In message: <[EMAIL PROTECTED]>
Gordon Tetlow <[EMAIL PROTECTED]> writes:
: I've personally killed about 5 keyboards this way. I don't recommend hot
: plugging PS/2 keyboards.
PS/2 keyboards and mice are not hot pluggable. Mechanical switches do
not meet the spec, but are less bad tha
We discuss rc on [EMAIL PROTECTED] Feel free to send any ideas
to that list.
Doug
--
This .signature sanitized for your protection
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send a
On Sun, 14 Sep 2003, masta wrote:
> I owe you a beer Doug (or a soda-pop)! ;)
hehe :)
> You were correct about the sysctl.conf being the root-cause of the kernel
> spew.
Mike Smith ran into it one day and we spent some time debugging it.
Someone made the observation that they were sysctl items
I get the same problem in the same place with current as of today.
Cheers,
Mark
On Sat, 2003-09-13 at 20:37, Matt wrote:
> After building world as of late last night I decided to portupgrade
> -rRaf, mainly due to having the libintl.so.4 missing problem when I
> tried to start X. Everything co
In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
writes:
> Sep 14 17:46:52 target logger: TCP_Wrappers ALLOW: source/tar
> get,rshd,974,[EMAIL PROTECTED]
> Sep 14 17:46:52 target inetd[974]: connection from source, servic
> e rshd (tcp)
> Sep 14 17:46:52 target rshd[974]: [EMAIL PROTECTED] as
Yes - rsh , after enabling "login/rlogind" ;), gives me a shell
on . Even after enabling "login/rlogind", rsh
still fails as outlined below.
On 14 Sep, David Rhodus wrote:
>
> On Sunday, September 14, 2003, at 07:29 PM, [EMAIL PROTECTED]
> wrote:
>
>> Sep 14 17:46:52 target logger: TCP_Wrap
On Sunday, September 14, 2003, at 07:29 PM, [EMAIL PROTECTED]
wrote:
Sep 14 17:46:52 target logger: TCP_Wrappers ALLOW:
source/target,rshd,974,[EMAIL PROTECTED]
Sep 14 17:46:52 target inetd[974]: connection from source,
service rshd (tcp)
Sep 14 17:46:52 target rshd[974]: [EMAIL PROTECTED] a
Sep 14 17:46:52 target logger: TCP_Wrappers ALLOW:
source/target,rshd,974,[EMAIL PROTECTED]
Sep 14 17:46:52 target inetd[974]: connection from source, service rshd
(tcp)
Sep 14 17:46:52 target rshd[974]: [EMAIL PROTECTED] as root: permission
denied (authentication error). cmd='date'
/root/.r
Folks,
I've noted that the following inconsistency exists in make release. If
there is a install.cfg file in /usr/src/release when executing make
release (the file which if exists is placed into the root of mfs and
customises behaviour of sysinstall), /usr/src/release/install.cfg takes
precede
On Sat, Sep 13, 2003 at 03:37:51PM +0100, Stuart Walsh wrote:
> On Fri, Sep 12, 2003 at 09:55:54PM -0400, Jung-uk Kim wrote:
> > I have my own *working* driver, which is for 4-STABLE. It works with
> > SK-9521 V2.0 (for me, at least) and it should work with 3C940.
> >
> > Note: This driver is po
With today's cvsup, I cannot create a md based /tmp. If I run
'mount_mfs -s 512m md /tmp' (what runs from the entry in fstab), it
says:
mount_mfs: newfs exited with error code 36
if I separate the operations, mdconfig runs fine, but newfs says:
/dev/md0: 512.0MB (1048576 sectors) block size 163
I am having troubles installing -current from JSNAP -current iso images
on my Dell Latitude C600 laptop. Everything is ok when / has not been
set on softupdates, but when softupdates is activated on / (and / is the
only partition besides swap) I get an error during extraction of base.
kernel: ty
It seems Pav Lucistnik wrote:
>
> This patch works for me. Any chance to get it committed?
I'll look at it...
-Søren
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL P
In message: <[EMAIL PROTECTED]>
"Brandon S. Allbery KF8NH" <[EMAIL PROTECTED]> writes:
: On Sat, 2003-09-13 at 18:49, M. Warner Losh wrote:
: > and you cannot tell dhclient that interfaces have arrived.
:
: dhclient(8) seems to think otherwise, although it doesn't explain quite
: how (
TB --- 2003-09-14 20:08:26 - starting CURRENT tinderbox run for i386/pc98
TB --- 2003-09-14 20:08:26 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/i386/pc98
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-09-14 20:11:56 - building world
TB --- cd /home
I can confirm this on i386, and sparc also.
This is a semi-anoying hickup for those who wish to make tiny root-msf
images for a soekris boards, or nfs diskless, and/or mfs-root floppies,
etc.
I belive PHK is/was looking for the root cause of this, which was a thread
that had something to do with bs
On Sun, 14 Sep 2003, Pav Lucistnik wrote:
> V so, 06. 09. 2003 v 21:41, Bruce Evans pí¹e:
> > On Sat, 6 Sep 2003, Pav Lucistnik wrote:
> >
> > > after recent ATAng changes, cdcontrol close stopped working
> > > with my CD-ROM drive. It used to close the tray. It works with -f
> > > /dev/cd0 but no
* Deiter Alexandr Valerievich <[EMAIL PROTECTED]> [2003-09-14 22:10]:
> mdmfs: newfs exited with error code 36
This error seems to be generic, I see it on i386 too. I usually
mount /tmp with the following entry from fstab:
md /tmp mfs rw,-s250m 2 0
This gives the newfs error mentioned above.
V so, 06. 09. 2003 v 21:41, Bruce Evans píše:
> On Sat, 6 Sep 2003, Pav Lucistnik wrote:
>
> > after recent ATAng changes, cdcontrol close stopped working
> > with my CD-ROM drive. It used to close the tray. It works with -f
> > /dev/cd0 but not with /dev/acd0. cdcontrol eject still works fine.
>
On Sun, 14 Sep 2003 20:08:17 +0200 (CEST)
Soren Schmidt <[EMAIL PROTECTED]> wrote:
> This is with an uptodate -current ?
pigra:/home/saturnero> uname -a
FreeBSD pigra.saturnero.sat 5.1-CURRENT FreeBSD 5.1-CURRENT #10:
Mon Sep 8 01:15:32 CEST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/PIGRA
mdmfs don't work on CURRENT diskless sparc64:
Loading configuration files.
Entropy harvesting: interrupts ethernet point_to_point.
Starting file system checks:
nfs: can't update /var/db/mounttab for 1.1.1.1:/sparc64/netboot
cp: utmp: Read-only file system
/etc/rc.d/cleanvar: cannot create /var/run
Can ANYONE out there get a panic dump on an ATA disk with ATAng?
I can't get my 9/9/2003 kernel to dump, nor a current -CURRENT.
Thanks,
LER
--
Larry Rosenman http://www.lerctr.org/~ler
Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED]
US Mail: 1905 Steamboat Sp
I owe you a beer Doug (or a soda-pop)! ;)
You were correct about the sysctl.conf being the root-cause of the kernel
spew.
My sysctl.conf is having these lines:
#security.bsd.see_other_uids=0
sysctl net.inet.tcp.blackhole=1
sysctl net.inet.udp.blackhole=1
See the fau paux? I must have decided to
On Friday, 12 September 2003 at 5:10:39 +0200, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, [EMAIL PROTECTED]
> ibsd.org writes:
>> Did you ever consider that your doing exactly what phk's logo protests? ;)
>> Maybe that is why phk hasn't responded any further, because he's laughing
It seems Dario Freni wrote:
> > ata0: resetting devices ..
> > ata0-slave: FAILURE - ATA_IDENTIFY status=51 error=4
> > done
> >
> > Does anyone recognize this or have any idea why this happens or how I can
> > debug it further to get an idea?
>
> The same here (on a workstation) with an AOpen DV
On Sun, 07 Sep 2003 13:01:13 +, Arjan van Leeuwen wrote:
> Hi,
>
> Since the ATAng import, I can't use the cd ripper cdparanoia
> (audio/cdparanoia) with my IDE CD-ROM drive. When I direct cdparanoia to
> device /dev/acd0, it will exit with the message
>
> 006: Could not read any data fro
On Sat, 13 Sep 2003, masta wrote:
> For some time now I've have an issue with a dell laptop I use. It spews a
> bunch of kernel junk after init is spawned, and the spew causes my dmesg
> to become too full to actually produce a file I can send to the list that
> is meaningfull.
I remember this :)
On Sat, 13 Sep 2003, Matt wrote:
> After building world as of late last night I decided to portupgrade
> -rRaf, mainly due to having the libintl.so.4 missing problem when I
> tried to start X. Everything compiled perfectly fine (and X is now
> working fine) except for databases/mysql40-client. I g
--On Sunday, September 14, 2003 19:02:17 +0200 Sebastian Ssmoller
<[EMAIL PROTECTED]> wrote:
Am Son, 2003-09-14 um 17.49 schrieb Larry Rosenman:
I'm seeing similar messages from fsck:
unexpected soft-update inconsistency, unable to write block, etc.
going back to my 9/9/2003 "good" kernel, it
Am Son, 2003-09-14 um 17.49 schrieb Larry Rosenman:
> I'm seeing similar messages from fsck:
>
> unexpected soft-update inconsistency, unable to write block, etc.
>
> going back to my 9/9/2003 "good" kernel, it works.
i tried to use my old kernel; build with sources from fbsd 5.1 release).
i reb
On Sun, 14 Sep 2003 09:41:44 +0200 (CEST)
Niklas Saers Mailinglistaccount <[EMAIL PROTECTED]> wrote:
> Hi everyone,
> I haven't been using my DVD-ROM in my Fujitsu/Siemens S-1540 series laptop
> with FreeBSD for some time, so I don't know how long this problem has
> been. (I used it quite a bit wh
--On Sunday, September 14, 2003 18:46:19 +0200 Soren Schmidt
<[EMAIL PROTECTED]> wrote:
It seems Larry Rosenman wrote:
Also, when coming back up after the Panic on the same kernel, we get
unexpected soft-update
inconsistencies, cannot write block type errors from FSCK.
Going back to my Septembe
--On Sunday, September 14, 2003 18:46:19 +0200 Soren Schmidt
<[EMAIL PROTECTED]> wrote:
It seems Larry Rosenman wrote:
Also, when coming back up after the Panic on the same kernel, we get
unexpected soft-update
inconsistencies, cannot write block type errors from FSCK.
Going back to my Septembe
It seems Larry Rosenman wrote:
> Also, when coming back up after the Panic on the same kernel, we get
> unexpected soft-update
> inconsistencies, cannot write block type errors from FSCK.
>
> Going back to my September 9, 2003 kernel, fsck deals with the same exact
> filesystem just fine.
What
Am Son, 2003-09-14 um 17.30 schrieb Steve Kargl:
> On Sun, Sep 14, 2003 at 11:42:21AM +0200, Sebastian Ssmoller wrote:
> > i did cvsup for /usr/src yesterday and did a build world.
> > i also build a new kernel without all these debugging things.
>
> If you're running FreeBSD-current, I would sugg
Is there a known issue with recent -CURRENT (between September 10, 2003 and
today) where
you can't get a panic dump?
I have a kernel from yesterday's sources (modulo a reversion of
ata-lowlevel to version
1.10 because 1.11 won't boot), and some debugging code from Nate Lawson to
debug my
ACPI i
I'm seeing similar messages from fsck:
unexpected soft-update inconsistency, unable to write block, etc.
going back to my 9/9/2003 "good" kernel, it works.
so I think SOMETHING broke here.
LER
--On Sunday, September 14, 2003 08:30:51 -0700 Steve Kargl
<[EMAIL PROTECTED]> wrote:
On Sun, Sep 1
On Sun, Sep 14, 2003 at 11:42:21AM +0200, Sebastian Ssmoller wrote:
> i did cvsup for /usr/src yesterday and did a build world.
> i also build a new kernel without all these debugging things.
If you're running FreeBSD-current, I would suggest that
you put the debugging options back into your kern
On Sun, 14 Sep 2003, tokza wrote:
> hello,
> as you know, there is no more -pthread gcc flag in -current. but many ports
> (kde3, for example) still wants it. So what should I do to compile kde3
> succesfully? The one way I see now is to s/-pthread/-lc_r/g in Makefiles :-)
> maybe there is anoth
backing off to ata-lowlevel.c 1.10 allows me to boot again.
--On Saturday, September 13, 2003 18:54:18 -0500 Larry Rosenman
<[EMAIL PROTECTED]> wrote:
--On Saturday, September 13, 2003 18:09:21 -0500 Larry Rosenman
<[EMAIL PROTECTED]> wrote:
I have a ICH3 controller, and a 9/9 kernel works j
I've seen that too, although my problem was with my Alcatel Speedtouch
330 which routinely panics the system.
I'djust retrieved usr from a backup to get round it, and put it down to
the perils of -current, but if there is really a problem, I can
investigate further here.
Mark
Simon Brown wrot
hello,
as you know, there is no more -pthread gcc flag in -current. but many ports
(kde3, for example) still wants it. So what should I do to compile kde3
succesfully? The one way I see now is to s/-pthread/-lc_r/g in Makefiles :-)
maybe there is another way?
Thank you.
_
Hi...
Sorry to do a me too, but I have a similar problem after a cvsup midday
on the 13th September. The previous kernel was pre-ATAng.
The machine panic'd after inserting a friends wireless PCMCIA card
(but that's probably another unrelated issue), rebooted and left
me in single user after faili
It seems Pete Carah wrote:
>ASUS P5A or P5AB (one of each now) - won't boot without setting
>hw.ata.ata_dma=0. GEOM recognizes the drive itself but then the reads
>of the disklabels fail with a message that I can't find in the source,
>about a DMA failure. System then prompts to mount root and no
It seems Alastair G. Hogge wrote:
> Just a follow up.
>
> I've since been able to get my -CURRENT system running under the new build.
> However the booting process is still slow around those ata?: [MPSAFE]
> messages. Any ideas on getting a speed up?
I'm working on it...
-Søren
___
Just a follow up.
I've since been able to get my -CURRENT system running under the new build.
However the booting process is still slow around those ata?: [MPSAFE]
messages. Any ideas on getting a speed up?
-Al
___
[EMAIL PROTECTED] mailing list
http
On Thu, Sep 11, 2003 at 02:44:55PM +0200, Harti Brandt wrote:
>
> Hi,
>
> I just tried to upgrade one of my systems from a static root from july to
> an actual dynamic root. The installworld went fine 'til the place where
> /bin/test is installed. At that point the installation stopped with "ELF
Well, I misspoke on the timer; the one that works is booting in non-acpi
mode by "beastie"s choice; the older one still fails if I comment the acpi
ignore timer statement. Actually that one appears to run slow by about half.
Both fail equally in ATAng so acpi isn't making any difference (nor doe
ASUS P5A or P5AB (one of each now) - won't boot without setting
hw.ata.ata_dma=0. GEOM recognizes the drive itself but then the reads
of the disklabels fail with a message that I can't find in the source,
about a DMA failure. System then prompts to mount root and nothing I
type works. I see look
hi,
i did cvsup for /usr/src yesterday and did a build world.
i also build a new kernel without all these debugging things.
i rebooted the system and everything went fine first but then
i tried to recompile pf_freebsd and the system crashed.
i rebooted and did fsck and tried the rebuild again -
hi,
i did a lot of changes and tests last night :)
-u were right there was a bug in the network config (i fixed some named
entries)
now netstat -r is really fast (no timeouts which occured before)
-i wrote a simple c test program using gethostname, gethostbyname,
gethostbyaddr as suggested
it w
It seems Ashley Penney wrote:
> Hiya,
>
> I recently upgraded my -current box, only to have my Serial ATA device move
> from ar0 to ad6, making things cry.
Read UPDATING!! (hint you need to include device ataraid in your config).
-Søren
___
[EMAIL PROT
Hi everyone,
I haven't been using my DVD-ROM in my Fujitsu/Siemens S-1540 series laptop
with FreeBSD for some time, so I don't know how long this problem has
been. (I used it quite a bit when installing, so it hasn't always been
like this) When I boot up or do a "atacontrol reinit 0" I get
ata0: r
53 matches
Mail list logo
