Re: PCM sound problems in -current ??

2001-06-21 Thread Warner Losh
In message <006501c0fa71$7fa71a40$0504020a@haveblue> "Cameron Grant" writes: : while i've not tested either of these chips for a while (lack of slots, : anyone know of a motherboard with ~20 pci and ~10 isa slots?) i can't think : of any changes that might cause this except possibly the introducti

Re: PCM sound problems in -current ??

2001-06-21 Thread Søren Schmidt
It seems Cameron Grant wrote: > > I'm having problems with both an internal VIA'686 and a PCI base > > ESS Solo1, both seem to loose interrupts. The interrupts doesn't > > even show up in a vmstat -i / systat so something is definitly > > wrong. BTW the exact same HW work just fine with -stable ?

Re: PCM sound problems in -current ??

2001-06-21 Thread Cameron Grant
> I'm having problems with both an internal VIA'686 and a PCI base > ESS Solo1, both seem to loose interrupts. The interrupts doesn't > even show up in a vmstat -i / systat so something is definitly > wrong. BTW the exact same HW work just fine with -stable ? while i've not tested either of these

PCM sound problems in -current ??

2001-06-21 Thread Søren Schmidt
I'm having problems with both an internal VIA'686 and a PCI base ESS Solo1, both seem to loose interrupts. The interrupts doesn't even show up in a vmstat -i / systat so something is definitly wrong. BTW the exact same HW work just fine with -stable ? Cameron ? anyone ? -Søren To Unsubscribe:

Re: PCM sound problems

1999-06-23 Thread Anonymous
Oops, forgot my pnpinfo output Checking for Plug-n-Play devices... Card assigned CSN #1 Vendor ID CSC4236 (0x3642630e), Serial Number 0x PnP Version 1.0, Vendor Version 5 Device Description: Crystal Codec Logical Device ID: CSC 0x630e #0 Device Description: WSS/SB TAG Start

PCM sound problems

1999-06-23 Thread Anonymous
I have a problem with the way my soundcard behaves. It stutters when using mpg123, where a small segment of music is played a number of time before moving onto the next segment. Looking at the code, I see that the DMA is set up in auto mode. I can only surmise that interrupts are not being ser