On Thu, Nov 28, 2002 at 05:58:23PM -0700, Scott Long wrote:
> On Thu, Nov 28, 2002 at 06:58:05PM -0500, Christian Brueffer wrote:
> >
> > Hi,
> >
> > got a reproducable panic while inserting a 3Com Megahertz 3CCFE575BT
> > into an up to date -current system.
> > The card used to work fine with DP
On Thu, Nov 28, 2002 at 07:48:32PM -0700, M. Warner Losh wrote:
> In message: <[EMAIL PROTECTED]>
> Christian Brueffer <[EMAIL PROTECTED]> writes:
> : got a reproducable panic while inserting a 3Com Megahertz 3CCFE575BT
> : into an up to date -current system.
> : The card used to work f
On 29-Nov-2002 (01:34:27/GMT) Bruce Evans wrote:
RT>>> I have 4 primary partitions and I use a boot manager (magic.com)
[...]
RT>>> As far as I know it use an EXOR 0x10 to hide/unhide but fdisk
RT>>> doesn't recognize 0x0B/0x0C fat32 when hidden (0x1B/0x1C)
PHK>> I think this is very marginal use
Hello,
I am trying to use an usb modem under freebsd. It is detected during boot.
My system is current as of yesterday sources. Dmesg output is attached.
Modem is recognized as /dev/ugen0 and there is another node /dev/ugen0.1
I setup my ppp.conf file to use /dev/ugen0 when I try to use it t
This is all on a ASUSS8600 series notebook. I can't therefore provide
debugging console dumps, due to the leakage of serial interfaces
on the system. This system is based on the intel 440MX chipset.
However inserting the card gives immediate kernel dump.
A traceback is indicating that the crash is
On Fri, Nov 29, 2002 at 12:48:49AM +0100, Julian H. Stacey wrote:
> Kris Kennaway wrote:
> > On Thu, Nov 28, 2002 at 07:22:16PM +0100, Julian Stacey wrote:
> > > 5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
> > >=20
> > > rdist6 is supposed to be better, but no rdist after
Fri Nov 29 03:15:00 GMT 2002
U lib/libpam/modules/pam_ksu/pam_ksu.c
U release/doc/en_US.ISO8859-1/early-adopter/article.sgml
Running test variables
PASS: Test variables detected no regression, output matches.
Running test targets
PASS: Test targets detected no regression.
Running test sysvmatch
PAS
In message: <[EMAIL PROTECTED]>
Steve Kargl <[EMAIL PROTECTED]> writes:
: > - Please consider restoring rdist to FreeBSD. Thanks.
:
: No thanks. It was removed almost 2 years ago because
: better alternatives are available.
And the number of security problems with rdist are legion.
In message: <[EMAIL PROTECTED]>
Christian Brueffer <[EMAIL PROTECTED]> writes:
: got a reproducable panic while inserting a 3Com Megahertz 3CCFE575BT
: into an up to date -current system.
: The card used to work fine with DP1.
How up to date?
Warner
To Unsubscribe: send mail to [EMAI
this is a great guide
http://www.sonicspot.com/guide/wavefiles.html
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of
[EMAIL PROTECTED]
Sent: Thursday, November 28, 2002 6:51 PM
To: [EMAIL PROTECTED]
Subject: [music-dsp] How do I read the Loop information f
On Thu, 28 Nov 2002, Kris Kennaway wrote:
> gohan11 deadlocked tonight..here is the ps trace from DDB. Can
> someone make sense of this?
>
> pid proc addruid ppid pgrp flag stat wmesgwchan cmd
> 94345 c4a40938 d8d220000 94336 51933 0004000 norm[LOCK Giant c044bcc0] sed
On Thu, 28 Nov 2002, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, Riccardo Torrini write
> s:
> >I have 4 primary partitions and I use a boot manager (magic.com)
> >that install some black magic that hide unused partition, this
> >permit to have multiple 'other-OS' partition that don
On Fri, Nov 29, 2002 at 12:48:49AM +0100, Julian H. Stacey wrote:
> Kris Kennaway wrote:
> > On Thu, Nov 28, 2002 at 07:22:16PM +0100, Julian Stacey wrote:
> > > 5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
> > >=20
> > > rdist6 is supposed to be better, but no rdist after
On Thu, Nov 28, 2002 at 06:58:05PM -0500, Christian Brueffer wrote:
>
> Hi,
>
> got a reproducable panic while inserting a 3Com Megahertz 3CCFE575BT
> into an up to date -current system.
> The card used to work fine with DP1.
This might be from my recent changes to the resource allocator in
card
A freshly built system with Now 28 sources now throws the ACPI errors
seen in the dmesg output. The former ACPI snapshot did not complain in
any way on this system.
The board in question is a Gigabyte BX2000 with F7 BIOS.
--Thomas
dmesg:
> Copyright (c) 1992-2002 The FreeBSD Project.
> Cop
Hi,
got a reproducable panic while inserting a 3Com Megahertz 3CCFE575BT
into an up to date -current system.
The card used to work fine with DP1.
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0xdd79cd38
fault code = supervisor read, page not present
instr
Kris Kennaway wrote:
> On Thu, Nov 28, 2002 at 07:22:16PM +0100, Julian Stacey wrote:
> > 5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
> >=20
> > rdist6 is supposed to be better, but no rdist after basic install is a pa=
> in.
> >=20
> > Has this been well debated already ?
Thu Nov 28 21:15:00 GMT 2002
U lib/libc/net/if_nametoindex.c
U sys/sys/select.h
U sys/sys/signal.h
U tools/regression/usr.bin/make/Makefile
Running test variables
PASS: Test variables detected no regression, output matches.
Running test targets
PASS: Test targets detected no regression.
Running tes
On Fri, 2002-11-29 at 05:57, Daniel C. Sobral wrote:
> ntpdate_flags="-s -b 200.220.255.229":
>
> Nov 28 15:15:38 dcs ntpdate[259]: no server suitable for synchronization
> found
> Nov 28 15:15:39 dcs ntpd[377]: ntpd 4.1.1b-a Thu Nov 28 11:09:29 BRST
> 2002 (1)
> Nov 28 15:15:39 dcs ntpd[377]: k
In message <[EMAIL PROTECTED]>, Riccardo Torrini write
s:
>I have 4 primary partitions and I use a boot manager (magic.com)
>that install some black magic that hide unused partition, this
>permit to have multiple 'other-OS' partition that don't know of
>each other (but, obviously, FreeBSD can see a
In message <[EMAIL PROTECTED]>, Hiten Pandya writ
es:
>Is anyone planning to take this task, because, I think its important
>that it is fixed. Or should it be put on the 5.0-todo list? If not, we
>should put it in the BUGS section of mdconfig/ or the md(4) manual page.
>IMO.
I've tested the fix,
On Wed, Nov 27, 2002 at 11:37:17AM +, Ian Dowse wrote the words in effect of:
> In message <[EMAIL PROTECTED]>, Bruce Evans writes:
> >On Wed, 27 Nov 2002, Ian Dowse wrote:
> >> I think moving the line
> >>
> >>tsleep(sc, PRIBIO, "mdwait", 0);
> >>
> >> to just after the following `if' stat
I have 4 primary partitions and I use a boot manager (magic.com)
that install some black magic that hide unused partition, this
permit to have multiple 'other-OS' partition that don't know of
each other (but, obviously, FreeBSD can see and mount all of them).
As far as I know it use an EXOR 0x10 t
> 5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
>
> rdist6 is supposed to be better, but no rdist after basic install is a pain.
>
> Has this been well debated already ? or should I file a Send-PR ?
Debate over. Please install the port if you need rdist.
M
--
Mark Murray
Hello,
the new test for make which was made to run before every
make in src recently is IMHO a little bit too verbose.
I think it is a really useful thing to have but is it
really necessary to have it output 14 lines every time ?
I think it would be sufficent to have something like
this:
Testing fo
More information:
ntpdate_flags="-s -b clock.tcoip.com.br":
Nov 28 15:13:31 dcs ntpdate[259]: no server suitable for synchronization
found
ntpdate_flags="-s -b 200.220.255.229":
Nov 28 15:15:38 dcs ntpdate[259]: no server suitable for synchronization
found
Nov 28 15:15:39 dcs ntpd[377]: ntpd
On Wed, 27 Nov 2002, Mike Makonnen wrote:
> On Thu, Nov 28, 2002 at 01:31:26AM +0300, Sergey Mokryshev wrote:
> [ snip ]
> >
> > ldconfig does not have proper anchor and is mistakenly ordered to run
> > first (without any filesystems mounted (except R/O root) yet).
>
> This is a good example of wh
I found out that ntpdate just doesn't seem to be working at all during
boot. Ntpd dies because of the time differential (windows changes the
time two hours because of the TZ). No message from ntpdate (I'll next
try to divert it to syslog).
Running *after* boot, by typing /etc/rc.d/ntpdate start
On Thu, Nov 28, 2002 at 07:22:16PM +0100, Julian Stacey wrote:
> 5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
>
> rdist6 is supposed to be better, but no rdist after basic install is a pain.
>
> Has this been well debated already ? or should I file a Send-PR ?
It was mov
Emiel Kollof wrote:
> * Emiel Kollof ([EMAIL PROTECTED]) wrote:
> > > There were stupid mistakes in this patch. Can you try this one instead ?
> >
> > Yes, this one seems to work.
>
> Hold on.. now remote hosts _see_ the ext2fs share, but mounting will not
> work. Yes it will mount without fail
* Emiel Kollof ([EMAIL PROTECTED]) wrote:
> > There were stupid mistakes in this patch. Can you try this one instead ?
>
> Yes, this one seems to work.
Hold on.. now remote hosts _see_ the ext2fs share, but mounting will not
work. Yes it will mount without failing, but accessing won't work.
>F
Emiel Kollof wrote:
> * Maxime Henrion ([EMAIL PROTECTED]) wrote:
> >
> > There were stupid mistakes in this patch. Can you try this one instead ?
>
> Yes, this one seems to work.
I'm also interested in the panic you got with the previous broken patch.
What was the panic message ? Can you get
* Maxime Henrion ([EMAIL PROTECTED]) wrote:
>
> There were stupid mistakes in this patch. Can you try this one instead ?
Yes, this one seems to work.
Cheers,
Emiel
--
Good day to avoid cops. Crawl to school.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" i
5.0-DP2 (unlike 4.7) has no src/usr.bin/rdist - just ports/net/rdist6
rdist6 is supposed to be better, but no rdist after basic install is a pain.
Has this been well debated already ? or should I file a Send-PR ?
Julian Stacey
jhs @ berklix.com Computer Systems Engineer, Uni
* Maxime Henrion ([EMAIL PROTECTED]) wrote:
>
> There were stupid mistakes in this patch. Can you try this one instead ?
*grin* NOW you tell me... geez :)
Well, disregard that previous report then, is was based on your old
patch.
Cheers,
Emiel
To Unsubscribe: send mail to [EMAIL PROTECTED]
wi
* Maxime Henrion ([EMAIL PROTECTED]) wrote:
>
> Can you try the attached patch and tell me if it works ?
Tried it, and no, it doesn't work. Also, when I kill mountd and restart
it, I get a kernel panic. HUPping mountd just gives the same error.
Cheers,
Emiel
--
A diplomat is a man who can convi
Maxime Henrion wrote:
> Emiel Kollof wrote:
> > * Juli Mallett ([EMAIL PROTECTED]) wrote:
> >
> > > > kernel: ext2fs doesn't support the old mount syscall
> > > > mountd[344]: could not remount /storage: Operation not supported
> > >
> > > I have the same problem, more or less, with UFS :( I can
Emiel Kollof wrote:
> * Juli Mallett ([EMAIL PROTECTED]) wrote:
>
> > > kernel: ext2fs doesn't support the old mount syscall
> > > mountd[344]: could not remount /storage: Operation not supported
> >
> > I have the same problem, more or less, with UFS :( I can no longer set up
> > an NFS server,
> On Mon, Nov 25, 2002 at 10:46:00AM -0800, Sam Leffler wrote:
> > > > I don't see this problem; looutput looks to do the right thing.
FWIW
> > I've
> > > > passed mbufs w/ mtags through the loopback interface.
> > >
> > > This refers specifically to the following code snippet:
> > >
> > >
Hello all.
When I try to mount a CD it just hangs and sometime ( a minute or so )
later pops back as
acd0: TEST_UNIT_READY command timeout - resetting
ata0: resetting devices.
when it happened the first time, it automatically went into the debug mode
and i could see a trace
I appreciate the offer to go through the whole upgrade
process again, but I don't think it is necessary. If there
were going to be many anguished folks that had to go through
it, I would have played out all the senarios and made sure
they worked. The point of doing this change now was to fix
proble
Hi,
I tried to install a new firewall machine for my parents and tried using
5.0, because 4.7-STABLE find's the ata-controller only when I have
disabled in BIOS.
The results from 5.0-DP2 confuses me more.
I attach the dmesg.out - please help.
Kind regards,
Jens
--
L i W W W i
I've filed a bug report on this
http://www.freebsd.org/cgi/query-pr.cgi?pr=45684
but was wondering if anyone else had seen this message on an SMP machine.
Is it a known problem with a know work around? I'm running code from
11/24/02. Load averages and related things also read 0.
You can find
Hi,
I have tried 5.0-DP2 on a Toshiba Equium with the
Intel PR440FX motherboard. DP2 will boot from the CD, print
some, possibly all of the loader messsage, then immediately
cause a jump that is like pushing the reset button.
The system uses the CD at ata1-master and disks on SCSI.
Loading the sy
gohan11 deadlocked tonight..here is the ps trace from DDB. Can
someone make sense of this?
Kris
pid proc addruid ppid pgrp flag stat wmesgwchan cmd
94345 c4a40938 d8d220000 94336 51933 0004000 norm[LOCK Giant c044bcc0] sed
94344 c5334b10 d8f440000 94336 51933
subscribe
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
The same problem have taken in a toshiba satellite 3000-601 and the
solution is recompile a kernel without eisa driver and prove to install
new.
Bye
Jason dijo:
> I ama trying to install 5.0 dp2 (tried other boot disks as well,
> including 4.7) on my new toshiba laptop. Each and every time it lo
On 28 Nov 2002 at 0:05, Garance A Drosihn wrote...
> At 1:24 PM +0900 11/28/02, NAKAJI Hiroyuki wrote:
> > > In <[EMAIL PROTECTED]>
> >>Terry Lambert <[EMAIL PROTECTED]> wrote:
> >
> >> There are two "adduser" scripts. One is perl, and one was written
> >> to use "pw" and provi
On Thu, 28 Nov 2002, Emiel Kollof wrote:
> I'm having some odd trouble with exporting a ext2fs with NFS.
> ...
> Seems allright, no? Well, when I invoke or HUP mountd, the following
> happens:
>
> kernel: ext2fs doesn't support the old mount syscall
> mountd[344]: could not remount /storage: Opera
> > Then you'll get thermal operation messages, something like:
> > Nov 26 19:34:13 mybox kernel: acpi_tz0: _AC0: temperature 60.0 >=
> > setpoint 60.0
> > Nov 26 19:34:13 mybox kernel: acpi_tz0: switched from NONE to _AC0: 60.0C
> >
> > We need the messages like this, acpidump output, and sy
50 matches
Mail list logo
