'm not positive
>> when) has made a change that is causing the pcm device to play
>> sounds a tone or so too fast. The device probs in the kernel as:
>>
>> pcm0: port 0xbc40-0xbc7f,0xb800-0xb8ff mem
>> 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31
or so too fast. The device probs in the kernel as:
>
> pcm0: port 0xbc40-0xbc7f,0xb800-0xb8ff mem
> 0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
> pcm0:
>
> and it definately didn't have this behaviour in 5.1-RELEASE.
Does it do this
It's my perception that some recent current (and I'm not positive
when) has made a change that is causing the pcm device to play sounds
a tone or so too fast. The device probs in the kernel as:
pcm0: port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf4fff4ff,0xf4fff800-0xf4fff9ff
On Fri, Jan 03, 2003 at 04:22:28AM -0700, Scott Long wrote:
> Christian Brueffer wrote:
>
> >
> >
> >Well, it's not only maestro hardware:
> >
> >pcm0: port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at
> >device 3
> >1.5 on pci0
> >
> >T
Christian Brueffer wrote:
Well, it's not only maestro hardware:
pcm0: port 0x18c0-0x18ff,0x1c00-0x1cff irq 11 at
device 3
1.5 on pci0
The same with a CMI8738.
I don't have any boards with these chips, but if it helps, I can give
you full root access on one of the machines.
-
hardware as a PCI add-in board and is willing to loan it to me, I'd
> be very grateful.
>
> Another thing to try would be to edit the driver source and reduce it's play
> channels to 1 by changing M3_PCHANS. This wouldn't fix the problem, but
> in the past the dri
[EMAIL PROTECTED] wrote:
Quoting Christian Brueffer :
|
| Hi,
|
| I'm seeing the same on two boxen here. The errors seem to have been
| introduced during the latest pcm locking changes in mid-december.
|
| A src/dev/sound from the beginning of december works fine.
Christian,
Thanks.
Quoting Christian Brueffer <[EMAIL PROTECTED]>:
|
| Hi,
|
| I'm seeing the same on two boxen here. The errors seem to have been
| introduced during the latest pcm locking changes in mid-december.
|
| A src/dev/sound from the beginning of december works fine.
Christian,
Thanks. At le
Quoting Vladimir <[EMAIL PROTECTED]>:
| On Thu, Jan 02, 2003 at 07:47:33AM -0800, [EMAIL PROTECTED] wrote:
| > Since sometime around Christmas I noticed that sound no longer worked
| > wiith my new kernels from new worlds. I can go back to a pre-Christmas
| > kernel and it works fine. I thou
/boot/kernel/snd_pcm.ko" at 0xc042b170.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc042b21c.
>
> and
>
> pci0: at device 9.1 (no driver attached)
> pcm0: port 0x1800-0x18ff irq 5 at device 10.0 on pci0
>
> Then trying to play an mp3 I get
> p
On Thu, Jan 02, 2003 at 07:47:33AM -0800, [EMAIL PROTECTED] wrote:
Since sometime around Christmas I noticed that sound no longer worked
wiith my new kernels from new worlds. I can go back to a pre-Christmas
kernel and it works fine. I thought I might have done something or that
it would work it
gt; what I might do to get it working again?
| >
| > Then trying to play an mp3 I get
| > pcm0:play:0: play interrupt timeout, channel dead
|
| I get this on -STABLE if I'm playing an mp3, suspend the laptop, then
| resume it. If I kill and restart mpg123, it starts playing f
self out. I haven't found what I might have done wrong
> and it hasn't worked itself out so I wonder if there is anyone else having
> issues with maestro3 or similar sound problems? Are there any ideas for
> what I might do to get it working again?
>
> Then trying to
at 0xc042b000.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc042b0bc.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc042b170.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc042b21c.
and
pci0: at device 9.1 (no driver attached)
pcm0: port 0x1800-0
Try to dig in BIOS settings and set IRQ 5 (and DRQ 1 if such
tuning possible) to ISA manually.
> Form a -CURRENT of yesterday:
>
> flag@newluxor$ cat /dev/sndstat
> FreeBSD Audio Driver (newpcm)
> Installed devices:
> pcm0: at io 0x220 irq 5 drq 1 bufsz 4096d (1p/1r/0v
Form a -CURRENT of yesterday:
flag@newluxor$ cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: at io 0x220 irq 5 drq 1 bufsz 4096d (1p/1r/0v c
hannels duplex default)
flag@newluxor$
but when i try to play any song i get this msg:
cm0:play:0: play interrupt timeout
-CURRENT #0: Fri Nov 29
21:25:40 GMT 2002 root@:/usr/obj/usr/src/sys/GENERIC i386
Upon booting the following messages are displayed:
pcm0: port 0xc800-0xc8ff mem
0xf9ffe000-0xf9ff irq 5 at device 8.0 on pci0
/usr/src/sys/vm/uma_core.c:1330: could sleep with "pcm0:mixer" locked
fro
Our pcm maintainer is aware of this problem, and is working on the
solution. It's expected before 5.0-Release.
HTH,
Doug
--
"We have known freedom's price. We have shown freedom's power.
And in this great conflict, ... we will see freedom's victory."
- George W. Bush, Presiden
> >
> > [...]
> >
> > Anyone knows why / what to do ?
> >
> > -- Aurélien
>
> It does the same thing on my machine, but sound still works :)
>
> I don't know how to fix it...I look forward to somebody hopefully
> enlightening us :)
>
> Bon FreeBSD,
>
> Mike
Yep, sound still works but the bo
Hi,
I've enabled sound using "device pcm". Now at boot and each time I'm trying to
play a sound I got a lot of messages like:
pcm0: port 0x1430-0x1433,0x1434-0x1437,0x1000-0x10ff irq 9 at de
vice 7.5 on pci0
../../../vm/uma_core.c:1311: could sleep with "pcm0" l
a_core.c:1311: could sleep with "pcm0:record:0" locked from
/usr/src/sys/dev/sound/pcm/sound.c:191
edgemaster# echo "hello" >/dev/audio
edgemaster# dmesg | tail -1
/usr/src/sys/vm/uma_core.c:1311: could sleep with "pcm0:play:1" locked from
/usr/src/sys/dev/s
/-- Jun Kuriyama wrote:
| At Sun, 18 Aug 2002 07:17:07 -0700 (PDT),
| Orion Hodson wrote:
| > Modified files:
| > sys/dev/sound/pcmdsp.c
| > Log:
| > Apply reference counting patch. Fixes problem of two applications
| > opening the device, eg one read only and one write only, and
ce count being non-zero when both exit rendering device
> permanently busy.
After this, I got a panic around sound. With r1.54 of dsp.c, it looks
fine.
panic: mutex pcm0:play:0 not owned at ../../../kern/kern_mutex.c:339
panic: from debugger
panic messages:
---
dmesg: kernel message buffe
On Sat, 08 Jun 2002 04:03:40 -0700 (PDT)
Hiten Pandya <[EMAIL PROTECTED]> wrote:
> --- Juan Francisco Rodriguez Hervella <[EMAIL PROTECTED]> wrote:
> > ../vm/uma_core.c:1160
> > ../../../vm/uma_core.c:1327: could sleep with "process lock" locked
from> > ../../../kern/kern_prot.c:511
> > ../../../
--- Juan Francisco Rodriguez Hervella <[EMAIL PROTECTED]> wrote:
> ../vm/uma_core.c:1160
> ../../../vm/uma_core.c:1327: could sleep with "process lock" locked from
> ../../../kern/kern_prot.c:511
> ../../../vm/uma_core.c:1327: could sleep with "process lock" locked from
> Hope this help. Do you t
"process lock" locked from
../../../kern/kern_prot.c:613
../../../vm/uma_core.c:1327: could sleep with "UMA lock" locked from
../../../vm/uma_core.c:1160
../../../vm/uma_core.c:1327: could sleep with "pcm0:play:0" locked from
../../../dev/sound/pcm/sound.c:191
.
>
> I got this message (after fifo fix kernel):
>
> May 21 13:54:35 waterblue kernel: ../../../vm/uma_core.c:1324: could sleep wi
th "pcm0:play:0" locked from ../../../dev/sound/pcm/dsp.c:734
Me to. Also, starting XFree causes a panic.
-Seth
To Unsubscribe: send ma
I got this message (after fifo fix kernel):
May 21 13:54:35 waterblue kernel: ../../../vm/uma_core.c:1324: could sleep with
"pcm0:play:0" locked from ../../../dev/sound/pcm/dsp.c:734
May 21 13:54:35 waterblue kernel: ../../../vm/uma_core.c:1324: could sleep with
"pcm0:play
Hi, I upgraded my kernel today, it was a week old, and when I try to
listen anything it sais:
pcm0: play interrupt timeout, channel dead
I'm in a Sony VAIO XG38.
---
PD: Is anyone still working with in the CFS/mount_nfs problem?
To Unsubscribe: send ma
On Sun, Sep 10, 2000 at 09:49:24PM +0200, Szilveszter Adam wrote:
> Since no one this far has reported anything like this,
... http://www.FreeBSD.org/cgi/query-pr.cgi?pr=20731
- mark
--
Mark Newton Email: [EMAIL PROTECTED] (W)
Network Engineer
, drq 1, 5
pcm0: on sbc0
midi0: on sbc0
midi1: on sbc0
midi2: at port 0x620-0x623,0xa20-0xa23,0xe20-0xe
23 on isa0
emu2: DRAM size = 512KB
Sound support is compiled into the kernel.
The system is:
FreeBSD fonix.hos.u-szeged.hu 5.0-CURRENT FreeBSD 5.0-CURRENT #14: Sun Sep
10 04:02:07 CEST
[Dell XPS B800 w/ 3c905C-TX and Aureal Vortex 8830 soundcard]
I tried to upgrade my -current today. It had been running a -current
from Aug 14. However, neither my NIC (xl0) nor my soundcard (pcm0)
were detected on boot. All the relevant drivers are compiled into the
kernel, but the PCI code
mpu0 at isa? port 0x330 irq 6 drq 0
# for newpcm, I use following lines
options PNPBIOS
controller pnp0 # PnP support for ISA
device pcm0
any clues would be appreciated
thanks
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "un
Phil Regnauld writes:
| I was running a kernel from end of august, and everything worked
| fine (IBM PC 300 PL, PII-350, 128 MB RAM, built-in audio):
|
| Oct 5 13:28:29 aylee /kernel: pcm1 (CS423x/Yamaha/AD1816 sn 0x) at
|0x530-0x537 irq 5 drq 1 flags 0x13 on isa
|
|
I was running a kernel from end of august, and everything worked
fine (IBM PC 300 PL, PII-350, 128 MB RAM, built-in audio):
Oct 5 13:28:29 aylee /kernel: pcm1 (CS423x/Yamaha/AD1816 sn 0x) at
0x530-0x537 irq 5 drq 1 flags 0x13 on isa
Since make world last week:
i gave "current" a try and had no more sound as the pnp configuration was
gone.
Yesterday night at home i did the following to have it working again:
(The sound-chip has the vendor_id 0x0100a90d. It is SB16 and MSS
compatible and as far as i understand it now THAT is the problem. It
switc
Hello!
After upgrade my system from 19990812-current, pcm0 work some strange...
My SB128PCI decribed at my kernel as following:
device pcm0
It normaly detected at boot-time:
# dmesg | grep pcm0
pcm0: irq 10 at device 11.0 on pci0
but play & waveplay (from ports) incorrect plays wav-f
pcm is again working correctly with the Yamaha YMF715 based sound system
of my laptop.
It had been working fine up till shortly before secure/libcrypt broke on
-current.
Then I had an array of strange problems.
After testing and logging the various failures with cat, mpg123,
xanim, rvplayer, an
> pcm no longer works correctly the Yamaha YMF715 based sound system
> of my laptop.
> It was working fine up till shortly before secure/libcrypt broke on -current.
i haven't done anything recently on the pcm driver.
Also, it seems that you have changed hardware. can you check if the old
kernel
+[ br...@worldcontrol.com ]-
| pcm no longer works correctly the Yamaha YMF715 based sound system
| of my laptop.
|
| mpg123 given the song 'I am pretty, oh so pretty' will produce
|
| I I I I I am am am am am prre prre prre ty ty ty ty , , , , oh o
pcm no longer works correctly the Yamaha YMF715 based sound system
of my laptop.
It was working fine up till shortly before secure/libcrypt broke on -current.
The kernel with broken pcm0 is from:
FreeBSD top.worldcontrol.com 4.0-CURRENT FreeBSD 4.0-CURRENT #3: Mon Jan 25
02:53:31 PST 1999
gt; > 0x13 on isa
> > Probing for devices on the ISA bus:
> ...
> > pcm0 not found
>
> if you mean we should not report devices not found unless booting in
> verbose mode, i think other drivers do that as well. If you mean that
> you'd like to have the card
> This is a trivial problem, but I just thought I'd let someone know about
> it. (cosmetic) Take a look at my dmesg output:
...
> Probing for PnP devices:
...
> pcm1 (SB16pnp sn 0x) at 0x220-0x22f irq 5 drq 1 flags
> 0x13 on isa
> Probing for devices on the ISA bu
on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 irq 12 on isa
psm0: model IntelliMouse, device ID 3
pcm0 not found
The rest has been cut out because it doesn't matter.
My problem is that although pcm1 works, why d
> I tried out pcm0 for sound on a ViBRA16x soundcard (don't laugh) and sound
> works. The only problem is that there is no mixer. I was wondering if this
> was a known problem with my card, or if nobody has done the mixer code
i think it kind of worked a few months ago when i put
I tried out pcm0 for sound on a ViBRA16x soundcard (don't laugh) and sound
works. The only problem is that there is no mixer. I was wondering if this
was a known problem with my card, or if nobody has done the mixer code
yet... Thanks.
Kenneth Culver
Computer Science Major at the Universi
46 matches
Mail list logo
