On 11/22/2022 5:00 PM, Tomoaki AOKI wrote:
A long shot, but I am curious if by chance you have hwpstate_intel for
your cpu frequency driver. If so, does setting
dev.hwpstate_intel.0.epp=0 make any difference ?
Yes, I have four of those, set to 50 by default. Let me try.
--HPS
FYI: I habitall
On 11/17/2022 11:47 PM, Hans Petter Selasky wrote:
Hi,
I'm doing some work with audio and have noticed some problems with the
ULE scheduler. I have a program that generate audio based on
key-presses. When no keys are pressed, the load is near 0%, but as
soon as you start pressing keys, the lo
On RELENG_12, I was able to mount via NFS /usr/obj and src and do an
installworld on read only mounts. However, with RELENG_13 and above, I
get permission denied errors. The install seems to continue just fine,
but I am not sure if something subtle is being missed. Looking at what
gets installe
On 1/4/2022 11:56 AM, tech-lists wrote:
On Tue, Jan 04, 2022 at 02:06:43PM +, tech-lists wrote:
Hello,
On Wed, Dec 22, 2021 at 02:42:48PM +0200, Andriy Gapon wrote:
There have been some reports on strange / unexpected things with
Ryzen 5xxx
processors. I think I have seen 5950X, 5900X a
On 1/25/2021 4:51 PM, John Kennedy wrote:
> On Mon, Jan 25, 2021 at 04:17:18PM -0500, mike tancsa wrote:
>> Is there a way to check from the bin if its the right version ? strings
>> of the file doesnt seem to show anything useful. I wonder if its the
>> UEFI boot th
On 1/25/2021 4:03 PM, Toomas Soome wrote:
>
>
>> On 25. Jan 2021, at 22:15, mike tancsa > <mailto:m...@sentex.net>> wrote:
>>
>> On 1/25/2021 2:37 PM, Toomas Soome via freebsd-current wrote:
>>>
>>>> On 25. Jan 2021, at 21:31, Micha
On 1/25/2021 2:37 PM, Toomas Soome via freebsd-current wrote:
>
>> On 25. Jan 2021, at 21:31, Michael Butler via freebsd-current
>> wrote:
>>
>> I have a few machines on which I've been hesitant to run 'zpool upgrade' as
>> I'm not sure of the (boot?) implications. They report like this ..
>>
>>
I ran into an issue not being able to boot because of v2 bookmarks on
the boot pool on RELENG_13 just last Friday.
---Mike
On 1/25/2021 2:31 PM, Michael Butler via freebsd-current wrote:
> I have a few machines on which I've been hesitant to run 'zpool
> upgrade' as I'm not sure of the (boot?
On 11/9/2020 7:32 AM, Lev Serebryakov wrote:
> On 07.11.2020 2:46, Eric Joyner wrote:
>
>> The other issue is that I still don't know which devices need a
>> restart / which devices do not, or whether a restart is strictly
>> necessary and if there is another way to do this without worrying
>> abou
t; - Eric
>
> On Fri, Nov 6, 2020 at 12:48 PM mike tancsa <mailto:m...@sentex.net>> wrote:
>
> On 11/6/2020 2:17 PM, mike tancsa wrote:
> > On 5/31/2020 5:39 PM, Lev Serebryakov wrote:
> >> Hello Ian,
> >>
> >> Thursday,
On 11/6/2020 2:17 PM, mike tancsa wrote:
> On 5/31/2020 5:39 PM, Lev Serebryakov wrote:
>> Hello Ian,
>>
>> Thursday, May 28, 2020, 2:45:48 AM, you wrote:
>>
>>> I noticed that my VLAN interfaces stopped working after a recent build.
>>> tcpdump sh
On 5/31/2020 5:39 PM, Lev Serebryakov wrote:
> Hello Ian,
>
> Thursday, May 28, 2020, 2:45:48 AM, you wrote:
>
>> I noticed that my VLAN interfaces stopped working after a recent build.
>> tcpdump showed traffic leaving leaving and entering the interface but no
>> host on the network actually rec
On 9/16/2020 2:07 PM, sth...@nethelp.no wrote:
> # override default of no subsystems
> -Subsystemsftp/usr/libexec/sftp-server
> +Subsystemsftpinternal-sftp -l INFO
Hi,
What is the difference between these two ? Is it not all OpenSSH ?
---Mike
_
On 7/14/2020 5:14 AM, Willem Jan Withagen wrote:
> On 14-7-2020 07:45, Andriy Gapon wrote:
>> On 14/07/2020 03:39, Willem Jan Withagen wrote:
>>> And what I read from the manual page, mrsas plays even nicer with
>>> CAM which is a
>>> plus.
>> If by "nicer" you mean that mfi does not integrate with
On 2/13/2020 2:22 AM, Peter Jeremy wrote:
> On 2020-Feb-12 15:23:51 -0500, mike tancsa wrote:
>> Not sure about the older Athlon CPUs, but the 2 generations of Ryzen's I
>> have seem correct as well as an APU
>>
>> CPU: AMD GX-412TC SOC
On 2/12/2020 1:39 PM, Chris wrote:
> Hard as I try I can not get anything close to the actual temperature
> of the CPUs or cores while running on FreeBSD.
> Family: Athlon X4
> Manufacturer: AuthenticAMD
>
Not sure about the older Athlon CPUs, but the 2 generations of Ryzen's I
have seem co
refix so far.
>
> Can someone give a tip?
What does you ppp.conf look like ?
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
On 10/20/2018 4:31 AM, Dave Cottlehuber wrote:
> On Fri, 19 Oct 2018, at 19:46, Mike Tancsa wrote:
>> Feeding entropy: .
>> lo0: link state changed to UP
>> sendmsg on igb0: No buffer space available
>> igb0: link state changed to UP
>> cxl1: link state changed to
: .
lo0: link state changed to UP
sendmsg on igb0: No buffer space available
igb0: link state changed to UP
cxl1: link state changed to UP
Starting Network: lo0 igb0 cxl0 cxl1.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
On 10/18/2018 2:50 PM, Mike Tancsa wrote:
> On 10/18/2018 2:26 PM, Konstantin Belousov wrote:
>> On Thu, Oct 18, 2018 at 11:12:11AM -0400, Mike Tancsa wrote:
>>> On r339386 I am seeing a 100% hang at boot up time. Boot ends at
>>>
>>> Going back to r339385
On 10/18/2018 2:26 PM, Konstantin Belousov wrote:
> On Thu, Oct 18, 2018 at 11:12:11AM -0400, Mike Tancsa wrote:
>> On r339386 I am seeing a 100% hang at boot up time. Boot ends at
>>
>> Going back to r339385 works. But going to the next commit hangs the box
>>
&
acquired and loaded
PCIe: Memory Mapped configuration base @ 0xf800
The box is hard locked up and I cannot break to debugger either.
Going back to r339385 works. But going to the next commit hangs the box
https://lists.freebsd.org/pipermail/svn-src-head/2018-October/118853.html
---Mike
On 10/14/2018 2:19 PM, Mateusz Guzik wrote:
> On 10/14/18, Mike Tancsa wrote:
>> On 10/13/2018 12:48 PM, Allan Jude wrote:
>>> Strange that your crash is in ZFS here...
>>>
>>> Can you take a crash dump?
>>>
>>> It looks like something is t
int ?
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
___
freebsd-current@freebsd.org mailing list
https://lists.f
.cxl.1.stats.tx_frames: 8516945
dev.cxl.1.stats.tx_octets: 8434330861
dev.cxl.1.stats.tx_parse_error: 0
> Regards,
> Navdeep
>
>
>
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www
ures[31:0]:22294ada HATS = 0x2
GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup
= 0x2 DualEventLogSup = 0x2
ivhd0: Extended features[62:32]:f77ef Max PASID: 0x2f DevTblSegSup = 0x3
MarcSup = 0x1
ivhd0: supported paging level:7, will use only: 4
ivhd0: device range:
press 2 endpoint max data 512(2048) FLR RO NS
link x8(x8) speed 8.0(8.0)
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambr
P,VClean,AFlush,DAssist,NAsids=32768
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33226657792 (31687 MB)
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Interne
10' $x
> # 1095
> cpucontrol -m '0xc0011020|=0x200' $x
> done
>
> ___
> freebsd-current@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebs
curthread == curthread
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada
___
freebsd-current@freebsd.org mailing list
htt
some of this is just redundand.
Thanks, I will run the tests on the Epyc system over the next few days.
It took a little longer to crash the Epyc than the Ryzen. The Ryzen is
still going now for 20hrs. Previously 5-10 min were enough to trigger
the hard lockup.
---Mike
--
Should I run the same cpuctl commands on those CPUs ? BTW, I am happy
to loan one out to you in the FreeBSD netperf cluster for a few weeks
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400 x203
Sentex Communications, m...@sentex.net
Providing Internet services since 1994
0xc0011020|=0x10' $x
> # 1049
> cpucontrol -m '0xc0011028|=0x10' $x
> # 1095
> cpucontrol -m '0xc0011020|=0x200' $x
> done
>
> ___
> freebsd-current@freebsd.org mailing list
> ht
On 1/31/2018 8:37 AM, Mike Tancsa wrote:
> Hi folks,
> I have been running into some deadlock issues on Ryzen boards. The
> most easy way to trigger the problem is to compile net/samba47 from the
> ports.
>
> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=225584
>
time the compile deadlocks. I have seen this both on RELENG_11 as well
as HEAD from r328611
Any ideas how to possibly work around this ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994
/lists.freebsd.org/pipermail/svn-ports-all/2018-January/171209.html
Thanks!
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_
crocode from Intel that gets clobbered in your
diffs.
Thanks!
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge,
s out of the box.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-current
= 'LSI Logic / Symbios Logic'
device = 'MegaRAID SAS-3 3108 [Invader]'
class = mass storage
subclass = RAID
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services sin
On 4/7/2015 3:14 PM, Mike Tancsa wrote:
On 4/7/2015 3:04 PM, Garrett Cooper wrote:
Hi,
I just tried to upgrade my system from a Nehalem style era
CPU/motherboard (a W series Xeon/P6T-WS) to a Haswell style
CPU/motherboard (an E-series Haswell/Z97 motherboard), and I’ve run
into some fun
Version: S1200RP.86B.02.01.0004.051320141432
Release Date: 05/13/2014
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canad
Oct 06 2014 12:00:15 active
APP 2.130.404-3836 Oct 16 2014 06:50:12 active
BTBL 2.02.00.00-0001 Aug 18 2010 11:44:44 active
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
version of FreeBSD are you using ? Ssh and Openssl from the ports
? or in the base ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com
attempting to go to stable/10 or head.
Actually, there seems to be a new caveat to this discussed in
https://lists.freebsd.org/pipermail/freebsd-stable/2015-January/081521.html
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communi
patch would only effect userland applications that use /dev/crypto...
>
> If they do their own AES-NI work, then there isn't any improvement...
For me its ssh which I think does, no ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sen
ENG_9, please let me know
as I am few boxes that I would be happy to test/deploy on.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-current@freebsd.org
l 1
ecap 0004[170] = Power Budgeting 1
stats etc attached.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com
un time 0+00:02:00, incarnations 21, load 80, verbose 1
>
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
-
p0OK u0 465.76 GB SATA 0 -WDC
WD5002AALX-00J3
p1OK u0 465.76 GB SATA 1 -WDC
WD5002AALX-00J3
//offsite2>
--
---
Mike Tancsa, tel +1 519 651 3400
Sent
On 8/10/2012 9:31 AM, John Baldwin wrote:
> On 8/9/12 5:04 PM, Mike Tancsa wrote:
>> Start up the tw_cli client
>>
>> 0{offsite2}# tw_cli
>> //offsite2> show
>>
>> Ctl Model(V)Ports D
On 8/9/2012 3:28 PM, Mike Tancsa wrote:
> On 8/9/2012 1:21 PM, John Baldwin wrote:
>>
>> Humm, I wonder if this module has a mix of old and new .o files somehow?
>> Perhaps try rebuilding twe.ko from scratch after doing a 'make clean'?
>
> I think you are ri
IOS BE7X 1.08.00.048
twe0: Calling make_dev()
twe0: make_dev() returned 0xfe0122105200 (twe0)
twed0 on twe0
twed0: 953878MB (1953542144 sectors)
0{offsite2}#
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services
we_dev));
> sc->twe_dev_t->si_drv1 = sc;
> +device_printf(sc->twe_dev, "make_dev() returned %p (%s)\n",
> sc->twe_dev_t,
> + sc->twe_dev_t->si_name);
> /*
> * Schedule ourselves to bring the controller up once interrupts
>
On 8/8/2012 2:39 PM, Mike Tancsa wrote:
> On 8/8/2012 7:27 AM, John Baldwin wrote:
>>> Looks like it breaks 3dm2 and the tw_cli. With the patch, I am not able
>>> to see the 8006 controller I added.
>>
>> Ugh, ok. A few questions:
>>
>> 1) Do
it does, does basic I/O to the drives work?
yes
>
> 3) Can you add some debugging printfs to twe_ioctl() to see what, if anything,
>fails in that routine when tw_cli makes a request?
Yes, for sure. Let me know what you would like me to add.
---Mike
--
---
and invariants_support in the kernel)
0{offsite2}# tw_cli
//offsite2> show
Ctl Model(V)Ports Drives Units NotOpt RRate VRate BBU
c09650SE-2LP 2 21 0 1 1 -
/
r/jhb/cleanup/sys/dev/twe/twevar.h 2012-08-03
04:00:49.0
--
Patching file twevar.h using Plan A...
Hunk #1 succeeded at 134.
Hunk #2 succeeded at 210.
Hunk #3 succeeded at 255.
done
0{offsite2}#
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@
ks like pc98 i386 built just fine recently. Not sure why the mips
build keeps failing so much. des from .no would know :)
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridg
ncsa.com/ule-bsd.html
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd
>
> Also what filesystem you were using?
UFS
> How many CPUs were in place?
4
> Did you reboot before to move the steal_thresh value?
No.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services
can, but how do I do that ?
---Mike
--
-------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
7 39.4353840.59814114
Difference at 95.0% confidence
1.27033 +/- 0.412636
3.32852% +/- 1.08119%
(Student's t, pooled s = 0.425627)
a value of 1 is *slightly* faster.
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sent
dent's t, pooled s = 0.0200388)
hardware is X3450 with 8G of memory. RELENG8
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ont
he watchdog code there no ?
( /usr/src/sys/i386/i386/geode.c)
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
_
s wants
to add a boot partition even if there is one already there. e.g. go to
guided, delete / and the swap and add some partitions. When you create a
new / it will say it needs a boot partition, but that already exists and
now there will be two.
---Mike
--
-------
Mike Tancsa
9h tinyBIOS V1.4a (C)1997-2007
vs
Geode LX: PC Engines ALIX.3 v0.99h tinyBIOS V1.4a (C)1997-2007
Perhaps engage the PCEngine's folks to see what the difference is and if
they know what might be up.
---Mike
>
>
>
>
> -Original Message-
> From: M
id 10 ]
> Stopped at 0xc05a9aa4 = kdb_enter+0x34:movl$0,0xc07d93b4 =
> kdb_why
>
> Is still the result..
>
> -Original Message-
> From: Mike Tancsa [mailto:m...@sentex.net]
> Sent: Wednesday, August 31, 2011 10:53 AM
> To: Adrian Chadd
> Cc: E
txt at
http://www.tancsa.com/beta2.html
What if you add
option CPU_GEODE
option CPU_SOEKRIS
to the kernel ? I think actually only one is needed, but I forget which one.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m.
GCS registers
device_attach: ichwd0 attach returned 6
pcib0: allocated type 4 (0x3f0-0x3f5) for rid 0 of fdc0
pcib0: allocated type 4 (0x3f7-0x3f7) for rid 1 of fdc0
ppc0: cannot reserve I/O port range
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
--
---
Mike Tancsa, tel
s, 0 times driver blocked)
0 key ops (0 errors, 0 times driver blocked)
0 crypto dispatch thread activations
0 crypto return thread activations
Seems to be kicking the hifn card.
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providi
removable, self powered
Root mount waiting for: usbus1
uhub1: 4 ports with 4 removable, self powered
Trying to mount root from nfs: []...
NFS ROOT: 10.255.255.1:/home/pxe9
stray irq7
soekris3#
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing I
BSD as a router/firewall only.
>>
>> FreeBSD (and em) need some tuning for high perfomance.
>>
>> Next links in russian, sorry.
>>
>> http://dadv.livejournal.com/138951.html
>> http://dadv.livejournal.com/139170.html
>> http://dadv.livejournal.com/139366.html
On 8/5/2011 12:01 PM, Mike Tancsa wrote:
>
> and mount it. However, speeds seem a bit slow, but I am not sure if
> thats to be expected.
>
> i5# dd if=/dev/zero of=/mnt/test bs=1024k count=100
> 100+0 records in
> 100+0 records out
> 104857600 bytes transferred in 13.99
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-current@freebsd.o
at scbus1 target 3 lun 0 (pass8,ada7)
at scbus1 target 4 lun 0 (pass9,ada8)
at scbus1 target 15 lun 0 (pass10,pmp1)
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambri
s me to try something on it.
>
Do you have any usb devices plugged in ? ie what does
usbconfig
show ?
Also, what USB settings do you have in the BIOS ? I would try disabling
usb legacy mode and and things like 80-64 translation.
---Mike
--
---
Mike Tancsa, tel
202.html
Hopefully MFC'd soon ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridge, Ontario Canada http://www.tancsa.com/
___
freebsd-c
Are you testing with what is in HEAD ? ie. 7.2.3 or something else ?
Your subject line implies something else.
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www
netboot, it would fail. Does it work for you if the driver is
statically compiled into the kernel by chance ?
---Mike
--
---
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, m...@sentex.net
Providing Internet services since 1994 www.sentex.net
Cambridg
last = 0xc90ccaa0},
p_mqnotifier = {lh_first = 0x0}, p_dtrace = 0x0, p_pwait = {cv_description =
0xc08f00ef "ppwait", cv_waiters = 0}, p_dbgwait = {cv_description = 0xc08f00f6
"dbgwait",
cv_waiters = 0}}
(kgdb)
--
---
Mike Tancsa, tel +1 519 651 3400
Sen
gt;
>>> ___
>>> freebsd-...@freebsd.org mailing list
>>> http://lists.freebsd.org/mailman/listinfo/freebsd-net
>>> To unsubscribe, send any mail to "freebsd-net-unsubscr...@freebsd.org"
>>
>>
On 1/20/2011 9:30 AM, Matthew Fleming wrote:
> As far as I can tell this is another cvsup / tinderbox bug. Both
> sysctl.h and tsc.c were modified in r217616 but somehow tsc.c is
> seeing the old version of sysctl.h. This happened on another of my
> commits a few weeks ago.
Sometimes it takes a
On 1/17/2011 11:07 AM, Marek Salwerowicz wrote:
>>> Hi,
>>> Try adding
>>> option CPU_SOEKRIS
>>
>> Sorry, for the 5501 thats
>>
>> option CPU_GEODE
>>
>> ---Mike
>
> I have added both. Is there any possible test to check if watchdog
> really does reboot ?
> Just start /usr/sbin/
On 1/16/2011 9:45 PM, Mike Tancsa wrote:
> On 1/16/2011 6:17 PM, Marek Salwerowicz wrote:
>> Hi all,
>>
>> what modules to kernel should I load in order to make use of hardware
>> watchdog installed in Soekris net5501 ?
>
> Hi,
> Try adding
> option
On 1/16/2011 6:17 PM, Marek Salwerowicz wrote:
> Hi all,
>
> what modules to kernel should I load in order to make use of hardware
> watchdog installed in Soekris net5501 ?
Hi,
Try adding
option CPU_SOEKRIS
to your kernel. Then just startup /usr/sbin/watchdogd
---Mike
On 12/21/2010 5:49 PM, Matthew Fleming wrote:
>> /src/sys/kern/kern_fail.c:557: error: dereferencing pointer to incomplete
>> type
>> /src/sys/kern/kern_fail.c:557: error: dereferencing pointer to incomplete
>> type
>> /src/sys/kern/kern_fail.c:557: error: dereferencing pointer to incomplete
>>
On 12/7/2010 6:07 AM, Bjoern A. Zeeb wrote:
> On Tue, 7 Dec 2010, Alexander Motin wrote:
>
>>> Does mpd work in -current ? Last tried I, netgraph had problems with
>>> mpd.
>>
>> Sure it does! What is the problem?
>
> There have been several reports (incl. panics) on various lists like
> net, sta
.full
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
---
At 02:02 PM 9/10/2010, Doug Barton wrote:
In that case I apologize for the misunderstanding. I've used
procmail for many years on the receiving end but was not aware of
the ability to use it in the manner you suggested.
Have the tinderbox send just one email to a local account, then use
proc
o the tinderboxes so that
des and myself and others who admin the boxes only get such
messages. I didnt want to make such changes without des' approval
and was waiting for his input...
---Mike
---
going to the list ?
---Mike
--
Denny Lin
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
----
inbond WDs. A long time ago I hacked together one
for the 83697
http://www.tancsa.com/watchdog/itxwd-1.0/
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Sentex Comm
able to actually get it to work on this board ?
>
>---Mike
>
>
> ----
> Mike Tancsa, tel +1 519 651 3400
> Sentex Communications,
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994www.sentex.net
Cambridge, Ontario Canada
d.org"
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994www.sentex.net
Cambridge, Onta
eb-li...@lists.zabbadoz.net>bzeeb-li...@lists.zabbadoz.net> wrote:
On Sat, 10 Apr 2010, Mike Tancsa wrote:
Hi Mike,
At 05:11 PM 4/9/2010, Jack Vogel wrote:
Don't know, but I would just ignore it, I think its a false warning anyway.
OK. I updated to HEAD as of this AM, but now I get a panic at
,c600a520,c5b2ad38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xc5b2ad70, ebp = 0 ---
db>
Jack
On Fri, Apr 9, 2010 at 2:05 PM, Mike Tancsa
<<mailto:m...@sentex.net>m...@sentex.net> wrote:
At 04:13 PM 4/9/2010, Pyun YongHyeon wrote:
On
ddress: 00:15:17:c8:4b:98
----
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,m...@sentex.net
Providing Internet since 1994www.sentex.
1 - 100 of 171 matches
Mail list logo
