gamb

Re: [Gambas-user] Installing Gambas3 - /.reconf-all not found

Bill-Lancaster wrote: > > I have a clean hard drive with fresh install of Ubuntu 12.04 > Am following instructions from > http://kalaharix.wordpress.com/gambas-3/gambas-3-compile-and-install/ > Everything is fine until "./reconf-all" when I get "bash: ./reconf-all: No > such file or directory" >

Re: [Gambas-user] Installing Gambas 3 fails

Sorry you are right: that is confusing and I am taliking about the svn download. When you extracted the tarball you put it in a directory as in "It does not matter where you place the extracted directory: it is easiest to leave it as a sub-directory in the Downloads directory." Delete that directo

Re: [Gambas-user] Installing Gambas 3 fails

My experience after a compilation failure is to delete trunk and start over. I am sure it is not essential but I am convinced there are black arts at work :) Bill-Lancaster wrote: > > Thanks for the help. That set of commands runs fine, but > I then ran "reconf all" - fine > Then "./confi

Re: [Gambas-user] Installing Gambas 3 fails

Hi Bill-Lancaster wrote: > > I'm following instructions found at > http://kalaharix.wordpress.com/gambas-3/gambas-3-compile-and-install/ > > "Package kdelibs4-dev is not available, but is referred to by another > package. > This may mean that the package is missing, has been obsoleted, or > is

Re: [Gambas-user] Issue 211 in gambas: Gridview multiselect

works great. Thank you. gambas-4 wrote: > > Updates: > Status: Fixed > > Comment #3 on issue 211 by benoit.m...@gmail.com: Gridview multiselect > http://code.google.com/p/gambas/issues/detail?id=211 > > You can use Text inside of Title. I will add the Title synonymous anyway, > to ke

Re: [Gambas-user] Issue 211 in gambas: Gridview multiselect

Gridview multiselect ver 4522, lubuntu 11.10 32bit 1) Now works consistently GTK/QT. 2) ctrl-click adds correctly. click new line removes previous selection. All OK 3) select line then shift-click another does not add block on either gtk/qt thanks gambas-4 wrote: > > Updates: > Status:

Re: [Gambas-user] Issue 211 in gambas: Gridview multiselect

gambas-4 wrote: > > 1) Describe the problem. > i cant deselect a row when multiple row are selected > Hi I have an application with the same problem and have been trying to de-construct it to get to the essence. It first occured in Gambas2 and transferred to Gambas3 with the auto convert. I

Re: [Gambas-user] TAB on keyboard

Willy Raets wrote: > > Is there a way in Gambas2 (or Gambas3), when using TAB-key on keyboard > to have it skip (in my case all read only) controls and just go to those > that matter for input? > 2 workarounds: firstly: > Public Sub TextBox3_GotFocus() > TextBox1.SetFocus > End > secondl

Re: [Gambas-user] Moving a modal child window

Benoît Minisini wrote: > >> I am trying to position a modal child window relative to its parent. When >> I >> put 'me.top = FMain.top + 20' in the _Open class of the child, it works >> with GTK but not QT (where the child window opens centered). > > That bug should be fixed in revision #4043. >

Re: [Gambas-user] Gambas Cloud

Andrea Bertini wrote: > > Gui-frontend on desktop made with Gambas, database sqlite on the cloud: > is it actually possible? > SQLite is single-user update but multi-user read. You don't say whether you (alone) are trying to share a database (e.g. home and work) or whether lots of different us

[Gambas-user] Moving a modal child window

Hi I am trying to position a modal child window relative to its parent. When I put 'me.top = FMain.top + 20' in the _Open class of the child, it works with GTK but not QT (where the child window opens centered). I can get the child window to move correctly in both GTK and QT by using a 1msec tim

Re: [Gambas-user] HSPlit problem

Hi Dag-Jarle Johansen wrote: > > How can I set the position of the split > hsplit1.Layout = [100, 200] -- View this message in context: http://old.nabble.com/HSPlit-problem-tp32272420p32272651.html Sent from the gambas-user mailing list archive at Nabble.com.

Re: [Gambas-user] Help me ....... with Gambas2 and SQlite3

"Muñoz Palominos, César Augusto" wrote: > > How I can insert a CSV (comma-separated values) file into Sqlite3 > database in Gambas2 program? > Here is an example. It won't be directly applicable to you but will give pointers. In constructing the CSV, I used "^" as a separator. If you inh

[Gambas-user] Gambas 3 book

It see on the Ubuntu forum that Dr Rittinghouse has updated his Gambas book with Jon Nicholson (http://beginnersguidetogambas.com/) now 'revised for Gambas 3'. This is brilliant news! -- View this message in context: http://old.nabble.com/Gambas-3-book-tp32005062p32005062.html Sent from the gam

Re: [Gambas-user] Barcode example for Gambas3

Pino Zollo wrote: > > FMain.printer_Draw.49: FMain.printer_Draw.47Type mismatch: wanted > Float, got Null instead > I am hoping the following will allow for comma decimals (would be grateful if you could check) : ftp://ftp.drivehq.com/charlesg628/publicfolder/BarcodeG3-0.0.5.tar.gz Barcod

Re: [Gambas-user] Barcode example for Gambas3

shordi wrote: > > I can't open the file > Shordi Hmm.. I don't have a problem (ub10.10 32bit) but have had this in the past. Bit odd as I am just using the 'project,make,source archive' from within G3. Could you try 'gunzip BarcodeG3-0.0.4.tar.gz' from a terminal and work from the tar fi

[Gambas-user] Barcode example for Gambas3

I posted this on gambas-devel but don't know if it got through. I was not registered on that list. It is an update on the barcode example for Gambas3. http://old.nabble.com/file/p31776060/BarcodeG3-0.0.4.tar.gz BarcodeG3-0.0.4.tar.gz -- View this message in context: http://old.nabble.com/Barc

Re: [Gambas-user] How can I print my Gambas program code?

Wilson Pedro Tamega Junior wrote: > >I need to print out the code of my program to keep a hard copy of it, > Here is a little Gambas2 program that I wrote a few years ago to print Gambas files. I did intend to colour code the output but never got around to it. It produces A5 folded bookle

Re: [Gambas-user] 2 Forms on one form!

Baris Bicer wrote: > > When clicking one button the form will be shown on the same form using > panels etc.Is it possible? > Most objects have a visible property. You can, for example, layer panels on a form (one on top of the other) and control the visible property from a button. Here's an ex

Re: [Gambas-user] gb3 - unable to load Qt translation

Hi, Wally-8 wrote: > > on run a project in gambas3 i always get: > "warning: unable to load Qt translation: en_US.UTF-8" > I can confirm the error message (but in my case with en_GB.UTF-8). 32bit UBuntu 10.10, Gamrev 3338 -- View this message in context: http://old.nabble.com/gb3---unable-

Re: [Gambas-user] Print html direct?

Dimitris Anogiatis wrote: > > Hey guys, > > Does htmldoc have any UTF-8 support? > Looking at www.htmldoc.org I don't think there is UTF-8 support. I just use it for formatting tables. It is in the Ubuntu repository (sudo apt-get install htmldoc) but I don't know about other distros. rgds -

Re: [Gambas-user] Print html direct?

Hi Gregor Burck wrote: > > Can I direct print html? > I shell to htmldoc to turn the html to pdf. e.g. shll = "htmldoc --bodyfont Sans --fontsize 6.0 --outfile " & Application.path & "/tfc.pdf --webpage " & Application.path & "/tfc.htm" SHELL shll WAIT then: shll = "lpr " & Application.pat

Re: [Gambas-user] Beep?

Just as well! I just tested my version and it doesn't work anyway. :,( 'echo -e \\007' does work from terminal. Benoît Minisini wrote: > >> SHELL "echo -e \"\\007\" >/dev/tty10" >> >> I think I got that from this forum. >> >> bbb888 wrote: >> > Pretty simple? >> > >> > How can I make the

Re: [Gambas-user] Beep?

SHELL "echo -e \"\\007\" >/dev/tty10" I think I got that from this forum. bbb888 wrote: > > Pretty simple? > > How can I make the computer go "beep" > -- View this message in context: http://old.nabble.com/Beep--tp29997205p29998294.html Sent from the gambas-user mailing list archive at

Re: [Gambas-user] Barcode reader

I have Metrologic and Symbol scanners working with 'keyboard wedge' interface. Needs a computer with ps2 keyboard socket though. Connect scanner to keyboard port, keyboard to scanner and computer can't tell the difference. minthaka wrote: > > Is it possible to use Gambas2 (or 3) together with a

Re: [Gambas-user] [ASK] How to sort Gridview?

Use columnclick event, clear gridview, sort data, redisplay. Use data event if you have thousands of data. > PUBLIC SUB Form_Open() > GridView1.columns.count = 2 > END > > PUBLIC SUB GridView1_ColumnClick(colm AS Integer) > PRINT Colm > END > rportnoy wrote: > > Hey bro, how could I or

Re: [Gambas-user] installation error in ubuntu

You don't say what version Ubuntu. I can't see a reason to compile an old version of Gambas (2.18). Just enter: sudo apt-get install gambas2 from terminal. Do not add from Ubuntu repository ( e.g. 'Add/Remove' on 8.04). The repository versions tend to be incomplete. btw New Ubuntu Maverick (10.

Re: [Gambas-user] Using Open in Gambas 3

Fabien Bodard-4 wrote: > > this is new since gb2 > Not sure about that. The following works even back to 2.13 DIM j AS Integer = 0 INC Application.busy hFileOut = OPEN "/home/charles/rba/rba.csv" FOR CREATE sql = "select * from stmaster" res = mdFile.$hConnStock.Exec(sql) FOR

Re: [Gambas-user] Using Open in Gambas 3

craf wrote: > > > In Gambas 3 can not be used and must be assigned to hfile: > > Dim hFile As File > Dim line As String > > hFile = Open "text" For Read > > While Not Eof(hFile) > Line Input #hfile, line > Print linea

Re: [Gambas-user] Change Gridview.mode programmatically

charlesg wrote: > > I can change a gridview with mode = multiple to single with: > ' > Public Sub radbutSingle_Click() > GridView1.mode = 1 > End > ' > and it works but I cannot do it the other way r

[Gambas-user] Change Gridview.mode programmatically

Hi I can change a gridview with mode = multiple to single with: ' Public Sub radbutSingle_Click() GridView1.mode = 1 End ' and it works but I cannot do it the other way round. i.e. if the mode is single then: '

Re: [Gambas-user] Gambas3:draw.begin(printer)

Thanks Fabien for your reply. After much struggle I still cannot get a result and include the following for the amusement of all. :) prnter is not aware of events begin and draw. Rsult is T and thus a failure. The program does spit an empty sheet from the printer. If someone could correct the cod

[Gambas-user] Gambas3:draw.begin(printer)

Hi Converting Gambas2 to Gambas3 using QT. draw.begin(printer) now says that printer is 'not a drawable object' printer.name reports correctly. Grateful any help or pointer to the documentation I can't find! rgds -- View this message in context: http://old.nabble.com/Gambas3%3Adraw.begin%2

Re: [Gambas-user] Ubuntu 10.04 LTS

Hi Gambas 2.19.0 is in UB10.04 software centre but last time I tried it gave an incomplete installation. If you don't want to compile rather do sudo apt-get install gambas2 from the terminal and even then check in synaptic by searching on gambas and making sure all the boxes are ticked. rgds --

Re: [Gambas-user] Ubuntu 10.04 LTS

Hi Gambas 2.20.2 works fine on a raw install (i.e. not upgraded) 10.04 using Karmic (9.10) dependency list. I think there is a problem with Gambas 3 but am sure it will be sorted soon (as ever!) rgds -- View this message in context: http://old.nabble.com/Ubuntu-10.04-LTS-tp28412230p28412886.

Re: [Gambas-user] Cannot load class 'Balloon'

Hi I fixed the balloon error by loading Ubuntu package intltool (don't know the Arch equivalent). Now it loads but still does not run so there must be other unsatisfied dependencies. Somebody on the Ubuntu forum has got it working (Gambas 2.99 on ub10.04 64bit) but has not spilled the beans yet.

Re: [Gambas-user] Cannot load class 'Balloon'

Fabien Thank you for that. Gambas 3 used to compile on Ubuntu 10.04 (lucid) using the list of dependencies for 9.10 (Karmic) in the Gambas installation pages. It now also needs intltool (or part of it?) as in sudo apt-get install intltool. Gambas 3 now runs but looks odd. I am way out of my comf

[Gambas-user] Cannot load class 'Balloon'

hi, Gambas3 2918 compiles fine on Ubuntu 10.04 32bit release candidate. But gives: ERROR: #2: Cannot load class 'Balloon': Unable to load class file when run. any ideas? rgds -- View this message in context: http://old.nabble.com/Cannot-load-class-%27Balloon%27-tp28375384p28375384.html Sent

Re: [Gambas-user] Currency and addition/subtraction

Hi, I guess the simple answer is: fTotal += Val(tblView[row, column].text) However, you will eventually run into rounding errors. there was quite a lengthy thread not long ago about this. The conclusion (if such a thing can be reached on a forum :-)) was that currency should be worked on as inte

Re: [Gambas-user] Gambas 2.19 on Ubuntu 10.04 Alpha 3 [Lucid Lynx]

Hi Its the same old saga of incomplete Ubuntu repository installation. You have to go to Synaptic, search on Gambas and install the missing components. I have already left a post on the Lucid development section of the Ubuntu forum to try and sort this out before final release. So far no respons

Re: [Gambas-user] What are the {} enclosed variables

Hi The ghostwriters have been a bit ephemeral. How about a simple: To use a property name that is also a Gambas reserved name in your personal class, you must enclose the property name within {}. For example: Property Font as Font Property Left as Integer will both cause a compile error. Pro

Re: [Gambas-user] Text box event triggered by

Hi I use this: > '- > PUBLIC SUB txtBarcode_KeyPress() > IF InStr("1234567890", key.text) = 0 THEN > STOP EVENT > ENDIF > END > '- > PUBLIC SUB txtBarcode_KeyRelease() >

Re: [Gambas-user] Help files

Hi, I recommend you try compiling Gambas 2.19 from source. It seems a bit involved for the first few times but you soon get the hang of it. The advantage is that it gives the people on the forum a base line for their assistance. The Ubuntu versions of Gambas are created without care. rgds --

Re: [Gambas-user] database

Hi Why not something like: SHELL "mysql -u root stock < /home/charles/mySQLbackup/stockDump.sql" WAIT you could also specify a remote server. where stockDump.sql was created by mysqldump. rgds -- View this message in context: http://old.nabble.com/database-tp27723478p27724208.html Sent from t

Re: [Gambas-user] New Gambas Install missing parts

Hi What Linux distro? What version Gambas? If you installed from Ubuntu repository, Go into Synaptic, search on Gambas and install missing components. The dang repository version is incomplete. rgds -- View this message in context: http://old.nabble.com/New-Gambas-Install-missing-parts-tp2771

[Gambas-user] Does the mailing list work?

Hi I have often been a bit paranoid about this mailing list. Using http://old.nabble.com/Gambas-f3425.html, I find a post by Caveat replying to tobiasboe whose original post I can't see. However when I look at http://www.mail-archive.com/gambas-user@lists.sourceforge.net/index.html#08446, I can s

Re: [Gambas-user] Setting default values on a listbox

Hi I read the question differently from Werner (probably incorrectly!) I think you want: PUBLIC SUB Form_Open() DIM j AS Integer FOR j = 40 TO 50 ListBox1.Add(Str(j) & " " & Chr(j), j) NEXT ListBox1[5].selected = TRUE END -- View this message in context: http://old.nabble

Re: [Gambas-user] How to change a picture when a key is pressed ?

Hi I don't mess around with pictures much so this may be the blind leading the blind. The command is: PictureBox1.Picture = Picture.Load("/home/charles/Photos/SV45.JPG") I could not get a response to a PictureBox1_keypress event so I buried a textbox behind the picturebox, made sure it had

Re: [Gambas-user] Type of Variables possible?

Hi Project, Options, "Module symbols are public by default"=yes ? rgds -- View this message in context: http://old.nabble.com/Type-of-Variables-possible--tp26938813p26951829.html Sent from the gambas-user mailing list archive at Nabble.com. ---

Re: [Gambas-user] MySQL access example

Hi I don't think Gambas is too particular where it reads the mySQL server. If you mean remote on network (not remote on internet) then the following (for Ubuntu) might help. Set router to use fixed addresses or at least ensure that the mySQL server boots first to always use same address. on se

Re: [Gambas-user] Make Installation Package Failure

The package on Ubuntu is annoyingly incomplete. Go into Synaptic, search on Gambas and install the rest of what should have been in the package. Even better compile Gambas from source although 2.13 is fine for testing. rgds -- View this message in context: http://old.nabble.com/Make-Installati

Re: [Gambas-user] does this work (test)

I have got the impression over the last few days that nabble is having one of its periodic hiccups. I see that the http is now 'old.nabble.com'. Is there a 'new.nabble.com'? rgds -- View this message in context: http://old.nabble.com/does-this-work-%28test%29-tp26254121p26262017.html Sent from

Re: [Gambas-user] set of questions

Doriano While you are busy dumping on yourself, let me join in: you are wrong. 1) You are wrong that you do not have a good command of the English language. I have often marvelled (in that vaguely condescending British sort of a way :)) how good your (in particular) and every contributors (in ge

Re: [Gambas-user] set of questions

Hopefully this answers question 2. It is a distillation of the database example that comes with Gambas: You just need a gridview, a button called btnRun and a preferably large database with lots of columns so that you can scroll around with ease '=

Re: [Gambas-user] How to sent a line line to a lp1 printer and form to lp0 printer directly.

Hi, I tried printing line-by-line directly to the raw device and got into awful overlapping (? buffering) problems. I think you would be far better to create a single line text file each time and then print it with (for example): SHELL "cat /home/charles/tilRcpt>/dev/lp0" It's blindingly quick

Re: [Gambas-user] Pass parameter to Gambas prog.

Thanks to all. Just what I want. rgds -- View this message in context: http://www.nabble.com/Pass-parameter-to-Gambas-prog.-tp25002337p25005719.html Sent from the gambas-user mailing list archive at Nabble.com. -- Let

[Gambas-user] Pass parameter to Gambas prog.

Hi all, Can I pass a parameter to a Gambas program? e.g myprog.gambas parm1 How do I read the parameter? Any help gratefully received. rgds -- View this message in context: http://www.nabble.com/Pass-parameter-to-Gambas-prog.-tp25002337p25002337.html Sent from the gambas-user mailing list arc

Re: [Gambas-user] Gridview not moving to last line in Gambas 3

I noticed that the subsequent addition of a line to the gridview caused it to display correctly. Also a second Gridview on the form behaved itself from _open. So I moved the routine to display the problem gridview from form_open to form_activate and it now works correctly. -- View this messag

[Gambas-user] Gridview not moving to last line in Gambas 3

The following code works fine in 2.13 on Ubuntu 9.04 i386 and correctly dispays the last line of the result in gridview gvAll On 2.99 2224, however, the last line is not displayed or not fully displayed. You have to scroll to show the last line. I thought it might have something to do with the he

Re: [Gambas-user] Moving things

Hi Quick? Easy? Depends on where you are looking from :) '-- PUBLIC SUB btnExit_KeyPress() SELECT CASE Key.Code CASE Key.Up btnExit.y = btnExit.y - 10 CASE Key.Down btnExit.y = btnExit.Y + 10 END SELECT END '

Re: [Gambas-user] Database example

Hi Thank you Ron for that. A bit more messing around and I think I now understand it. Following on from richard terry's suggestion for simple examples, here it is as simple as I can get it. There is nothing new here: it all comes from the database example. Any corrections to the annotations welc

[Gambas-user] Database example

Hi, I have extracted what I need from the database example. I can even get it to do exactly what I want. But, in truth, I do not understand how it works exactly. '=== ' FMain.class PUBLIC $hConnLocl AS NEW Connection PUBLIC $resData AS Result '-

Re: [Gambas-user] clipboard

Hi, Clipboard.Copy(txtItem.text) rgds -- View this message in context: http://www.nabble.com/clipboard-tp23920689p23921133.html Sent from the gambas-user mailing list archive at Nabble.com. -- OpenSolaris 2009.06 is

Re: [Gambas-user] MySQL database interaction tutorial

Hi, Not strictly an answer to your question :) but have you seen the how to... at http://gambasdoc.org/help/ rgds -- Register Now for Creativity and Technology (CaT), June 3rd, NYC. CaT is a gathering of tech-side dev

Re: [Gambas-user] gb.net componet

Hi, It really helps to know your Gambas version and Linux distribution version. Do you mean install or use? To use gb.net: Go into your project then Project, properties, components and click on gb.net. Check this first. If gb.net is not an option in the list then you will have to install it for

Re: [Gambas-user] Startup problems

I don't think you answered Diego's questions? The last time I installed Gambas 2.8 from Applications, Add/Remove in Ubuntu 9.04, the installation was incomplete and I had to go into Synaptic (system, administration, synaptic), do a search on Gambas and install the all related packages. rgds --

Re: [Gambas-user] Looking for a little help with an app.

Hi I also have this problem quite often :( unzip the file first with: gunzip sales-0.0.1.tar.gz and then extract it with a dble-click rgds -- View this message in context: http://www.nabble.com/Looking-for-a-little-help-with-an-app.-tp23480295p23484102.html Sent from the gambas-user mailing l

Re: [Gambas-user] Re port for Gambas

Hi I think Laurux uses Kugar? There are also references here and elsewhere to using unzip on a template created in Open Office spreadsheet, changing the values in the xml and re-zipping back to .ods. rgds -- View this message in context: http://www.nabble.com/Report-for-Gambas-tp23442269p2345

Re: [Gambas-user] sqlite integer to text string problem

Hi, SQLite is a bit unusual. As the FAQ at www.sqlite.org says, the field type is is one of expectation rather than definition (with the exception of an integer primary key). This is demonstrated in your example where you have put real numbers (0.64) into an integer field. SQLite doesn't care: it

Re: [Gambas-user] I need a shell script

Hi I sometimes have this problem. It works if you gunzip it first to a tar file. rgds -- View this message in context: http://www.nabble.com/I-need-a-shell-script-tp23248632p23254597.html Sent from the gambas-user mailing list archive at Nabble.com. --

Re: [Gambas-user] gridview

Hi Have you changed the mode property to single (allows one line to be selected) or multiple? rgds -- View this message in context: http://www.nabble.com/gridview-tp23252958p23254524.html Sent from the gambas-user mailing list archive at Nabble.com. --

Re: [Gambas-user] Error on Jaunty

Hi, I have experienced this some time ago and it was not on ub904. I have set your code on ub904 with built-in gam2.8 and confirm the error 11. BUT, the fix is the same as it was in my case: get rid of the menu bar and it compiles. Just don't ask me what it means :) rgds -- View this message

Re: [Gambas-user] Libtool & Ubuntu Jaunty

Hi, Well I don't know if it is because I only use 386 Ubuntu, but I do not have a problem (or maybe the problem is too subtle for me to notice). I have a pile of old 20Gb Hard disks to mess around on (currently ST4.00 USD6.00 each!) and have Gam2.11 quite happy on UB810 on Athlon64 without any l

Re: [Gambas-user] Gridview select and deselect

Stefano, Yes, thanks for that. I am sure I can make it work. rgds -- View this message in context: http://www.nabble.com/Gridview-select-and-deselect-tp23098365p23102420.html Sent from the gambas-user mailing list archive at Nabble.com. ---

[Gambas-user] Gridview select and deselect

Hi all Having selected a gridview row with a click, I cannot deselect it with another click as should be normal. After reading an old thread here, I have fudged it with an array bSelected which keeps track of which rows in gvRequired are selected. '--

Re: [Gambas-user] We should offer online Gambas courses!

Hi all, As one of the great unwashed (i.e. less proficient) Gambas users, I must say that I prefer Richards approach using annotated code examples at a simple level. I don't really feel comfortable with the idea of a paid-for tutorial system and feel that 'we' as a user base should freely contrib

  1   2   >